hast du fortschritte machen können ?
Posts by schuetta
-
-
Da würde ich den Atric V5 empfehlen !! Klappt perfekt !
Da du ja schon Lirc nutzt würd ich mal ein
find / -name lircd.conf absetzen.
Hab den Pfad auch grad nicht im Kopf.
Gruß
-
habe mir das upnp-plugin auf der yavdr 0.er installiert. wmp 12 findet den server sofort, leider kann ich nichts abspielen ! es kommt nur
"Die Verbindung wurde von der Remotemedienbibliothek nicht zugelassen ....!Was muss ich tun ?
Gruß
-
lieg ich richtig, kann das szenario so auftreten ?
-
hab mich nun etwas mit der materie beschäftigt.
wäre folgendes szenario möglich:ich habe eine passive quadro lnb mit integriertem multischalter.
nun denke ich dass die schaltspannung der karte nicht ausreicht, dieses damals nicht auffiel, da ich auf einem weiteren anschluss einen dvb-s receiver im dauerbetrieb hatte. jetzt wo dieser weg ist und die lnb nicht mehr mit strom versorgt bekomm ich kaum noch sender ? soweit möglich ?abhilfe würde folglich nur ne neue lnb+aktivem multischalter, bzw. die möglichkeit das schaltsignal zu verstärken in frage kommen ?!?!?
gruß
-
habe gestern per aptitude remove den liplian treiber deinstalliert und den v4L treiber installiert. genau das gleiche phänomen !
eins extra ,ard hd , zdf hd funktionieren ! ard, pro7, zdf net
-
mmmh, könnte es eventuell sein das meine karte doch defekt ist und nicht die benötigte spannung zum schalten der lnb aufbringt ??
-
dann ikst es ok, wenn die paytv-kanäle quasi übersprungen werden.
erzähl mir doch lieber wie du die fta kanäle bekommen hast -
hier war eben die rede von "passenden Modulparametern" für die Tevii ! wo setzte ich diese und wie müssen sie lauten ?
-
ist alles korrekt, fehler bei dmesg taucht auch nicht mehr auf !
EinsPlus läuft zb super, ARD gar nicht, ich hab keinen plan
-
-
habt ihr vielleicht mal eine andere channels.conf zum testen ?
-
lnb einstellungen sind korrekt , sorry lade die logs nochmal
Code
Display MoreOct 19 23:07:16 yavdr kernel: [ 13.710046] usb 1-6.3: Number of endpoints 2 Oct 19 23:07:16 yavdr kernel: [ 13.710054] usb 1-6.3: Endpoint 1 MaxPacketSize 64 Oct 19 23:07:16 yavdr kernel: [ 13.710061] usb 1-6.3: Endpoint 2 MaxPacketSize 64 Oct 19 23:07:16 yavdr kernel: [ 13.710068] usb 1-6.3: Setting MaxPacketSize 64 Oct 19 23:07:16 yavdr kernel: [ 13.710474] usb 1-6.3: FTDI USB Serial Device converter now attached to ttyUSB0 Oct 19 23:07:16 yavdr kernel: [ 13.710786] usbcore: registered new interface driver ftdi_sio Oct 19 23:07:16 yavdr kernel: [ 13.710794] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver Oct 19 23:07:16 yavdr kernel: [ 13.822195] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input6 Oct 19 23:07:16 yavdr kernel: [ 13.823639] logitech 0003:046D:C71F.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.0-2.3/input0 Oct 19 23:07:16 yavdr kernel: [ 14.040515] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19 Oct 19 23:07:16 yavdr kernel: [ 14.040560] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19 Oct 19 23:07:17 yavdr kernel: [ 14.092662] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 Oct 19 23:07:17 yavdr kernel: [ 14.092779] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 Oct 19 23:07:17 yavdr kernel: [ 14.095199] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 Oct 19 23:07:17 yavdr kernel: [ 14.095216] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 Oct 19 23:07:17 yavdr kernel: [ 14.095227] hda_intel: Disable MSI for Nvidia chipset Oct 19 23:07:17 yavdr kernel: [ 14.176238] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Oct 19 23:07:17 yavdr kernel: [ 14.191836] Linux video capture interface: v2.00 Oct 19 23:07:17 yavdr kernel: [ 14.260446] cx23885 driver version 0.0.2 loaded Oct 19 23:07:17 yavdr kernel: [ 14.261607] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 18 Oct 19 23:07:17 yavdr kernel: [ 14.261645] cx23885 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 18 (level, low) -> IRQ 18 Oct 19 23:07:17 yavdr kernel: [ 14.261831] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] Oct 19 23:07:17 yavdr kernel: [ 14.451845] cx23885_dvb_register() allocating 1 frontend(s) Oct 19 23:07:17 yavdr kernel: [ 14.468131] cx23885[0]: cx23885 based dvb card Oct 19 23:07:17 yavdr kernel: [ 14.514153] DS3000 chip version: 0.192 attached. Oct 19 23:07:17 yavdr kernel: [ 14.514164] DVB: registering new adapter (cx23885[0]) Oct 19 23:07:17 yavdr kernel: [ 14.514173] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... Oct 19 23:07:17 yavdr kernel: [ 14.515836] Registered led device: ath9k-phy0::radio Oct 19 23:07:17 yavdr kernel: [ 14.515889] Registered led device: ath9k-phy0::assoc Oct 19 23:07:17 yavdr kernel: [ 14.515940] Registered led device: ath9k-phy0::tx Oct 19 23:07:17 yavdr kernel: [ 14.515991] Registered led device: ath9k-phy0::rx Oct 19 23:07:17 yavdr kernel: [ 14.516057] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xefee0000, irq=19 Oct 19 23:07:17 yavdr kernel: [ 14.542376] TeVii S470 MAC= 00:18:BD:5B:21:03 Oct 19 23:07:17 yavdr kernel: [ 14.542388] cx23885_dev_checkrevision() Hardware revision = 0xb0 Oct 19 23:07:17 yavdr kernel: [ 14.542405] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfac00000 Oct 19 23:07:17 yavdr kernel: [ 14.542432] IRQ 18/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs Oct 19 23:07:18 yavdr kernel: [ 15.022464] hda_codec: ALC662 rev1: BIOS auto-probing. Oct 19 23:07:18 yavdr kernel: [ 15.317783] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input7 Oct 19 23:07:18 yavdr vdr: [1280] [xine..put] Listening on address '127.0.0.1' port 37890 Oct 19 23:07:18 yavdr vdr: [1401] [xine..put] Listening on port 37890 Oct 19 23:07:18 yavdr vdr: [1401] [xine..put] Listening for UDP broadcasts on port 37890 Oct 19 23:07:19 yavdr vdr: [1445] [xine..put] Detected video size 1280x720 Oct 19 23:07:21 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52913 Oct 19 23:07:21 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:21 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [vdr-fe] Detected 4 CPUs Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 23:07:22 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52914 Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1280/pipe.0 Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Data stream connected (PIPE) Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1506] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1512] [vdr-fe] Keyboard thread terminated Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1511] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:48 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 23:07:48 yavdr dvbmon: vdr started by udev allready Oct 19 23:07:50 yavdr kernel: [ 47.320955] vdr-sxfe[1483]: segfault at 0 ip 004a46fc sp bfb349c8 error 4 in libc-2.11.1.so[3c4000+153000] Oct 19 23:07:50 yavdr vdr: [1445] [xine..put] cXinelibServer::Play Buffer overflow (TCP/PIPE) Oct 19 23:07:50 yavdr vdr: last message repeated 273 times Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52916 Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Detected 4 CPUs Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52917 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1280/pipe.0 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Data stream connected (PIPE) Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1576] [vdr-fe] Keyboard thread terminated Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1574] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] Detected video size 1280x720 Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [input_vdr] wait_stream_sync: discard_index 49665840 != curpos 49506040 ! (diff 159800) Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:57 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200324 bytes/s (1565 kbit/s) Oct 19 23:07:58 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:07:59 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(0): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(1): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(2): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:03 yavdr vdr: [1588] [xine..put] OSD bandwidth: 207552 bytes/s (1621 kbit/s) Oct 19 23:08:07 yavdr vdr: [1280] [xine..put] OSD bandwidth: 342267 bytes/s (2673 kbit/s) Oct 19 23:08:08 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Code
Display MoreOct 19 23:07:22 yavdr vdr: [1401] [xine..put] cTcpWriter initialized (buffer 512 kb) Oct 19 23:07:22 yavdr vdr: [1401] [xine..put] Pipe open Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] Data stream connected (PIPE) Oct 19 23:07:22 yavdr vdr-sxfe[1483]: [1483] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1506] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1512] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1512] [vdr-fe] Keyboard thread terminated Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1511] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:24 yavdr vdr: [1454] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1454) Oct 19 23:07:28 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111362 Oct 19 23:07:31 yavdr vdr: [1390] changing pids of channel 44 from 6210+6210=27:6221=deu@3,6222=fra@3;6220=deu@106:0:6230 to 6210+6210=27:6221=deu@3,6222=fra@3;6220=deu@106:6231=fra:6230 Oct 19 23:07:48 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 23:07:48 yavdr dvbmon: vdr started by udev allready Oct 19 23:07:50 yavdr vdr: [1445] [xine..put] cXinelibServer::Play Buffer overflow (TCP/PIPE) Oct 19 23:07:50 yavdr vdr: last message repeated 273 times Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1504] [xine..put] cBackgroundWriter: TCP write error Oct 19 23:07:50 yavdr vdr: [1504] [xine..put] (ERROR (tools/backgroundwriter.c,247): Broken pipe) Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52916 Oct 19 23:07:50 yavdr vdr: [1401] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): No such file or directory) Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Detected 4 CPUs Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52917 Oct 19 23:07:51 yavdr vdr: [1401] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Trying PIPE connection ... Oct 19 23:07:51 yavdr vdr: [1401] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1280 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1280/pipe.0 Oct 19 23:07:51 yavdr vdr: [1401] removing /var/lib/vdr/plugins/xineliboutput/pipes.1280 Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cBackgroundWriterI initialized (buffer 512 kb) Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Data stream connected (PIPE) Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cTcpWriter initialized (buffer 512 kb) Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Pipe open Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1576] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1576] [vdr-fe] Keyboard thread terminated Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1574] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:56 yavdr vdr: [1580] Text2Skin: channelInfo display update thread started (pid=1280, tid=1580) Oct 19 23:07:56 yavdr vdr: [1280] switching to channel 2 Oct 19 23:07:56 yavdr vdr: [1451] TS buffer on device 1 thread ended (pid=1280, tid=1451) Oct 19 23:07:56 yavdr vdr: [1445] buffer stats: 305124 (14%) used Oct 19 23:07:56 yavdr vdr: [1445] receiver on device 1 thread ended (pid=1280, tid=1445) Oct 19 23:07:56 yavdr vdr: [1581] receiver on device 1 thread started (pid=1280, tid=1581) Oct 19 23:07:56 yavdr vdr: [1582] TS buffer on device 1 thread started (pid=1280, tid=1582) Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264: Found NAL SPS at offset 6/151 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: profile_idc 77 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: pic_width: 80 mbs Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: pic_height: 45 mbs Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: frame only flag: 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] Detected video size 1280x720 Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [input_vdr] wait_stream_sync: discard_index 49665840 != curpos 49506040 ! (diff 159800) Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:57 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200324 bytes/s (1565 kbit/s) Oct 19 23:07:58 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:07:59 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:08:00 yavdr vdr: [1580] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1580) Oct 19 23:08:00 yavdr vdr: [1583] Text2Skin: menu display update thread started (pid=1280, tid=1583) Oct 19 23:08:01 yavdr vdr: [1583] Text2Skin: menu display update thread ended (pid=1280, tid=1583) Oct 19 23:08:02 yavdr vdr: [1587] Text2Skin: menu display update thread started (pid=1280, tid=1587) Oct 19 23:08:02 yavdr vdr: [1587] Text2Skin: menu display update thread ended (pid=1280, tid=1587) Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(0): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(1): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(2): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr: [1588] Text2Skin: menu display update thread started (pid=1280, tid=1588) Oct 19 23:08:03 yavdr vdr: [1588] [xine..put] OSD bandwidth: 207552 bytes/s (1621 kbit/s) Oct 19 23:08:07 yavdr vdr: [1280] switching to channel 5 Oct 19 23:08:07 yavdr vdr: [1582] TS buffer on device 1 thread ended (pid=1280, tid=1582) Oct 19 23:08:07 yavdr vdr: [1581] buffer stats: 177472 (8%) used Oct 19 23:08:07 yavdr vdr: [1581] receiver on device 1 thread ended (pid=1280, tid=1581) Oct 19 23:08:07 yavdr vdr: [1592] receiver on device 1 thread started (pid=1280, tid=1592) Oct 19 23:08:07 yavdr vdr: [1588] Text2Skin: menu display update thread ended (pid=1280, tid=1588) Oct 19 23:08:07 yavdr vdr: [1593] TS buffer on device 1 thread started (pid=1280, tid=1593) Oct 19 23:08:07 yavdr vdr: [1280] [xine..put] OSD bandwidth: 342267 bytes/s (2673 kbit/s) Oct 19 23:08:07 yavdr vdr: [1594] Text2Skin: channelInfo display update thread started (pid=1280, tid=1594) Oct 19 23:08:08 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:08:12 yavdr vdr: [1594] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1594) Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:08:17 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 5, tp 112544 Oct 19 23:09:22 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 5, tp 112544
Code
Display MoreOct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1483] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:23 yavdr kernel: [ 20.289029] eth0: no IPv6 routers present Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1506] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1512] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1512] [vdr-fe] Keyboard thread terminated Oct 19 23:07:23 yavdr vdr-sxfe[1483]: [1511] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:24 yavdr vdr: [1454] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1454) Oct 19 23:07:28 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111362 Oct 19 23:07:31 yavdr vdr: [1390] changing pids of channel 44 from 6210+6210=27:6221=deu@3,6222=fra@3;6220=deu@106:0:6230 to 6210+6210=27:6221=deu@3,6222=fra@3;6220=deu@106:6231=fra:6230 Oct 19 23:07:48 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 23:07:48 yavdr dvbmon: vdr started by udev allready Oct 19 23:07:50 yavdr kernel: [ 47.320955] vdr-sxfe[1483]: segfault at 0 ip 004a46fc sp bfb349c8 error 4 in libc-2.11.1.so[3c4000+153000] Oct 19 23:07:50 yavdr vdr: [1445] [xine..put] cXinelibServer::Play Buffer overflow (TCP/PIPE) Oct 19 23:07:50 yavdr vdr: last message repeated 273 times Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1504] [xine..put] cBackgroundWriter: TCP write error Oct 19 23:07:50 yavdr vdr: [1504] [xine..put] (ERROR (tools/backgroundwriter.c,247): Broken pipe) Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:50 yavdr init: vdr-frontend main process (1458) terminated with status 139 Oct 19 23:07:50 yavdr init: vdr-frontend main process ended, respawning Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52916 Oct 19 23:07:50 yavdr vdr: [1401] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Client connection 0 closed Oct 19 23:07:50 yavdr vdr: [1401] [xine..put] Closing connection 0 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): No such file or directory) Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Detected 4 CPUs Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Client 0 connected: 127.0.0.1:52917 Oct 19 23:07:51 yavdr vdr: [1401] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Trying PIPE connection ... Oct 19 23:07:51 yavdr vdr: [1401] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1280 Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1280/pipe.0 Oct 19 23:07:51 yavdr vdr: [1401] removing /var/lib/vdr/plugins/xineliboutput/pipes.1280 Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cBackgroundWriterI initialized (buffer 512 kb) Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] Data stream connected (PIPE) Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] cTcpWriter initialized (buffer 512 kb) Oct 19 23:07:51 yavdr vdr: [1401] [xine..put] Pipe open Oct 19 23:07:51 yavdr vdr-sxfe[1563]: [1563] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1563] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1576] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1576] [vdr-fe] Keyboard thread terminated Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1574] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 23:07:52 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:56 yavdr vdr: [1580] Text2Skin: channelInfo display update thread started (pid=1280, tid=1580) Oct 19 23:07:56 yavdr vdr: [1280] switching to channel 2 Oct 19 23:07:56 yavdr vdr: [1451] TS buffer on device 1 thread ended (pid=1280, tid=1451) Oct 19 23:07:56 yavdr vdr: [1445] buffer stats: 305124 (14%) used Oct 19 23:07:56 yavdr vdr: [1445] receiver on device 1 thread ended (pid=1280, tid=1445) Oct 19 23:07:56 yavdr vdr: [1581] receiver on device 1 thread started (pid=1280, tid=1581) Oct 19 23:07:56 yavdr vdr: [1582] TS buffer on device 1 thread started (pid=1280, tid=1582) Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264: Found NAL SPS at offset 6/151 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: profile_idc 77 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: pic_width: 80 mbs Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: pic_height: 45 mbs Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: frame only flag: 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 19 23:07:56 yavdr vdr: [1581] [xine..put] Detected video size 1280x720 Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [input_vdr] wait_stream_sync: discard_index 49665840 != curpos 49506040 ! (diff 159800) Oct 19 23:07:57 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:07:57 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200324 bytes/s (1565 kbit/s) Oct 19 23:07:58 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:07:59 yavdr vdr: [1580] [xine..put] OSD bandwidth: 200264 bytes/s (1564 kbit/s) Oct 19 23:08:00 yavdr vdr: [1580] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1580) Oct 19 23:08:00 yavdr vdr: [1583] Text2Skin: menu display update thread started (pid=1280, tid=1583) Oct 19 23:08:01 yavdr vdr: [1583] Text2Skin: menu display update thread ended (pid=1280, tid=1583) Oct 19 23:08:02 yavdr vdr: [1587] Text2Skin: menu display update thread started (pid=1280, tid=1587) Oct 19 23:08:02 yavdr vdr: [1587] Text2Skin: menu display update thread ended (pid=1280, tid=1587) Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(0): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(1): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_osd] OSD_Close(2): non-existing OSD ! Oct 19 23:08:02 yavdr vdr-sxfe[1563]: [1574] [input_vdr] invalid parameter in control message OSDCMD Oct 19 23:08:02 yavdr vdr: [1588] Text2Skin: menu display update thread started (pid=1280, tid=1588) Oct 19 23:08:03 yavdr vdr: [1588] [xine..put] OSD bandwidth: 207552 bytes/s (1621 kbit/s) Oct 19 23:08:07 yavdr vdr: [1280] switching to channel 5 Oct 19 23:08:07 yavdr vdr: [1582] TS buffer on device 1 thread ended (pid=1280, tid=1582) Oct 19 23:08:07 yavdr vdr: [1581] buffer stats: 177472 (8%) used Oct 19 23:08:07 yavdr vdr: [1581] receiver on device 1 thread ended (pid=1280, tid=1581) Oct 19 23:08:07 yavdr vdr: [1592] receiver on device 1 thread started (pid=1280, tid=1592) Oct 19 23:08:07 yavdr vdr: [1588] Text2Skin: menu display update thread ended (pid=1280, tid=1588) Oct 19 23:08:07 yavdr vdr: [1593] TS buffer on device 1 thread started (pid=1280, tid=1593) Oct 19 23:08:07 yavdr vdr: [1280] [xine..put] OSD bandwidth: 342267 bytes/s (2673 kbit/s) Oct 19 23:08:07 yavdr vdr: [1594] Text2Skin: channelInfo display update thread started (pid=1280, tid=1594) Oct 19 23:08:08 yavdr vdr-sxfe[1563]: [1575] [demux_vdr] PMT changed, resetting demuxer Oct 19 23:08:12 yavdr vdr: [1594] Text2Skin: channelInfo display update thread ended (pid=1280, tid=1594) Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 23:08:16 yavdr vdr-sxfe[1563]: [1575] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 23:08:17 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 5, tp 112544 Oct 19 23:09:22 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 5, tp 112544
-
channels.conf folgt
CodeOct 19 22:55:17 yavdr kernel: [ 9.204549] ACPI: This conflict may cause random problems and system instability Oct 19 22:55:17 yavdr kernel: [ 9.204555] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 19 22:55:17 yavdr kernel: [ 9.204644] i2c i2c-1: nForce2 SMBus adapter at 0x4e00 Oct 19 22:55:17 yavdr kernel: [ 9.303084] Linux agpgart interface v0.103 Oct 19 22:55:17 yavdr kernel: [ 9.749231] nvidia: module license 'NVIDIA' taints kernel. Oct 19 22:55:17 yavdr kernel: [ 9.749241] Disabling lock debugging due to kernel taint Oct 19 22:55:19 yavdr kernel: [ 13.250052] usbcore: registered new interface driver hiddev Oct 19 22:55:19 yavdr kernel: [ 13.258281] input: MCE-IR-Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4:1.0/input/input3 Oct 19 22:55:19 yavdr kernel: [ 13.258532] generic-usb 0003:1130:6604.0001: input,hidraw0: USB HID v1.10 Keyboard [MCE-IR-Receiver] on usb-0000:00:04.0-4/input0 Oct 19 22:55:19 yavdr kernel: [ 13.275505] input: MCE-IR-Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4:1.1/input/input4 Oct 19 22:55:19 yavdr kernel: [ 13.275850] generic-usb 0003:1130:6604.0002: input,hidraw1: USB HID v1.10 Mouse [MCE-IR-Receiver] on usb-0000:00:04.0-4/input1 Oct 19 22:55:19 yavdr kernel: [ 13.286073] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input5 Oct 19 22:55:19 yavdr kernel: [ 13.286346] generic-usb 0003:046D:C71E.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.0-2.2/input0 Oct 19 22:55:19 yavdr kernel: [ 13.289766] usbcore: registered new interface driver usbhid Oct 19 22:55:19 yavdr kernel: [ 13.289777] usbhid: v2.6:USB HID core driver Oct 19 22:55:19 yavdr kernel: [ 13.302133] cfg80211: Calling CRDA to update world regulatory domain Oct 19 22:55:19 yavdr kernel: [ 13.307860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Oct 19 22:55:19 yavdr kernel: [ 13.389335] usbcore: registered new interface driver usbserial Oct 19 22:55:19 yavdr kernel: [ 13.389378] USB Serial support registered for generic Oct 19 22:55:19 yavdr kernel: [ 13.395520] lp: driver loaded but no devices found Oct 19 22:55:19 yavdr kernel: [ 13.402834] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input6 Oct 19 22:55:19 yavdr kernel: [ 13.404632] logitech 0003:046D:C71F.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:04.0-2.3/input0 Oct 19 22:55:19 yavdr kernel: [ 13.404718] usbcore: registered new interface driver usbserial_generic Oct 19 22:55:19 yavdr kernel: [ 13.404726] usbserial: USB Serial Driver core Oct 19 22:55:19 yavdr kernel: [ 13.460870] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20 Oct 19 22:55:19 yavdr kernel: [ 13.460883] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20 Oct 19 22:55:19 yavdr kernel: [ 13.461745] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23 Oct 19 22:55:19 yavdr kernel: [ 13.461756] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23 Oct 19 22:55:19 yavdr kernel: [ 13.461778] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem Oct 19 22:55:19 yavdr kernel: [ 13.462399] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.12 Fri Oct 8 13:22:24 PDT 2010 Oct 19 22:55:19 yavdr kernel: [ 13.528787] RPC: Registered udp transport module. Oct 19 22:55:19 yavdr kernel: [ 13.528797] RPC: Registered tcp transport module. Oct 19 22:55:19 yavdr kernel: [ 13.528804] RPC: Registered tcp NFSv4.1 backchannel transport module. Oct 19 22:55:19 yavdr kernel: [ 13.628484] USB Serial support registered for FTDI USB Serial Device Oct 19 22:55:19 yavdr kernel: [ 13.628770] ftdi_sio 1-6.3:1.0: FTDI USB Serial Device converter detected Oct 19 22:55:19 yavdr kernel: [ 13.628864] usb 1-6.3: Detected FT232RL Oct 19 22:55:19 yavdr kernel: [ 13.628872] usb 1-6.3: Number of endpoints 2 Oct 19 22:55:19 yavdr kernel: [ 13.628879] usb 1-6.3: Endpoint 1 MaxPacketSize 64 Oct 19 22:55:19 yavdr kernel: [ 13.628885] usb 1-6.3: Endpoint 2 MaxPacketSize 64 Oct 19 22:55:19 yavdr kernel: [ 13.628892] usb 1-6.3: Setting MaxPacketSize 64 Oct 19 22:55:19 yavdr kernel: [ 13.629686] usb 1-6.3: FTDI USB Serial Device converter now attached to ttyUSB0 Oct 19 22:55:19 yavdr kernel: [ 13.629802] usbcore: registered new interface driver ftdi_sio Oct 19 22:55:19 yavdr kernel: [ 13.629809] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver Oct 19 22:55:19 yavdr kernel: [ 13.871404] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 Oct 19 22:55:19 yavdr kernel: [ 13.871521] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 Oct 19 22:55:19 yavdr kernel: [ 13.872691] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 Oct 19 22:55:19 yavdr kernel: [ 13.872706] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 Oct 19 22:55:19 yavdr kernel: [ 13.872717] hda_intel: Disable MSI for Nvidia chipset Oct 19 22:55:19 yavdr kernel: [ 13.923730] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19 Oct 19 22:55:19 yavdr kernel: [ 13.923772] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19 Oct 19 22:55:19 yavdr kernel: [ 13.998367] Linux video capture interface: v2.00 Oct 19 22:55:20 yavdr kernel: [ 14.040556] cx23885 driver version 0.0.2 loaded Oct 19 22:55:20 yavdr kernel: [ 14.041676] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 18 Oct 19 22:55:20 yavdr kernel: [ 14.041713] cx23885 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 18 (level, low) -> IRQ 18 Oct 19 22:55:20 yavdr kernel: [ 14.041905] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] Oct 19 22:55:20 yavdr kernel: [ 14.190379] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Oct 19 22:55:20 yavdr kernel: [ 14.220263] cx23885_dvb_register() allocating 1 frontend(s) Oct 19 22:55:20 yavdr kernel: [ 14.220276] cx23885[0]: cx23885 based dvb card Oct 19 22:55:20 yavdr kernel: [ 14.256513] DS3000 chip version: 0.192 attached. Oct 19 22:55:20 yavdr kernel: [ 14.256526] DVB: registering new adapter (cx23885[0]) Oct 19 22:55:20 yavdr kernel: [ 14.256536] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... Oct 19 22:55:20 yavdr kernel: [ 14.285594] TeVii S470 MAC= 00:18:BD:5B:21:03 Oct 19 22:55:20 yavdr kernel: [ 14.285607] cx23885_dev_checkrevision() Hardware revision = 0xb0 Oct 19 22:55:20 yavdr kernel: [ 14.285625] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfac00000 Oct 19 22:55:20 yavdr kernel: [ 14.285653] IRQ 18/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs Oct 19 22:55:20 yavdr kernel: [ 14.370352] Registered led device: ath9k-phy0::radio Oct 19 22:55:20 yavdr kernel: [ 14.370417] Registered led device: ath9k-phy0::assoc Oct 19 22:55:20 yavdr kernel: [ 14.370490] Registered led device: ath9k-phy0::tx Oct 19 22:55:20 yavdr kernel: [ 14.370569] Registered led device: ath9k-phy0::rx Oct 19 22:55:20 yavdr kernel: [ 14.370623] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf1200000, irq=19 Oct 19 22:55:20 yavdr kernel: [ 14.740190] hda_codec: ALC662 rev1: BIOS auto-probing. Oct 19 22:55:21 yavdr kernel: [ 15.028275] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input7 Oct 19 22:55:21 yavdr vdr: [1272] [xine..put] Listening on address '127.0.0.1' port 37890 Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] Listening on port 37890 Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] Listening for UDP broadcasts on port 37890 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] Detected video size 1920x1080 Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46173 Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client connection 0 closed Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Closing connection 0 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Detected 4 CPUs Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46174 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1272/pipe.0 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Data stream connected (PIPE) Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1510] [vdr-fe] Keyboard thread terminated Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1508] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:27 yavdr vdr: [1272] [xine..put] OSD bandwidth: 324520 bytes/s (2535 kbit/s) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [input_vdr] wait_stream_sync: discard_index 11460480 != curpos 11452960 ! (diff 7520) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:51 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 22:55:51 yavdr dvbmon: vdr started by udev allready
CodeOct 19 22:55:21 yavdr vdr: [1396] Remote decoder/display server (cXinelibServer) thread started (pid=1272, tid=1396) Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99] Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] Binding server to 127.0.0.1:37890 Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] Listening on port 37890 Oct 19 22:55:21 yavdr vdr: [1396] [xine..put] Listening for UDP broadcasts on port 37890 Oct 19 22:55:21 yavdr vdr: [1396] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server address: 127.0.0.1#015#012Server version: xineliboutput-1.0.90-cvs#015#012#015 Oct 19 22:55:21 yavdr vdr: [1390] section handler thread started (pid=1272, tid=1390) Oct 19 22:55:21 yavdr vdr: [1272] [xine..put] cXinelibDevice::StartDevice(): Device started Oct 19 22:55:21 yavdr vdr: [1272] starting plugin: text2skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: wirbelscan Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: menuorg Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: quickepgsearch Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: extrecmenu Oct 19 22:55:22 yavdr vdr: [1450] extrecmenu worker thread thread started (pid=1272, tid=1450) Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: live Oct 19 22:55:22 yavdr vdr: [1272] LIVE: initial file cache has 82 entries and needs 381406 bytes of data! Oct 19 22:55:22 yavdr vdr: [1272] setting current skin to "anthra_1920_FS" Oct 19 22:55:22 yavdr vdr: [1272] loading /var/lib/vdr/themes/anthra_1920_FS-yabluelight.theme Oct 19 22:55:22 yavdr vdr: [1272] ERROR: /dev/lircd: No such file or directory Oct 19 22:55:22 yavdr vdr: [1272] ERROR: remote control LIRC not ready! Oct 19 22:55:22 yavdr vdr: [1272] switching to channel 9 Oct 19 22:55:22 yavdr vdr: [1453] receiver on device 1 thread started (pid=1272, tid=1453) Oct 19 22:55:22 yavdr vdr: [1272] setting watchdog timer to 60 seconds Oct 19 22:55:22 yavdr vdr: [1451] ERROR: Unable to load cert/key (/var/lib/vdr/plugins/live/live.pem//var/lib/vdr/plugins/live/live-key.pem): No such file or directory Oct 19 22:55:22 yavdr vdr: [1454] TS buffer on device 1 thread started (pid=1272, tid=1454) Oct 19 22:55:22 yavdr vdr: [1272] OSD size changed to 1920x1080 @ 1 Oct 19 22:55:22 yavdr vdr: [1462] Text2Skin: channelInfo display update thread started (pid=1272, tid=1462) Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264: Found NAL SPS at offset 6/151 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: profile_idc 77 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: pic_width: 120 mbs Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: pic_height: 34 mbs Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: frame only flag: 0 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: MBAFF Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: cropping 0 0 0 2 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: -> video size 1920x1080, aspect 1:1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] Detected video size 1920x1080 Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46173 Oct 19 22:55:24 yavdr vdr: [1396] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client connection 0 closed Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Closing connection 0 Oct 19 22:55:24 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message Oct 19 22:55:24 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): No such file or directory) Oct 19 22:55:24 yavdr vdr: [1272] max. latency time 3 seconds Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Detected 4 CPUs Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46174 Oct 19 22:55:25 yavdr vdr: [1396] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Trying PIPE connection ... Oct 19 22:55:25 yavdr vdr: [1396] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1272 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1272/pipe.0 Oct 19 22:55:25 yavdr vdr: [1396] removing /var/lib/vdr/plugins/xineliboutput/pipes.1272 Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cBackgroundWriterI initialized (buffer 512 kb) Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cTcpWriter initialized (buffer 512 kb) Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Pipe open Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Data stream connected (PIPE) Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 22:55:25 yavdr vdr: [1394] EPGSearch: timer conflict check started Oct 19 22:55:25 yavdr vdr: [1394] EPGSearch: timer conflict check finished Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1510] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1510] [vdr-fe] Keyboard thread terminated Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1508] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:27 yavdr vdr: [1462] Text2Skin: channelInfo display update thread ended (pid=1272, tid=1462) Oct 19 22:55:27 yavdr vdr: [1272] [xine..put] OSD bandwidth: 324520 bytes/s (2535 kbit/s) Oct 19 22:55:31 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 9, tp 111302 Oct 19 22:55:33 yavdr vdr: [1542] Text2Skin: channelInfo display update thread started (pid=1272, tid=1542) Oct 19 22:55:34 yavdr vdr: [1272] switching to channel 1 Oct 19 22:55:34 yavdr vdr: [1454] TS buffer on device 1 thread ended (pid=1272, tid=1454) Oct 19 22:55:34 yavdr vdr: [1453] buffer stats: 324864 (15%) used Oct 19 22:55:34 yavdr vdr: [1453] receiver on device 1 thread ended (pid=1272, tid=1453) Oct 19 22:55:34 yavdr vdr: [1543] receiver on device 1 thread started (pid=1272, tid=1543) Oct 19 22:55:34 yavdr vdr: [1544] TS buffer on device 1 thread started (pid=1272, tid=1544) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [input_vdr] wait_stream_sync: discard_index 11460480 != curpos 11452960 ! (diff 7520) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:39 yavdr vdr: [1542] Text2Skin: channelInfo display update thread ended (pid=1272, tid=1542) Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:43 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111836 Oct 19 22:55:51 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 22:55:51 yavdr dvbmon: vdr started by udev allready Oct 19 22:56:48 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111836
CodeOct 19 22:55:21 yavdr kernel: [ 15.860329] groups: 1,3 (cpu_power = 1178) Oct 19 22:55:21 yavdr kernel: [ 15.860338] domain 2: span 0-3 level CPU Oct 19 22:55:21 yavdr kernel: [ 15.860343] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.skin Oct 19 22:55:21 yavdr init: logo-start post-stop process (1288) terminated with status 2 Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.skin Oct 19 22:55:21 yavdr vdr: [1272] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors Oct 19 22:55:21 yavdr vdr: [1272] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: wirbelscan Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: menuorg Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: quickepgsearch Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: extrecmenu Oct 19 22:55:22 yavdr vdr: [1450] extrecmenu worker thread thread started (pid=1272, tid=1450) Oct 19 22:55:22 yavdr vdr: [1272] starting plugin: live Oct 19 22:55:22 yavdr vdr: [1272] LIVE: initial file cache has 82 entries and needs 381406 bytes of data! Oct 19 22:55:22 yavdr vdr: [1272] setting current skin to "anthra_1920_FS" Oct 19 22:55:22 yavdr vdr: [1272] loading /var/lib/vdr/themes/anthra_1920_FS-yabluelight.theme Oct 19 22:55:22 yavdr vdr: [1272] ERROR: /dev/lircd: No such file or directory Oct 19 22:55:22 yavdr vdr: [1272] ERROR: remote control LIRC not ready! Oct 19 22:55:22 yavdr vdr: [1272] switching to channel 9 Oct 19 22:55:22 yavdr vdr: [1453] receiver on device 1 thread started (pid=1272, tid=1453) Oct 19 22:55:22 yavdr vdr: [1272] setting watchdog timer to 60 seconds Oct 19 22:55:22 yavdr vdr: [1451] ERROR: Unable to load cert/key (/var/lib/vdr/plugins/live/live.pem//var/lib/vdr/plugins/live/live-key.pem): No such file or directory Oct 19 22:55:22 yavdr vdr: [1454] TS buffer on device 1 thread started (pid=1272, tid=1454) Oct 19 22:55:22 yavdr vdr: [1272] OSD size changed to 1920x1080 @ 1 Oct 19 22:55:22 yavdr vdr: [1462] Text2Skin: channelInfo display update thread started (pid=1272, tid=1462) Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264: Found NAL SPS at offset 6/151 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: profile_idc 77 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: pic_width: 120 mbs Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: pic_height: 34 mbs Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: frame only flag: 0 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: MBAFF Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: cropping 0 0 0 2 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] H.264 SPS: -> video size 1920x1080, aspect 1:1 Oct 19 22:55:22 yavdr vdr: [1453] [xine..put] Detected video size 1920x1080 Oct 19 22:55:22 yavdr acpid: client 1042[0:0] has disconnected Oct 19 22:55:22 yavdr acpid: client 1042[0:0] has disconnected Oct 19 22:55:22 yavdr acpid: client connected from 1042[0:0] Oct 19 22:55:22 yavdr acpid: 1 client rule loaded Oct 19 22:55:22 yavdr acpid: client connected from 1042[0:0] Oct 19 22:55:22 yavdr acpid: 1 client rule loaded Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46173 Oct 19 22:55:24 yavdr vdr: [1396] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Client connection 0 closed Oct 19 22:55:24 yavdr vdr: [1396] [xine..put] Closing connection 0 Oct 19 22:55:24 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message Oct 19 22:55:24 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): No such file or directory) Oct 19 22:55:24 yavdr vdr: [1272] max. latency time 3 seconds Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Detected 4 CPUs Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [vdr-fe] Enabling FFmpeg multithreaded video decoding Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ... Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Client 0 connected: 127.0.0.1:46174 Oct 19 22:55:25 yavdr vdr: [1396] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Server greeting: VDR-1.7.16 xineliboutput-1.0.90-cvs READY Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connected (control) to tcp://127.0.0.1:37890 Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Trying PIPE connection ... Oct 19 22:55:25 yavdr vdr: [1396] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1272 Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1272/pipe.0 Oct 19 22:55:25 yavdr vdr: [1396] removing /var/lib/vdr/plugins/xineliboutput/pipes.1272 Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cBackgroundWriterI initialized (buffer 512 kb) Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] cTcpWriter initialized (buffer 512 kb) Oct 19 22:55:25 yavdr vdr: [1396] [xine..put] Pipe open Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] Data stream connected (PIPE) Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1475] [demux_vdr] Using decoder "FFmpeg" for H.264 video Oct 19 22:55:25 yavdr vdr: [1394] EPGSearch: timer conflict check started Oct 19 22:55:25 yavdr vdr: [1394] EPGSearch: timer conflict check finished Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1510] [vdr-fe] read_key: read(stdin) failed: no stdin Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1510] [vdr-fe] Keyboard thread terminated Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1508] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":22 is too small for some HD channels Oct 19 22:55:25 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:26 yavdr kernel: [ 20.848017] eth0: no IPv6 routers present Oct 19 22:55:27 yavdr vdr: [1462] Text2Skin: channelInfo display update thread ended (pid=1272, tid=1462) Oct 19 22:55:27 yavdr vdr: [1272] [xine..put] OSD bandwidth: 324520 bytes/s (2535 kbit/s) Oct 19 22:55:31 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 9, tp 111302 Oct 19 22:55:33 yavdr vdr: [1542] Text2Skin: channelInfo display update thread started (pid=1272, tid=1542) Oct 19 22:55:34 yavdr vdr: [1272] switching to channel 1 Oct 19 22:55:34 yavdr vdr: [1454] TS buffer on device 1 thread ended (pid=1272, tid=1454) Oct 19 22:55:34 yavdr vdr: [1453] buffer stats: 324864 (15%) used Oct 19 22:55:34 yavdr vdr: [1453] receiver on device 1 thread ended (pid=1272, tid=1453) Oct 19 22:55:34 yavdr vdr: [1543] receiver on device 1 thread started (pid=1272, tid=1543) Oct 19 22:55:34 yavdr vdr: [1544] TS buffer on device 1 thread started (pid=1272, tid=1544) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [input_vdr] wait_stream_sync: discard_index 11460480 != curpos 11452960 ! (diff 7520) Oct 19 22:55:35 yavdr vdr-sxfe[1475]: [1509] [demux_vdr] PMT changed, resetting demuxer Oct 19 22:55:39 yavdr vdr: [1542] Text2Skin: channelInfo display update thread ended (pid=1272, tid=1542) Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] No data in 8 seconds, queuing no signal image Oct 19 22:55:43 yavdr vdr-sxfe[1475]: [1509] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg Oct 19 22:55:43 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111836 Oct 19 22:55:51 yavdr dvbmon: Saving number of devices (1) after boot Oct 19 22:55:51 yavdr dvbmon: vdr started by udev allready Oct 19 22:56:48 yavdr vdr: [1389] frontend 0/0 timed out while tuning to channel 1, tp 111836
-
firmware hab ich von der tevii homepage!
-
hier mal ein dmesg auszug
[ 3563.936125] cx23885 0000:02:00.0: PCI INT A disabled
[ 3564.127862] cx23885 driver version 0.0.2 loaded
[ 3564.127960] cx23885 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 3564.128270] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
[ 3564.255787] cx23885_dvb_register() allocating 1 frontend(s)
[ 3564.255796] cx23885[0]: cx23885 based dvb card
[ 3564.257506] DS3000 chip version: 0.192 attached.
[ 3564.257513] DVB: registering new adapter (cx23885[0])
[ 3564.257521] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 3564.286485] TeVii S470 MAC= 00:18:BD:5B:21:03
[ 3564.286498] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 3564.286513] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfac00000
[ 3564.286529] cx23885 0000:02:00.0: setting latency timer to 64
[ 3564.286537] IRQ 19/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 3565.045738] DVB: adapter 0 frontend 0 frequency 914000 out of range (950000..2150000) [ 3585.085551] DVB: adapter 0 frontend 0 frequency 563000 out of range (950000..2150000)
[ 3618.169039] cx23885 0000:02:00.0: PCI INT A disabled
[ 3618.366922] cx23885 driver version 0.0.2 loaded
[ 3618.367156] cx23885 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 3618.367354] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
[ 3618.495092] cx23885_dvb_register() allocating 1 frontend(s)
[ 3618.495103] cx23885[0]: cx23885 based dvb card
[ 3618.496776] DS3000 chip version: 0.192 attached.
[ 3618.496785] DVB: registering new adapter (cx23885[0])
[ 3618.496793] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 3618.529639] TeVii S470 MAC= 00:18:BD:5B:21:03
[ 3618.529652] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 3618.529667] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfac00000
[ 3618.529683] cx23885 0000:02:00.0: setting latency timer to 64
[ 3618.529693] IRQ 19/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9719.772081] lo: Disabled Privacy Extensions -
also ich habe nun eine frische 0.3er installation und direkt die liplian treiber bei der installation gewählt. die 470er scheint aber nicht korrekt zu funktionieren
-
-
bei mir ist das ja so, habe nur eine karte, bild hab ich bei einigen HD sender, OSD natürlich auch ! aber die meisten sender gehen nicht
-
Danke Wolfgang.
Wenn ich nun yavdr mit den liplian Treibern installiert habe. Was muss ich mit den Tevii-Linux-Paket machen ? Nur die Firmware kopieren ?