Posts by impesa

    Ich habe mal diesen Thread wieder aktiviert und hoffe auf eure Hilfe...


    Ich habe die oben erwähnten PPA's bei mir eingetragen:


    add-apt-repository ppa:easyvdr-team/vdr-testing
    add-apt-repository ppa:easyvdr-team/base-testing
    add-apt-repository ppa:easyvdr-team/others-testing
    add-apt-repository ppa:easyvdr-team/base-stable


    ... und anschließend ein update und upgrade auf die Paketverwaltung gemacht!


    Wenn ich nun versuche alles zu installieren:


    apt-get install easyvdr easyvdr-setup


    bekomme ich leider die folgende Fehlermeldung:


    Die folgenden Pakete haben unerfüllte Abhängigkeiten:
    easyvdr : Hängt ab von: vdr-plugin-setup ist aber nicht installierbar


    Ich weiss wohl - es gibt dafür keinen Support - aber vielleicht hat ja doch noch einer eine Idee, wie ich unter 14.04 den easyVDR installieren kann?


    Danke & Gruß,
    Joerg

    Hallo Knebb,


    danke für den Tip mit dem remote-plugin - hat wunderbar funktioniert und ist genau das, was ich gesucht hab'


    Da ich mit PuTTY das OSD benutze musste ich bei der OK Taste deiner remote.conf das 0D in 0A0D ändern und nun funktioniert es prima...


    Noch ne Dumme Frage - kann ich das OSD irgendwie so beenden, das sich mein PuTTY schließt - oder ist das "harte" schließen des PuTTYs der einzige Weg die Fernsteuerung zu beenden?


    Danke & Gruß,
    impeasa

    Quote

    Was spricht gegen das Remote-Plugin? Damit kann man sich das OSD am Steuer-PC ansehen.


    Hört sich gut an - hab ich auch gleich mal installiert - die tcp Verbindung mit telnet kann ich aufmachen - bekomme aber kein OSD wie in der Beschreibung auf der vdr-remote-plugin-Seite abgebildet?


    Muss ich da außer dem -p tcp:xxxx noch was konfigurieren, damit ich das OSD sehen kann? Oder ist zur OSD Anzeige im telnet-Programm noch ein weiteres Plugin nötig?


    Danke & Gruß,
    impesa

    Hi folks,


    ich möchte auf einem bestehenden Debian Etch Server einen TV Server dazupacken. Der Server steht im Keller und hat weder Monitor noch Tastatur, was ich in 99% aller Fälle nicht benötige, da ich ihn remote administriere...


    Nun habe ich vdr 1.4.7-4ctvdr1 und vdradmin-am 3.6.1-2 von e-tobi.net installiert. Die DVB-Karte wird erkannt - auch EPG Daten kann ich mir im vdradmin-am anschauen - soweit so gut...


    Nun frage ich mich aber, wie ich weitermachen soll? Vor einer früheren Installation weiß ich noch, das der VDR über das OSD konfiguriert wird.


    Als Client zum VDR-Server habe ich leider nur eine Windows-Maschine...


    Nun stellen sich mir folgende Fragen, wo ich mir erhoffe, dass ihr mir helfen könnt:


    1) Gibt es ein plugin, wo ich mir remote (im Browser) nur das OSD anzeigen lassen kann und es auch remote bedienen kann?


    2) Die Senderliste bekomme ich im vdradmin-am angezeigt - kann ich die Sender, die mich nicht interessieren irgendwie rauswerfen? Kann ich die verbleibenden Sender sortieren?


    3) Welche Wege der Konfiguration des VDR gibt es noch außer OSD und vdradmin-am?


    Schon mal vielen Dank für Eure Hilfe!


    Gruß,
    Impesa


    PS.: Gibts vielleicht auch ein HowTo, wo der Aufbau eines 'headless' VDR-Servers unter Debian beschrieben ist?

    Hallo,


    ich möchte auf einem AOpen Cube AV EA-65 II ein VDR installieren.


    Da ich gelesen habe, dass für newbies EasyVDR das einfachste wäre, habe ich mir das installiert.


    Nach der Installation habe ich aber nur einen schwarzen Bildschirm und einige Fehlermeldungen in den Logdateien.


    Soweit ich weiss muss ich irgendwie einen Softwaretreiber (xine, ...) zum laufen bringen, damit die Ausgabe der Terratec Cinergy 1200-S auf der Grafikkarte (Intel 865G) erscheint.


    Leider habe ich keine Ahnung, wo ich mit dem Konfigurieren beginnen soll.


    Für jeden Tipp dankbar!


    Danke & Gruß,
    Joerg


    PS.: Anbei die Logausgaben...


    DEBUG:



    dmsg:
    save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 496220k/507840k available (4453k kernel code, 11132k reserved, 1493k data, 344k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 5587.92 BogoMIPS (lpj=2793960)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
    Checking 'hlt' instruction... OK.
    Checking for popad bug... OK.
    ACPI: Core revision 20060707
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    NET: Registered protocol family 16
    EISA bus registered
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfbca0, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 4080-40bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 14 devices
    PnPBIOS: Disabled by ACPI PNP
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:0b: ioport range 0x4000-0x40bf could not be reserved
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: f8000000-f80fffff
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 16384 bind 8192)
    TCP reno registered
    IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
    Total HugeTLB memory allocated, 0
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.27 [Flags: R/W].
    fuse init (API version 7.7)
    cdfs 2.6.17 loaded.
    JFS: nTxBlock = 3877, nTxLock = 31020
    SGI XFS with ACLs, security attributes, realtime, no debug enabled
    SGI XFS Quota Management subsystem
    OCFS2 1.3.3
    OCFS2 Node Manager 1.3.3
    OCFS2 DLM 1.3.3
    OCFS2 DLMFS 1.3.3
    OCFS2 User DLM kernel interface loaded
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Getting cpuindex for acpiid 0x1
    ACPI: Thermal Zone [THRM] (0 C)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH5: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0...
    hda: IC35L060AVVA07-0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4
    hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
    megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
    3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
    libata version 2.00 loaded.
    ata_piix 0000:00:1f.2: version 2.00
    ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0xE500 ctl 0xE602 bmdma 0xE900 irq 169
    ata2: SATA max UDMA/133 cmd 0xE700 ctl 0xE802 bmdma 0xE908 irq 169
    scsi0 : ata_piix
    ATA: abnormal status 0x7F on port 0xE507
    scsi1 : ata_piix
    ATA: abnormal status 0x7F on port 0xE707
    RocketRAID 3xxx SATA Controller driver v1.0 (060426)
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.4 loaded
    device-mapper: multipath round-robin: version 1.0.0 loaded
    device-mapper: multipath emc: version 0.0.3 loaded
    EISA: Probing bus 0 at eisa.0
    Cannot allocate resource for EISA slot 4
    Cannot allocate resource for EISA slot 5
    EISA: Detected 0 cards.
    TCP bic registered
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    ACPI: (supports S0 S1 S4 S5)
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    input: AT Translated Set 2 keyboard as /class/input/input0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 344k freed
    NET: Registered protocol family 1
    Adding 266072k swap on /dev/hda1. Priority:-1 extents:1 across:266072k
    EXT3 FS on hda3, internal journal
    v4l1_compat: no version for "struct_module" found: kernel tainted.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    tg3.c:v3.65 (August 07, 2006)
    ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 22 (level, low) -> IRQ 177
    eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:01:80:58:a1:1e
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
    eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
    PM: Writing back config space on device 0000:01:07.0 at offset b (was 3ed173b, writing 3ada0a0)
    PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008)
    PM: Writing back config space on device 0000:01:07.0 at offset 2 (was 2000000, writing 2000003)
    PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2b00000, writing 2b00006)
    PM: Writing back config space on device 0000:01:07.0 at offset 0 (was 3ed173b, writing 169c14e4)
    NET: Registered protocol family 17
    Linux agpgart interface v0.101 (c) Dave Jones
    logips2pp: Detected unknown logitech mouse model 1
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e100
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e200
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    input: PS/2 Logitech Mouse as /class/input/input1
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is on for TX and on for RX.
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e300
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000e400
    ts: Compaq touchscreen protocol output
    usb usb4: configuration #1 chosen from 1 choice
    usb 2-1: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    agpgart: Detected an Intel 865 Chipset.
    agpgart: Detected 16252K stolen memory.
    agpgart: AGP aperture is 128M @ 0xf0000000
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 201, io mem 0xf8180000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 8 ports detected
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usb 5-3: new high speed USB device using ehci_hcd and address 2
    usb 5-3: configuration #1 chosen from 1 choice
    usb 2-1: USB disconnect, address 2
    scsi3 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    lirc_dev: IR Remote Control driver registered, at major 61
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    usbcore: registered new driver ub
    Vendor: BQF Model: USB Storage-SMC Rev: 008A
    Type: Direct-Access ANSI SCSI revision: 00
    sd 3:0:0:0: Attached scsi removable disk sda
    sd 3:0:0:0: Attached scsi generic sg0 type 0
    Vendor: BQF Model: USB Storage-CFC Rev: 008A
    Type: Direct-Access ANSI SCSI revision: 00
    sd 3:0:0:1: Attached scsi removable disk sdb
    sd 3:0:0:1: Attached scsi generic sg1 type 0
    Vendor: BQF Model: USB Storage-MMC Rev: 008A
    Type: Direct-Access ANSI SCSI revision: 00
    sd 3:0:0:2: Attached scsi removable disk sdc
    sd 3:0:0:2: Attached scsi generic sg2 type 0
    Vendor: BQF Model: USB Storage-MSC Rev: 008A
    Type: Direct-Access ANSI SCSI revision: 00
    sd 3:0:0:3: Attached scsi removable disk sdd
    sd 3:0:0:3: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    intel_rng: FWH not detected
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 50274 usecs
    intel8x0: clocking to 48000
    saa7146: register extension 'budget_av'.
    ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 18 (level, low) -> IRQ 169
    saa7146: found saa7146 @ mem dfc14000 (revision 1, irq 169) (0x153b,0x1154).
    saa7146 (0): dma buffer size 192512
    DVB: registering new adapter (TerraTec Cinergy 1200 DVB-S).
    adapter failed MAC signature check
    encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
    KNC1-0: MAC addr = 00:0a:ac:01:27:a4
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    budget-av: ci interface initialised.
    ieee1394: Initialized config rom entry `ip1394'
    ACPI: PCI Interrupt 0000:01:0d.0[A] -> GSI 21 (level, low) -> IRQ 217
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217] MMIO=[f8011000-f80117ff] Max Packet=[2048] IR/IT contexts=[8/8]
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[000180139458a11e]
    eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'dvb'.
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: overridden by ACPI.
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new driver kbtab
    drivers/usb/input/kbtab.c: v0.0.2:USB KB Gear JamStudio Tablet driver
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    saa7146: register extension 'dvb'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully

    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    eth0: no IPv6 routers present
    -----------------
    lspci:
    0000:00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
    0000:00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
    0000:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
    0000:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
    0000:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
    0000:00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
    0000:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
    0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
    0000:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
    0000:00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
    0000:00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
    0000:00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
    0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    0000:01:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    0000:01:07.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
    0000:01:0d.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
    -----------------
    lsmod:
    Module Size Used by
    lirc_serial 13536 1
    b2c2_flexcop_pci 8344 0
    b2c2_flexcop 27660 1 b2c2_flexcop_pci
    mt312 6788 0
    cx24110 7172 0
    tda1004x 13956 0
    ves1820 5892 0
    ves1x93 6148 0
    dvb_ttpci 90692 0
    evdev 9856 0
    ipv6 242784 12
    kbtab 5632 0
    usbhid 50848 0
    eth1394 18820 0
    parport_pc 38084 0
    parport 34888 1 parport_pc
    ohci1394 33200 0
    ieee1394 93880 2 eth1394,ohci1394
    budget_av 18560 12
    budget_core 9988 1 budget_av
    snd_intel8x0 31900 0
    i2c_i801 7564 0
    ub 19488 0
    lirc_dev 14676 1 lirc_serial
    eeprom 7184 0
    i2c_viapro 8724 0
    usb_storage 79168 0
    ehci_hcd 31112 0
    ohci_hcd 20484 0
    intel_agp 21788 1
    tsdev 7744 0
    uhci_hcd 23052 0
    w83627hf 23184 0
    hwmon_vid 3456 1 w83627hf
    i2c_isa 5248 1 w83627hf
    snd_via82xx 27160 0
    gameport 15240 1 snd_via82xx
    snd_ac97_codec 85792 2 snd_intel8x0,snd_via82xx
    snd_ac97_bus 2432 1 snd_ac97_codec
    snd_pcm 75656 3 snd_intel8x0,snd_via82xx,snd_ac97_codec
    snd_timer 23684 1 snd_pcm
    snd_page_alloc 9992 3 snd_intel8x0,snd_via82xx,snd_pcm
    snd_mpu401_uart 8320 1 snd_via82xx
    snd_rawmidi 24352 1 snd_mpu401_uart
    snd_seq_device 8076 1 snd_rawmidi
    snd 50148 8 snd_intel8x0,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
    soundcore 9952 1 snd
    psmouse 36744 0
    i810fb 32316 0
    agpgart 32944 2 intel_agp,i810fb
    vgastate 9216 1 i810fb
    af_packet 21384 0
    tg3 102788 0
    dvb_pll 13700 2 b2c2_flexcop,budget_av
    stv0299 9480 1
    dvb_core 72360 5 b2c2_flexcop,dvb_ttpci,budget_av,budget_core,stv0299
    saa7146_vv 43776 2 dvb_ttpci,budget_av
    video_buf 21636 1 saa7146_vv
    saa7146 15496 4 dvb_ttpci,budget_av,budget_core,saa7146_vv
    ttpci_eeprom 2304 2 dvb_ttpci,budget_core
    i2c_core 21136 17 b2c2_flexcop,mt312,cx24110,tda1004x,ves1820,ves1x93,dvb_ttpci,budget_av,budget_core,i2c_i801,eeprom,i2c_viapro,w83627hf,i2c_isa,dvb_pll,stv0299,ttpci_eeprom
    videodev 24704 1 saa7146_vv
    v4l2_common 21632 2 saa7146_vv,videodev
    v4l1_compat 12676 2 saa7146_vv,videodev
    unix 26800 20
    -----------------
    logread:
    Mar 24 17:28:44 (none) syslog.info syslogd started: BusyBox v1.1.3
    Mar 24 17:28:46 (none) local0.info udhcpc[1560]: udhcpc (v0.9.9-pre) started
    Mar 24 17:28:47 (none) local0.debug udhcpc[1560]: Sending discover...
    Mar 24 17:28:49 (none) local0.debug udhcpc[1560]: Sending discover...
    Mar 24 17:28:49 (none) local0.debug udhcpc[1560]: Sending select for 192.168.192.215...
    Mar 24 17:28:49 (none) local0.info udhcpc[1560]: Lease of 192.168.192.215 obtained, lease time 1800
    Mar 24 17:28:49 (none) user.notice input.agent[1949]: tsdev: loaded successfully
    Mar 24 17:28:52 (none) daemon.err mysqld_safe[2685]: started
    Mar 24 17:28:52 (none) user.notice pci.agent[1614]: intel-agp: loaded successfully
    Mar 24 17:28:52 (none) user.notice pci.rc[1593]: ignoring pci display device 00:02.0
    Mar 24 17:28:53 (none) user.notice usb.agent[2482]: ub: loaded successfully
    Mar 24 17:28:53 (none) user.notice usb.agent[2482]: usb-storage: already loaded
    Mar 24 17:28:55 (none) user.notice usb.agent[2748]: ub: already loaded
    Mar 24 17:28:55 (none) user.notice usb.agent[2748]: usb-storage: already loaded
    Mar 24 17:28:56 (none) user.notice pci.agent[2722]: uhci-hcd: already loaded
    Mar 24 17:28:56 (none) daemon.err mysqld[2688]: /usr/sbin/mysqld: ready for connections.
    Mar 24 17:28:56 (none) daemon.err mysqld[2688]: Version: '4.1.11-Debian_4sarge7' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Source distribution
    Mar 24 17:28:56 (none) user.notice pci.agent[2957]: uhci-hcd: already loaded
    Mar 24 17:28:57 (none) user.notice pci.agent[3006]: uhci-hcd: already loaded
    Mar 24 17:28:57 (none) user.notice scsi.agent[3089]: sd_mod: can't be loaded (for disk)
    Mar 24 17:28:57 (none) user.notice scsi.agent[3082]: sd_mod: can't be loaded (for disk)
    Mar 24 17:28:57 (none) authpriv.info su[3210]: + ??? root:root
    Mar 24 17:28:57 (none) auth.info su[3210]: (pam_unix) session opened for user root by (uid=0)
    Mar 24 17:28:57 (none) daemon.info /etc/mysql/debian-start[3224]: Checking for crashed MySQL tables.
    Mar 24 17:28:57 (none) user.notice pci.agent[3061]: uhci-hcd: already loaded
    Mar 24 17:28:58 (none) user.notice scsi.agent[3161]: sd_mod: can't be loaded (for disk)
    Mar 24 17:28:58 (none) user.notice scsi.agent[3123]: sd_mod: can't be loaded (for disk)
    Mar 24 17:28:58 (none) user.notice pci.agent[3307]: ehci-hcd: already loaded
    Mar 24 17:28:59 (none) daemon.notice modprobe: FATAL: Error inserting intel_rng (/lib/modules/2.6.18.3/kernel/drivers/char/hw_random/intel-rng.ko): No such device
    Mar 24 17:29:00 (none) user.err vdr: [3210] dvdswitch: no translation found for 'Open' in language 1 (Deutsch)
    Mar 24 17:29:00 (none) user.err vdr: [3210] weatherng: Parameter '-D' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:00 (none) user.err vdr: [3210] weatherng: Parameter '-I' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:00 (none) user.err vdr: [3210] weatherng: Parameter '-S' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:00 (none) user.err vdr: [3210] ERROR: invalid primary device number: 1
    Mar 24 17:29:00 (none) user.err vdr: [3210] ERROR: no primary device found - using first device!
    Mar 24 17:29:00 (none) user.err vdr: [3210] ERROR: invalid primary device number: 1

    Mar 24 17:29:00 (none) authpriv.info su[3608]: + ??? root:root
    Mar 24 17:29:00 (none) auth.info su[3608]: (pam_unix) session opened for user root by (uid=0)
    Mar 24 17:29:01 (none) user.notice pci.agent[3628]: i2c-i801: loaded successfully
    Mar 24 17:29:03 (none) user.notice pci.agent[3693]: snd-intel8x0: loaded successfully
    Mar 24 17:29:04 (none) user.notice pci.agent[3806]: budget-av: loaded successfully
    Mar 24 17:29:04 (none) user.notice pci.agent[3912]: tg3: already loaded
    Mar 24 17:29:05 (none) user.notice pci.agent[3954]: ohci1394: loaded successfully
    Mar 24 17:29:06 (none) user.notice isapnp.rc[4084]: parport_pc: loaded sucessfully
    Mar 24 17:29:06 (none) user.notice input.agent[4181]: tsdev: already loaded
    Mar 24 17:29:06 (none) user.notice scsi.agent[4207]: sd_mod: can't be loaded (for disk)
    Mar 24 17:29:06 (none) user.notice scsi.agent[4217]: sd_mod: can't be loaded (for disk)
    Mar 24 17:29:06 (none) user.notice scsi.agent[4227]: sd_mod: can't be loaded (for disk)
    Mar 24 17:29:06 (none) user.notice scsi.agent[4237]: sd_mod: can't be loaded (for disk)
    Mar 24 17:29:07 (none) user.notice ieee1394.agent[4259]: eth1394: loaded successfully
    Mar 24 17:29:09 (none) daemon.info init: Entering runlevel: 2
    Mar 24 17:29:09 (none) auth.info sshd[4547]: Server listening on :: port 22.
    Mar 24 17:29:15 (none) authpriv.info su[5058]: + ??? root:root
    Mar 24 17:29:15 (none) auth.info su[5058]: (pam_unix) session opened for user root by (uid=0)
    Mar 24 17:29:15 (none) user.err vdr: [5058] ERROR: unknown config parameter: burn.UseIso2UTF = 1
    Mar 24 17:29:18 (none) user.err vdr: [5058] dvdswitch: no translation found for 'Open' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] weatherng: Parameter '-D' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:18 (none) user.err vdr: [5058] weatherng: Parameter '-I' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:18 (none) user.err vdr: [5058] weatherng: Parameter '-S' not set. Set default value : /etc/vdr/plugins/weatherng
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Mark' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Unmark' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Mark all' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Unm. all' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'View' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Play' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Threads' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Sources' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] filebrowser: no translation found for 'Other' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] text2skin_DeepBlue: no translation found for 'Mute' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Open' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Summary' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Red' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Green' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Yellow' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Blue' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Red' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Green' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Yellow' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] undelete: no translation found for 'Blue' in language 1 (Deutsch)
    Mar 24 17:29:18 (none) user.err vdr: [5058] ERROR: no OSD provider available - using dummy OSD!
    Mar 24 17:29:38 (none) user.err vdr: [5058] ERROR: no OSD provider available - using dummy OSD!

    Mar 24 17:29:51 (none) auth.info sshd[5457]: Accepted keyboard-interactive/pam for root from ::ffff:192.168.192.50 port 1501 ssh2
    Mar 24 17:29:51 (none) auth.info sshd[5509]: (pam_unix) session opened for user root by root(uid=0)
    -----------------