Posts by funker

    schneiden über ProjectX klappt jetzt auch wunderbar, jetzt habe ich eigentlich alles, was ich brauche.


    Wenn ich im vdradmin auf Aufnahme ansehen klicke, dann stürtzt vdradmin ab, d.h ich muss ihn rebooten, damit ich wieder aufs webinterface komme. Woran könnte das liegen?


    Was mir noch aufgefallen ist, der VDR schaltet sich nach ner Weile aus. Fährt dann aber, wenn ne Aufnahme ansteht wieder hoch.


    Kann man das irgendwo deaktivieren, sodass er erst runterfährt, wenn ich ihn runterfahre mit halt via ssh ?

    ok sorry, ich hätte mein System beschreiben sollen..


    Ich habe die Mahlzeit 3.2 am laufen mit einer Skystar2 auf einem EPIA VE5000 ohne irgendwelche Plugins.


    Ich möchte den VDR nur zum aufzeichnen von Sendungen, die ich dann via Netzwerk auf meinen PC kopieren und dann ansehn bzw. auf DVD brennen kann.
    Daher wäre mir eine mpeg datei am liebsten.

    Hi!


    ich habe die Mahlzeit3.2 am laufen. Heute habe ich meine Skystar2 Karte bekommen und gleich eingebaut. Nur leider wird sie nicht erkannt.
    modprobe b2c2-flexcop-pci liefert keine Antwort.


    VDRadmin Startseite liefert mir: Can't connect to VDR at localhost:2001


    Was mache ich falsch?


    Hätte ich die Karte vielleicht vor der Installation einbauen sollen?


    dmesg liefert:
    ion of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.
    Linux video capture interface: v2.00
    saa7146: register extension 'dvb'.
    saa7146: register extension 'budget dvb'.
    saa7146: register extension 'budget_ci dvb'.
    saa7146: register extension 'budget_av'.
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    flexcop-pci: will use the HW PID filter.
    flexcop-pci: card revision 2
    PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    DVB: registering new adapter (FlexCop Digital TV device).
    b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
    b2c2-flexcop: found the stv0299 at i2c address: 0x68
    DVB: registering frontend 0 (ST STV0299 DVB-S)...
    b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    lirc_serial: auto-detected active high receiver
    lirc_dev: lirc_register_plugin: sample_rate: 0
    ACPI: PCI interrupt for device 0000:00:14.0 disabled
    b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
    saa7146: unregister extension 'budget_av'.
    saa7146: unregister extension 'budget_ci dvb'.
    saa7146: unregister extension 'budget dvb'.
    saa7146: unregister extension 'dvb'.