@rüsseltier you can use softhddevice on desktop in window mode, and attach/detach output when vdr running allways, but on one host. And Xorg only, not Wayland yet.
Beiträge von lnj
-
-
Have you tried different sync settings?
-
For fast switching use fast sync start with decoder clear, black screen not necessary.
-
Normal, then it’s not at all clear why there is such a load.
I will test with va-api some more.
-
What generation of i3 you use?
-
Schwabe I'll test this.
-
Taipan this is not the case, you need to look not at errors, but at how the decoder is initialized, very similar to software decoding.
Press menu and softhddevice, bottom of the screen Decoder .... OSD....... If you see Decoder: Software, you use soft decoder.
-
Compile the debug version and post the log. Uncomment in Makefile DEBUG.
-
This is a normal.
Trying to use shaders version 4.60. It get an error because it is not supported. Then trying version 3.30, and it compiled ok.
-
Confirmed, I will fix this.
-
I'll try to reproduce this.
-
Version 2.0.4.
Fast sync start gives fast sound, but may result in poor sync.
If there is poor synchronization during a fast start, I will do it differently.
-
The first part is done, the second will be tomorrow.
-
I'll test it for a couple of days and try to figure it out.
-
Yes, so far so.
-
When I have time, I'll try to improve it, and maybe jrie will help.
-
This is most likely the case, especially if vdpau is used. It may get better over time.
-
Fixed, version 2.0.3.
-
I found what the problem is, but this gives rise to another problem, I'm looking for a solution.
-