Ach ich gebs auf. Außer senkrechten Streifen und wirres Zeug kommt nix.
[Blockierte Grafik: http://chatscene.de/lcd.jpg]
Das wäre die Uhr von PowerLCD
Ach ich gebs auf. Außer senkrechten Streifen und wirres Zeug kommt nix.
[Blockierte Grafik: http://chatscene.de/lcd.jpg]
Das wäre die Uhr von PowerLCD
Kontrast geht nun auch. Nur die Anzeige nicht wirklich.
Hab jetzt alles mindestens 3 mal verkabelt, krieg aber jedesmal nur Datenmüll auf dem Display angeziegt. Meistens nur ein paar Streifen. Irgendwo ist noch der Wurm drin. Hab aber keine Ahnung, wo ich noch suchen könnte. Hab zich mal die Kabelbelegung kontrolliert, nix. EPP, ECP, SPP getestet, Müll.
P.S. Getestet mit PowerLCD und LCD Studio.
Any ideas?
Hach ist das lustig hier *chips und bier hol*
Nee, hab ne Nexus S und ne Nova S, mit der Karte hat das nix zu tun denke ich.
Ich denke, es hat was mit den Treiber zu tun, irgendwo im Forum hier hab ich das gelesen, aber auch keine Lösung gefunden. Könntest natürlich mal ältere Treiber versuchen, falls Du noch hast.
Also bei mir geht GRAB auch nicht. Hab aber keinen Schimmer wieso. Im Log kann ich keine Fehler finden. Hab irgendwo gelesen, daß es an den neuen DVB Treibern liegen könnte, aber keine Ahnung, ob da was dran ist.
Das einzige was ich gemacht hatte, hab auf VDR 1.4.0 geupdated und neue DVD Treiber installiert. Kann also nur da das Problem liegen.
Also bei mir klappt das alles noch nicht so richtig, habs gestern mal versucht umzubauen, aber ausser die Hintergrundbeleuchtung funktioniert noch nichts Selbst der Kontrast nicht...naja, morgen hab ich ja Zeit, den ganzen Kram nochmal zu löten. Irgendwo nen Denkfehler, hm.
Ich glaub mit "nohup" ging das irgendwie?!
Gruss
TheChief
Hm, bei mir funktionierts auch nicht. Komischerweise kein Fehler im Log oder irgendwas:
linvdr:/# svdrpsend.pl grab - 90 480 360
220 linvdr SVDRP VideoDiskRecorder 1.4.0; Tue May 23 12:26:15 2006
451 Grab image failed
221 linvdr closing connection
Irgend ne Lösung?
Hab nen realtiv aktuellen DVB Treiber
Gruss
TheChief
Mal checken, das Modul für den Chip wurde nicht mit kompiliert. Hab das Modul jetzt kompiliert, mal sehen, ob es dann geht.
EDIT:
Und siehe da, es scheitn zu gehen:
linvdr:~# sensors
w83627ehf-isa-0290
Adapter: ISA adapter
Case Fan: 1748 RPM (min = 1461 RPM, div = 4)
CPU Fan: 2700 RPM (min = 1333 RPM, div = 4)
fan3: 0 RPM (min = 44 RPM, div = 128)
fan4: 0 RPM (min = 10546 RPM, div = 64)
Sys Temp: +41 C (high = +123 C, hyst = -113 C)
CPU Temp: +37.5 C (high = +80.0 C, hyst = +75.0 C)
temp3: +48.0 C (high = +80.0 C, hyst = +75.0 C)
Danke für die Hilfe.
Nächtes Thema: mbon tuts noch nicht.
No Hardware Monitor found!!
InitMBInfo: Success
linvdr:~# mbmon -A
InitMBInfo: Success
This program needs "setuid root"!!
Bin als root eingeloggt, allerding per ssh. Geht das nicht?
Bei mir hingegen steht folgendes dauernd im Log:
May 22 14:42:47 linvdr user.debug vdr: [1436] changing pids of channel 648 from 901+901:902:204 to 701+701:702:204
May 22 14:42:56 linvdr user.info vdr: [1426] LNB 2: Request for channel 324 on device 1. MaxBadPriority is -2
May 22 14:42:56 linvdr user.info vdr: [1426] LNB 2: Request for channel 324 on device 1. MaxBadPriority is -2
May 22 14:42:56 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 324 on device 1. OK
May 22 14:42:56 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 324
May 22 14:42:57 linvdr user.debug kernel: cx88[0]/2: cx8802_timeout
May 22 14:43:05 linvdr user.info vdr: [1438] frontend 1 timed out while tuning to channel 324, tp 211534
May 22 14:43:09 linvdr user.info vdr: [1426] connect from 127.0.0.1, port 59456 - accepted
May 22 14:43:09 linvdr user.info vdr: [1426] closing SVDRP connection
May 22 14:43:17 linvdr user.info vdr: [1426] LNB 2: Request for channel 303 on device 1. MaxBadPriority is -2
May 22 14:43:17 linvdr user.info vdr: [1426] LNB 2: Request for channel 303 on device 1. MaxBadPriority is -2
May 22 14:43:17 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 303 on device 1. OK
May 22 14:43:17 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 303
May 22 14:43:38 linvdr user.info vdr: [1426] LNB 2: Request for channel 336 on device 1. MaxBadPriority is -2
May 22 14:43:38 linvdr user.info vdr: [1426] LNB 2: Request for channel 336 on device 1. MaxBadPriority is -2
May 22 14:43:38 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 336 on device 1. OK
May 22 14:43:38 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 336
May 22 14:43:50 linvdr user.debug vdr: [1436] changing pids of channel 648 from 701+701:702:204 to 901+901:902:204
May 22 14:43:59 linvdr user.info vdr: [1426] LNB 2: Request for channel 158 on device 1. MaxBadPriority is -2
May 22 14:43:59 linvdr user.info vdr: [1426] LNB 2: Request for channel 158 on device 1. MaxBadPriority is -2
May 22 14:43:59 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 158 on device 1. OK
May 22 14:43:59 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 158
May 22 14:44:09 linvdr user.info vdr: [1426] connect from 127.0.0.1, port 59457 - accepted
May 22 14:44:09 linvdr user.info vdr: [1426] closing SVDRP connection
May 22 14:44:20 linvdr user.info vdr: [1426] LNB 2: Request for channel 359 on device 1. MaxBadPriority is -2
May 22 14:44:20 linvdr user.info vdr: [1426] LNB 2: Request for channel 359 on device 1. MaxBadPriority is -2
May 22 14:44:20 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 359 on device 1. OK
May 22 14:44:20 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 359
May 22 14:44:41 linvdr user.info vdr: [1426] LNB 2: Request for channel 379 on device 1. MaxBadPriority is -2
May 22 14:44:41 linvdr user.info vdr: [1426] LNB 2: Request for channel 379 on device 1. MaxBadPriority is -2
May 22 14:44:41 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 379 on device 1. OK
May 22 14:44:41 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 379
May 22 14:44:48 linvdr user.debug vdr: [1436] changing pids of channel 648 from 901+901:902:204 to 701+701:702:204
May 22 14:45:02 linvdr user.info vdr: [1426] LNB 2: Request for channel 387 on device 1. MaxBadPriority is -2
May 22 14:45:02 linvdr user.info vdr: [1426] LNB 2: Request for channel 387 on device 1. MaxBadPriority is -2
May 22 14:45:02 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 387 on device 1. OK
May 22 14:45:02 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 387
May 22 14:45:23 linvdr user.info vdr: [1426] LNB 2: Request for channel 392 on device 1. MaxBadPriority is -2
May 22 14:45:23 linvdr user.info vdr: [1426] LNB 2: Request for channel 392 on device 1. MaxBadPriority is -2
May 22 14:45:23 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 392 on device 1. OK
May 22 14:45:23 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 392
May 22 14:45:44 linvdr user.info vdr: [1426] LNB 2: Request for channel 171 on device 1. MaxBadPriority is -2
May 22 14:45:44 linvdr user.info vdr: [1426] LNB 2: Request for channel 171 on device 1. MaxBadPriority is -2
May 22 14:45:44 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 171 on device 1. OK
May 22 14:45:44 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 171
May 22 14:45:47 linvdr user.debug vdr: [1436] changing pids of channel 648 from 701+701:702:204 to 901+901:902:204
May 22 14:46:05 linvdr user.info vdr: [1426] LNB 2: Request for channel 423 on device 1. MaxBadPriority is -2
May 22 14:46:05 linvdr user.info vdr: [1426] LNB 2: Request for channel 423 on device 1. MaxBadPriority is -2
May 22 14:46:05 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 423 on device 1. OK
May 22 14:46:05 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 423
May 22 14:46:26 linvdr user.info vdr: [1426] LNB 2: Request for channel 429 on device 1. MaxBadPriority is -2
May 22 14:46:26 linvdr user.info vdr: [1426] LNB 2: Request for channel 429 on device 1. MaxBadPriority is -2
May 22 14:46:26 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 429 on device 1. OK
May 22 14:46:26 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 429
May 22 14:46:47 linvdr user.info vdr: [1426] LNB 2: Request for channel 441 on device 1. MaxBadPriority is -2
May 22 14:46:47 linvdr user.info vdr: [1426] LNB 2: Request for channel 441 on device 1. MaxBadPriority is -2
May 22 14:46:47 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 441 on device 1. OK
May 22 14:46:47 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 441
May 22 14:46:51 linvdr user.debug vdr: [1436] changing pids of channel 648 from 901+901:902:204 to 701+701:702:204
May 22 14:47:08 linvdr user.info vdr: [1426] LNB 2: Request for channel 462 on device 1. MaxBadPriority is -2
May 22 14:47:08 linvdr user.info vdr: [1426] LNB 2: Request for channel 462 on device 1. MaxBadPriority is -2
May 22 14:47:08 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 462 on device 1. OK
May 22 14:47:08 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 462
May 22 14:47:29 linvdr user.info vdr: [1426] LNB 2: Request for channel 471 on device 1. MaxBadPriority is -2
May 22 14:47:29 linvdr user.info vdr: [1426] LNB 2: Request for channel 471 on device 1. MaxBadPriority is -2
May 22 14:47:29 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 471 on device 1. OK
May 22 14:47:29 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 471
May 22 14:47:50 linvdr user.info vdr: [1426] LNB 2: Request for channel 480 on device 1. MaxBadPriority is -2
May 22 14:47:50 linvdr user.info vdr: [1426] LNB 2: Request for channel 480 on device 1. MaxBadPriority is -2
May 22 14:47:50 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 480 on device 1. OK
May 22 14:47:50 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 480
May 22 14:47:50 linvdr user.debug vdr: [1436] changing pids of channel 648 from 701+701:702:204 to 901+901:902:204
May 22 14:48:11 linvdr user.info vdr: [1426] LNB 2: Request for channel 496 on device 1. MaxBadPriority is -2
May 22 14:48:11 linvdr user.info vdr: [1426] LNB 2: Request for channel 496 on device 1. MaxBadPriority is -2
May 22 14:48:11 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 496 on device 1. OK
May 22 14:48:11 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 496
May 22 14:48:11 linvdr user.info vdr: [1426] connect from 127.0.0.1, port 49767 - accepted
May 22 14:48:11 linvdr user.info vdr: [1426] closing SVDRP connection
May 22 14:48:32 linvdr user.info vdr: [1426] LNB 2: Request for channel 506 on device 1. MaxBadPriority is -2
May 22 14:48:32 linvdr user.info vdr: [1426] LNB 2: Request for channel 506 on device 1. MaxBadPriority is -2
May 22 14:48:32 linvdr user.info vdr: [1426] LNB 2: Device check for for channel 506 on device 1. OK
May 22 14:48:32 linvdr user.info vdr: [1426] LNB 2: Switching device 1 to channel 506
Alles anzeigen
Woher kommt das denn?
linvdr:/usr/src/lm_sensors-2.10.0# grep ^CONFIG_SENSORS /boot/config
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
Alles anzeigen
Welchen davon müsste ich laden?
sensors-detect hat nen W83627EHF gefunden, fast wie der letzte Eintrag, aber eben nur fast.
linvdr:/usr/src/lm_sensors-2.10.0# grep I2C /boot/config | grep -v ^#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_PCA_ISA=m
Alles anzeigen
lsmod
linvdr:/usr/src/lm_sensors-2.10.0# lsmod|grep i2c
i2c_isa 4864 0
i2c_dev 9344 0
cx88_vp3054_i2c 3968 1 cx88_dvb
i2c_algo_bit 9480 2 cx88xx,cx88_vp3054_i2c
i2c_core 20352 34 eeprom,i2c_isa,i2c_dev,cx88_dvb,cx88xx,tveeprom,i2c_algo_bit,mt352,or51132,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,budget_av,dvb_pll,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,lnbp21,l64781,tda8083,sp8870,stv0297,ttpci_eeprom,mt312,tda1004x,ves1820,stv0299,ves1x93
EDIT:
Es gibt /sys/devices/platform/i2c-9191/* Da sind nen paar Dateien darin, wie zB name und event
Sensors-detect läuft jetzt, aber sensors immernoch nicht, siehe oben.
sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
Ist es
Danke, habs gefunden. Konntest es zwar nun komilieren und installieren, aber sensors-detect sagt nun:
No i2c device files found. Use prog/mkdev/mkdev.sh to create them.
sensors meint dazu:
sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
Hmm. Muss ich da noch irgendwas laden, nen Modul?
Hallo
versuche grad mal lm_sensors mit "make user" (Kernel 2.6.15) zu kompilieren und erhalte:
make: *** No rule to make target `sysfs/libsysfs.h', needed by `lib/sysfs.ad'.
Kann auch keine libsysfs.h auf meinem System finden.
Jemand ne Idee?
Gruss
TheChief
Was willst Du denn machen? Flugzeuge? Hubschrauber? Autos?
Also ich fahre einen 1:5 FG Monstertruck mit Benzin. Falls Du an sowas Interesse hast, ich bin öfter auf http://www.fgdriver.de unterwegs. Auf der Seite gehts aber nur um 1:5 Auto-Modelle von FG
Gruss
TheChief
Ja dann, Platte raus und nochmal rein
...ahh hat sich grad überschnitten
Da muss nur was stehen, wenn Du automatisch beim Start mounten willst, aber erstmal muss ja die Platte erkannt werden vom System. Das scheints ja irgendwie nicht zu tun?! Oder hab ich was übersehen?