Beiträge von Groucho Marx

    Hey dony!


    Vielleicht kommen wir ja so weiter!
    Wobei ich sagen muß, daß mein VDR nicht "einfriert", wie von Dir beschrieben, sondern eben ganz abstürzt, also "aus geht"!


    Es wäre nett, wenn Du mich auf dem Laufenden halten würdest, da ich im Moment ein wenig hilflos bin.....


    Tschökes,
    Groucho

    Guten Morgen!
    Ich konnte leider noch nichts Neues herausfinden. Ich hatte zwar am Freitag Abend beim Aufnehmen von "Postman" einen erneuten Absturz, diesmal sogar schon während des Films, konnte aber zur Ursache nichts feststellen.
    Wie ich schon sagte, habe ich selber nahezu keine Ahnung und bin auf einen guten Freund angewiesen, der aber zur Zeit in Urlaub ist.


    Unsere letzte Vermutung bezog sich auch auf die Hardware, hier speziell auf die Festplatte, da diese bei einem Maxtor-Fehlertester einmal einen Fehler meldete und sich einmal sogar - wie beim VDR - der Rechner ganz abschaltete.


    Ich werde mich melden, sobald ich was Neues weiß, werde aber jedenfalls schon mal Coopers Vorschlag folgen und die Plugins abschalten und es dann noch mal versuchen.


    Falls sonst jemand eine Idee hat, wäre es sehr nett, wenn Ihr Euch meldet.


    Tschökes,
    Groucho

    Hey,


    leider kann ich auch nicht zur Lösung Deines Problems beitragen, habe aber - glaube ich - mit LinVDR 0.7 das GLEICHE Problem.
    Ich habe es hier http://www.vdr-portal.de/board/thread.php?threadid=35179&sid=
    schon thematisiert und ausführlich beschrieben.


    Vielleicht helfen Dir ja die Antworten, die ich bekommen habe und vielleicht kannst Du mir mal Bescheid geben, ob sich die Probleme decken und - was natürlich am besten wäre - wie Du Deines gelöst hast.


    Tschökes,
    Groucho

    Guten Morgen!


    Erst mal wieder Danke, Schluzkrapfn!
    Aber ich bin mir nicht sicher, ob wirklich diese noad-error-logs der Knackpunkt sind. Handelt es sich nicht dabei um das Problem, das immer auftritt, wenn sich "noad before" und "noad after" überschneiden und daß durch ein automatisches Abschalten von "noad before" nach einer gewissen Zeitspanne gelöst wird?!


    Wenn es die Lösung wäre, noad WÄHREND der Aufnahme abzuschalten, würde ich dies wohl oder übel machen müssen, aber eigentlich möchte ich es nicht. Schließlich scheint es ja auch bei anderen zu klappen.


    Deshalb noch mal: Hat nicht irgendjemand noch Ideen, woran das beschriebene Problem liegen kann?!
    Aufnahme per Timer - noad setzt Schnittmarken - Aufnahme und Schnittmarken werden fertiggestellt - VDR stürzt ab.


    In diesem Sinne
    Tschökes,
    Groucho

    Guten Morgen!
    Danke Schluzkrapfn, werde auch diesen Vorschlag aufgreifen, nur schon mal vorab an : Wie sah der defekte bzw. überflüssige Link denn aus?!


    Jetzt aber erstmal meine logs von gestern Abend, als sich der VDR nach Abschluß der timerprogrammierten Aufnahme von "Lost" auf Pro7 (Timer bei schon eingeschaltetem VDR) wieder verabschiedete.
    Wir hatten auch noch die nächste Sendung ("Taken") auf Pro7 programmiert, die der VDR ebenfalls schon aufzeichnete, dann aber eben währenddessen abstürzte, allerdings haben wir das Problem nicht nur bei einer weiteren programmierten Aufnahme. Es könnte sich allerdings auf Aufnahmen beschränken, die per Timer bei LAUFENDEM VDR angestoßen werden, also nicht aus dem SHUTDOWN heraus, denn heute Nacht habe ich die Wiederholung von "Taken" auf Pro7 per Timer aus ausgeschaltetem VDR aufgenommen und heute Morgen war alles in Ordnung, also der VDR ließ sich am "normalen" Power-Button einschalten.
    .
    Hier aber nun die logs bis kurz vor dem Absturz gestern Abend:


    Jun 13 19:45:53 linvdr user.debug vdr[1082]: buffer stats: 0 (0%) used
    Jun 13 19:45:53 linvdr user.debug vdr[1082]: creating directory /vtx/S19.2E-1-1089-12003
    Jun 13 19:45:53 linvdr user.debug vdr[1139]: receiver on device 1 thread started (pid=1139, tid=19467)
    Jun 13 19:45:53 linvdr user.debug vdr[1140]: TS buffer on device 1 thread started (pid=1140, tid=20492)
    Jun 13 19:45:55 linvdr user.info vdr[1088]: channel 9 (VOX) event 19:45 'Hör mal, wer da hämmert' status 4
    Jun 13 19:45:55 linvdr user.info vdr[1088]: channel 8 (Super RTL) event 19:45 'SpongeBob Schwammkopf' status 4
    Jun 13 19:45:55 linvdr user.info vdr[1088]: channel 3 (RTL Television) event 19:40 'Gute Zeiten, schlechte Zeiten' status 4
    Jun 13 19:47:15 linvdr user.debug vdr[1091]: changing caids of channel 828 from 1801,1702 to 0
    Jun 13 19:47:15 linvdr user.debug vdr[1091]: changing ca descriptors of channel 828
    Jun 13 19:50:01 linvdr cron.notice crond[1122]: USER root pid 1143 cmd convert.pl -q -s
    Jun 13 19:52:27 linvdr syslog.info -- MARK --
    Jun 13 19:54:19 linvdr user.debug vdr[1091]: changing caids of channel 100 from 1702,1801,1722 to 0
    Jun 13 19:54:19 linvdr user.debug vdr[1091]: changing ca descriptors of channel 100
    Jun 13 19:54:36 linvdr user.info vdr[1091]: channel 1 (Das Erste) event 19:53 'Werbung' status 4
    Jun 13 19:54:42 linvdr user.info vdr[1091]: channel 1 (Das Erste) event 19:55 'Börse im Ersten' status 4
    Jun 13 19:54:42 linvdr user.debug vdr[1091]: changing pids of channel 630 from 901+901:902:204 to 701+701:702:204
    Jun 13 19:54:57 linvdr user.info vdr[1091]: channel 2 (ZDF) event 19:25 'WISO' status 3
    Jun 13 19:54:58 linvdr user.info vdr[1091]: channel 21 (KiKa) event 19:50 'logo!' status 4
    Jun 13 19:55:01 linvdr cron.notice crond[1122]: USER root pid 1144 cmd convert.pl -q -s
    Jun 13 19:55:18 linvdr user.debug vdr[1091]: changing name of channel 868 from 'D 1 - 18:00,;' to 'D 1 - 20:00,;'
    Jun 13 19:55:18 linvdr user.debug vdr[1091]: changing name of channel 810 from 'D 2 - 18:00,;' to 'D 2 - 20:00,;'
    Jun 13 19:55:18 linvdr user.debug vdr[1091]: changing name of channel 869 from 'D 3 - 18:15,;' to 'D 3 - 20:00,;'
    Jun 13 19:55:18 linvdr user.debug vdr[1091]: linking channel 803 from 806 807 808 812 871 811 to 806 807 868 808 810 869 812 871 811
    Jun 13 19:58:47 linvdr user.info vdr[1088]: channel 7 (RTL2) event 20:00 'RTL II News' status 4
    Jun 13 20:00:01 linvdr cron.notice crond[1122]: USER root pid 1145 cmd convert.pl -q -s
    Jun 13 20:00:55 linvdr user.info vdr[1091]: channel 5 (ProSieben) event 19:59 'NEWSTIME' status 4
    Jun 13 20:03:00 linvdr user.debug vdr[1091]: changing pids of channel 774 from 511+511:512=deu,513=deu;515=deu:32 to 511+511:512=deu;515=deu:32
    Jun 13 20:03:05 linvdr user.debug vdr[1091]: changing caids of channel 100 from 0 to 1702,1801,1722
    Jun 13 20:03:05 linvdr user.debug vdr[1091]: changing ca descriptors of channel 100
    Jun 13 20:03:21 linvdr user.info vdr[1091]: channel 16 (BR-alpha) event 20:00 'Die Abendschau' status 4
    Jun 13 20:03:21 linvdr user.info vdr[1091]: channel 17 (SÜDWEST BW) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:21 linvdr user.info vdr[1091]: channel 22 (arte) event 20:00 'ARTE Kultur / ARTE Meteo' status 4
    Jun 13 20:03:21 linvdr user.info vdr[1091]: channel 20 (Phoenix) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:22 linvdr user.info vdr[1091]: channel 13 (hr-fernsehen) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:22 linvdr user.info vdr[1091]: channel 1 (Das Erste) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:22 linvdr user.info vdr[1091]: channel 15 (SR Fernsehen Südwest) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:22 linvdr user.info vdr[1091]: channel 12 (WDR Köln) event 20:00 'Tagesschau' status 4
    Jun 13 20:03:28 linvdr user.debug vdr[1091]: changing pids of channel 630 from 701+701:702:204 to 901+901:902:204
    Jun 13 20:03:42 linvdr user.info vdr[1091]: channel 23 (ZDFinfokanal) event 20:00 'AKTUELL' status 4
    Jun 13 20:03:42 linvdr user.info vdr[1091]: channel 21 (KiKa) event 20:00 'KI.KA LIVE' status 4
    Jun 13 20:03:43 linvdr user.info vdr[1091]: channel 2 (ZDF) event 19:25 'WISO' status 4
    Jun 13 20:03:43 linvdr user.info vdr[1091]: channel 18 (Eurosport) event 20:00 'Eurosport Spezial' status 4
    Jun 13 20:03:43 linvdr user.info vdr[1091]: channel 10 (3sat) event 20:00 'Tagesschau' status 4
    Jun 13 20:04:04 linvdr user.debug vdr[1091]: changing pids of channel 811 from 2303+2303:2304=deu:32 to 2303+2303:2304=deu,2305=deu:32
    Jun 13 20:04:08 linvdr user.debug vdr[1091]: changing name of channel 811 from 'D 9 - 19:00,;' to 'D 9 - 20:01,;'
    Jun 13 20:04:08 linvdr user.debug vdr[1091]: linking channel 803 from 806 807 868 808 810 869 812 871 811 to 806 807 868 810 869 812 871 811
    Jun 13 20:04:24 linvdr user.info vdr[1091]: channel 26 (EinsExtra) event 20:00 'Tagesschau' status 4
    Jun 13 20:04:24 linvdr user.info vdr[1091]: channel 27 (EinsFestival) event 20:00 'Tagesschau' status 4
    Jun 13 20:04:25 linvdr user.info vdr[1091]: channel 11 (NDR FS MV) event 20:00 'Tagesschau' status 4
    Jun 13 20:04:25 linvdr user.info vdr[1091]: channel 28 (EinsPlus) event 20:00 'Tagesschau' status 4
    Jun 13 20:04:28 linvdr user.debug vdr[1091]: changing pids of channel 32 from 501+501:502=deu:504 to 601+601:602=deu:604
    Jun 13 20:04:39 linvdr user.debug vdr[1091]: changing pids of channel 11 from 301+301:302=deu:2404 to 2401+2401:2402=deu:2404
    Jun 13 20:04:39 linvdr user.debug vdr[1091]: changing pids of channel 824 from 101+101:102=deu:2404 to 2401+2401:2402=deu:2404
    Jun 13 20:04:41 linvdr user.debug vdr[1091]: changing pids of channel 826 from 201+201:202=deu:2404 to 2401+2401:2402=deu:2404
    Jun 13 20:04:45 linvdr user.debug vdr[1091]: changing caids of channel 828 from 0 to 1801,1702
    Jun 13 20:04:45 linvdr user.debug vdr[1091]: changing ca descriptors of channel 828
    Jun 13 20:05:01 linvdr cron.notice crond[1122]: USER root pid 1146 cmd convert.pl -q -s
    Jun 13 20:10:01 linvdr cron.notice crond[1122]: USER root pid 1147 cmd convert.pl -q -s
    Jun 13 20:11:45 linvdr user.debug vdr[1091]: changing pids of channel 777 from 767+767:768=deu,769=deu:32 to 767+767:768=deu:32
    Jun 13 20:12:13 linvdr user.debug vdr[1091]: changing pids of channel 630 from 901+901:902:204 to 701+701:702:204
    Jun 13 20:12:27 linvdr syslog.info -- MARK --
    Jun 13 20:12:28 linvdr user.info vdr[1091]: channel 21 (KiKa) event 20:10 'Weit weg' status 4
    Jun 13 20:12:38 linvdr user.info vdr[1082]: connect from 127.0.0.1, port 32771 - accepted
    Jun 13 20:12:40 linvdr user.info vdr[1082]: closing SVDRP connection
    Jun 13 20:13:00 linvdr user.debug vdr[1082]: switching device 2 to channel 5
    Jun 13 20:13:00 linvdr user.info vdr[1082]: timer 1 (5 2013-2122 'Lost') start
    Jun 13 20:13:00 linvdr user.debug vdr[1082]: Title: 'Lost' Subtitle: '(null)'
    Jun 13 20:13:00 linvdr user.info vdr[1082]: executing '/usr/bin/noadcall.sh before "/video0/Lost/2005-06-13.20.13.50.50.rec"'
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[0]: /usr/bin/noad
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[1]: before
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[2]: /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[3]: --online=2
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[4]: --ac3
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[5]: --overlap
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[6]: --jumplogo
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[7]: --comments
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[8]: --asd
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad arg[9]: --statisticfile=/video0/noadonlinestat
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad args done
    Jun 13 20:13:00 linvdr user.info noad[1150]: wait 60 secs for vdr creating directory
    Jun 13 20:13:00 linvdr user.info noad[1149]: noad forked to pid 1150
    Jun 13 20:13:00 linvdr user.info vdr[1082]: record /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 20:13:00 linvdr user.debug vdr[1082]: creating directory /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 20:13:00 linvdr user.debug vdr[1082]: recording to '/video0/Lost/2005-06-13.20.13.50.50.rec/001.vdr'
    Jun 13 20:13:00 linvdr user.debug vdr[1151]: file writer thread started (pid=1151, tid=21517)
    Jun 13 20:13:00 linvdr user.debug vdr[1152]: recording thread started (pid=1152, tid=22542)
    Jun 13 20:13:00 linvdr user.debug vdr[1153]: receiver on device 2 thread started (pid=1153, tid=23567)
    Jun 13 20:13:00 linvdr user.debug vdr[1154]: TS buffer on device 2 thread started (pid=1154, tid=24592)
    Jun 13 20:13:07 linvdr user.info vdr[1091]: channel 6 (KABEL1) event 20:14 'Agent Null Null Nix - Bill Murray in hirnloser M' status 2
    Jun 13 20:13:38 linvdr user.info vdr[1091]: channel 6 (KABEL1) event 20:14 'Agent Null Null Nix - Bill Murray in hirnloser M' status 4
    Jun 13 20:13:47 linvdr user.info vdr[1088]: channel 8 (Super RTL) event 20:15 'Ein ganz verrückter Freitag' status 4
    Jun 13 20:13:48 linvdr user.info vdr[1088]: channel 3 (RTL Television) event 20:15 'Im Namen des Gesetzes' status 4
    Jun 13 20:13:49 linvdr user.info vdr[1088]: channel 9 (VOX) event 20:15 'CSI - Den Tätern auf der Spur' status 4
    Jun 13 20:13:49 linvdr user.info vdr[1088]: channel 7 (RTL2) event 20:15 'Frauentausch' status 4
    Jun 13 20:14:00 linvdr user.err noad[1150]: nice ERROR(19,0): Bad file descriptor
    Jun 13 20:14:00 linvdr user.info noad[1150]: Monday,13.06.2005 20:14:00 start noad-0.5.3 online for /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 20:14:08 linvdr user.info vdr[1082]: switching to channel 5
    Jun 13 20:14:08 linvdr user.debug vdr[1140]: TS buffer on device 1 thread ended (pid=1140, tid=20492)
    Jun 13 20:14:08 linvdr user.debug vdr[1139]: buffer stats: 4136 (0%) used
    Jun 13 20:14:08 linvdr user.debug vdr[1139]: receiver on device 1 thread ended (pid=1139, tid=19467)
    Jun 13 20:14:08 linvdr user.debug vdr[1082]: buffer stats: 0 (0%) used
    Jun 13 20:14:08 linvdr user.debug vdr[1082]: creating directory /vtx/S19.2E-133-33-898
    Jun 13 20:14:08 linvdr user.debug vdr[1156]: receiver on device 1 thread started (pid=1156, tid=26635)
    Jun 13 20:14:08 linvdr user.debug vdr[1157]: TS buffer on device 1 thread started (pid=1157, tid=27660)
    Jun 13 20:14:11 linvdr user.info vdr[1088]: channel 4 (SAT.1) event 20:15 'SK Kölsch' status 2
    Jun 13 20:14:39 linvdr user.info vdr[1088]: channel 4 (SAT.1) event 20:15 'SK Kölsch' status 4
    Jun 13 20:15:01 linvdr cron.notice crond[1122]: USER root pid 1158 cmd convert.pl -q -s
    Jun 13 20:15:08 linvdr user.info vdr[1088]: channel 5 (ProSieben) event 20:16 'Lost' status 2
    Jun 13 20:15:38 linvdr user.info vdr[1088]: channel 5 (ProSieben) event 20:16 'Lost' status 4
    Jun 13 20:20:01 linvdr cron.notice crond[1122]: USER root pid 1159 cmd convert.pl -q -s
    Jun 13 20:25:01 linvdr cron.notice crond[1122]: USER root pid 1160 cmd convert.pl -q -s
    Jun 13 20:29:50 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:29:50 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:29:54 linvdr user.debug vdr[1161]: dvd-plugin thread started (pid=1161, tid=28689)
    Jun 13 20:29:54 linvdr user.debug vdr[1161]: dvd-plugin: BitStreamOutActive=0, HasBitStreamOut=0 (0)
    Jun 13 20:29:54 linvdr user.debug vdr[1161]: dvd-plugin: SoftDeviceOutActive=0, HasSoftDeviceOut=0
    Jun 13 20:30:01 linvdr cron.notice crond[1122]: USER root pid 1162 cmd convert.pl -q -s
    Jun 13 20:30:03 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:30:03 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:30:12 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:30:12 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:30:15 linvdr user.debug vdr[1161]: dvd-plugin thread ended (pid=1161, tid=28689)
    Jun 13 20:30:15 linvdr user.info vdr[1082]: switching to channel 5
    Jun 13 20:30:16 linvdr user.debug vdr[1157]: TS buffer on device 1 thread ended (pid=1157, tid=27660)
    Jun 13 20:30:16 linvdr user.debug vdr[1156]: buffer stats: 5076 (0%) used
    Jun 13 20:30:16 linvdr user.debug vdr[1156]: receiver on device 1 thread ended (pid=1156, tid=26635)
    Jun 13 20:30:16 linvdr user.debug vdr[1082]: buffer stats: 0 (0%) used
    Jun 13 20:30:16 linvdr user.debug vdr[1164]: receiver on device 1 thread started (pid=1164, tid=30731)
    Jun 13 20:30:16 linvdr user.debug vdr[1165]: TS buffer on device 1 thread started (pid=1165, tid=31756)
    Jun 13 20:32:27 linvdr syslog.info -- MARK --
    Jun 13 20:35:01 linvdr cron.notice crond[1122]: USER root pid 1166 cmd convert.pl -q -s
    Jun 13 20:40:01 linvdr cron.notice crond[1122]: USER root pid 1167 cmd convert.pl -q -s
    Jun 13 20:41:17 linvdr user.debug vdr[1151]: recording to '/video0/Lost/2005-06-13.20.13.50.50.rec/002.vdr'
    Jun 13 20:45:01 linvdr cron.notice crond[1122]: USER root pid 1168 cmd convert.pl -q -s
    Jun 13 20:50:01 linvdr cron.notice crond[1122]: USER root pid 1169 cmd convert.pl -q -s
    Jun 13 20:51:21 linvdr user.info vdr[1082]: switching to channel 1
    Jun 13 20:51:21 linvdr user.debug vdr[1165]: TS buffer on device 1 thread ended (pid=1165, tid=31756)
    Jun 13 20:51:21 linvdr user.debug vdr[1164]: buffer stats: 5076 (0%) used
    Jun 13 20:51:21 linvdr user.debug vdr[1164]: receiver on device 1 thread ended (pid=1164, tid=30731)
    Jun 13 20:51:21 linvdr user.debug vdr[1082]: buffer stats: 0 (0%) used
    Jun 13 20:51:21 linvdr user.debug vdr[1082]: creating directory /vtx/S19.2E-1-1101-28106
    Jun 13 20:51:21 linvdr user.debug vdr[1171]: receiver on device 1 thread started (pid=1171, tid=33803)
    Jun 13 20:51:21 linvdr user.debug vdr[1172]: TS buffer on device 1 thread started (pid=1172, tid=34828)
    Jun 13 20:51:22 linvdr user.info vdr[1088]: channel 12 (WDR Köln) event 20:15 'Länder - Menschen - Abenteuer' status 4
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 16 (BR-alpha) event 20:15 'Alpha-Forum' status 4
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 17 (SÜDWEST BW) event 20:15 'Am Kap der Liebe' status 4
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 22 (arte) event 20:45 'Der Fall der Götter' status 4
    Jun 13 20:51:23 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:51:23 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 20 (Phoenix) event 20:15 'Das Gas-Kartell' status 4
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 13 (hr-fernsehen) event 20:45 'SOS - Haus & Garten' status 4
    Jun 13 20:51:23 linvdr user.info vdr[1088]: channel 1 (Das Erste) event 20:15 'Der Fahnder' status 4
    Jun 13 20:51:24 linvdr user.info vdr[1088]: channel 15 (SR Fernsehen Südwest) event 20:15 'Am Kap der Liebe' status 4
    Jun 13 20:51:24 linvdr user.info vdr[1088]: channel 14 (Bayerisches FS) event 20:15 'Die Sprechstunde' status 4
    Jun 13 20:51:29 linvdr user.debug vdr[1088]: changing pids of channel 630 from 701+701:702:204 to 901+901:902:204
    Jun 13 20:52:10 linvdr user.debug vdr[1088]: changing pids of channel 630 from 901+901:902:204 to 701+701:702:204
    Jun 13 20:52:27 linvdr syslog.info -- MARK --
    Jun 13 20:53:12 linvdr user.debug vdr[1088]: changing pids of channel 630 from 701+701:702:204 to 901+901:902:204
    Jun 13 20:53:34 linvdr user.info vdr[1088]: System Time = Mon Jun 13 20:53:34 2005 (1118688814)
    Jun 13 20:53:34 linvdr user.info vdr[1088]: Local Time = Mon Jun 13 20:53:31 2005 (1118688811)
    Jun 13 20:54:04 linvdr user.debug vdr[1088]: changing pids of channel 630 from 901+901:902:204 to 701+701:702:204
    Jun 13 20:54:28 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:54:28 linvdr user.err vdr[1082]: no translation found for 'SysInfo' in language 1 (Deutsch)
    Jun 13 20:54:30 linvdr user.info vdr[1082]: switching to channel 5
    Jun 13 20:54:31 linvdr user.debug vdr[1172]: TS buffer on device 1 thread ended (pid=1172, tid=34828)
    Jun 13 20:54:31 linvdr user.debug vdr[1171]: buffer stats: 3948 (0%) used
    Jun 13 20:54:31 linvdr user.debug vdr[1171]: receiver on device 1 thread ended (pid=1171, tid=33803)
    Jun 13 20:54:31 linvdr user.debug vdr[1082]: buffer stats: 0 (0%) used
    Jun 13 20:54:31 linvdr user.debug vdr[1174]: receiver on device 1 thread started (pid=1174, tid=36875)
    Jun 13 20:54:31 linvdr user.debug vdr[1175]: TS buffer on device 1 thread started (pid=1175, tid=37900)
    Jun 13 20:55:01 linvdr cron.notice crond[1122]: USER root pid 1176 cmd convert.pl -q -s
    Jun 13 20:59:06 linvdr user.debug vdr[1088]: changing name of channel 809 from 'Basketball BBL,;' to 'Baseball MLB,;'
    Jun 13 21:00:01 linvdr cron.notice crond[1122]: USER root pid 1177 cmd convert.pl -q -s
    Jun 13 21:05:01 linvdr cron.notice crond[1122]: USER root pid 1178 cmd convert.pl -q -s
    Jun 13 21:09:00 linvdr user.debug vdr[1082]: switching device 2 to channel 5
    Jun 13 21:09:00 linvdr user.info vdr[1082]: timer 2 (5 2109-2310 'Steven Spielberg präsentiert Taken: Hinter de') start
    Jun 13 21:09:00 linvdr user.debug vdr[1082]: Title: 'Steven Spielberg präsentiert Taken: Hinter de' Subtitle: 'Steven Spielberg präsentiert Taken: Hinter dem Himmel'
    Jun 13 21:09:00 linvdr user.info vdr[1082]: executing '/usr/bin/noadcall.sh before "/video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec"'
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[0]: /usr/bin/noad
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[1]: before
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[2]: /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[3]: --online=2
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[4]: --ac3
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[5]: --overlap
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[6]: --jumplogo
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[7]: --comments
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[8]: --asd
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad arg[9]: --statisticfile=/video0/noadonlinestat
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad args done
    Jun 13 21:09:01 linvdr user.info noad[1181]: wait 60 secs for vdr creating directory
    Jun 13 21:09:01 linvdr user.info noad[1180]: noad forked to pid 1181
    Jun 13 21:09:01 linvdr user.info vdr[1082]: record /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:09:01 linvdr user.debug vdr[1082]: creating directory /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de
    Jun 13 21:09:01 linvdr user.debug vdr[1082]: creating directory /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:09:01 linvdr user.debug vdr[1082]: recording to '/video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec/001.vdr'
    Jun 13 21:09:01 linvdr user.debug vdr[1182]: file writer thread started (pid=1182, tid=38929)
    Jun 13 21:09:01 linvdr user.debug vdr[1183]: recording thread started (pid=1183, tid=39954)
    Jun 13 21:10:01 linvdr user.err noad[1181]: nice ERROR(19,0): Bad file descriptor
    Jun 13 21:10:01 linvdr user.info noad[1181]: Monday,13.06.2005 21:10:01 start noad-0.5.3 online for /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:10:01 linvdr cron.notice crond[1122]: USER root pid 1184 cmd convert.pl -q -s
    Jun 13 21:11:04 linvdr user.info vdr[1088]: channel 5 (ProSieben) event 21:12 'Steven Spielberg präsentiert Taken: Hinter de' status 2
    Jun 13 21:11:35 linvdr user.info vdr[1088]: channel 5 (ProSieben) event 21:12 'Steven Spielberg präsentiert Taken: Hinter de' status 4
    Jun 13 21:12:23 linvdr syslog.info -- MARK --
    Jun 13 21:12:37 linvdr user.info vdr[1082]: connect from 127.0.0.1, port 32772 - accepted
    Jun 13 21:12:39 linvdr user.info vdr[1082]: closing SVDRP connection
    Jun 13 21:13:03 linvdr user.debug vdr[1151]: recording to '/video0/Lost/2005-06-13.20.13.50.50.rec/003.vdr'
    Jun 13 21:14:05 linvdr user.info vdr[1088]: channel 4 (SAT.1) event 21:15 'Wolffs Revier' status 2
    Jun 13 21:14:30 linvdr auth.info sshd[1185]: Could not reverse map address 192.168.0.13.
    Jun 13 21:14:33 linvdr auth.info sshd[1185]: Accepted password for root from 192.168.0.13 port 1565 ssh2
    Jun 13 21:14:33 linvdr auth.info sshd[1185]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Jun 13 21:14:33 linvdr auth.info PAM_unix[1185]: (ssh) session opened for user root by (uid=0)
    Jun 13 21:14:33 linvdr auth.err PAM-env[1185]: Unable to open config file: No such file or directory
    Jun 13 21:14:33 linvdr auth.err PAM-env[1186]: Unable to open config file: No such file or directory
    Jun 13 21:14:34 linvdr user.info vdr[1088]: channel 4 (SAT.1) event 21:15 'Wolffs Revier' status 4
    Jun 13 21:15:01 linvdr cron.notice crond[1122]: USER root pid 1188 cmd convert.pl -q -s
    Jun 13 21:16:16 linvdr auth.info PAM_unix[1185]: (ssh) session closed for user root
    Jun 13 21:16:16 linvdr auth.err sshd[1185]: PAM pam_putenv: delete non-existent entry; MAIL
    Jun 13 21:16:16 linvdr auth.err PAM-env[1185]: Unable to open config file: No such file or directory
    Jun 13 21:16:49 linvdr auth.info sshd[1194]: Could not reverse map address 192.168.0.13.
    Jun 13 21:16:54 linvdr auth.info sshd[1194]: Accepted password for root from 192.168.0.13 port 1566 ssh2
    Jun 13 21:16:54 linvdr auth.info PAM_unix[1194]: (ssh) session opened for user root by (uid=0)
    Jun 13 21:16:54 linvdr auth.err PAM-env[1194]: Unable to open config file: No such file or directory
    Jun 13 21:16:54 linvdr auth.err PAM-env[1195]: Unable to open config file: No such file or directory
    Jun 13 21:20:01 linvdr cron.notice crond[1122]: USER root pid 1208 cmd convert.pl -q -s
    Jun 13 21:22:00 linvdr user.debug vdr[1152]: recording thread ended (pid=1152, tid=22542)
    Jun 13 21:22:00 linvdr user.debug vdr[1151]: file writer thread ended (pid=1151, tid=21517)
    Jun 13 21:22:00 linvdr user.debug vdr[1082]: buffer stats: 111860 (2%) used
    Jun 13 21:22:00 linvdr user.info vdr[1082]: timer 1 (5 2013-2122 'Lost') stop
    Jun 13 21:22:00 linvdr user.info vdr[1082]: executing '/usr/bin/noadcall.sh after "/video0/Lost/2005-06-13.20.13.50.50.rec"'
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[0]: /usr/bin/noad
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[1]: after
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[2]: /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[3]: --online=2
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[4]: --ac3
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[5]: --overlap
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[6]: --jumplogo
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[7]: --comments
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[8]: --asd
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[9]: --backupmarks
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad arg[10]: --statisticfile=/video0/noadstat
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad args done
    Jun 13 21:22:01 linvdr user.err noad[1220]: There is already running an instance of noad for this recording!
    Jun 13 21:22:01 linvdr user.err noad[1220]: If you feel that this is not true, you have to delete the file
    Jun 13 21:22:01 linvdr user.err noad[1220]: /video0/Lost/2005-06-13.20.13.50.50.rec/noad.pid manually
    Jun 13 21:22:01 linvdr user.info noad[1219]: noad forked to pid 1220
    Jun 13 21:22:01 linvdr user.info noad[1220]: pid info for 1150: 20:12:57 00:05:22 /usr/bin/noad before /video0/Lost/2005-06-13.20.13.50.50.rec --online=2 --ac3 --overlap --jumplogo --comments --asd --statisticfile=/video0/noadonlinestat
    Jun 13 21:22:01 linvdr user.info noad[1220]: wait 120 secs for stop of online-noad
    Jun 13 21:22:36 linvdr user.info noad[1150]: Monday,13.06.2005 21:22:36 noad online done for /video0/Lost/2005-06-13.20.13.50.50.rec (1:08:36)
    Jun 13 21:23:00 linvdr user.info vdr[1082]: deleting timer 1 (5 2013-2122 'Lost')
    Jun 13 21:24:01 linvdr user.err noad[1220]: nice ERROR(19,0): Bad file descriptor
    Jun 13 21:24:01 linvdr user.info noad[1220]: Monday,13.06.2005 21:24:01 start noad-0.5.3 for /video0/Lost/2005-06-13.20.13.50.50.rec
    Jun 13 21:25:01 linvdr cron.notice crond[1122]: USER root pid 1231 cmd convert.pl -q -s
    Jun 13 21:28:50 linvdr auth.info PAM_unix[1194]: (ssh) session closed for user root
    Jun 13 21:28:50 linvdr auth.err sshd[1194]: PAM pam_putenv: delete non-existent entry; MAIL
    Jun 13 21:28:50 linvdr auth.err PAM-env[1194]: Unable to open config file: No such file or directory
    Jun 13 21:28:56 linvdr auth.info sshd[2037]: Could not reverse map address 192.168.0.13.
    Jun 13 21:28:58 linvdr auth.info sshd[2037]: Accepted password for root from 192.168.0.13 port 1567 ssh2
    Jun 13 21:28:58 linvdr auth.info PAM_unix[2037]: (ssh) session opened for user root by (uid=0)
    Jun 13 21:28:58 linvdr auth.err PAM-env[2037]: Unable to open config file: No such file or directory
    Jun 13 21:28:58 linvdr auth.err PAM-env[2038]: Unable to open config file: No such file or directory



    Dann ging der VDR aus, ich konnte ihn nur per Netzaus / -ein wieder anschalten mit dann folgenden logs:



    Jun 13 21:32:08 linvdr user.info vdr[1059]: starting plugin: games
    Jun 13 21:32:08 linvdr user.info vdr[1059]: starting plugin: image
    Jun 13 21:32:08 linvdr user.info vdr[1059]: loading /etc/vdr/plugins/imagesources.conf
    Jun 13 21:32:08 linvdr user.info vdr[1059]: starting plugin: mlcd
    Jun 13 21:32:09 linvdr user.info kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: mp3
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: mplayer
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: osdteletext
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: sleeptimer
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: streamdev-server
    Jun 13 21:32:09 linvdr user.info vdr[1059]: loading /etc/vdr/plugins/streamdevhosts.conf
    Jun 13 21:32:09 linvdr user.info vdr[1059]: loading /etc/vdr/plugins/streamdevhosts.conf
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: sysinfo
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: text2skin
    Jun 13 21:32:09 linvdr user.debug vdr[1103]: Streamdev: server thread started (pid=1103, tid=6151)
    Jun 13 21:32:09 linvdr user.info vdr[1103]: Streamdev: Listening (VTP) on port 2004
    Jun 13 21:32:09 linvdr user.info vdr[1103]: Streamdev: Listening (HTTP) on port 3000
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.trans
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.colors
    Jun 13 21:32:09 linvdr user.info vdr[1059]: parsing /etc/vdr/plugins/text2skin/EgalsTry/EgalsTry.skin
    Jun 13 21:32:09 linvdr user.err vdr[1059]: ERROR: text2skin: Skin is version , expecting 1.0
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.trans
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/demo/demo.colors
    Jun 13 21:32:09 linvdr user.info vdr[1059]: parsing /etc/vdr/plugins/text2skin/demo/demo.skin
    Jun 13 21:32:09 linvdr user.err vdr[1059]: ERROR: text2skin: Skin is version , expecting 1.0
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.trans
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.colors
    Jun 13 21:32:09 linvdr user.info vdr[1059]: parsing /etc/vdr/plugins/text2skin/Mandaxy/Mandaxy.skin
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '({PresentVPSDateTime:%H\:%M})' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{PresentDuration:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{PresentRemaining:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '({FollowingVPSDateTime:%H\:%M})' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{FollowingDuration:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{ReplayPosition}/{ReplayDuration}' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentRemaining:%m}/{PresentDuration:%m}')' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for '{PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentDuration:%m}')' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for 'Message' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Mandaxy: no translation found for 'Message' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.trans
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/Enigma/Enigma.colors
    Jun 13 21:32:09 linvdr user.info vdr[1059]: parsing /etc/vdr/plugins/text2skin/Enigma/Enigma.skin
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{PresentDuration:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '+{PresentRemaining:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{FollowingDuration:%m}'' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{PresentTitle}~{PresentShortText}' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{PresentStartDateTime:%d.%m.} {PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentRemaining:%m}/{PresentDuration:%m}')' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_Enigma: no translation found for '{PresentStartDateTime:%d.%m.} {PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentDuration:%m}')' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
    Jun 13 21:32:09 linvdr user.info vdr[1059]: text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
    Jun 13 21:32:09 linvdr user.info vdr[1059]: parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for 'Rec:' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for 'Rec:' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1} - {CurrentRecording:2} - {CurrentRecording:3}' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1} - {CurrentRecording:2}' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1}' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.err vdr[1059]: text2skin_DeepBlue: no translation found for '-' in language 1 (Deutsch)
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: timeline
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: tvonscreen
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: vcd
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: vdrc
    Jun 13 21:32:09 linvdr user.info vdr[1059]: starting plugin: vdrcd
    Jun 13 21:32:09 linvdr user.info vdr[1059]: loading /etc/vdr/themes/classic-default.theme
    Jun 13 21:32:09 linvdr user.debug vdr[1104]: LIRC remote control thread started (pid=1104, tid=7176)
    Jun 13 21:32:09 linvdr user.debug vdr[1105]: KBD remote control thread started (pid=1105, tid=8201)
    Jun 13 21:32:09 linvdr user.debug vdr[1059]: remote control LIRC - keys known
    Jun 13 21:32:09 linvdr user.debug vdr[1059]: remote control KBD - keys known
    Jun 13 21:32:09 linvdr user.info vdr[1059]: switching to channel 4
    Jun 13 21:32:09 linvdr user.debug vdr[1059]: creating directory /vtx/S19.2E-133-33-46
    Jun 13 21:32:11 linvdr user.debug vdr[1059]: setting watchdog timer to 900 seconds
    Jun 13 21:32:11 linvdr user.debug vdr[1108]: receiver on device 1 thread started (pid=1108, tid=10251)
    Jun 13 21:32:11 linvdr user.debug vdr[1109]: TS buffer on device 1 thread started (pid=1109, tid=11276)
    Jun 13 21:32:11 linvdr user.info vdr[1059]: timer 1 (5 2109-2310 'Steven Spielberg präsentiert Taken: Hinter de') set to event Mon 13.06.2005 21:12-23:00 'Steven Spielberg präsentiert Taken: Hinter de'
    Jun 13 21:32:11 linvdr user.debug vdr[1059]: switching device 2 to channel 5
    Jun 13 21:32:11 linvdr user.info vdr[1059]: timer 1 (5 2109-2310 'Steven Spielberg präsentiert Taken: Hinter de') start
    Jun 13 21:32:11 linvdr user.debug vdr[1059]: Title: 'Steven Spielberg präsentiert Taken: Hinter de' Subtitle: 'Steven Spielberg präsentiert Taken: Hinter dem Himmel'
    Jun 13 21:32:11 linvdr user.info vdr[1059]: executing '/usr/bin/noadcall.sh before "/video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec"'
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[0]: /usr/bin/noad
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[1]: before
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[2]: /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[3]: --online=2
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[4]: --ac3
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[5]: --overlap
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[6]: --jumplogo
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[7]: --comments
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[8]: --asd
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad arg[9]: --statisticfile=/video0/noadonlinestat
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad args done
    Jun 13 21:32:11 linvdr user.info noad[1112]: wait 60 secs for vdr creating directory
    Jun 13 21:32:11 linvdr user.info noad[1111]: noad forked to pid 1112
    Jun 13 21:32:11 linvdr user.info vdr[1059]: record /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec
    Jun 13 21:32:11 linvdr user.debug vdr[1059]: recording to '/video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec/002.vdr'
    Jun 13 21:32:11 linvdr user.debug vdr[1113]: file writer thread started (pid=1113, tid=12301)
    Jun 13 21:32:11 linvdr user.debug vdr[1114]: recording thread started (pid=1114, tid=13326)
    Jun 13 21:32:11 linvdr user.debug vdr[1115]: receiver on device 2 thread started (pid=1115, tid=14351)
    Jun 13 21:32:11 linvdr user.debug vdr[1116]: TS buffer on device 2 thread started (pid=1116, tid=15376)
    Jun 13 21:32:11 linvdr user.info vdr[1088]: channel 25 (HSE24) event 08:00 '24 Stunden Shoppingvergnügen' status 4
    Jun 13 21:32:11 linvdr user.debug vdr[1088]: changing portal name of channel 872 from '' to 'Portal'
    Jun 13 21:32:11 linvdr user.debug vdr[1088]: linking channel 872 from none to 809
    Jun 13 21:32:11 linvdr user.info vdr[1088]: channel 4 (SAT.1) event 21:15 'Wolffs Revier' status 4
    Jun 13 21:32:11 linvdr user.info vdr[1088]: channel 5 (ProSieben) event 21:12 'Steven Spielberg präsentiert Taken: Hinter de' status 4
    Jun 13 21:32:12 linvdr user.info vdr[1088]: channel 6 (KABEL1) event 20:14 'Agent Null Null Nix - Bill Murray in hirnloser M' status 4
    Jun 13 21:32:12 linvdr auth.info sshd[1106]: Could not reverse map address 192.168.0.13.
    Jun 13 21:32:12 linvdr user.info vdr[1059]: connect from 127.0.0.1, port 32769 - accepted
    Jun 13 21:32:14 linvdr user.debug vdr[1059]: max. latency time 2 seconds
    Jun 13 21:32:14 linvdr user.info vdr[1059]: closing SVDRP connection
    Jun 13 21:32:15 linvdr auth.info sshd[1106]: Accepted password for root from 192.168.0.13 port 1568 ssh2
    Jun 13 21:32:15 linvdr auth.info sshd[1106]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Jun 13 21:32:15 linvdr auth.info PAM_unix[1106]: (ssh) session opened for user root by (uid=0)
    Jun 13 21:32:15 linvdr auth.err PAM-env[1106]: Unable to open config file: No such file or directory
    Jun 13 21:32:15 linvdr auth.err PAM-env[1119]: Unable to open config file: No such file or directory
    Jun 13 21:32:34 linvdr cron.notice crond[1132]: crond 2.3.2 dillon, started, log level 8
    Jun 13 21:33:11 linvdr user.err noad[1112]: There is already running an instance of noad for this recording!
    Jun 13 21:33:11 linvdr user.err noad[1112]: If you feel that this is not true, you have to delete the file
    Jun 13 21:33:11 linvdr user.err noad[1112]: /video0/Steven_Spielberg_präsentiert_Taken#3A_Hinter_de/2005-06-13.21.09.50.50.rec/noad.pid manually



    Das Ablegen der logs auf der Platte, habe ich inzwischen per Setup eingeschaltet, ich hoffe, beim nächsten Mal habe ich mehr logs.


    Vielleicht kann aber hiermit schon jemand etwas anfangen und uns vor allem bei einer Lösung helfen. Noch mal zur Klarstellung: Wir haben keinen Internetanschluß und das Problem m. E. erst, seit wir den MT-Patch haben und noad automatisch WÄHREND der Aufnahme die Schnittmarken setzt (was natürlich klasse ist und auch gerne so bleiben soll)!


    Bis dann mal und weiterhin vielen Dank,


    Tschökes,
    Groucho

    Hallo!


    Auch das werde ich gerne versuchen - wenn ich es denn hinbekomme.


    Ich wollte aber kurz vor Feierabend noch hierauf http://www.vdr-portal.de/board/thread.php?threadid=31174&sid=&hilight=noad+and+automatisch
    verweisen, da ich den Eindruck habe, daß dort ursprünglich mein Problem diskutiert wurde, nämlich ein Absturz des VDR nach einer Aufnahme im Zusammenhang mit noad.


    Da der Kollege zur Vermeidung des Problems allerdings noad abschalten wollte, wurde nicht mehr darüber gesprochen, wie das Problem behoben werden, sondern lediglich darüber, wie man noad abschalten kann.
    Dies möchte ich aber gerade nicht, ich möchte noad weiternutzen und trotzdem diese Abstürze vermeiden.


    Vielleicht hilft dies ja schon mal bei der Lokalisierung des Fehlers, ich glaube aber schon kapiert zu haben, daß man ohne die Logs nicht sehr weit kommt und werde deshalb - hoffentlich - morgen mehr dazu sagen können.


    In jedem Falle, Gruß an alle,
    Tschökes,
    Groucho

    Hey Alex!


    Erst mal vielen Dank für die flotte Antwort!


    Wenn ich Dich richtig verstehe, soll ich also versuchen, die logfiles in der Zeit VOR dem Absturz zu sammeln?!
    Da ich leider im Büro bin, kann ich dies erst heute Abend erledigen und sie dann - ggf.- Morgen posten.


    Falls Du - oder jemand anderes - schon vorher trotz fehlender logs eine Idee hast, wäre das klasse!


    Jedenfalls schon mal vielen, vielen Dank,


    Tschökes,


    Groucho

    Hallo Zusammen!


    Unser VDR (LinVDR 0.7 mit MT 20050528) schaltet nach (timerprogrammierten) Aufnahmen komplett ab, so daß er nur noch per Netzaus wieder einzuschalten ist. Folgendes Szenario:
    Aufnahme eines Films --- automatisches Setzen der Schnittmarken mit noad --- Aufnahme wird fertig gestellt --- alle Schnittmarken werden gesetzt und zwar sowohl während des Films als auch abschließend nach dessen Ende --- DANN SCHALTET SICH DAS GERÄT VOLLSTÄNDIG AB --- Einschalten nur noch per Netzaus /-an möglich --- Folge natürlich auch, daß weitere Timerprogrammierungen in der gleichen Nacht fehlschlagen.


    Logfiles kann ich nicht angeben, da das Gerät sich ja vollständig verabschiedet.


    Da ich im Grunde gar keine Ahnung habe, wäre ich über eine umfangreiche und vor allem allgemeinverständliche Hilfestellung sehr, sehr dankbar!!


    Also, vielen Dank und Tschökes!


    Groucho