kein vdr screen

Jun 14 19:24:11 tvy kernel: [    0.668568] isapnp: No Plug & Play device found Jun 14 19:24:11 tvy kernel: [    0.668586] Freeing unused kernel memory: 656k freed Jun 14 19:24:11 tvy kernel: [    0.669023] usb 1-1: new high speed USB device using ehci_hcd and address 2 Jun 14 19:24:11 tvy kernel: [    0.669230] Write protecting the kernel text: 4676k Jun 14 19:24:11 tvy kernel: [    0.669267] Write protecting the kernel read-only data: 1840k Jun 14 19:24:11 tvy kernel: [    0.689439] udev: starting version 151 Jun 14 19:24:11 tvy kernel: [    0.803393] Floppy drive(s): fd0 is 1.44M Jun 14 19:24:11 tvy kernel: [    0.804429] usb 1-1: configuration #1 chosen from 1 choice Jun 14 19:24:11 tvy kernel: [    0.822874] FDC 0 is a post-1991 82077 Jun 14 19:24:11 tvy kernel: [    0.840383] scsi0 : pata_amd Jun 14 19:24:11 tvy kernel: [    0.842246] scsi1 : pata_amd Jun 14 19:24:11 tvy kernel: [    0.843015] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jun 14 19:24:11 tvy kernel: [    0.843019] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jun 14 19:24:11 tvy kernel: [    0.843099] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. Jun 14 19:24:11 tvy kernel: [    0.843379] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 Jun 14 19:24:11 tvy kernel: [    0.843387] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 Jun 14 19:24:11 tvy kernel: [    1.004266] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33 Jun 14 19:24:11 tvy kernel: [    1.020208] ata1.00: configured for UDMA/33 Jun 14 19:24:11 tvy kernel: [    1.025858] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5 Jun 14 19:24:11 tvy kernel: [    1.038584] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jun 14 19:24:11 tvy kernel: [    1.038588] Uniform CD-ROM driver Revision: 3.20 Jun 14 19:24:11 tvy kernel: [    1.038802] sr 0:0:0:0: Attached scsi generic sg0 type 5 Jun 14 19:24:11 tvy kernel: [    1.206414] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 Jun 14 19:24:11 tvy kernel: [    1.206435] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 Jun 14 19:24:11 tvy kernel: [    1.264056] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[ea004000-ea0047ff]  Max Packet=[4096]  IR/IT contexts=[4/8] Jun 14 19:24:11 tvy kernel: [    1.365105] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:3e:69:4a Jun 14 19:24:11 tvy kernel: [    1.365110] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 Jun 14 19:24:11 tvy kernel: [    1.365162] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 Jun 14 19:24:11 tvy kernel: [    1.365427] scsi2 : sata_nv Jun 14 19:24:11 tvy kernel: [    1.365543] scsi3 : sata_nv Jun 14 19:24:11 tvy kernel: [    1.365773] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23 Jun 14 19:24:11 tvy kernel: [    1.365777] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23 Jun 14 19:24:11 tvy kernel: [    1.365814] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 Jun 14 19:24:11 tvy kernel: [    1.365958] scsi4 : sata_nv Jun 14 19:24:11 tvy kernel: [    1.366022] scsi5 : sata_nv Jun 14 19:24:11 tvy kernel: [    1.366173] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 22 Jun 14 19:24:11 tvy kernel: [    1.366177] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 22 Jun 14 19:24:11 tvy kernel: [    1.676026] ata3: SATA link down (SStatus 0 SControl 300) Jun 14 19:24:11 tvy kernel: [    1.832039] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 14 19:24:11 tvy kernel: [    1.840288] ata5.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 Jun 14 19:24:11 tvy kernel: [    1.840292] ata5.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 14 19:24:11 tvy kernel: [    1.856291] ata5.00: configured for UDMA/133 Jun 14 19:24:11 tvy kernel: [    1.988024] ata4: SATA link down (SStatus 0 SControl 300) Jun 14 19:24:11 tvy kernel: [    1.988174] scsi 4:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5 Jun 14 19:24:11 tvy kernel: [    1.988450] sd 4:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) Jun 14 19:24:11 tvy kernel: [    1.988498] sd 4:0:0:0: [sda] Write Protect is off Jun 14 19:24:11 tvy kernel: [    1.988525] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 14 19:24:11 tvy kernel: [    1.988766]  sda: Jun 14 19:24:11 tvy kernel: [    1.988901] sd 4:0:0:0: Attached scsi generic sg1 type 0 Jun 14 19:24:11 tvy kernel: [    1.995483]  sda1 sda2 < sda5 > Jun 14 19:24:11 tvy kernel: [    2.005473] sd 4:0:0:0: [sda] Attached SCSI disk Jun 14 19:24:11 tvy kernel: [    2.300033] ata6: SATA link down (SStatus 0 SControl 300) Jun 14 19:24:11 tvy kernel: [    2.388167] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem Jun 14 19:24:11 tvy kernel: [    2.388174] EXT4-fs (dm-0): write access will be enabled during recovery Jun 14 19:24:11 tvy kernel: [    2.488900] EXT4-fs (dm-0): recovery complete Jun 14 19:24:11 tvy kernel: [    2.489305] EXT4-fs (dm-0): mounted filesystem with ordered data mode Jun 14 19:24:11 tvy kernel: [    8.971854] udev: starting version 151 Jun 14 19:24:11 tvy kernel: [    9.012895] Adding 6553592k swap on /dev/mapper/tvy-swap_1.  Priority:-1 extents:1 across:6553592k  Jun 14 19:24:11 tvy kernel: [    9.047496] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 Jun 14 19:24:11 tvy kernel: [    9.047543] i2c i2c-1: nForce2 SMBus adapter at 0x1c40 Jun 14 19:24:11 tvy kernel: [    9.262437] Linux agpgart interface v0.103 Jun 14 19:24:11 tvy kernel: [    9.349604] nvidia: module license 'NVIDIA' taints kernel. Jun 14 19:24:11 tvy kernel: [    9.349612] Disabling lock debugging due to kernel taint Jun 14 19:24:11 tvy kernel: [   10.452143] NVRM: The NVIDIA GeForce FX 5200 GPU installed in this system is Jun 14 19:24:11 tvy kernel: [   10.452147] NVRM:  supported through the NVIDIA 173.14.xx Legacy drivers. Please Jun 14 19:24:11 tvy kernel: [   10.452148] NVRM:  visit http://www.nvidia.com/object/unix.html for more Jun 14 19:24:11 tvy kernel: [   10.452149] NVRM:  information.  The 195.36.15 NVIDIA driver will ignore Jun 14 19:24:11 tvy kernel: [   10.452151] NVRM:  this GPU.  Continuing probe... Jun 14 19:24:11 tvy kernel: [   10.452159] NVRM: No NVIDIA graphics adapter found! Jun 14 19:24:11 tvy kernel: [   10.455314] parport_pc 00:0a: reported by Plug and Play ACPI Jun 14 19:24:11 tvy kernel: [   10.455357] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Jun 14 19:24:11 tvy kernel: [   10.463243] lp: driver loaded but no devices found Jun 14 19:24:11 tvy kernel: [   10.505105] RPC: Registered udp transport module. Jun 14 19:24:11 tvy kernel: [   10.505110] RPC: Registered tcp transport module. Jun 14 19:24:11 tvy kernel: [   10.505112] RPC: Registered tcp NFSv4.1 backchannel transport module. Jun 14 19:24:11 tvy kernel: [   10.535689] ppdev: user-space parallel port driver Jun 14 19:24:11 tvy kernel: [   10.543522] lp0: using parport0 (interrupt-driven). Jun 14 19:24:11 tvy kernel: [   10.550770] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 Jun 14 19:24:11 tvy kernel: [   10.550780] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 Jun 14 19:24:11 tvy kernel: [   10.787607] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 Jun 14 19:24:11 tvy kernel: [   10.872030] intel8x0_measure_ac97_clock: measured 54647 usecs (2680 samples) Jun 14 19:24:11 tvy kernel: [   10.872035] intel8x0: clocking to 46980 Jun 14 19:24:11 tvy kernel: [   11.585595] dib0700: loaded with support for 14 different device-types Jun 14 19:24:11 tvy kernel: [   11.585869] dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state. Jun 14 19:24:11 tvy kernel: [   11.586223] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 14 19:24:11 tvy kernel: [   11.587134] DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3) Jun 14 19:24:11 tvy kernel: [   11.794172] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... Jun 14 19:24:11 tvy kernel: [   12.012140] DiB0070: successfully identified Jun 14 19:24:11 tvy kernel: [   12.012260] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input5 Jun 14 19:24:11 tvy kernel: [   12.012354] dvb-usb: schedule remote query interval to 50 msecs. Jun 14 19:24:11 tvy kernel: [   12.012359] dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected. Jun 14 19:24:11 tvy kernel: [   12.012673] usbcore: registered new interface driver dvb_usb_dib0700 Jun 14 19:24:11 tvy kernel: [   12.540873] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jun 14 19:24:11 tvy signal-event[856]: finished processing signal on-boot Jun 14 19:24:12 tvy vdr: [841] [xine..put] Listening on address '127.0.0.1' port 37890 Jun 14 19:24:12 tvy kernel: [   13.231919] svc: failed to register lockdv1 RPC service (errno 97). Jun 14 19:24:12 tvy kernel: [   13.232815] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Jun 14 19:24:12 tvy kernel: [   13.234969] NFSD: starting 90-second grace period Jun 14 19:24:12 tvy vdr: [1117] [xine..put] Listening on port 37890 Jun 14 19:24:15 tvy vdr: [1163] [xine..put] Detected video size 720x576