tv läuft ein paar sec - und dann bekomm ich keine Kanäle mehr...

pacha_muc · 11. April 2010

ganz ganz komischer fehler in meinem neuen Testsystem (welches ich für einen Freund aufsetze)

yavdr ist in der aktuellen Version vorhanden (1.7.14)

system ist ein MSI KT6V mit einem XP2400 und einer Sparkle8400GS, derzeit eine DVB-T Karte und eine PVR500 installiert (die PVR500 ist aber noch nicht gelaufen, hab noch keinen channelscan gemacht).

Ja, wie im Titel beschrieben starte ich den Rechner, der läuft sauber hoch, dann - egal ob xine, xinliboutput oder xbmc - kann ich ca. 20 sek einen Sender sehen, und dann steht das bild urplötzlich, es geht gar nix mehr, umschalten, vdr reset, nix - nur ein Hinunter-/Hinauffahren bringt wieder das gleiche schauspiel...

logfile

PHP

Apr 11 02:32:58 medienserver vdr: [1870] cVideoRepacker: switching to MPEG1/2 mode
Apr 11 02:32:58 medienserver vdr: [1870] cVideoRepacker: operating in MPEG1/2 mode
Apr 11 02:32:59 medienserver vdr: [1652] EPGSearch: timer conflict check started
Apr 11 02:32:59 medienserver vdr: [1652] EPGSearch: timer conflict check finished
Apr 11 02:33:03 medienserver vdr: [1872] Text2Skin: channelInfo display update thread ended (pid=1550, tid=1872)
Apr 11 02:33:04 medienserver vdr: [1550] max. latency time 1 seconds
Apr 11 02:33:12 medienserver vdr: [1648] changing transponder data of channel 5 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 11 02:33:12 medienserver vdr: [1648] changing transponder data of channel 6 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 11 02:33:12 medienserver vdr: [1648] changing transponder data of channel 7 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 11 02:33:12 medienserver vdr: [1648] changing transponder data of channel 8 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 11 02:33:13 medienserver vdr: [1550] retuning due to modification of channel 6
Apr 11 02:33:13 medienserver vdr: [1550] switching to channel 6
Apr 11 02:33:13 medienserver vdr: [1871] TS buffer on device 1 thread ended (pid=1550, tid=1871)
Apr 11 02:33:13 medienserver vdr: [1870] buffer stats: 44932 (2%) used
Apr 11 02:33:13 medienserver vdr: [1870] receiver on device 1 thread ended (pid=1550, tid=1870)
Apr 11 02:33:13 medienserver vdr: [1874] receiver on device 1 thread started (pid=1550, tid=1874)
Apr 11 02:33:13 medienserver vdr: [1875] TS buffer on device 1 thread started (pid=1550, tid=1875)
Apr 11 02:33:14 medienserver vdr: [1874] cVideoRepacker: switching to MPEG1/2 mode
Apr 11 02:33:14 medienserver vdr: [1874] cVideoRepacker: operating in MPEG1/2 mode
Apr 11 02:33:15 medienserver vdr: [1663] Streamdev: Setting data connection to 127.0.0.1:35362
Apr 11 02:33:15 medienserver vdr: [1877] streamdev-writer thread started (pid=1550, tid=1877)
Apr 11 02:33:15 medienserver vdr: [1878] streamdev-livestreaming thread started (pid=1550, tid=1878)
Apr 11 02:33:15 medienserver vdr: [1875] TS buffer on device 1 thread ended (pid=1550, tid=1875)
Apr 11 02:33:15 medienserver vdr: [1874] buffer stats: 39292 (1%) used
Apr 11 02:33:15 medienserver vdr: [1874] receiver on device 1 thread ended (pid=1550, tid=1874)
Apr 11 02:33:15 medienserver vdr: [1879] receiver on device 1 thread started (pid=1550, tid=1879)
Apr 11 02:33:15 medienserver vdr: [1880] TS buffer on device 1 thread started (pid=1550, tid=1880)
Apr 11 02:33:16 medienserver vdr: [1550] switching to channel 6
Apr 11 02:33:16 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:33:16 medienserver vdr: [1882] Text2Skin: message display update thread started (pid=1550, tid=1882)
Apr 11 02:33:17 medienserver vdr: [1880] TS buffer on device 1 thread ended (pid=1550, tid=1880)
Apr 11 02:33:17 medienserver vdr: [1879] buffer stats: 50948 (2%) used
Apr 11 02:33:17 medienserver vdr: [1879] receiver on device 1 thread ended (pid=1550, tid=1879)
Apr 11 02:33:17 medienserver vdr: [1883] receiver on device 1 thread started (pid=1550, tid=1883)
Apr 11 02:33:17 medienserver vdr: [1884] TS buffer on device 1 thread started (pid=1550, tid=1884)
Apr 11 02:33:17 medienserver vdr: [1884] TS buffer on device 1 thread ended (pid=1550, tid=1884)
Apr 11 02:33:17 medienserver vdr: [1883] buffer stats: 33088 (1%) used
Apr 11 02:33:17 medienserver vdr: [1883] receiver on device 1 thread ended (pid=1550, tid=1883)
Apr 11 02:33:17 medienserver vdr: [1885] receiver on device 1 thread started (pid=1550, tid=1885)
Apr 11 02:33:17 medienserver vdr: [1886] TS buffer on device 1 thread started (pid=1550, tid=1886)
Apr 11 02:33:18 medienserver vdr: [1882] Text2Skin: message display update thread ended (pid=1550, tid=1882)
Apr 11 02:33:18 medienserver vdr: [1550] max. latency time 3 seconds
Apr 11 02:33:27 medienserver vdr: [1550] switching to channel 6
Apr 11 02:33:27 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:33:27 medienserver vdr: [1892] Text2Skin: message display update thread started (pid=1550, tid=1892)
Apr 11 02:33:29 medienserver vdr: [1892] Text2Skin: message display update thread ended (pid=1550, tid=1892)
Apr 11 02:33:38 medienserver vdr: [1550] switching to channel 6
Apr 11 02:33:38 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:33:38 medienserver vdr: [1894] Text2Skin: message display update thread started (pid=1550, tid=1894)
Apr 11 02:33:40 medienserver vdr: [1894] Text2Skin: message display update thread ended (pid=1550, tid=1894)
Apr 11 02:33:41 medienserver init: tty1 main process (1811) terminated with status 1
Apr 11 02:33:41 medienserver init: tty1 main process ended, respawning
Apr 11 02:33:49 medienserver vdr: [1550] switching to channel 6
Apr 11 02:33:49 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:33:49 medienserver vdr: [1896] Text2Skin: message display update thread started (pid=1550, tid=1896)
Apr 11 02:33:51 medienserver vdr: [1896] Text2Skin: message display update thread ended (pid=1550, tid=1896)
Apr 11 02:34:00 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:00 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:00 medienserver vdr: [1897] Text2Skin: message display update thread started (pid=1550, tid=1897)
Apr 11 02:34:02 medienserver vdr: [1897] Text2Skin: message display update thread ended (pid=1550, tid=1897)
Apr 11 02:34:11 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:11 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:11 medienserver vdr: [1898] Text2Skin: message display update thread started (pid=1550, tid=1898)
Apr 11 02:34:13 medienserver vdr: [1898] Text2Skin: message display update thread ended (pid=1550, tid=1898)
Apr 11 02:34:22 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:22 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:22 medienserver vdr: [1901] Text2Skin: message display update thread started (pid=1550, tid=1901)
Apr 11 02:34:24 medienserver vdr: [1901] Text2Skin: message display update thread ended (pid=1550, tid=1901)
Apr 11 02:34:33 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:33 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:33 medienserver vdr: [1903] Text2Skin: message display update thread started (pid=1550, tid=1903)
Apr 11 02:34:35 medienserver vdr: [1903] Text2Skin: message display update thread ended (pid=1550, tid=1903)
Apr 11 02:34:44 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:44 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:44 medienserver vdr: [1906] Text2Skin: message display update thread started (pid=1550, tid=1906)
Apr 11 02:34:46 medienserver vdr: [1906] Text2Skin: message display update thread ended (pid=1550, tid=1906)
Apr 11 02:34:55 medienserver vdr: [1550] switching to channel 6
Apr 11 02:34:55 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:34:55 medienserver vdr: [1907] Text2Skin: message display update thread started (pid=1550, tid=1907)
Apr 11 02:34:57 medienserver vdr: [1907] Text2Skin: message display update thread ended (pid=1550, tid=1907)
Apr 11 02:35:06 medienserver vdr: [1550] switching to channel 6
Apr 11 02:35:06 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:35:06 medienserver vdr: [1910] Text2Skin: message display update thread started (pid=1550, tid=1910)
Apr 11 02:35:08 medienserver vdr: [1910] Text2Skin: message display update thread ended (pid=1550, tid=1910)
Apr 11 02:35:17 medienserver vdr: [1550] switching to channel 6
Apr 11 02:35:17 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:35:17 medienserver vdr: [1911] Text2Skin: message display update thread started (pid=1550, tid=1911)
Apr 11 02:35:19 medienserver vdr: [1911] Text2Skin: message display update thread ended (pid=1550, tid=1911)
Apr 11 02:35:28 medienserver vdr: [1550] switching to channel 6
Apr 11 02:35:28 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:35:28 medienserver vdr: [1912] Text2Skin: message display update thread started (pid=1550, tid=1912)
Apr 11 02:35:30 medienserver vdr: [1912] Text2Skin: message display update thread ended (pid=1550, tid=1912)
Apr 11 02:35:39 medienserver vdr: [1550] switching to channel 6
Apr 11 02:35:39 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:35:39 medienserver vdr: [1913] Text2Skin: message display update thread started (pid=1550, tid=1913)
Apr 11 02:35:41 medienserver vdr: [1913] Text2Skin: message display update thread ended (pid=1550, tid=1913)
Apr 11 02:35:50 medienserver vdr: [1550] switching to channel 6
Apr 11 02:35:50 medienserver vdr: [1550] info: Kanal nicht verfügbar!
Apr 11 02:35:50 medienserver vdr: [1915] Text2Skin: message display update thread started (pid=1550, tid=1915)
Apr 11 02:35:52 medienserver vdr: [1915] Text2Skin: message display update thread ended (pid=1550, tid=1915)

Alles anzeigen

irgendwie kommts mir vor als wenn irgendetwas den Speicher zumacht und dann nichts mehr läuft... - aber mit meinem gefährlichen Halbwissen ist nun guter Rat teuer.....

vielleicht kann mir jemand die Lampe für den Blick ins Dunkel anmachen...

Gruß

Peter

steffen_b · 11. April 2010

sieht mir so aus als wenn irgendetwas streamen möchte, du nur eine TV Karte hast und somit kein Empfangsgerät fürs normale TV über ist.

pacha_muc · 11. April 2010

ja, aber der schein trügt... der input kommt über ne hauppage via dvb-t und der output via xine mit einer 8400gs... also nix aussergewöhnliches...

wirbel · 11. April 2010

Versuchs doch mal ohne streamdev

pacha_muc · 11. April 2010

versuchen kann ichs schon ohne streamdev, aber ich brauch das plugin...

wirbel · 11. April 2010

Das ist doch ne völlig andere Frage. Nur wie willst du sonst herausbekommen was die Ursache ist?

pacha_muc · 11. April 2010

ich glaub vielmehr das es irgendwas mit dem noch nicht im trunk befindlichen xbmc-pvrtestings zu tun hat - wenn ich so ein bisschen quer lese, könnt das sein...

RHS schreibt gerade hier im xbmc-forum:

Zitat

mit den changsets 29147, 29148 u. 29168 aus dem Trunk lässt sich VDPAU auch wieder für SD Inhalte mit temporal/spartial Deinterlace nutzen. PVR-testing2 mit diesen changesets funzt bei mir mit VDPAU super

steffen_b · 11. April 2010

Glauben ist nicht wissen , und ohne Tests keine Erkenntnis. Das aktuelle pvr-testing2 braucht kein streamdev

pacha_muc · 11. April 2010

ok, also ich werd nun mal das plugin deinstallieren, zur sicherheit ein reboot und dann schau ma mal...

... und dann sofort rapportieren!

steffen_b · 11. April 2010

disablen über die order.conf reicht aus zum testen.

pacha_muc · 13. April 2010

also ich hab jetzt zwei tage dran rumgebastelt - schlussendlich alles total "verbastelt" dann sicherheitshalber dann doch wieder von vorne angefangen:

- ne 01.1 draufgespielt, wieder alle updates etc eingespielt etc. etc. - nun hab ich also wieder "urzustand" ohne streamdev (hab ich in der order disabled) - aber der Fehler ist nach-wie-vor genau so da wie ich ihn anfangs beschrieben hab...

konkret: der eingestellte TV-Sender läuft, anfangs zwar ein kurzes Flackern, aber dann läuft er - ca ne halbe minute, dann wird der Bildschirm schwarz und der Ton läuft noch ca. 10 sek. - bis auch der sich verabschiedet...

Code

Apr 13 22:11:08 medienserver vdr: [1822] registered source parameters for 'I - IPTV'
Apr 13 22:11:08 medienserver vdr: [1822] new device number 10
Apr 13 22:11:08 medienserver vdr: [1822] creating IPTV device 0 (CardIndex=9)
Apr 13 22:11:08 medienserver vdr: [1872] section handler thread started (pid=1822, tid=1872)
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: extrecmenu (1.2-test1-am2b): Erweitertes Aufzeichnungs-Menü
Apr 13 22:11:08 medienserver vdr: [1822] plugin 'extrecmenu' called obsolete function RegisterI18n()
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: femon (1.7.7): DVB Signal Informationsanzeige (OSD)
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: wirbelscan (0.0.5-pre11e): DVB and pvrinput channel scan for VDR
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: live (0.2.0): Live Interactive VDR Environment
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: suspendoutput (1.0.1): Suspend output
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: avolctl (0.3b): Alsa Volume Control
Apr 13 22:11:08 medienserver vdr: [1822] plugin 'avolctl' called obsolete function RegisterI18n()
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: epgsearchonly (0.0.1): Direkter Zugriff auf epgsearch's Suchenmenu
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: menuorg (0.4.4): Reorganisiert das Haupmenü
Apr 13 22:11:08 medienserver vdr: [1822] loading menuorg config file from /var/lib/vdr/plugins/menuorg.xml
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: quickepgsearch (0.0.1): Schnelle Suche nach Sendungen
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: epgsearch (0.9.25.beta16): Suche im EPG nach Wiederholungen und anderem
Apr 13 22:11:08 medienserver vdr: [1822] initializing plugin: channellists (0.0.4): Verwalte deine Kanallisten
Apr 13 22:11:08 medienserver vdr: [1822] setting primary device to 2
Apr 13 22:11:08 medienserver vdr: [1822] assuming manual start of VDR
Apr 13 22:11:08 medienserver vdr: [1822] SVDRP listening on port 2001
Apr 13 22:11:08 medienserver vdr: [1822] skin "PearlHD" not available - using "classic" instead
Apr 13 22:11:08 medienserver vdr: [1822] loading /var/lib/vdr/themes/classic-default.theme
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: xine
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: externalplayer
Apr 13 22:11:08 medienserver vdr: [1822] plugin 'externalplayer' called obsolete function RegisterI18n()
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: text2skin
Apr 13 22:11:08 medienserver vdr: [1822] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Apr 13 22:11:08 medienserver vdr: [1822] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: conflictcheckonly
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: iptv
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: extrecmenu
Apr 13 22:11:08 medienserver vdr: [1875] extrecmenu worker thread thread started (pid=1822, tid=1875)
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: femon
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: wirbelscan
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: live
Apr 13 22:11:08 medienserver vdr: [1822] LIVE: initial file cache has 82 entries and needs 307017 bytes of data!
Apr 13 22:11:08 medienserver vdr: [1876] ERROR: /var/lib/vdr/plugins/live/live.pem: No such file or directory
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: suspendoutput
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: avolctl
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: epgsearchonly
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: menuorg
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: quickepgsearch
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: epgsearch
Apr 13 22:11:08 medienserver vdr: [1822] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Apr 13 22:11:08 medienserver vdr: [1822] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Apr 13 22:11:08 medienserver vdr: [1822] starting plugin: channellists
Apr 13 22:11:08 medienserver vdr: [1822] setting current skin to "PearlHD"
Apr 13 22:11:08 medienserver vdr: [1822] loading /var/lib/vdr/themes/PearlHD-default.theme
Apr 13 22:11:08 medienserver lircd-0.8.6[1537]: accepted new client on /var/run/lirc/lircd
Apr 13 22:11:08 medienserver lircd-0.8.6[1537]: could not get file information for /dev/lirc0
Apr 13 22:11:08 medienserver lircd-0.8.6[1537]: default_init(): No such file or directory
Apr 13 22:11:08 medienserver lircd-0.8.6[1537]: Failed to initialize hardware
Apr 13 22:11:08 medienserver vdr: [1884] EPGSearch: conflictcheck thread started (pid=1822, tid=1884)
Apr 13 22:11:08 medienserver vdr: [1886] LIRC remote control thread started (pid=1822, tid=1886)
Apr 13 22:11:08 medienserver vdr: [1822] ERROR: remote control XineRemote not ready!
Apr 13 22:11:08 medienserver vdr: [1822] remote control LIRC - learning keys
Apr 13 22:11:08 medienserver vdr: [1887] Text2Skin: menu display update thread started (pid=1822, tid=1887)
Apr 13 22:11:10 medienserver lircd-0.8.6[1537]: accepted new client on /var/run/lirc/lircd
Apr 13 22:11:10 medienserver lircd-0.8.6[1537]: removed client
Apr 13 22:11:18 medienserver vdr: [1887] Text2Skin: menu display update thread ended (pid=1822, tid=1887)
Apr 13 22:11:18 medienserver vdr: [1822] switching to channel 10
Apr 13 22:11:18 medienserver vdr: [1911] receiver on device 1 thread started (pid=1822, tid=1911)
Apr 13 22:11:18 medienserver vdr: [1912] TS buffer on device 1 thread started (pid=1822, tid=1912)
Apr 13 22:11:18 medienserver vdr: [1822] setting watchdog timer to 60 seconds
Apr 13 22:11:18 medienserver vdr: [1822] OSD size changed to 1920x1080 @ 0.75
Apr 13 22:11:18 medienserver vdr: [1913] Text2Skin: channelInfo display update thread started (pid=1822, tid=1913)
Apr 13 22:11:18 medienserver vdr: [1911] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:11:18 medienserver vdr: [1911] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:11:19 medienserver vdr: [1884] EPGSearch: timer conflict check started
Apr 13 22:11:19 medienserver vdr: [1884] EPGSearch: timer conflict check finished
Apr 13 22:11:19 medienserver vdr: [1870] changing pids of channel 8 from 767+767=2:768=DEU:0:34 to 767+767=2:768=deu:0:34
Apr 13 22:11:20 medienserver vdr: [1870] changing transponder data of channel 8 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:11:20 medienserver vdr: [1870] changing transponder data of channel 9 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:11:20 medienserver vdr: [1870] changing transponder data of channel 10 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:11:20 medienserver vdr: [1870] changing transponder data of channel 11 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:11:20 medienserver vdr: [1822] retuning due to modification of channel 10
Apr 13 22:11:20 medienserver vdr: [1822] switching to channel 10
Apr 13 22:11:20 medienserver vdr: [1912] TS buffer on device 1 thread ended (pid=1822, tid=1912)
Apr 13 22:11:20 medienserver vdr: [1911] buffer stats: 55272 (2%) used
Apr 13 22:11:20 medienserver vdr: [1911] receiver on device 1 thread ended (pid=1822, tid=1911)
Apr 13 22:11:20 medienserver vdr: [1914] receiver on device 1 thread started (pid=1822, tid=1914)
Apr 13 22:11:20 medienserver vdr: [1915] TS buffer on device 1 thread started (pid=1822, tid=1915)
Apr 13 22:11:20 medienserver vdr: [1914] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:11:20 medienserver vdr: [1914] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:11:20 medienserver vdr: [1914] TS continuity error (4)
Apr 13 22:11:20 medienserver vdr: [1914] TS continuity error (11)
Apr 13 22:11:22 medienserver vdr: [1870] changing pids of channel 9 from 1023+1023=2:1024=GER:0:35 to 1023+1023=2:1024=deu:0:35
Apr 13 22:11:22 medienserver vdr: [1870] changing pids of channel 10 from 511+511=2:512=DEU:0:33 to 511+511=2:512=deu:0:33
Apr 13 22:11:23 medienserver vdr: [1913] Text2Skin: channelInfo display update thread ended (pid=1822, tid=1913)
Apr 13 22:11:24 medienserver vdr: [1822] max. latency time 1 seconds
Apr 13 22:11:44 medienserver kernel: [   61.287611] NVRM: Xid (0003:00): 6, PE0003 
Apr 13 22:11:56 medienserver init: tty1 main process (1840) terminated with status 1
Apr 13 22:11:56 medienserver init: tty1 main process ended, respawning
Apr 13 22:12:26 medienserver kernel: [  103.462110] NVRM: Xid (0003:00): 6, PE0003 
Apr 13 22:12:29 medienserver kernel: [  106.909061] NVRM: Xid (0003:00): 6, PE0003 
Apr 13 22:12:59 medienserver vdr: [1915] buffer usage: 70% (tid=1914)
Apr 13 22:13:00 medienserver vdr: [1915] buffer usage: 80% (tid=1914)
Apr 13 22:13:00 medienserver vdr: [1915] buffer usage: 90% (tid=1914)
Apr 13 22:13:01 medienserver vdr: [1915] buffer usage: 100% (tid=1914)

Alles anzeigen

System lässt sich noch ansprechen, nur der vdr ist stumm und hat keine anzeige mehr...

pacha_muc · 13. April 2010

ähm... was mir gerade noch aufgefallen ist, es funktioniert nach dem Hochfahren auch nicht mehr iptv - also der allererste Kanal von 3SAT - Kanal nicht verfügbar...

hier der aktuelle Log:

Kanal 1 ist iptv 3Sat
Kanal 4 ist ZDF via DVB-T

Code

Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: text2skin
Apr 13 22:26:04 medienserver vdr: [1829] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Apr 13 22:26:04 medienserver vdr: [1829] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: conflictcheckonly
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: iptv
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: extrecmenu
Apr 13 22:26:04 medienserver vdr: [1852] extrecmenu worker thread thread started (pid=1829, tid=1852)
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: femon
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: wirbelscan
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: live
Apr 13 22:26:04 medienserver vdr: [1829] LIVE: initial file cache has 82 entries and needs 307017 bytes of data!
Apr 13 22:26:04 medienserver vdr: [1853] ERROR: /var/lib/vdr/plugins/live/live.pem: No such file or directory
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: suspendoutput
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: avolctl
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: epgsearchonly
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: menuorg
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: quickepgsearch
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: epgsearch
Apr 13 22:26:04 medienserver vdr: [1829] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Apr 13 22:26:04 medienserver vdr: [1829] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Apr 13 22:26:04 medienserver vdr: [1862] EPGSearch: conflictcheck thread started (pid=1829, tid=1862)
Apr 13 22:26:04 medienserver vdr: [1829] starting plugin: channellists
Apr 13 22:26:04 medienserver vdr: [1829] setting current skin to "PearlHD"
Apr 13 22:26:04 medienserver vdr: [1829] loading /var/lib/vdr/themes/PearlHD-default.theme
Apr 13 22:26:04 medienserver lircd-0.8.6[1590]: accepted new client on /var/run/lirc/lircd
Apr 13 22:26:04 medienserver lircd-0.8.6[1590]: could not get file information for /dev/lirc0
Apr 13 22:26:04 medienserver lircd-0.8.6[1590]: default_init(): No such file or directory
Apr 13 22:26:04 medienserver lircd-0.8.6[1590]: Failed to initialize hardware
Apr 13 22:26:04 medienserver vdr: [1863] LIRC remote control thread started (pid=1829, tid=1863)
Apr 13 22:26:04 medienserver vdr: [1829] ERROR: remote control XineRemote not ready!
Apr 13 22:26:04 medienserver vdr: [1829] remote control LIRC - learning keys
Apr 13 22:26:04 medienserver vdr: [1864] Text2Skin: menu display update thread started (pid=1829, tid=1864)
Apr 13 22:26:06 medienserver lircd-0.8.6[1590]: accepted new client on /var/run/lirc/lircd
Apr 13 22:26:06 medienserver lircd-0.8.6[1590]: removed client
Apr 13 22:26:14 medienserver vdr: [1864] Text2Skin: menu display update thread ended (pid=1829, tid=1864)
Apr 13 22:26:14 medienserver vdr: [1829] switching to channel 10
Apr 13 22:26:14 medienserver vdr: [1888] receiver on device 1 thread started (pid=1829, tid=1888)
Apr 13 22:26:14 medienserver vdr: [1889] TS buffer on device 1 thread started (pid=1829, tid=1889)
Apr 13 22:26:14 medienserver vdr: [1829] setting watchdog timer to 60 seconds
Apr 13 22:26:14 medienserver vdr: [1829] OSD size changed to 1920x1080 @ 0.75
Apr 13 22:26:14 medienserver vdr: [1890] Text2Skin: channelInfo display update thread started (pid=1829, tid=1890)
Apr 13 22:26:14 medienserver vdr: [1888] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:26:14 medienserver vdr: [1888] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:26:15 medienserver vdr: [1862] EPGSearch: timer conflict check started
Apr 13 22:26:15 medienserver vdr: [1862] EPGSearch: timer conflict check finished
Apr 13 22:26:15 medienserver vdr: [1847] changing pids of channel 8 from 767+767=2:768=DEU:0:34 to 767+767=2:768=deu:0:34
Apr 13 22:26:15 medienserver vdr: [1847] changing transponder data of channel 8 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:26:15 medienserver vdr: [1847] changing transponder data of channel 9 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:26:15 medienserver vdr: [1847] changing transponder data of channel 10 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:26:15 medienserver vdr: [1847] changing transponder data of channel 11 from 690000:I999B8C23D0M16T8G4Y0:T to 690000000:B8C23D12G4M16T8Y0:T
Apr 13 22:26:15 medienserver vdr: [1829] retuning due to modification of channel 10
Apr 13 22:26:15 medienserver vdr: [1829] switching to channel 10
Apr 13 22:26:16 medienserver vdr: [1889] TS buffer on device 1 thread ended (pid=1829, tid=1889)
Apr 13 22:26:16 medienserver vdr: [1888] buffer stats: 39856 (1%) used
Apr 13 22:26:16 medienserver vdr: [1888] receiver on device 1 thread ended (pid=1829, tid=1888)
Apr 13 22:26:16 medienserver vdr: [1891] receiver on device 1 thread started (pid=1829, tid=1891)
Apr 13 22:26:16 medienserver vdr: [1892] TS buffer on device 1 thread started (pid=1829, tid=1892)
Apr 13 22:26:16 medienserver vdr: [1891] TS continuity error (2)
Apr 13 22:26:16 medienserver vdr: [1891] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:26:16 medienserver vdr: [1891] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:26:17 medienserver vdr: [1847] changing pids of channel 9 from 1023+1023=2:1024=GER:0:35 to 1023+1023=2:1024=deu:0:35
Apr 13 22:26:18 medienserver vdr: [1847] changing pids of channel 10 from 511+511=2:512=DEU:0:33 to 511+511=2:512=deu:0:33
Apr 13 22:26:19 medienserver vdr: [1890] Text2Skin: channelInfo display update thread ended (pid=1829, tid=1890)
Apr 13 22:26:19 medienserver vdr: [1893] Text2Skin: menu display update thread started (pid=1829, tid=1893)
Apr 13 22:26:20 medienserver vdr: [1829] max. latency time 1 seconds
Apr 13 22:26:28 medienserver vdr: [1829] switching to channel 1
Apr 13 22:26:28 medienserver vdr: [1829] cTS2PES got 0 TS errors, 1 TS continuity errors
Apr 13 22:26:28 medienserver vdr: [1829] info: Kanal nicht verfügbar!
Apr 13 22:26:28 medienserver vdr: [1892] TS buffer on device 1 thread ended (pid=1829, tid=1892)
Apr 13 22:26:28 medienserver vdr: [1891] buffer stats: 584116 (27%) used
Apr 13 22:26:28 medienserver vdr: [1891] receiver on device 1 thread ended (pid=1829, tid=1891)
Apr 13 22:26:30 medienserver vdr: [1829] max. latency time 3 seconds
Apr 13 22:26:51 medienserver init: tty1 main process (1700) terminated with status 1
Apr 13 22:26:51 medienserver init: tty1 main process ended, respawning
Apr 13 22:26:59 medienserver vdr: [1829] switching to channel 4
Apr 13 22:26:59 medienserver vdr: [1896] receiver on device 1 thread started (pid=1829, tid=1896)
Apr 13 22:26:59 medienserver vdr: [1897] TS buffer on device 1 thread started (pid=1829, tid=1897)
Apr 13 22:26:59 medienserver vdr: [1893] Text2Skin: menu display update thread ended (pid=1829, tid=1893)
Apr 13 22:26:59 medienserver vdr: [1898] Text2Skin: channelInfo display update thread started (pid=1829, tid=1898)
Apr 13 22:26:59 medienserver vdr: [1896] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:26:59 medienserver vdr: [1896] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:27:04 medienserver vdr: [1898] Text2Skin: channelInfo display update thread ended (pid=1829, tid=1898)
Apr 13 22:27:14 medienserver vdr: [1847] changing transponder data of channel 4 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 13 22:27:14 medienserver vdr: [1847] changing transponder data of channel 5 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 13 22:27:14 medienserver vdr: [1847] changing transponder data of channel 6 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 13 22:27:14 medienserver vdr: [1847] changing transponder data of channel 7 from 586000:I999B8C23D0M16T8G4Y0:T to 586000000:B8C23D12G4M16T8Y0:T
Apr 13 22:27:15 medienserver vdr: [1829] retuning due to modification of channel 4
Apr 13 22:27:15 medienserver vdr: [1829] switching to channel 4
Apr 13 22:27:15 medienserver vdr: [1897] TS buffer on device 1 thread ended (pid=1829, tid=1897)
Apr 13 22:27:15 medienserver vdr: [1896] buffer stats: 142880 (6%) used
Apr 13 22:27:15 medienserver vdr: [1896] receiver on device 1 thread ended (pid=1829, tid=1896)
Apr 13 22:27:15 medienserver vdr: [1899] receiver on device 1 thread started (pid=1829, tid=1899)
Apr 13 22:27:15 medienserver vdr: [1900] TS buffer on device 1 thread started (pid=1829, tid=1900)
Apr 13 22:27:16 medienserver vdr: [1899] cVideoRepacker: switching to MPEG1/2 mode
Apr 13 22:27:16 medienserver vdr: [1899] cVideoRepacker: operating in MPEG1/2 mode
Apr 13 22:27:30 medienserver kernel: [  111.271209] NVRM: Xid (0003:00): 6, PE0003 
Apr 13 22:27:51 medienserver vdr: [1900] buffer usage: 70% (tid=1899)
Apr 13 22:27:51 medienserver vdr: [1900] buffer usage: 80% (tid=1899)
Apr 13 22:27:51 medienserver vdr: [1900] buffer usage: 90% (tid=1899)
Apr 13 22:27:52 medienserver vdr: [1900] buffer usage: 100% (tid=1899)

Alles anzeigen

pacha_muc · 14. April 2010

guten morgen,

der frühe vogel fängt den wurm (oder so...) - deshalb hab ich jetzt mal das Frontend auf sxfe umgeschaltet... - der Fehler bleibt, nur der Log ändert sich... - vielleicht sagt er hier einem, der nicht dieses Halbwissen wie ich hat, mehr...

Code

Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: conflictcheckonly
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: iptv
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: extrecmenu
Apr 14 06:01:59 medienserver vdr: [1880] extrecmenu worker thread thread started (pid=1869, tid=1880)
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: femon
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: wirbelscan
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: live
Apr 14 06:01:59 medienserver vdr: [1869] LIVE: initial file cache has 82 entries and needs 307017 bytes of data!
Apr 14 06:01:59 medienserver vdr: [1881] ERROR: /var/lib/vdr/plugins/live/live.pem: No such file or directory
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: suspendoutput
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: avolctl
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: epgsearchonly
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: menuorg
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: quickepgsearch
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: epgsearch
Apr 14 06:01:59 medienserver vdr: [1869] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Apr 14 06:01:59 medienserver vdr: [1869] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Apr 14 06:01:59 medienserver vdr: [1890] EPGSearch: conflictcheck thread started (pid=1869, tid=1890)
Apr 14 06:01:59 medienserver vdr: [1869] starting plugin: channellists
Apr 14 06:01:59 medienserver vdr: [1877] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Apr 14 06:01:59 medienserver vdr: [1869] setting current skin to "PearlHD"
Apr 14 06:01:59 medienserver vdr: [1869] loading /var/lib/vdr/themes/PearlHD-default.theme
Apr 14 06:01:59 medienserver vdr: [1891] LIRC remote control thread started (pid=1869, tid=1891)
Apr 14 06:01:59 medienserver vdr: [1869] remote control LIRC - learning keys
Apr 14 06:01:59 medienserver lircd-0.8.6[1715]: accepted new client on /var/run/lirc/lircd
Apr 14 06:01:59 medienserver lircd-0.8.6[1715]: could not get file information for /dev/lirc0
Apr 14 06:01:59 medienserver lircd-0.8.6[1715]: default_init(): No such file or directory
Apr 14 06:01:59 medienserver lircd-0.8.6[1715]: Failed to initialize hardware
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] Client connection 0 closed
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] Closing connection 0
Apr 14 06:01:59 medienserver vdr: [1892] Text2Skin: menu display update thread started (pid=1869, tid=1892)
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [vdr-fe]    Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [vdr-fe]       (ERROR (tools/gnome_screensaver.c,61): Resource temporarily unavailable)
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] Client 0 connected: 127.0.0.1:45003
Apr 14 06:01:59 medienserver vdr: [1877] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] Server greeting: VDR-1.7.14 xineliboutput-1.0.90-cvs READY
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] Trying PIPE connection ...
Apr 14 06:01:59 medienserver vdr: [1877] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1869
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1869/pipe.0
Apr 14 06:01:59 medienserver vdr: [1877] removing /var/lib/vdr/plugins/xineliboutput/pipes.1869
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] cTcpWriter initialized (buffer 512 kb)
Apr 14 06:01:59 medienserver vdr: [1877] [xine..put] Pipe open
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] Data stream connected (PIPE)
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1879] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1905] [vdr-fe]    read_key: read(stdin) failed: no stdin
Apr 14 06:01:59 medienserver vdr-sxfe[1879]: [1905] [vdr-fe]    Keyboard thread terminated
Apr 14 06:02:08 medienserver vdr-sxfe[1879]: [1904] [input_vdr] No data in 8 seconds, queuing no signal image
Apr 14 06:02:08 medienserver vdr-sxfe[1879]: [1904] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:02:09 medienserver vdr: [1892] Text2Skin: menu display update thread ended (pid=1869, tid=1892)
Apr 14 06:02:09 medienserver vdr: [1869] switching to channel 10
Apr 14 06:02:09 medienserver vdr: [1914] receiver on device 1 thread started (pid=1869, tid=1914)
Apr 14 06:02:09 medienserver vdr: [1915] TS buffer on device 1 thread started (pid=1869, tid=1915)
Apr 14 06:02:09 medienserver vdr-sxfe[1879]: [1903] [input_vdr] SCR: reset scr tuning by set_live_mode
Apr 14 06:02:09 medienserver vdr: [1869] setting watchdog timer to 60 seconds
Apr 14 06:02:09 medienserver vdr: [1869] OSD size changed to 1920x1080 @ 1
Apr 14 06:02:09 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:02:09 medienserver vdr-sxfe[1879]: [1904] [demux_vdr] PMT changed
Apr 14 06:02:09 medienserver vdr: [1916] Text2Skin: channelInfo display update thread started (pid=1869, tid=1916)
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  0% (  1/239)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  4% ( 11/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr: [1914] [xine..put] Detected video size 720x576
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 11% ( 27/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 18% ( 44/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr: [1890] EPGSearch: timer conflict check started
Apr 14 06:02:10 medienserver vdr: [1890] EPGSearch: timer conflict check finished
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 26% ( 62/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 33% ( 79/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 40% ( 96/238)   SCR PAUSED frames 0
Apr 14 06:02:10 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 47% (112/238)   SCR PAUSED frames 0
Apr 14 06:02:11 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 54% (129/238)   SCR PAUSED frames 0
Apr 14 06:02:11 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 60% (144/238)   SCR PAUSED frames 0
Apr 14 06:02:11 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: SCR tuning resetted by adjust_speed, I 0 B 0 P 0
Apr 14 06:02:14 medienserver vdr: [1916] Text2Skin: channelInfo display update thread ended (pid=1869, tid=1916)
Apr 14 06:02:15 medienserver vdr: [1869] max. latency time 1 seconds
Apr 14 06:02:23 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer 50% (119/238)       SCR +0 frames 0
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (19)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (16)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (14)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (11)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (9)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: adjust_speed: no pause, enough vbufs queued (6)
Apr 14 06:02:33 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: SCR paused by adjust_speed, vbufs = 4
Apr 14 06:02:34 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  0% (  0/239)   SCR PAUSED frames 0
Apr 14 06:02:41 medienserver vdr-sxfe[1879]: last message repeated 3 times
Apr 14 06:02:41 medienserver vdr-sxfe[1879]: [1904] [input_vdr] No data in 8 seconds, queuing no signal image
Apr 14 06:02:41 medienserver vdr-sxfe[1879]: [1904] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:02:42 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  2% (  5/238)   SCR PAUSED frames 0
Apr 14 06:02:42 medienserver init: tty1 main process (1589) terminated with status 1
Apr 14 06:02:42 medienserver init: tty1 main process ended, respawning
Apr 14 06:02:44 medienserver vdr-sxfe[1879]: [1904] [input_vdr] SCR: Buffer  2% (  5/238)   SCR PAUSED frames 0
Apr 14 06:03:16 medienserver vdr-sxfe[1879]: last message repeated 16 times
Apr 14 06:04:18 medienserver vdr-sxfe[1879]: last message repeated 32 times
Apr 14 06:05:20 medienserver vdr-sxfe[1879]: last message repeated 31 times

Alles anzeigen

wenn ich dann im webconfig das vdr-backend neu starte erhalte ich zwar zumindest das OSD aber keine Kanäle mehr... ich hab in folgendem Log mal von Kanal 10 auf 4 umgeschaltet...

Code

Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: femon
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: wirbelscan
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: live
Apr 14 06:09:28 medienserver vdr: [2082] LIVE: initial file cache has 82 entries and needs 307017 bytes of data!
Apr 14 06:09:28 medienserver vdr: [2091] ERROR: /var/lib/vdr/plugins/live/live.pem: No such file or directory
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: suspendoutput
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: avolctl
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: epgsearchonly
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: menuorg
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: quickepgsearch
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: epgsearch
Apr 14 06:09:28 medienserver vdr: [2082] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Apr 14 06:09:28 medienserver vdr: [2082] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Apr 14 06:09:28 medienserver vdr: [2100] EPGSearch: conflictcheck thread started (pid=2082, tid=2100)
Apr 14 06:09:28 medienserver vdr: [2082] starting plugin: channellists
Apr 14 06:09:28 medienserver vdr: [2082] setting current skin to "PearlHD"
Apr 14 06:09:28 medienserver vdr: [2082] loading /var/lib/vdr/themes/PearlHD-default.theme
Apr 14 06:09:28 medienserver vdr: [2101] LIRC remote control thread started (pid=2082, tid=2101)
Apr 14 06:09:28 medienserver lircd-0.8.6[1715]: accepted new client on /var/run/lirc/lircd
Apr 14 06:09:28 medienserver lircd-0.8.6[1715]: could not get file information for /dev/lirc0
Apr 14 06:09:28 medienserver lircd-0.8.6[1715]: default_init(): No such file or directory
Apr 14 06:09:28 medienserver lircd-0.8.6[1715]: Failed to initialize hardware
Apr 14 06:09:28 medienserver vdr: [2082] remote control LIRC - learning keys
Apr 14 06:09:28 medienserver vdr: [2102] Text2Skin: menu display update thread started (pid=2082, tid=2102)
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Client 0 connected: 127.0.0.1:43399
Apr 14 06:09:29 medienserver vdr: [2089] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Client connection 0 closed
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Closing connection 0
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [vdr-fe]    Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [vdr-fe]       (ERROR (tools/gnome_screensaver.c,61): Resource temporarily unavailable)
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Client 0 connected: 127.0.0.1:43400
Apr 14 06:09:29 medienserver vdr: [2089] loading /var/lib/vdr/plugins/xineliboutput/allowed_hosts.conf
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] Server greeting: VDR-1.7.14 xineliboutput-1.0.90-cvs READY
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Trying PIPE connection ...
Apr 14 06:09:29 medienserver vdr: [2089] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.2082
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.2082/pipe.0
Apr 14 06:09:29 medienserver vdr: [2089] removing /var/lib/vdr/plugins/xineliboutput/pipes.2082
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] cTcpWriter initialized (buffer 512 kb)
Apr 14 06:09:29 medienserver vdr: [2089] [xine..put] Pipe open
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] Data stream connected (PIPE)
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2104] [demux_vdr] Using decoder "FFmpeg" for H.264 video
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2117] [vdr-fe]    read_key: read(stdin) failed: no stdin
Apr 14 06:09:29 medienserver vdr-sxfe[2104]: [2117] [vdr-fe]    Keyboard thread terminated
Apr 14 06:09:37 medienserver vdr-sxfe[2104]: [2116] [input_vdr] No data in 8 seconds, queuing no signal image
Apr 14 06:09:37 medienserver vdr-sxfe[2104]: [2116] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:09:38 medienserver vdr: [2102] Text2Skin: menu display update thread ended (pid=2082, tid=2102)
Apr 14 06:09:38 medienserver vdr: [2082] switching to channel 10
Apr 14 06:09:38 medienserver vdr: [2123] receiver on device 1 thread started (pid=2082, tid=2123)
Apr 14 06:09:38 medienserver vdr: [2124] TS buffer on device 1 thread started (pid=2082, tid=2124)
Apr 14 06:09:38 medienserver vdr-sxfe[2104]: [2115] [input_vdr] SCR: reset scr tuning by set_live_mode
Apr 14 06:09:38 medienserver vdr: [2082] setting watchdog timer to 60 seconds
Apr 14 06:09:38 medienserver vdr: [2082] OSD size changed to 1920x1080 @ 1
Apr 14 06:09:38 medienserver vdr: [2125] Text2Skin: channelInfo display update thread started (pid=2082, tid=2125)
Apr 14 06:09:38 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:09:38 medienserver vdr-sxfe[2104]: [2116] [demux_vdr] PMT changed
Apr 14 06:09:39 medienserver vdr: [2100] EPGSearch: timer conflict check started
Apr 14 06:09:39 medienserver vdr: [2100] EPGSearch: timer conflict check finished
Apr 14 06:09:40 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:09:42 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:09:43 medienserver vdr: [2125] Text2Skin: channelInfo display update thread ended (pid=2082, tid=2125)
Apr 14 06:09:44 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:09:44 medienserver vdr: [2082] max. latency time 1 seconds
Apr 14 06:09:46 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:09:47 medienserver vdr-sxfe[2104]: [2116] [input_vdr] No data in 8 seconds, queuing no signal image
Apr 14 06:09:47 medienserver vdr-sxfe[2104]: [2116] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:09:48 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  2% (  5/239)   SCR PAUSED frames 0
Apr 14 06:10:37 medienserver vdr-sxfe[2104]: last message repeated 24 times
Apr 14 06:10:37 medienserver vdr: [2128] Text2Skin: menu display update thread started (pid=2082, tid=2128)
Apr 14 06:10:38 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  2% (  5/239)   SCR PAUSED frames 0
Apr 14 06:10:44 medienserver vdr-sxfe[2104]: last message repeated 2 times
Apr 14 06:10:44 medienserver vdr: [2128] [xine..put] OSD bandwidth: 246344 bytes/s (1924 kbit/s)
Apr 14 06:10:44 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  2% (  5/239)   SCR PAUSED frames 0
Apr 14 06:10:46 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  2% (  5/239)   SCR PAUSED frames 0
Apr 14 06:10:48 medienserver vdr: [2082] switching to channel 4
Apr 14 06:10:48 medienserver vdr-sxfe[2104]: [2115] [input_vdr] vdr_flush_engine: playback is paused <0>
Apr 14 06:10:48 medienserver vdr: [2124] TS buffer on device 1 thread ended (pid=2082, tid=2124)
Apr 14 06:10:48 medienserver vdr: [2123] buffer stats: 0 (0%) used
Apr 14 06:10:48 medienserver vdr: [2123] receiver on device 1 thread ended (pid=2082, tid=2123)
Apr 14 06:10:48 medienserver vdr: [2129] receiver on device 1 thread started (pid=2082, tid=2129)
Apr 14 06:10:48 medienserver vdr: [2130] TS buffer on device 1 thread started (pid=2082, tid=2130)
Apr 14 06:10:48 medienserver vdr: [2128] Text2Skin: menu display update thread ended (pid=2082, tid=2128)
Apr 14 06:10:48 medienserver vdr: [2131] Text2Skin: channelInfo display update thread started (pid=2082, tid=2131)
Apr 14 06:10:48 medienserver vdr-sxfe[2104]: [2115] [input_vdr] SCR: reset scr tuning by set_live_mode
Apr 14 06:10:48 medienserver vdr-sxfe[2104]: [2116] [demux_vdr] PMT changed
Apr 14 06:10:48 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:10:53 medienserver vdr-sxfe[2104]: last message repeated 2 times
Apr 14 06:10:53 medienserver vdr: [2131] Text2Skin: channelInfo display update thread ended (pid=2082, tid=2131)
Apr 14 06:10:54 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  0% (  0/240)   SCR PAUSED frames 0
Apr 14 06:10:56 medienserver vdr-sxfe[2104]: [2116] [input_vdr] No data in 8 seconds, queuing no signal image
Apr 14 06:10:56 medienserver vdr-sxfe[2104]: [2116] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
Apr 14 06:10:56 medienserver vdr-sxfe[2104]: [2116] [input_vdr] SCR: Buffer  2% (  5/239)   SCR PAUSED frames 0
Apr 14 06:11:58 medienserver vdr-sxfe[2104]: last message repeated 31 times
Apr 14 06:12:59 medienserver vdr-sxfe[2104]: last message repeated 30 times

Alles anzeigen

BlueVIP · 14. April 2010

Mal eine ganz unbedarfte Frage (weil ich auch nur über Halbwissen verfüge Welche DVB-T-Karte wird denn verwendet? Könnte evtl. ein Treiberproblem vorliegen? Es wird ja scheinbar nicht die Hardware aus deiner Sig. verwendet, oder?
Frage nur deshalb, weil ich früher teils große Probleme bei schlechtem Empfang hatte. Und ich könnte mir vorstellen, dass das "Ton-nach-laufen" am Buffer liegt.

pacha_muc · 14. April 2010

also hier in dem oben beschriebenen Testsystem ist derzeit eine Hauppage DVB-T Karte drin, und die läuft auf der 0.1.1 nach den updates / upgrates absolut ohne Probleme... - diese tauchen erst nach dem Wechsel auf 1.7.14 auf...

pacha_muc · 15. April 2010

also hab testweise ne pinnacle dvb-t karte eingesteckt, gleiche symthome, gleiches verhalten, also daran liegts nicht...

tv läuft ein paar sec - und dann bekomm ich keine Kanäle mehr...

Jetzt mitmachen!

Teilen