Sky Sport HD ruckelt

Hi,
schon mal versucht das deinterlacing abzuschalten? ARD und ZDF senden in 720p aber soweit ich weiß sendet SKY in 1080i. Vielleicht schafft da Dein System das deinterlacing nicht.

Gruß Darkstar.

Ich habe im Prinzip dieselben Probleme, immer wieder Miniruckler bei Sky Sport HD.
Am Deinterlacing liegts nicht, auch wenns abgeschaltet ist ruckelts.

Mahlzeit,

das dürfte alles eine Sache der Einstellungen in der zugehörigen .config zu xine sein.

Entsprechende logfiles wären halt mal angesagt, mit aussagekräftigen Signaturen.

Das Deinterlacing an sich spielt hier keine Rolle, soweit man die .config auf die zur Verfügung stehende Hardware anpasst.

Das Deinterlacing abschalten ist kein Weg das Problemchen in den Griff zu bekommen, denn dann sieht das Bild grausam aus.

Gruß
Wolfgang

Hi,
anbei mal ein xine log. Problem ist offensichtlich, dass xine Bilder verwirft.

Die in meinen Augen wichtigsten Einstellungen aus der xine config:

engine.buffers.video_num_buffers:1700
media.xvdr.num_buffers_hd:2500
video.output.vdpau_deinterlace_method:bob[/CODE]

System ist ein POV ION mit 2GB Ram.
Es wird Ubuntu Karmic und die Pakete vom "the-vdr team" (1.7.10).

Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6cvs.
(c) 2000-2007 Das xine Team.
Kompiliert mit xine Bibliothek 1.1.90 (1.1.90hg)
xine Bibliothek, Version 1.1.90 (1.1.90hg) gefunden.
...
vo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library  195.30  Fri Dec 18 14:22:27 PST 2009
video_out: thread created
audio_alsa_out : Unterstºtzte Modi sind 16Bit Stereo (4-Kanal nicht aktiviert in xine Konfiguration) (4.1-Kanal nicht aktiviert in xine Konfiguration) (5-Kanal nicht aktiviert in xine Konfiguration) (5.1-Kanal nicht aktiviert in xine Konfiguration) (a/52 und DTS pass-through nicht aktiviert in xine Konfiguration)
audio_out: thread created
xine_stream_new
video_out: thread created
audio_out: thread created
osd: error loading font sans with in XDG data directories.
osd: error loading font sans with in XDG data directories.
osd: error loading font sans with in XDG data directories.
xine_interface: unknown or deprecated stream param 10 set
xine_stream_new
xine_interface: unknown or deprecated stream param 10 set
xine_stream_new
xine_interface: unknown or deprecated stream param 10 set
vdpau_set_property: property=1, value=3
gnome_vfs init_input_class
gnome-vfs not initialised
init class succeeded
params.c:OpenConfFile() - Unable to open configuration file "/root/.smb/smb.conf":
	No such file or directory
params.c:OpenConfFile() - Unable to open configuration file "/root/.smb/smb.conf.append":
	No such file or directory
Using netbios name VDR.
Using workgroup WORKGROUP.
vdpau_set_property: property=2, value=-314
vo_vdpau: vdpau_update_csc: hue=-3,140000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=2, value=0
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=5, value=-100
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=-1,000000, color_standard=0
vdpau_set_property: property=5, value=0
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=3, value=900
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=9,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=3, value=100
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=4, value=900
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=9,000000, brightness=0,000000, color_standard=0
vdpau_set_property: property=4, value=100
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
gui_xine_open_and_play():
	mrl: 'netvdr://localhost#demux:mpeg_pes',
	sub 'NONE',
	start_pos 0, start_time 0, av_offset 0, spu_offset 0.
gnome_vfs init_input_class
gnome-vfs not initialised
xine: Inputplugin gefunden: VDR display device plugin
input_vdr: connecting to vdr.
input_vdr: socket opening (port 18701) successful, fd = 14
input_vdr: socket opening (port 18702) successful, fd = 15
input_vdr: socket opening (port 18703) successful, fd = 16
input_vdr: socket opening (port 18704) successful, fd = 17
input_vdr: connecting to all sockets (port 18701 .. 18704) was successful.
vdpau_set_property: property=8, value=100
vdpau_set_property: property=13, value=100
prebuffer=0 pts
ao_flush (loop running: 1)
video discontinuity #1, type is 0, disc_off 0
waiting for audio discontinuity #1
audio discontinuity #1, type is 0, disc_off 0
waiting for in_discontinuity update #1
current time : 43540
vpts adjusted with prebuffer to 43540
ao_flush (loop running: 1)
video discontinuity #2, type is 0, disc_off 0
waiting for audio discontinuity #2
audio discontinuity #2, type is 0, disc_off 0
waiting for in_discontinuity update #2
current time : 43633
vpts adjusted with prebuffer to 43633
xine: Demultiplexer-Plugin gefunden: mpeg pes demux plugin
video discontinuity #3, type is 0, disc_off 0
waiting for audio discontinuity #3
audio discontinuity #3, type is 0, disc_off 0
waiting for in_discontinuity update #3
current time : 43704
vpts adjusted with prebuffer to 43704
load_plugins: plugin dxr3-mpeg2 failed to instantiate itself.
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal_spatial
vdpau_set_property: property=0, value=0
vo_vdpau: deinterlace: none
load_plugins: plugin vdpau_mpeg12 will be used for video streamtype 00.
av_offset=0 pts
spu_offset=0 pts
xine_play
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal_spatial
vdr_video: osd: (0, 0)-(720, 576)@1,77778
vdr_video: osd: (0, 0)-(720, 576)@1,77778
vdpau_set_property: property=8, value=100
vdpau_set_property: property=13, value=100
vdpau_set_property: property=8, value=100
vdpau_set_property: property=13, value=100
vo_vdpau: deinterlace: temporal_spatial
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=1
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=0
vo_vdpau: skip_chroma = 0
play_internal ...done
video_out: Verwerfe Bild mit pts 47304, weil es zu alt ist (Unterschied: 41618).
video_out: Verwerfe Bild mit pts 50904, weil es zu alt ist (Unterschied: 38018).
video_out: Verwerfe Bild mit pts 54504, weil es zu alt ist (Unterschied: 34418).
video_out: Verwerfe Bild mit pts 58104, weil es zu alt ist (Unterschied: 30818).
video_out: Verwerfe Bild mit pts 61704, weil es zu alt ist (Unterschied: 27218).
video_out: Verwerfe Bild mit pts 65304, weil es zu alt ist (Unterschied: 23618).
video_out: Verwerfe Bild mit pts 68904, weil es zu alt ist (Unterschied: 20018).
video_out: Verwerfe Bild mit pts 72504, weil es zu alt ist (Unterschied: 16418).
video_out: Verwerfe Bild mit pts 76104, weil es zu alt ist (Unterschied: 16842).
video_out: Verwerfe Bild mit pts 79704, weil es zu alt ist (Unterschied: 13242).
video_out: Verwerfe Bild mit pts 83304, weil es zu alt ist (Unterschied: 9642).
video_out: Verwerfe Bild mit pts 86904, weil es zu alt ist (Unterschied: 6042).
input_vdr: flush buffers (vb: 0, ab: 0, vf: 0, af: 0) done.
ao_flush (loop running: 1)
audio discontinuity #4, type is 0, disc_off 0
waiting for in_discontinuity update #4
vdpau_set_property: property=0, value=0
vo_vdpau: deinterlace: none
video discontinuity #4, type is 0, disc_off 0
current time : 136639
vpts adjusted with prebuffer to 136639
ao_flush (loop running: 1)
audio discontinuity #5, type is 0, disc_off 0
waiting for in_discontinuity update #5
video discontinuity #5, type is 0, disc_off 0
current time : 136835
vpts adjusted with prebuffer to 136835
vdpau_set_property: property=0, value=0
vo_vdpau: deinterlace: none
load_plugins: plugin vdpau_mpeg12 will be used for video streamtype 00.
video discontinuity #6, type is 2, disc_off 7424289800
waiting for audio discontinuity #6
load_plugins: plugin a/52 will be used for audio streamtype 00.
audio_alsa_out:open pause_resume=0
output sample rate 48000
audio discontinuity #6, type is 2, disc_off 7424289800
waiting for in_discontinuity update #6
current time : 166825
video vpts adjusted to audio vpts 139715
vdpau_set_property: property=0, value=0
vo_vdpau: deinterlace: none
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal_spatial
audio jump, diff=52551
set_speed 125000
vdpau_set_property: property=0, value=0
vo_vdpau: deinterlace: none
load_plugins: plugin vdpau_h264 will be used for video streamtype 4d.
buf underrun 1!!
Allocate 4 reference frames
vdpau_set_property: property=0, value=1
vo_vdpau: deinterlace: temporal_spatial
Create decoder: vdp_device: 1, profile: 8, res: 1920x1080
vdr_video: osd: (0, 0)-(1920, 1080)@1,77778
vdr_video: osd: (0, 0)-(1920, 1080)@1,77778
video jump
vdpau_set_property: property=8, value=100
vdpau_set_property: property=13, value=100
vdpau_set_property: property=8, value=100
vdpau_set_property: property=13, value=100
vo_vdpau: deinterlace: bob
vo_vdpau: set_scaling_level=0
vo_vdpau: enabled features: inverse_telecine=1
vo_vdpau: disable noise reduction.
vo_vdpau: disable sharpness.
vo_vdpau: vdpau_update_csc: hue=0,000000, saturation=1,000000, contrast=1,000000, brightness=0,000000, color_standard=1
vo_vdpau: skip_chroma = 0
set_speed 1000000
video_out: Verwerfe Bild mit pts 231515, weil es zu alt ist (Unterschied: 7).
set_speed 125000
set_speed 1000000
audio_out: inserting 14365 0-frames to fill a gap of 26941 pts
video_out: Verwerfe Bild mit pts 268597, weil es zu alt ist (Unterschied: 12956).
liba52:a52 frame failed crc16 checksum.
video_out: Verwerfe Bild mit pts 281554, weil es zu alt ist (Unterschied: 8628).
video_out: Verwerfe Bild mit pts 306863, weil es zu alt ist (Unterschied: 4410).
liba52:a52 frame failed crc16 checksum.
audio jump, diff=-167040
audio_out: inserting 89059 0-frames to fill a gap of 167027 pts
video jump
set_speed 125000
liba52:a52 frame failed crc16 checksum.
set_speed 1000000
audio jump, diff=-195840
audio_out: inserting 11152 0-frames to fill a gap of 20916 pts
audio_out: inserting 104412 0-frames to fill a gap of 195822 pts
video jump
video jump
video jump
200 Bilder angezeigt, 0 Bilder ºbersprungen, 16 Bilder verworfen

Hi,

was so als erstes auffällt:

vo_vdpau: enabled features: inverse_telecine=1

den auf

video.output.vdpau_enable_inverse_telecine:0

in der .config => gibt mehr Leistung frei auf der GPU und ist unnütz in unseren Breiten.

Deine Ruckler kommen meiner Meinung nach vom Sound her, da sich das Bild bei vdpau immer wieder mit dem Sound syncronisiert.

Sieht man hier schön:

audio_out: inserting 14365 0-frames to fill a gap of 26941 pts
video_out: Verwerfe Bild mit pts 268597, weil es zu alt ist (Unterschied: 12956).
liba52:a52 frame failed crc16 checksum.
video_out: Verwerfe Bild mit pts 281554, weil es zu alt ist (Unterschied: 8628).
video_out: Verwerfe Bild mit pts 306863, weil es zu alt ist (Unterschied: 4410).
liba52:a52 frame failed crc16 checksum.
audio jump, diff=-167040
audio_out: inserting 89059 0-frames to fill a gap of 167027 pts
video jump
set_speed 125000
liba52:a52 frame failed crc16 checksum.
set_speed 1000000
audio jump, diff=-195840
audio_out: inserting 11152 0-frames to fill a gap of 20916 pts
audio_out: inserting 104412 0-frames to fill a gap of 195822 pts
video jump
video jump
video jump

Versuch mal den Sound via Resampling ausgeben zu lassen:

...
# Methode für Audio/Videosynchronisation
# { metronom feedback resample }, default: 0
audio.synchronization.av_sync_method:resample


# Wenn !=0, immer auf diese Rate anpassen
# numeric, default: 0
audio.synchronization.force_rate:48000


# Resampling benutzen
# { auto off on }, default: 0
audio.synchronization.resample_mode:on

Mal sehen ob das hilft...

Wenn du die Ausgaben so hast, was sagt da das Log des VDR's werden da Sender neue PID's zugewiesen?

Gruß
Wolfgang

Danke für deine Antwort.

EDIT:
Läuft nun tatsächlich viel besser, allerdings ein paar Frames werden immernoch
verworfen was ganz kleine ruckler zur Folge hat.
Gibts da noch einen Tipp?

200 Bilder angezeigt, 0 Bilder übersprungen, 1 Bilder verworfen
video_out: Verwerfe Bild mit pts 15514136, weil es zu alt ist (Unterschied: 4134).
200 Bilder angezeigt, 0 Bilder übersprungen, 1 Bilder verworfen
video_out: Verwerfe Bild mit pts 17472536, weil es zu alt ist (Unterschied: 4190).
video_out: Verwerfe Bild mit pts 17587736, weil es zu alt ist (Unterschied: 3826).
video_out: Verwerfe Bild mit pts 17818136, weil es zu alt ist (Unterschied: 4196).
200 Bilder angezeigt, 0 Bilder übersprungen, 3 Bilder verworfen
video_out: Verwerfe Bild mit pts 18624536, weil es zu alt ist (Unterschied: 6016).
video_out: Verwerfe Bild mit pts 18854936, weil es zu alt ist (Unterschied: 4222).
200 Bilder angezeigt, 0 Bilder übersprungen, 2 Bilder verworfen

Bei mir auch die gleichen Probleme mit Sky Sport HD mit den Rucklern.
Wäre schön wenn es da eine Lösung gäbe.

Hi,

hatte auch die Probleme mit den Rucklern.
Konnte hier jedoch einige Tipps finden und jetzt läuft das ganze wirklich reibungslos.

Vielen Dank an alle, die hier ihre Hilfe anbieten.

manowar und achtungwild:

Bei mir mußte ich noch folgenden Eintrag in der xorg.conf zufügen, danach lief alles wie geschmiert:

Section "Extensions"
Option "Composite" "Disable"
EndSection

Vielleicht hilft es ja!

konnte mein Problem lösen,hatte Ruckler bei Sky Sport Hd und Eurosport HD.
habe video.output.vdpau_display_queue_length=4 eingestellt war vorher video.output.vdpau_display_queue_length=2
auf den andern HD Kanälen hatte ich keine Probleme,die beiden oben genannten haben auch die höchste Bitrate meißt so bei 15mbit

Hallo Achtungwild,
Vielleicht kann mir jemand helfen, bin absoluter Neuling. Aber ich habe es geschafft yavdr mit xbmc mit einer tt3650 ans laufen zu bekommen.
Es ist alles bestens, ausser Sky.
Ich bekomme es einfach nicht hin.
Habe ein Alphacrypt Light modul, die Sky Karte funktioniert in einer DBox wunderbar.
Das Modul kann auch nicht defekt sein, denn es funktioniert im Kathrein UFS822 (auch Linux) auch.

Hier mal die System-Information aus dem Webfrontend

mir sagt es leider nichts. wobei "dvb_ca adapter 0: DVB CAM detected and initialised successfully" kann doch eigentlich nicht schlecht sein, oder?

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 (Ubuntu 2.6.31-20.58-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
[ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bff90000 (usable)
[ 0.000000] modified: 00000000bff90000 - 00000000bff9e000 (ACPI data)
[ 0.000000] modified: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37903000 - 37fef6ca
[ 0.000000] Allocated new RAMDISK: 008b2000 - 00f9e6ca
[ 0.000000] Move RAMDISK from 0000000037903000 - 0000000037fef6c9 to 008b2000 - 00f9e6c9
[ 0.000000] ACPI: RSDP 000f9c80 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bff90000 0003C (v01 FOUNDR FOUNDRPC 20100126 MSFT 00000097)
[ 0.000000] ACPI: FACP bff90200 00084 (v01 FOUNDR FOUNDRPC 20100126 MSFT 00000097)
[ 0.000000] ACPI: DSDT bff905c0 04949 (v01 FOUNDR FOUNDRPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS bff9e000 00040
[ 0.000000] ACPI: APIC bff90390 0006C (v01 FOUNDR APIC1740 20100126 MSFT 00000097)
[ 0.000000] ACPI: MCFG bff90400 0003C (v01 FOUNDR OEMMCFG 20100126 MSFT 00000097)
[ 0.000000] ACPI: SLIC bff90440 00176 (v01 FOUNDR FOUNDRPC 20100126 MSFT 00000097)
[ 0.000000] ACPI: OEMB bff9e040 00076 (v01 FOUNDR OEMB1740 20100126 MSFT 00000097)
[ 0.000000] ACPI: HPET bff9a5c0 00038 (v01 FOUNDR OEMHPET 20100126 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b10db] BRK ==> [00008ae000 - 00008b10db]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008b2000 - 0000f9e6ca] NEW RAMDISK ==> [00008b2000 - 0000f9e6ca]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bff90
[ 0.000000] On node 0 totalpages: 786219
[ 0.000000] free_area_init_node: node 0, pgdat c0788900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4368 pages used for memmap
[ 0.000000] HighMem zone: 554626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2810000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780075
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-20-generic root=/dev/mapper/wohnzimmer-root ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15726400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bff90)
[ 0.000000] Memory: 3088032k/3145280k available (4578k kernel code, 56016k reserved, 2146k data, 540k init, 2235976k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB)
[ 0.000000] .data : 0xc0578948 - 0xc0791408 (2146 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0578948 (4578 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 837.310 MHz processor.
[ 0.002870] Console: colour VGA+ 80x25
[ 0.002882] console [tty0] enabled
[ 0.003319] hpet clockevent registered
[ 0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.003352] Calibrating delay loop (skipped), value calculated using timer frequency.. 1674.62 BogoMIPS (lpj=3349240)
[ 0.003419] Security Framework initialized
[ 0.003484] AppArmor: AppArmor initialized
[ 0.003512] Mount-cache hash table entries: 512
[ 0.003917] Initializing cgroup subsys ns
[ 0.003934] Initializing cgroup subsys cpuacct
[ 0.003951] Initializing cgroup subsys memory
[ 0.003973] Initializing cgroup subsys freezer
[ 0.003982] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM1)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Atom events, Intel PMU driver.
[ 0.004000] ... version: 3
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.020020] ACPI: Core revision 20090521
[ 0.044568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.087356] CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.088001] APIC calibration not consistent with PM-Timer: 98ms instead of 100ms
[ 0.088001] APIC delta adjusted to PM-Timer: 523302 (513035)
[ 0.088001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 1674.62 BogoMIPS (lpj=3349252)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.175691] CPU1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.175740] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180079] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 1674.60 BogoMIPS (lpj=3349215)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] CPU2: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.272253] CPU2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.272323] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.276374] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 1674.63 BogoMIPS (lpj=3349269)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] CPU3: Thermal monitoring enabled (TM1)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.371622] CPU3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.371692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.372041] Brought up 4 CPUs
[ 0.372053] Total of 4 processors activated (6698.48 BogoMIPS).
[ 0.372159] CPU0 attaching sched-domain:
[ 0.372172] domain 0: span 0,2 level SIBLING
[ 0.372183] groups: 0 2
[ 0.372201] domain 1: span 0-3 level CPU
[ 0.372212] groups: 0,2 1,3
[ 0.372234] CPU1 attaching sched-domain:
[ 0.372243] domain 0: span 1,3 level SIBLING
[ 0.372253] groups: 1 3
[ 0.372269] domain 1: span 0-3 level CPU
[ 0.372279] groups: 1,3 0,2
[ 0.376025] CPU2 attaching sched-domain:
[ 0.376034] domain 0: span 0,2 level SIBLING
[ 0.376044] groups: 2 0
[ 0.376060] domain 1: span 0-3 level CPU
[ 0.376070] groups: 0,2 1,3
[ 0.376088] CPU3 attaching sched-domain:
[ 0.376097] domain 0: span 1,3 level SIBLING
[ 0.376107] groups: 3 1
[ 0.376123] domain 1: span 0-3 level CPU
[ 0.376133] groups: 1,3 0,2
[ 0.376684] Booting paravirtualized kernel on bare hardware
[ 0.376883] regulator: core version 0.5
[ 0.376883] Time: 11:35:11 Date: 05/19/10
[ 0.376883] NET: Registered protocol family 16
[ 0.376883] EISA bus registered
[ 0.376883] ACPI: bus type pci registered
[ 0.377021] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.377035] PCI: Not using MMCONFIG.
[ 0.377415] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.377425] PCI: Using configuration type 1 for base access
[ 0.384082] bio: create slab <bio-0> at 0
[ 0.388017] ACPI: EC: Look up EC in DSDT
[ 0.416548] ACPI: Interpreter enabled
[ 0.416568] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.416668] ACPI: Using IOAPIC for interrupt routing
[ 0.416839] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.430782] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.430794] PCI: Using MMCONFIG for extended config space
[ 0.460131] ACPI Warning: Incorrect checksum in table [OEMB] - 07, should be 00 20090521 tbutils-246
[ 0.460570] ACPI: No dock devices found.
[ 0.461136] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.461458] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfcefc000-0xfcefffff]
[ 0.461541] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.461555] pci 0000:00:1b.0: PME# disabled
[ 0.461669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.461682] pci 0000:00:1c.0: PME# disabled
[ 0.461797] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.461810] pci 0000:00:1c.1: PME# disabled
[ 0.461906] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[ 0.462000] pci 0000:00:1d.1: reg 20 io port: [0xc880-0xc89f]
[ 0.462094] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
[ 0.462188] pci 0000:00:1d.3: reg 20 io port: [0xc480-0xc49f]
[ 0.462289] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfcefbc00-0xfcefbfff]
[ 0.462377] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.462390] pci 0000:00:1d.7: PME# disabled
[ 0.462666] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.462690] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.462710] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.462727] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.462745] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f]
[ 0.462763] pci 0000:00:1f.2: reg 24 32bit mmio: [0x00fc00-0x00ffff]
[ 0.462808] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.462820] pci 0000:00:1f.2: PME# disabled
[ 0.462902] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.463030] pci 0000:01:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.463068] pci 0000:01:00.0: reg 18 64bit mmio: [0xcdfff000-0xcdffffff]
[ 0.463097] pci 0000:01:00.0: reg 20 64bit mmio: [0xcdff8000-0xcdffbfff]
[ 0.463118] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.463184] pci 0000:01:00.0: supports D1 D2
[ 0.463194] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.463208] pci 0000:01:00.0: PME# disabled
[ 0.463311] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.463325] pci 0000:00:1c.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff]
[ 0.463344] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcdf00000-0xcdffffff]
[ 0.463428] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.463456] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.463484] pci 0000:02:00.0: reg 1c 64bit mmio: [0xce000000-0xcfffffff]
[ 0.463504] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.463524] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff]
[ 0.463672] pci 0000:02:00.1: reg 10 32bit mmio: [0xfeb7c000-0xfeb7ffff]
[ 0.463864] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.463878] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd000000-0xfebfffff]
[ 0.463896] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[ 0.463984] pci 0000:00:1e.0: transparent bridge
[ 0.464045] pci_bus 0000:00: on NUMA node 0
[ 0.464064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.464432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.464723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.464920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.490299] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.490693] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.491080] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.491459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.491837] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.492242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.492626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.493009] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.493760] SCSI subsystem initialized
[ 0.493822] libata version 3.00 loaded.
[ 0.493822] usbcore: registered new interface driver usbfs
[ 0.493822] usbcore: registered new interface driver hub
[ 0.496057] usbcore: registered new device driver usb
[ 0.496262] ACPI: WMI: Mapper loaded
[ 0.496262] PCI: Using ACPI for IRQ routing
[ 0.496348] pci 0000:00:1f.2: BAR 5: address space collision on of device [0x00fc00-0x00ffff]
[ 0.496360] pci 0000:00:1f.2: BAR 5: can't allocate resource
[ 0.504045] Bluetooth: Core ver 2.15
[ 0.504129] NET: Registered protocol family 31
[ 0.504129] Bluetooth: HCI device and connection manager initialized
[ 0.504129] Bluetooth: HCI socket layer initialized
[ 0.504129] NetLabel: Initializing
[ 0.504129] NetLabel: domain hash size = 128
[ 0.504129] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504159] NetLabel: unlabeled traffic allowed by default
[ 0.504309] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.504332] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.516035] Switched to high resolution mode on CPU 0
[ 0.517354] Switched to high resolution mode on CPU 2
[ 0.519775] Switched to high resolution mode on CPU 3
[ 0.519813] Switched to high resolution mode on CPU 1
[ 0.533055] pnp: PnP ACPI init
[ 0.533130] ACPI: bus type pnp registered
[ 0.549162] pnp: PnP ACPI: found 19 devices
[ 0.549175] ACPI: ACPI bus type pnp unregistered
[ 0.549189] PnPBIOS: Disabled by ACPI PNP
[ 0.549235] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.549250] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.549286] system 00:09: ioport range 0xa00-0xadf has been reserved
[ 0.549300] system 00:09: ioport range 0xae0-0xaef has been reserved
[ 0.549325] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.549339] system 00:0a: ioport range 0x800-0x87f has been reserved
[ 0.549353] system 00:0a: ioport range 0x480-0x4bf has been reserved
[ 0.549367] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.549382] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.549408] system 00:0d: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.549434] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.549448] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.549474] system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.549499] system 00:12: iomem range 0x0-0x9ffff could not be reserved
[ 0.549514] system 00:12: iomem range 0xc0000-0xcffff could not be reserved
[ 0.549528] system 00:12: iomem range 0xe0000-0xfffff could not be reserved
[ 0.549542] system 00:12: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.549556] system 00:12: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.584717] AppArmor: AppArmor Filesystem Enabled
[ 0.584826] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.584840] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.584857] pci 0000:00:1c.0: MEM window: 0xfcf00000-0xfcffffff
[ 0.584873] pci 0000:00:1c.0: PREFETCH window: 0x000000cdf00000-0x000000cdffffff
[ 0.584892] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.584905] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.584920] pci 0000:00:1c.1: MEM window: 0xfd000000-0xfebfffff
[ 0.584935] pci 0000:00:1c.1: PREFETCH window: 0x000000ce000000-0x000000dfffffff
[ 0.584953] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.584962] pci 0000:00:1e.0: IO window: disabled
[ 0.584975] pci 0000:00:1e.0: MEM window: disabled
[ 0.584987] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.585041] alloc irq_desc for 16 on node -1
[ 0.585051] alloc kstat_irqs on node -1
[ 0.585075] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.585091] pci 0000:00:1c.0: setting latency timer to 64
[ 0.585112] alloc irq_desc for 17 on node -1
[ 0.585121] alloc kstat_irqs on node -1
[ 0.585137] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.585152] pci 0000:00:1c.1: setting latency timer to 64
[ 0.585171] pci 0000:00:1e.0: setting latency timer to 64
[ 0.585188] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.585200] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.585212] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.585224] pci_bus 0000:01: resource 1 mem: [0xfcf00000-0xfcffffff]
[ 0.585236] pci_bus 0000:01: resource 2 pref mem [0xcdf00000-0xcdffffff]
[ 0.585249] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.585260] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfebfffff]
[ 0.585272] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xdfffffff]
[ 0.585285] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.585297] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.585434] NET: Registered protocol family 2
[ 0.585818] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.587005] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.588867] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.589774] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.589788] TCP reno registered
[ 0.590166] NET: Registered protocol family 1
[ 0.590402] Trying to unpack rootfs image as initramfs...
[ 1.235411] Freeing initrd memory: 7089k freed
[ 1.246446] cpufreq-nforce2: No nForce2 chipset.
[ 1.246557] Scanning for low memory corruption every 60 seconds
[ 1.246944] audit: initializing netlink socket (disabled)
[ 1.246991] type=2000 audit(1274268911.245:1): initialized
[ 1.281538] highmem bounce pool size: 64 pages
[ 1.281563] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.287902] VFS: Disk quotas dquot_6.5.2
[ 1.288158] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.290593] fuse init (API version 7.12)
[ 1.290956] msgmni has been set to 1679
[ 1.292074] alg: No test for stdrng (krng)
[ 1.292122] io scheduler noop registered
[ 1.292134] io scheduler anticipatory registered
[ 1.292147] io scheduler deadline registered
[ 1.292350] io scheduler cfq registered (default)
[ 1.292575] pci 0000:02:00.0: Boot video device
[ 1.292905] alloc irq_desc for 24 on node -1
[ 1.292916] alloc kstat_irqs on node -1
[ 1.292946] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.292968] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.293353] alloc irq_desc for 25 on node -1
[ 1.293363] alloc kstat_irqs on node -1
[ 1.293386] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.293407] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.293698] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.293988] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.294422] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.294438] ACPI: Power Button [PWRF]
[ 1.294664] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.294678] ACPI: Power Button [PWRB]
[ 1.295645] processor LNXCPU:00: registered as cooling_device0
[ 1.295804] processor LNXCPU:01: registered as cooling_device1
[ 1.295951] processor LNXCPU:02: registered as cooling_device2
[ 1.296122] processor LNXCPU:03: registered as cooling_device3
[ 1.305945] isapnp: Scanning for PnP cards...
[ 1.659700] isapnp: No Plug & Play device found
[ 1.664805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.665007] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.665202] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.666239] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.666537] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.670691] brd: module loaded
[ 1.672761] loop: module loaded
[ 1.673132] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.673563] ata_piix 0000:00:1f.2: version 2.13
[ 1.673603] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 1.673625] alloc irq_desc for 19 on node -1
[ 1.673634] alloc kstat_irqs on node -1
[ 1.673659] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.673676] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.673786] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.674041] scsi0 : ata_piix
[ 1.674400] scsi1 : ata_piix
[ 1.680170] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.680185] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.683807] Fixed MDIO Bus: probed
[ 1.683969] PPP generic driver version 2.4.2
[ 1.684370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.684446] alloc irq_desc for 23 on node -1
[ 1.684456] alloc kstat_irqs on node -1
[ 1.684481] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.684529] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.684542] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.684669] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.684688] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.688641] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.688658] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.688716] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcefbc00
[ 1.700039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.700320] usb usb1: configuration #1 chosen from 1 choice
[ 1.700453] hub 1-0:1.0: USB hub found
[ 1.700485] hub 1-0:1.0: 8 ports detected
[ 1.700700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.700795] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.700920] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.700944] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.700956] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.701133] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.701187] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[ 1.701498] usb usb2: configuration #1 chosen from 1 choice
[ 1.701640] hub 2-0:1.0: USB hub found
[ 1.701669] hub 2-0:1.0: 2 ports detected
[ 1.701822] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.701843] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.701855] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.701981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.702051] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[ 1.702357] usb usb3: configuration #1 chosen from 1 choice
[ 1.702470] hub 3-0:1.0: USB hub found
[ 1.702510] hub 3-0:1.0: 2 ports detected
[ 1.702658] alloc irq_desc for 18 on node -1
[ 1.702669] alloc kstat_irqs on node -1
[ 1.702692] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.702718] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.702730] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.702855] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.702922] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 1.703237] usb usb4: configuration #1 chosen from 1 choice
[ 1.703350] hub 4-0:1.0: USB hub found
[ 1.703379] hub 4-0:1.0: 2 ports detected
[ 1.703529] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.703549] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.703561] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.703696] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.703764] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[ 1.704087] usb usb5: configuration #1 chosen from 1 choice
[ 1.704204] hub 5-0:1.0: USB hub found
[ 1.704232] hub 5-0:1.0: 2 ports detected
[ 1.704606] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.705088] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.705116] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.705386] mice: PS/2 mouse device common for all mice
[ 1.705736] rtc_cmos 00:03: RTC can wake from S4
[ 1.705875] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.705930] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.706403] device-mapper: uevent: version 1.0.3
[ 1.706823] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.707340] device-mapper: multipath: version 1.1.0 loaded
[ 1.707354] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.707889] EISA: Probing bus 0 at eisa.0
[ 1.707949] EISA: Detected 0 cards.
[ 1.708803] cpuidle: using governor ladder
[ 1.708813] cpuidle: using governor menu
[ 1.710899] TCP cubic registered
[ 1.711565] NET: Registered protocol family 10
[ 1.713435] lo: Disabled Privacy Extensions
[ 1.714723] NET: Registered protocol family 17
[ 1.714804] Bluetooth: L2CAP ver 2.13
[ 1.714812] Bluetooth: L2CAP socket layer initialized
[ 1.714824] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.714831] Bluetooth: SCO socket layer initialized
[ 1.715003] Bluetooth: RFCOMM TTY layer initialized
[ 1.715028] Bluetooth: RFCOMM socket layer initialized
[ 1.715038] Bluetooth: RFCOMM ver 1.11
[ 1.715189] Using IPI No-Shortcut mode
[ 1.715492] PM: Resume from disk failed.
[ 1.715545] registered taskstats version 1
[ 1.716039] Magic number: 10:615:580
[ 1.716121] pci_bus 0000:01: hash matches
[ 1.716214] rtc_cmos 00:03: setting system clock to 2010-05-19 11:35:12 UTC (1274268912)
[ 1.716228] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.716236] EDD information not available.
[ 1.724079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.840319] ata2.01: NODEV after polling detection
[ 1.848306] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[ 1.856524] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.856539] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.864383] ata2.00: configured for UDMA/100
[ 1.880552] ata1.00: configured for UDMA/133
[ 1.880959] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.881429] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.881637] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.881895] sd 0:0:0:0: [sda] Write Protect is off
[ 1.881909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.882043] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.882681] sda:
[ 1.886275] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
[ 1.890265] sr0: scsi3-mmc drive: 37x/37x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.890279] Uniform CD-ROM driver Revision: 3.20
[ 1.890608] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.890814] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.907334] sda1 sda2 < sda5 >
[ 1.938172] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.938262] Freeing unused kernel memory: 540k freed
[ 1.939079] Write protecting the kernel text: 4580k
[ 1.939221] Write protecting the kernel read-only data: 1840k
[ 2.069554] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 2.201467] usb 1-4: configuration #1 chosen from 1 choice
[ 2.316603] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 2.445914] usb 1-7: configuration #1 chosen from 1 choice
[ 2.556062] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 2.847975] usb 1-8: configuration #1 chosen from 1 choice
[ 2.938678] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.938746] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.938846] r8169 0000:01:00.0: setting latency timer to 64
[ 2.938944] alloc irq_desc for 26 on node -1
[ 2.938959] alloc kstat_irqs on node -1
[ 2.939007] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 2.942653] eth0: RTL8168d/8111d at 0xf8094000, e0:cb:4e:87:0c:82, XID 281000c0 IRQ 26
[ 3.003614] Initializing USB Mass Storage driver...
[ 3.007936] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.010601] usb-storage: device found at 4
[ 3.010617] usb-storage: waiting for device to settle before scanning
[ 3.016148] scsi3 : SCSI emulation for USB Mass Storage devices
[ 3.016910] usbcore: registered new interface driver usb-storage
[ 3.016935] USB Mass Storage support registered.
[ 3.017640] usb-storage: device found at 5
[ 3.017654] usb-storage: waiting for device to settle before scanning
[ 3.100566] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.270809] usb 2-2: configuration #1 chosen from 1 choice
[ 3.892674] PM: Starting manual resume from disk
[ 3.892691] PM: Resume from partition 252:1
[ 3.892700] PM: Checking hibernation image.
[ 3.893023] PM: Resume from disk failed.
[ 3.908153] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 3.908174] EXT4-fs (dm-0): write access will be enabled during recovery
[ 3.938361] EXT4-fs (dm-0): barriers enabled
[ 5.707623] kjournald2 starting: pid 371, dev dm-0:8, commit interval 5 seconds
[ 5.708070] EXT4-fs (dm-0): delayed allocation enabled
[ 5.708088] EXT4-fs: file extents enabled
[ 5.822492] EXT4-fs: mballoc enabled
[ 5.822572] EXT4-fs (dm-0): recovery complete
[ 5.823132] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 8.008282] usb-storage: device scan complete
[ 8.008975] scsi 2:0:0:0: Direct-Access WDC WD15 EARS-00Z5B1 PQ: 0 ANSI: 2 CCS
[ 8.010756] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.020256] usb-storage: device scan complete
[ 8.021116] scsi 3:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[ 8.023381] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 8.025409] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 8.240055] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 8.240906] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.240922] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 8.240932] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.242804] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.242827] sdb: sdb1
[ 8.245527] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.245542] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 17.846933] udev: starting version 147
[ 17.874461] Adding 9068536k swap on /dev/mapper/wohnzimmer-swap_1. Priority:-1 extents:1 across:9068536k
[ 18.037944] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.195056] Linux agpgart interface v0.103
[ 18.305260] nvidia: module license 'NVIDIA' taints kernel.
[ 18.305281] Disabling lock debugging due to kernel taint
[ 18.387745] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 18.414561] dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state.
[ 18.414594] pctv452e_power_ctrl: 1
[ 18.445126] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 18.446234] DVB: registering new adapter (Technotrend TT Connect S2-3650-CI)
[ 18.446834] pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.
[ 18.450419] dvb-usb: MAC address: 00:d0:5c:b7:85:28
[ 18.451445] pctv452e_frontend_attach Enter
[ 18.550801] lp: driver loaded but no devices found
[ 18.591481] nvidia 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.591525] nvidia 0000:02:00.0: setting latency timer to 64
[ 18.592995] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.30 Fri Dec 18 13:34:49 PST 2009
[ 18.669408] evbug.c: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 18.669435] evbug.c: Connected device: input1 (Power Button at PNP0C0C/button/input0)
[ 18.669454] evbug.c: Connected device: input2 (Macintosh mouse button emulation at unknown)
[ 18.669473] evbug.c: Connected device: input3 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 18.669491] evbug.c: Connected device: input4 (PC Speaker at isa0061/input0)
[ 18.738378] r8169: eth0: link up
[ 18.738412] r8169: eth0: link up
[ 18.796003] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.796152] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.810870] lirc_dev: IR Remote Control driver registered, major 61
[ 18.820637]
[ 18.820645] lirc_atiusb: USB remote driver for LIRC $Revision: 1.85 $
[ 18.820662] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[ 18.820778] lirc_dev: lirc_register_driver: sample_rate: 0
[ 18.835871] lirc_atiusb[2]: X10 WTI RF receiver on usb2:2
[ 18.839685] parport_pc 00:06: reported by Plug and Play ACPI
[ 18.839775] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 18.848084] usbcore: registered new interface driver lirc_atiusb
[ 18.857200] Error: Driver 'pcspkr' is already registered, aborting...
[ 18.875245] ppdev: user-space parallel port driver
[ 18.909718] stb0899_attach: Attaching STB0899
[ 18.924981] lp0: using parport0 (interrupt-driven).
[ 18.959328] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 18.961423] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 18.961680] evbug.c: Connected device: input5 (HDA Digital PCBeep at card0/codec#0/beep0)
[ 18.966793] pctv452e: CI initialized.
[ 18.966814] pctv452e_frontend_attach Leave Ok
[ 18.966836] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 18.967103] pctv452e_tuner_attach Enter
[ 19.039643] stb6100_attach: Attaching STB6100
[ 19.039667] pctv452e_tuner_attach Leave
[ 19.040477] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input6
[ 19.040791] evbug.c: Connected device: input6 (IR-receiver inside an USB DVB receiver at usb-0000:00:1d.7-4/ir0)
[ 19.040816] dvb-usb: schedule remote query interval to 500 msecs.
[ 19.040842] pctv452e_power_ctrl: 0
[ 19.040854] dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected.
[ 19.042127] usbcore: registered new interface driver pctv452e
[ 19.042341] usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
[ 19.110119] psmouse serio1: ID: 10 00 64
[ 19.580128] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 19.580374] evbug.c: Connected device: input7 (ImPS/2 Generic Wheel Mouse at isa0060/serio1/input0)
[ 20.787338] EXT4-fs (dm-0): internal journal on dm-0:8
[ 25.326213] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 26.053691] RPC: Registered udp transport module.
[ 26.053705] RPC: Registered tcp transport module.
[ 26.194629] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.490875] svc: failed to register lockdv1 RPC service (errno 97).
[ 26.497369] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 26.510079] NFSD: starting 90-second grace period
[ 27.696351] CPU0 attaching NULL sched-domain.
[ 27.696382] CPU1 attaching NULL sched-domain.
[ 27.696398] CPU2 attaching NULL sched-domain.
[ 27.696414] CPU3 attaching NULL sched-domain.
[ 27.709370] CPU0 attaching sched-domain:
[ 27.709394] domain 0: span 0,2 level SIBLING
[ 27.709413] groups: 0 2
[ 27.709440] domain 1: span 0-3 level MC
[ 27.709457] groups: 0,2 (__cpu_power = 2048) 1,3 (__cpu_power = 2048)
[ 27.709502] CPU1 attaching sched-domain:
[ 27.709518] domain 0: span 1,3 level SIBLING
[ 27.709534] groups: 1 3
[ 27.709560] domain 1: span 0-3 level MC
[ 27.709575] groups: 1,3 (__cpu_power = 2048) 0,2 (__cpu_power = 2048)
[ 27.709617] CPU2 attaching sched-domain:
[ 27.709633] domain 0: span 0,2 level SIBLING
[ 27.709649] groups: 2 0
[ 27.709675] domain 1: span 0-3 level MC
[ 27.709690] groups: 0,2 (__cpu_power = 2048) 1,3 (__cpu_power = 2048)
[ 27.709731] CPU3 attaching sched-domain:
[ 27.709747] domain 0: span 1,3 level SIBLING
[ 27.709762] groups: 3 1
[ 27.709789] domain 1: span 0-3 level MC
[ 27.709804] groups: 1,3 (__cpu_power = 2048) 0,2 (__cpu_power = 2048)
[ 27.983925] pctv452e_power_ctrl: 1
[ 29.300619] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[ 29.517555] eth0: no IPv6 routers present
[62719.982594] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[85789.814540] Fritz Plugin In[2840]: segfault at 6e8208c1 ip 001faf08 sp a720ed10 error 6 in libstdc++.so.6.0.13[18f000+e6000]
[85790.253391] pctv452e_power_ctrl: 0
[85797.241240] pctv452e_power_ctrl: 1
[85799.174364] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[85856.524180] Fritz Plugin In[6010]: segfault at 8 ip 0081e5b3 sp a71fdbac error 6 in libc-2.10.1.so[7b1000+13e000]
[85864.118474] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[96598.975974] Fritz Plugin In[6282] general protection ip:3b1b59d sp:a6d19160 error:0 in libvdr-fritzbox.so.1.7.10[3b08000+4e000]
[96599.257382] usbcore: deregistering interface driver pctv452e
[96599.257464] dvb-usb: bulk message failed: -2 (5/0)
[96599.257482] pctv452e: CI error -2; AA 2B 46 -> AA 2B 46.
[96599.257561] dvb-usb: bulk message failed: -2 (5/0)
[96599.257575] pctv452e: CI error -2; AA 2C 46 -> AA 2C 46.
[96599.257834] evbug.c: Event. Dev: input6, Type: 0, Code: 0, Value: 1
[96599.288067] evbug.c: Disconnected device: input6
[96599.304362] dvb-usb: bulk message failed: -2 (11/0)
[96599.304389] pctv452e: I2C error -2; AA 2D 10 04 00 -> AA 2D 10 04 00.
[96599.304409] dvb-usb: bulk message failed: -2 (9/0)
[96599.304424] pctv452e: I2C error -2; AA 2E D0 02 00 -> AA 2E D0 02 00.
[96599.304441] dvb-usb: bulk message failed: -2 (9/0)
[96599.304456] pctv452e: I2C error -2; AA 2F D0 02 00 -> AA 2F D0 02 00.
[96599.304476] dvb-usb: bulk message failed: -2 (10/0)
[96599.304491] pctv452e: I2C error -2; AA 30 D0 03 00 -> AA 30 D0 03 00.
[96599.304505] pctv452e_power_ctrl: 0
[96599.304801] dvb-usb: bulk message failed: -2 (11/0)
[96599.304824] pctv452e: I2C error -2; AA 31 10 04 00 -> AA 31 10 04 00.
[96599.304856] dvb-usb: bulk message failed: -2 (10/0)
[96599.304871] pctv452e: I2C error -2; AA 32 D0 03 00 -> AA 32 D0 03 00.
[96599.305627] dvb-usb: Technotrend TT Connect S2-3650-CI successfully deinitialized and disconnected.
[96599.306960] usbcore: deregistering interface driver dvb-usb-tt-connect-s2-3600-01.fw
[96601.534275] dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state.
[96601.534318] pctv452e_power_ctrl: 1
[96601.536126] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[96601.536862] DVB: registering new adapter (Technotrend TT Connect S2-3650-CI)
[96601.537803] pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.
[96601.540953] dvb-usb: MAC address: 00:d0:5c:b7:85:28
[96601.543004] pctv452e_frontend_attach Enter
[96601.585124] stb0899_attach: Attaching STB0899
[96601.593347] pctv452e: CI initialized.
[96601.593373] pctv452e_frontend_attach Leave Ok
[96601.593397] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[96601.593769] pctv452e_tuner_attach Enter
[96601.594568] stb6100_attach: Attaching STB6100
[96601.594583] pctv452e_tuner_attach Leave
[96601.595455] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input8
[96601.595679] evbug.c: Connected device: input8 (IR-receiver inside an USB DVB receiver at usb-0000:00:1d.7-4/ir0)
[96601.595695] dvb-usb: schedule remote query interval to 500 msecs.
[96601.595711] pctv452e_power_ctrl: 0
[96601.595720] dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected.
[96601.595811] usbcore: registered new interface driver pctv452e
[96601.595915] usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
[96607.848369] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[96617.870926] pctv452e_power_ctrl: 1
[96619.106912] dvb_ca adapter 0: DVB CAM detected and initialised successfully
[107718.301455] Fritz Plugin In[6594]: segfault at 8 ip 0036a5b3 sp a710ebac error 6 in libc-2.10.1.so[2fd000+13e000]
[107726.398632] dvb_ca adapter 0: DVB CAM detected and initialised successfully

Hi poldy1234

dein Problem geht wohl etwas am Thema vorbei und auf die Weise wird dir kaum jemand drauf antworten. Mach für dein Problem besser ein extra Thema auf ...

Gruss Kai