[GELÖST!!!!] yavdr nach 30sec ORF bild kein Signal

  • Hallo,


    mein System hat leider eine sehr unangenehme Eigenheit, und ich hoffe
    mir kann jemand von euch helfen.


    Wenn ich einen ORF sender anschauen möchte, dann bekommen ich ca.30 sekunden ein Bild, und danach die Information "Kanal nicht verfügbar"
    Nach einigen Sekunden kommt dan wieder kurz ein Bild, und alles beginnt von vorne.


    ORF HD zeigt leider nie ein Bild.


    Ich verwende eine tt connect S2 3650 Ci mit einem Cryptoworksmodul und einer gültigen ORF Karte, in Verbindung mit einem Zotac ION Mainboard.


    Beides funzt in einem Sat-Receiver ohne Probleme, also sollte es nicht daran liegen.


    Kann mir bitte jemand hlefen??


    Danke


    Lg
    Ingo

    Zotac ION Mainboard, 2GB Ram, 1,5TB HDD, TT-Connect S2 3650 CI
    (ALT: TechniSat TechniCAM/TechniCrypt CW Cryptoworks CA-Modul)
    Aktuell: Cryptoworks CAM/CI-Modul inkl. ORF-Karte
    Yavdr

    Einmal editiert, zuletzt von ingostar ()

  • Vielleicht kann man mir einfacher helfen mit den Log-Files:


    /var/log/messages:
    Feb 13 20:29:24 ubuntu kernel: [ 2.488436] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.0/input/input3
    Feb 13 20:29:24 ubuntu kernel: [ 2.488580] generic-usb 0003:05A4:9881.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:06.0-1/input0
    Feb 13 20:29:24 ubuntu kernel: [ 2.519127] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.1/input/input4
    Feb 13 20:29:24 ubuntu kernel: [ 2.519411] generic-usb 0003:05A4:9881.0002: input,hidraw1: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:06.0-1/input1
    Feb 13 20:29:24 ubuntu kernel: [ 2.519452] usbcore: registered new interface driver usbhid
    Feb 13 20:29:24 ubuntu kernel: [ 2.519459] usbhid: v2.6:USB HID core driver
    Feb 13 20:29:24 ubuntu kernel: [ 2.769043] usb 4-3: new low speed USB device using ohci_hcd and address 3
    Feb 13 20:29:24 ubuntu kernel: [ 2.899080] PM: Starting manual resume from disk
    Feb 13 20:29:24 ubuntu kernel: [ 2.910713] EXT4-fs (sda1): barriers enabled
    Feb 13 20:29:24 ubuntu kernel: [ 2.922344] kjournald2 starting: pid 340, dev sda1:8, commit interval 5 seconds
    Feb 13 20:29:24 ubuntu kernel: [ 2.922365] EXT4-fs (sda1): delayed allocation enabled
    Feb 13 20:29:24 ubuntu kernel: [ 2.922374] EXT4-fs: file extents enabled
    Feb 13 20:29:24 ubuntu kernel: [ 2.926698] EXT4-fs: mballoc enabled
    Feb 13 20:29:24 ubuntu kernel: [ 2.926729] EXT4-fs (sda1): mounted filesystem with ordered data mode
    Feb 13 20:29:24 ubuntu kernel: [ 2.991071] usb 4-3: configuration #1 chosen from 1 choice
    Feb 13 20:29:24 ubuntu kernel: [ 3.001470] input: Wireless touchpad keyboard as /devices/pci0000:00/0000:00:06.0/usb4/4-3/4-3:1.0/input/input5
    Feb 13 20:29:24 ubuntu kernel: [ 3.001610] generic-usb 0003:0DC6:2301.0003: input,hidraw2: USB HID v1.00 Keyboard [ Wireless touchpad keyboard] on usb-0000:00:06.0-3/input0
    Feb 13 20:29:24 ubuntu kernel: [ 3.011640] input: Wireless touchpad keyboard as /devices/pci0000:00/0000:00:06.0/usb4/4-3/4-3:1.1/input/input6
    Feb 13 20:29:24 ubuntu kernel: [ 3.011821] generic-usb 0003:0DC6:2301.0004: input,hidraw3: USB HID v1.00 Mouse [ Wireless touchpad keyboard] on usb-0000:00:06.0-3/input1
    Feb 13 20:29:24 ubuntu kernel: [ 7.305761] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
    Feb 13 20:29:24 ubuntu kernel: [ 7.311966] udev: starting version 147
    Feb 13 20:29:24 ubuntu kernel: [ 7.357536] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00
    Feb 13 20:29:24 ubuntu kernel: [ 7.357588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Feb 13 20:29:24 ubuntu kernel: [ 7.367096] lp: driver loaded but no devices found
    Feb 13 20:29:24 ubuntu kernel: [ 7.408442] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Feb 13 20:29:24 ubuntu kernel: [ 7.414149] EXT4-fs (sda1): internal journal on sda1:8
    Feb 13 20:29:24 ubuntu kernel: [ 7.425610] Linux agpgart interface v0.103
    Feb 13 20:29:24 ubuntu kernel: [ 7.665804] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    Feb 13 20:29:24 ubuntu kernel: [ 7.666922] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
    Feb 13 20:29:24 ubuntu kernel: [ 7.666937] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
    Feb 13 20:29:24 ubuntu kernel: [ 7.720131] nvidia: module license 'NVIDIA' taints kernel.
    Feb 13 20:29:24 ubuntu kernel: [ 7.720142] Disabling lock debugging due to kernel taint
    Feb 13 20:29:24 ubuntu kernel: [ 7.847677] dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state.
    Feb 13 20:29:24 ubuntu kernel: [ 7.847695] pctv452e_power_ctrl: 1
    Feb 13 20:29:24 ubuntu kernel: [ 7.850126] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    Feb 13 20:29:24 ubuntu kernel: [ 7.850354] DVB: registering new adapter (Technotrend TT Connect S2-3650-CI)
    Feb 13 20:29:24 ubuntu kernel: [ 7.854980] dvb-usb: MAC address: 00:d0:5c:b7:7d:f3
    Feb 13 20:29:24 ubuntu kernel: [ 7.855569] pctv452e_frontend_attach Enter
    Feb 13 20:29:24 ubuntu kernel: [ 7.915277] stb0899_attach: Attaching STB0899
    Feb 13 20:29:24 ubuntu kernel: [ 7.949922] pctv452e: CI initialized.
    Feb 13 20:29:24 ubuntu kernel: [ 7.949932] pctv452e_frontend_attach Leave Ok
    Feb 13 20:29:24 ubuntu kernel: [ 7.949944] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
    Feb 13 20:29:24 ubuntu kernel: [ 7.950101] pctv452e_tuner_attach Enter
    Feb 13 20:29:24 ubuntu kernel: [ 8.009457] stb6100_attach: Attaching STB6100
    Feb 13 20:29:24 ubuntu kernel: [ 8.009471] pctv452e_tuner_attach Leave
    Feb 13 20:29:24 ubuntu kernel: [ 8.010259] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-2/input/input7
    Feb 13 20:29:24 ubuntu kernel: [ 8.010398] dvb-usb: schedule remote query interval to 500 msecs.
    Feb 13 20:29:24 ubuntu kernel: [ 8.010411] pctv452e_power_ctrl: 0
    Feb 13 20:29:24 ubuntu kernel: [ 8.010418] dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected.
    Feb 13 20:29:24 ubuntu kernel: [ 8.010487] usbcore: registered new interface driver pctv452e
    Feb 13 20:29:24 ubuntu kernel: [ 8.010552] usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
    Feb 13 20:29:24 ubuntu kernel: [ 8.104227] cfg80211: Calling CRDA to update world regulatory domain
    Feb 13 20:29:24 ubuntu kernel: [ 8.175602] cfg80211: World regulatory domain updated:
    Feb 13 20:29:24 ubuntu kernel: [ 8.175625] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Feb 13 20:29:24 ubuntu kernel: [ 8.175637] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Feb 13 20:29:24 ubuntu kernel: [ 8.175662] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Feb 13 20:29:24 ubuntu kernel: [ 8.175686] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Feb 13 20:29:24 ubuntu kernel: [ 8.175707] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Feb 13 20:29:24 ubuntu kernel: [ 8.175728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Feb 13 20:29:24 ubuntu kernel: [ 8.211915] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
    Feb 13 20:29:24 ubuntu kernel: [ 8.211959] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
    Feb 13 20:29:24 ubuntu kernel: [ 8.643895] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
    Feb 13 20:29:24 ubuntu kernel: [ 8.748558] Registered led device: ath9k-phy0::radio
    Feb 13 20:29:24 ubuntu kernel: [ 8.748629] Registered led device: ath9k-phy0::assoc
    Feb 13 20:29:24 ubuntu kernel: [ 8.748693] Registered led device: ath9k-phy0::tx
    Feb 13 20:29:24 ubuntu kernel: [ 8.748758] Registered led device: ath9k-phy0::rx
    Feb 13 20:29:24 ubuntu kernel: [ 8.748813] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xfa520000, irq=19
    Feb 13 20:29:24 ubuntu kernel: [ 9.000268] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input8
    Feb 13 20:29:25 ubuntu kernel: [ 9.421704] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23
    Feb 13 20:29:25 ubuntu kernel: [ 9.421722] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23
    Feb 13 20:29:25 ubuntu kernel: [ 9.423048] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
    Feb 13 20:29:25 ubuntu kernel: [ 9.423069] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22
    Feb 13 20:29:25 ubuntu kernel: [ 9.424080] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.30 Fri Dec 18 13:34:49 PST 2009
    Feb 13 20:29:26 ubuntu vdr: [1463] [xine..put] Listening on address '127.0.0.1' port 37890
    Feb 13 20:29:26 ubuntu kernel: [ 10.276490] RPC: Registered udp transport module.
    Feb 13 20:29:26 ubuntu kernel: [ 10.276536] RPC: Registered tcp transport module.
    Feb 13 20:29:26 ubuntu kernel: [ 10.347197] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Feb 13 20:29:26 ubuntu kernel: [ 10.538448] svc: failed to register lockdv1 RPC service (errno 97).
    Feb 13 20:29:26 ubuntu kernel: [ 10.543707] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    Feb 13 20:29:26 ubuntu kernel: [ 10.545514] NFSD: starting 90-second grace period
    Feb 13 20:29:27 ubuntu kernel: [ 11.601965] pctv452e_power_ctrl: 1
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening on port 37890
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening for UDP broadcasts on port 37890
    Feb 13 20:29:30 ubuntu kernel: [ 14.546978] dvb_ca adapter 0: DVB CAM detected and initialised successfully
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34063
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client connection 0 closed
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Closing connection 0
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Detected 4 CPUs
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Enabling FFmpeg multithreaded video decoding
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34064
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1463/pipe.0
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Data stream connected (PIPE)
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "FFmpeg" for H.264 video
    Feb 13 20:29:34 ubuntu vdr-sxfe[3214]: [3227] [vdr-fe] Keyboard thread terminated
    Feb 13 20:29:40 ubuntu vdr-sxfe[3214]: [3226] [demux_vdr] PMT changed





    /var/log/user.log:
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: channellists (0.0.4): Verwalte deine Kanallisten
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: externalplayer (0.1.0): launch external players
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: streamdev-server (0.5.0-pre): VDR Streaming Server
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: xineliboutput (1.0.90-cvs): X11/xine-lib Ausgabe-Plugin
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] cTimePts: using monotonic clock
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] RTP SSRC: 0x63a687bc
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: femon (1.7.5): DVB Signal Informationsanzeige (OSD)
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: text2skin (1.3): Lader für textbasierte Skins
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: iptv (0.3.1): Erlebe IPTV
    Feb 13 20:29:29 ubuntu vdr: [1463] creating IPTV device 0 (CardIndex=9)
    Feb 13 20:29:29 ubuntu vdr: [2747] section handler thread started (pid=1463, tid=2747)
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: epgsearch (0.9.25.beta15): Suche im EPG nach Wiederholungen und anderem
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: suspendoutput (1.0.1): Suspend output
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: extrecmenu (1.2-test1-am2b): Erweitertes Aufzeichnungs-Menü
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'extrecmenu' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: live (0.2.0): Live Interactive VDR Environment
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: epgsearchonly (0.0.1): Direkter Zugriff auf epgsearch's Suchenmenu
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: conflictcheckonly (0.0.1): Direkter Zugriff auf epgsearch's Konflikt-Prüfungs-Menü
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: menuorg (0.4.4): Reorganisiert das Haupmenü
    Feb 13 20:29:29 ubuntu vdr: [1463] loading menuorg config file from /var/lib/vdr/plugins/menuorg.xml
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: avolctl (0.3b): Alsa Volume Control
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'avolctl' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: quickepgsearch (0.0.1): Schnelle Suche nach Sendungen
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: wirbelscan (0.0.5-pre11a): DVB and pvrinput channel scan for VDR
    Feb 13 20:29:29 ubuntu vdr: [1463] setting primary device to 2
    Feb 13 20:29:29 ubuntu vdr: [1463] assuming manual start of VDR
    Feb 13 20:29:29 ubuntu vdr: [1463] SVDRP listening on port 2001
    Feb 13 20:29:29 ubuntu vdr: [1463] skin "PearlHD" not available - using "classic" instead
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/themes/classic-default.theme
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: channellists
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: externalplayer
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'externalplayer' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: streamdev-server
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/streamdev/streamdevhosts.conf
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: xineliboutput
    Feb 13 20:29:29 ubuntu vdr: [2753] streamdev server thread started (pid=1463, tid=2753)
    Feb 13 20:29:29 ubuntu vdr: [2754] Remote decoder/display server (cXinelibServer) thread started (pid=1463, tid=2754)
    Feb 13 20:29:29 ubuntu vdr: [2753] Streamdev: Listening (VTP) on port 2004
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99]
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Binding server to 127.0.0.1:37890
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening on port 37890
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening for UDP broadcasts on port 37890
    Feb 13 20:29:29 ubuntu vdr: [2753] Streamdev: Listening (HTTP) on port 3000
    Feb 13 20:29:29 ubuntu vdr: [2754] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server address: 127.0.0.1#015#012Server version: xineliboutput-1.0.90-cvs#015#012#015
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] cXinelibDevice::StartDevice(): Device started
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: femon
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: text2skin
    Feb 13 20:29:29 ubuntu vdr: [1463] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
    Feb 13 20:29:29 ubuntu vdr: [1463] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
    Feb 13 20:29:29 ubuntu vdr: [2740] CAM 1: module present
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: iptv
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: epgsearch
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
    Feb 13 20:29:29 ubuntu vdr: [2778] EPGSearch: conflictcheck thread started (pid=1463, tid=2778)
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: suspendoutput
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: extrecmenu
    Feb 13 20:29:29 ubuntu vdr: [2781] extrecmenu worker thread thread started (pid=1463, tid=2781)
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: live
    Feb 13 20:29:29 ubuntu vdr: [1463] LIVE: initial file cache has 82 entries and needs 307010 bytes of data!
    Feb 13 20:29:29 ubuntu vdr: [2785] ERROR: Unable to load cert/key (/var/lib/vdr/plugins/live/live.pem//var/lib/vdr/plugins/live/live-key.pem): No such file or directory
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: epgsearchonly
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: conflictcheckonly
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: menuorg
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: avolctl
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: quickepgsearch
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: wirbelscan
    Feb 13 20:29:29 ubuntu vdr: [1463] setting current skin to "PearlHD"
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/themes/PearlHD-default.theme
    Feb 13 20:29:29 ubuntu vdr: [1463] ERROR: /dev/lircd: No such file or directory
    Feb 13 20:29:29 ubuntu vdr: [1463] ERROR: remote control LIRC not ready!
    Feb 13 20:29:30 ubuntu vdr: [2740] CAM 1: module ready
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34063
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client connection 0 closed
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Closing connection 0
    Feb 13 20:29:32 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message
    Feb 13 20:29:32 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): Resource temporarily unavailable)
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Detected 4 CPUs
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Enabling FFmpeg multithreaded video decoding
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34064
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Trying PIPE connection ...
    Feb 13 20:29:33 ubuntu vdr: [2754] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1463
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1463/pipe.0
    Feb 13 20:29:33 ubuntu vdr: [2754] removing /var/lib/vdr/plugins/xineliboutput/pipes.1463
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cTcpWriter initialized (buffer 512 kb)
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Pipe open
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Data stream connected (PIPE)
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "FFmpeg" for H.264 video
    Feb 13 20:29:33 ubuntu vdr: [2740] CAM 1: TSD Crypt CW, 01, 0000, 033D
    Feb 13 20:29:34 ubuntu vdr-sxfe[3214]: [3227] [vdr-fe] read_key: read(stdin) failed: no stdin
    Feb 13 20:29:34 ubuntu vdr-sxfe[3214]: [3227] [vdr-fe] Keyboard thread terminated







    /var/log/syslog:


    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] cTimePts: using monotonic clock
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] RTP SSRC: 0x63a687bc
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: femon (1.7.5): DVB Signal Informationsanzeige (OSD)
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: text2skin (1.3): Lader für textbasierte Skins
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: iptv (0.3.1): Erlebe IPTV
    Feb 13 20:29:29 ubuntu vdr: [1463] creating IPTV device 0 (CardIndex=9)
    Feb 13 20:29:29 ubuntu vdr: [2747] section handler thread started (pid=1463, tid=2747)
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: epgsearch (0.9.25.beta15): Suche im EPG nach Wiederholungen und anderem
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: suspendoutput (1.0.1): Suspend output
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: extrecmenu (1.2-test1-am2b): Erweitertes Aufzeichnungs-Menü
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'extrecmenu' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: live (0.2.0): Live Interactive VDR Environment
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: epgsearchonly (0.0.1): Direkter Zugriff auf epgsearch's Suchenmenu
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: conflictcheckonly (0.0.1): Direkter Zugriff auf epgsearch's Konflikt-Prüfungs-Menü
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: menuorg (0.4.4): Reorganisiert das Haupmenü
    Feb 13 20:29:29 ubuntu vdr: [1463] loading menuorg config file from /var/lib/vdr/plugins/menuorg.xml
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: avolctl (0.3b): Alsa Volume Control
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'avolctl' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: quickepgsearch (0.0.1): Schnelle Suche nach Sendungen
    Feb 13 20:29:29 ubuntu vdr: [1463] initializing plugin: wirbelscan (0.0.5-pre11a): DVB and pvrinput channel scan for VDR
    Feb 13 20:29:29 ubuntu vdr: [1463] setting primary device to 2
    Feb 13 20:29:29 ubuntu vdr: [1463] assuming manual start of VDR
    Feb 13 20:29:29 ubuntu vdr: [1463] SVDRP listening on port 2001
    Feb 13 20:29:29 ubuntu vdr: [1463] skin "PearlHD" not available - using "classic" instead
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/themes/classic-default.theme
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: channellists
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: externalplayer
    Feb 13 20:29:29 ubuntu vdr: [1463] plugin 'externalplayer' called obsolete function RegisterI18n()
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: streamdev-server
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/streamdev/streamdevhosts.conf
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: xineliboutput
    Feb 13 20:29:29 ubuntu vdr: [2753] streamdev server thread started (pid=1463, tid=2753)
    Feb 13 20:29:29 ubuntu vdr: [2754] Remote decoder/display server (cXinelibServer) thread started (pid=1463, tid=2754)
    Feb 13 20:29:29 ubuntu vdr: [2753] Streamdev: Listening (VTP) on port 2004
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99]
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Binding server to 127.0.0.1:37890
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening on port 37890
    Feb 13 20:29:29 ubuntu vdr: [2754] [xine..put] Listening for UDP broadcasts on port 37890
    Feb 13 20:29:29 ubuntu vdr: [2753] Streamdev: Listening (HTTP) on port 3000
    Feb 13 20:29:29 ubuntu vdr: [2754] [discovery] BROADCAST: VDR xineliboutput DISCOVERY 1.0#015#012Server port: 37890#015#012Server address: 127.0.0.1#015#012Server version: xineliboutput-1.0.90-cvs#015#012#015
    Feb 13 20:29:29 ubuntu vdr: [1463] [xine..put] cXinelibDevice::StartDevice(): Device started
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: femon
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: text2skin
    Feb 13 20:29:29 ubuntu vdr: [1463] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
    Feb 13 20:29:29 ubuntu vdr: [1463] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
    Feb 13 20:29:29 ubuntu vdr: [2740] CAM 1: module present
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: iptv
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: epgsearch
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
    Feb 13 20:29:29 ubuntu vdr: [2778] EPGSearch: conflictcheck thread started (pid=1463, tid=2778)
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: suspendoutput
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: extrecmenu
    Feb 13 20:29:29 ubuntu vdr: [2781] extrecmenu worker thread thread started (pid=1463, tid=2781)
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: live
    Feb 13 20:29:29 ubuntu vdr: [1463] LIVE: initial file cache has 82 entries and needs 307010 bytes of data!
    Feb 13 20:29:29 ubuntu vdr: [2785] ERROR: Unable to load cert/key (/var/lib/vdr/plugins/live/live.pem//var/lib/vdr/plugins/live/live-key.pem): No such file or directory
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: epgsearchonly
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: conflictcheckonly
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: menuorg
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: avolctl
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: quickepgsearch
    Feb 13 20:29:29 ubuntu vdr: [1463] starting plugin: wirbelscan
    Feb 13 20:29:29 ubuntu vdr: [1463] setting current skin to "PearlHD"
    Feb 13 20:29:29 ubuntu vdr: [1463] loading /var/lib/vdr/themes/PearlHD-default.theme
    Feb 13 20:29:29 ubuntu vdr: [1463] ERROR: /dev/lircd: No such file or directory
    Feb 13 20:29:29 ubuntu vdr: [1463] ERROR: remote control LIRC not ready!
    Feb 13 20:29:29 ubuntu acpid: client connected from 978[103:106]
    Feb 13 20:29:30 ubuntu kernel: [ 14.546978] dvb_ca adapter 0: DVB CAM detected and initialised successfully
    Feb 13 20:29:30 ubuntu acpid: client connected from 3183[0:0]
    Feb 13 20:29:30 ubuntu vdr: [2740] CAM 1: module ready
    Feb 13 20:29:31 ubuntu acpid: client connected from 3183[0:0]
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34063
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Client connection 0 closed
    Feb 13 20:29:32 ubuntu vdr: [2754] [xine..put] Closing connection 0
    Feb 13 20:29:32 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Failed to open connection to bus: /bin/dbus-launch terminated abnormally without any error message
    Feb 13 20:29:32 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] (ERROR (tools/gnome_screensaver.c,61): Resource temporarily unavailable)
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Detected 4 CPUs
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [vdr-fe] Enabling FFmpeg multithreaded video decoding
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (control) to tcp://127.0.0.1:37890 ...
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Client 0 connected: 127.0.0.1:34064
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cxSocket: setsockopt(SO_SNDBUF): got 262142 bytes
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Server greeting: VDR-1.7.10 xineliboutput-1.0.90-cvs READY
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connected (control) to tcp://127.0.0.1:37890
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Trying PIPE connection ...
    Feb 13 20:29:33 ubuntu vdr: [2754] creating directory /var/lib/vdr/plugins/xineliboutput/pipes.1463
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Connecting (data) to pipe:///var/lib/vdr/plugins/xineliboutput/pipes.1463/pipe.0
    Feb 13 20:29:33 ubuntu vdr: [2754] removing /var/lib/vdr/plugins/xineliboutput/pipes.1463
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cBackgroundWriterI initialized (buffer 512 kb)
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] cTcpWriter initialized (buffer 512 kb)
    Feb 13 20:29:33 ubuntu vdr: [2754] [xine..put] Pipe open
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] Data stream connected (PIPE)
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [input_vdr] using custom "no signal" image /usr/share/libxine1-xvdr/nosignal.mpg
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "libmpeg2" for mpeg2 video
    Feb 13 20:29:33 ubuntu vdr-sxfe[3214]: [3214] [demux_vdr] Using decoder "FFmpeg" for H.264 video
    Feb 13 20:29:33 ubuntu vdr: [2740] CAM 1: TSD Crypt CW, 01, 0000, 033D
    Feb 13 20:29:33 ubuntu kernel: [ 17.892034] eth0: no IPv6 routers present
    Feb 13 20:29:34 ubuntu vdr-sxfe[3214]: [3227] [vdr-fe] read_key: read(stdin) failed: no stdin
    Feb 13 20:29:34 ubuntu vdr-sxfe[3214]: [3227] [vdr-fe] Keyboard thread terminated




    Und manchmal hab ich bei anderen Sendern auch sporadische Aussetzer,
    und auch dann bekomm ich die Meldung "No Siganal"


    Lg
    ingo

    Zotac ION Mainboard, 2GB Ram, 1,5TB HDD, TT-Connect S2 3650 CI
    (ALT: TechniSat TechniCAM/TechniCrypt CW Cryptoworks CA-Modul)
    Aktuell: Cryptoworks CAM/CI-Modul inkl. ORF-Karte
    Yavdr

  • Hallo,


    und weiter geht die Suche nach meinem Problem.


    Hab inzwischen herausgefunden, dass nach einem


    sudo apt-get update
    sudo apt-get upgrade
    sudo apt-get dist-upgrade
    sudo remove vdr-plugin-burn


    sich etwas an meinem System verändert hat.


    Nun ist so, dass ohne CI-CAM ORF2E, welches anscheinend nicht verschlüsselt ist funktionier.
    Stecke ich nun aber mein CI,mit Karte in die DVB-karte
    erhalte ich wieder genau das gleiche Verhalten wie oben.


    Kann mir bitte jemand helfen??


    lg
    ingo

    Zotac ION Mainboard, 2GB Ram, 1,5TB HDD, TT-Connect S2 3650 CI
    (ALT: TechniSat TechniCAM/TechniCrypt CW Cryptoworks CA-Modul)
    Aktuell: Cryptoworks CAM/CI-Modul inkl. ORF-Karte
    Yavdr

  • Hab endlich den Fehler gefunden.


    Schuld war anscheinend mein CI Modul.


    Habe ein neues Cryptoworksmodul gekauft, und siehe da es funzt.


    lg
    ingo

    Zotac ION Mainboard, 2GB Ram, 1,5TB HDD, TT-Connect S2 3650 CI
    (ALT: TechniSat TechniCAM/TechniCrypt CW Cryptoworks CA-Modul)
    Aktuell: Cryptoworks CAM/CI-Modul inkl. ORF-Karte
    Yavdr

  • ingostar
    Eine Frage: Funktionieren Aufnahmen von ORF HD einwandfrei? (Dann hätte ich eventuell auch eine Lösung für mein yaVDR Problem)

    SSD1: Asus AT3IONT-I, Mystique SaTiX-S2 V2 Dual, MLD 5.1 stable, SATA 1TB, Harmony FB 700, Atric Einschaltmodul
    SSD2: Testsystem - Hardware wie SSD1, MLD 5.1 stable
    Raspi3 mit MLD 5.3 stable, DVB-S Stick, FB an GPIO

  • Hallo eivissa,


    Habe nun die Aufnahme von ORFHD versucht.


    Beim Abspielen schaut das Bild schon recht gut aus, (manchmal sind kleine Bildfehler zu sehen), nicht so gut läufts mit dem Ton, der ist nur zeitweise kurz zu hören.


    Die Aufnahme andere Sender wie pro7 und co hat ohne probleme funktioniert.


    lg
    ingo

    Zotac ION Mainboard, 2GB Ram, 1,5TB HDD, TT-Connect S2 3650 CI
    (ALT: TechniSat TechniCAM/TechniCrypt CW Cryptoworks CA-Modul)
    Aktuell: Cryptoworks CAM/CI-Modul inkl. ORF-Karte
    Yavdr


  • Welches hast du dir zugelegt?


    Ich für meinen Teil hatte ähnliche Probleme mit einer TT 3200 Ci & Technisat Cryptoworks Modul.


    gruß,


    iksiks

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!