1080i sender ruckeln

  • Hallo. Ich versuche schon ein paar Tage ein problem zu lösen. Ich nutze vdr 1.7.9 mit dem xine-plugin. Alle Sender die 1080i senden (Astra HD, Servus TV HD) ruckeln bei mir. Alle anderen Sender (ARD HD, ZDF HD, Arte HD, u.s.w) funktionieren einwandfrei. Als Hardware nutze ich ein Asus A8N-E mit einen AMD Athlon 64 2,2Ghz, GF9400GT, 2Gb Ram, TT S2-1600. Betriebssystem ist ein Ubuntu 9.10 minimalinstallation. Was könnte mei mir zu langsam sein? Den Prozessor hatte ich eigentlich ausgeschlossen, da ich dachte das die decodierung des Streams die Grafikkarte per Vdpau übernimmt. Oder ist die 9400GT doch zu langsam für ein 1080i Sender?

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

  • Hängt sicher davon ab, welchen deinterlacer Du verwendest. Einfach mal bei wbreu nachsehen, was für die 9400 empfohlen wird und dann in der xine-config entsprechend anpassen (xine und vdr dürfen bei Änderungen and config nicht laufen!)


    Grüße, Peter

    KODI, tvh, arch x86_64, Octopus net 2 x Duoflex C/C2/T2 , NUC7i3BNH, Crucial MX300 2TB, LG LM 669S

    Linux is the best OS I have ever seen -- Albert Einstein

  • Was steht in Deiner xine-config unter folgendem Eintrag ?


    Code
    # vdpau: HD deinterlace method # { bob  half temporal  half temporal_spatial  temporal  temporal_spatial }, default: 3


    Die GF9400 dürfte hier maximal "temporal" schaffen. Am Besten "bob" einstellen.


    Gruß
    SieDu

  • Habe beide deinterlacer probiert. (bob und half temporal). leider ohne erfolg, das ruckeln bleibt. ich habe zwar das gefühl das es mit bob tatsache ein wenig besser wird aber leider nicht ganz weg. Das merkwürdige ist aber, wenn ich Arte HD aufnehme und mit xbmc wiedergebe, ruckelt es nicht. Deswegen dachte ich eigentlich das meine Hardware ausreichend ist.

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

    Einmal editiert, zuletzt von Asta ()

  • Nein, ausgabe läuft über HDMI 1920 x 1080p 50 Hz, Composite abgeschaltet.
    Bei 60Hz Ausgabe habe ich auf allen Sendern kleine Ruckler die man am besten bei der N24 Laufschrift sieht. Es betrifft wie gesagt auch nur die 1080i Sender. Installiert habe ich nach dieser Anleitung: http://www.vdr-portal.de/board/thread.php?threadid=90202. Die Treiber der Karte (dvb-s2api-liplianin) habe ich auch aus diesem Repository, da ich es nicht geschafft habe die v4l treiber selbst zu kompilieren.

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

    Einmal editiert, zuletzt von Asta ()

  • Zitat

    Original von Asta
    Nein, ausgabe läuft über HDMI 1920 x 1080p 50 Hz, Composite abgeschaltet.
    Bei 60Hz Ausgabe habe ich auf allen Sendern kleine Ruckler die man am besten bei der N24 Laufschrift sieht. Es betrifft wie gesagt auch nur die 1080i Sender. Installiert habe ich nach dieser Anleitung: http://www.vdr-portal.de/board/thread.php?threadid=90202. Die Treiber der Karte (dvb-s2api-liplianin) habe ich auch aus diesem Repository, da ich es nicht geschafft habe die v4l treiber selbst zu kompilieren.


    Schön,


    dann, wo iegt die .config für's vdr-xine-plugin?


    Mit welchem Benutzer wird der VDR gestartet?


    Hat der Benutzer Rechte auf die .config?


    Und wie sieht die .config aus?


    Übliche Fragen halt....


    Compiz oder sowas ist nicht installt, oder?


    Gruß
    Wolfgang

  • Erst mal Danke Wolfgang das Du dir die Zeit nimmst mir zu helfen.
    Also, meine .config liegt unter "/home/user/.xine". Gestartet wird Xine unter meinem Benutzernamen und Schreibrechte habe ich auf die "config", denn alle Änderungen die ich in der Xine Gui mache werden in die config geschrieben. Compiz ist nicht installiert. Es ist eigentlich nur eine minimalinstallation mit XFCE4. Mehr ist noch nicht hinzugekommen. Hier meine xine config:


    #
    # xine config file
    #
    .version:2


    # Entries which are still set to their default values are commented out.
    # Remove the '#' at the beginning of the line, if you want to change them.


    # Deinterlacing automatisch aktivieren
    # bool, default: 0
    #gui.deinterlace_by_default:0


    # Erfahrenheit einstellen
    # { Beginner Advanced Expert Master of the known universe }, default: 0
    gui.experience_level:Master of the known universe


    # OSD-Unterstützung aktivieren
    # bool, default: 1
    #gui.osd_enabled:1


    # OSD Anzeigezeit [s]
    # numeric, default: 3
    #gui.osd_timeout:3


    # Benutzer fragen bei Wiedergabe mit nichtunterstütztem coder
    # bool, default: 0
    #gui.play_anyway:0


    # Automatische alte Playliste wiederherstellen
    # bool, default: 0
    #gui.playlist_auto_reload:0


    # Audio-Visualisierung
    # { fftgraph goom fftscope oscope }, default: 0
    #gui.post_audio_plugin:fftgraph


    # gui skin Thema
    # { xinetic }, default: 0
    #gui.skin:xinetic


    # xine-Verhalten für unerfahrene Benutzer anpassen
    # bool, default: 1
    #gui.smart_mode:1


    # Schnappschußverzeichnis
    # string, default: /home/andy
    #gui.snapshotdir:/home/andy


    # Untertitel automatisch laden
    # bool, default: 1
    #gui.subtitle_autoload:1


    # Stil der Videoanimation
    # { None Post Plugin Stream Animation }, default: 1
    #gui.visual_anim:Post Plugin


    # Fensterüberlagerung (mehr)
    # bool, default: 0
    #gui.always_layer_above:0


    # Audiomischpultmethode
    # { Sound card Software }, default: 0
    #gui.audio_mixer_method:Sound card


    # Anzeigeverhalten von Bedienfeld
    # bool, default: 0
    #gui.auto_panel_visibility:0


    # Anzeigeverhalten des Ausgabefensters
    # bool, default: 0
    #gui.auto_video_output_visibility:0


    # Deinterlace-Plugin.
    # string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
    #gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1


    # Verhalten von Ereignissender
    # bool, default: 1
    #gui.eventer_sticky:1


    # Fensterüberlagerung
    # bool, default: 0
    #gui.layer_above:0


    # Unvergrößertes OSD benutzen
    # bool, default: 1
    #gui.osd_use_unscaled:1


    # Bildschirmschoner Resetintervall [s]
    # numeric, default: 10
    #gui.screensaver_timeout:10


    # Menu Tastenkürzelstil
    # { Windows style Emacs style }, default: 0
    #gui.shortcut_style:Windows style


    # Datenstrominformationen
    # bool, default: 0
    #gui.sinfo_auto_update:0


    # Skin-Server URL
    # string, default: http://xine.sourceforge.net/skins/skins.slx
    #gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx


    # Kapitelspringen
    # bool, default: 1
    #gui.skip_by_chapter:1


    # Neue Datemstromgröße verändert Ausgabefenstergröße
    # bool, default: 1
    #gui.stream_resize_window:1


    # Hinweiszeit (ms)
    # numeric, default: 5000
    #gui.tips_timeout:5000


    # gui Hinweise sichtbar
    # bool, default: 1
    #gui.tips_visible:1


    # Name des Video-Bildschirms
    # string, default:
    #gui.video_display:


    # Synchrones X-Protokoll (Fehlersuche)
    # bool, default: 0
    #gui.xsynchronize:0


    # Doppelte Größe für kleine Datemströme (Erfordert stream_resize_window)
    # bool, default: 0
    #gui.zoom_small_stream:0


    # Logo MRL
    # string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
    #gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv


    # Benutze XVidModeExtension beim Umschalten auf Vollbild
    # bool, default: 0
    #gui.use_xvidext:0


    # Höhe für Xinerama-Vollbildmodus (-8192 = automatisch)
    # numeric, default: -8192
    #gui.xinerama_fullscreen_height:-8192


    # Breite für Xinerama-Vollbildmodus (-8192 = automatisch)
    # numeric, default: -8192
    #gui.xinerama_fullscreen_width:-8192


    # X-Koordinate für Xinerama-Vollbildmodus (-8192 = automatisch)
    # numeric, default: -8192
    #gui.xinerama_fullscreen_x:-8192


    # Y-Koordinate für Xinerama-Vollbildmodus (-8192 = automatisch)
    # numeric, default: -8192
    #gui.xinerama_fullscreen_y:-8192


    # Zu nutzende Bildschirme im Xinerama Vollbildmodus (z.B. 0 2 3)
    # string, default: 0 1
    #gui.xinerama_use_screens:0 1


    # Verstärkungslevel
    # [0..200], default: 100
    #gui.amp_level:100


    # gui Fenster sichtbar
    # bool, default: 1
    gui.panel_visible:0


    # numeric, default: 200
    #gui.panel_x:200


    # numeric, default: 100
    #gui.panel_y:100


    # numeric, default: 80
    gui.setup_x:132


    # numeric, default: 80
    #gui.setup_y:80


    # [0..65535], default: -1
    #gui.vo_brightness:-1


    # [0..65535], default: -1
    #gui.vo_contrast:-1


    # [0..65535], default: -1
    #gui.vo_hue:-1


    # [0..65535], default: -1
    #gui.vo_saturation:-1


    gui.viewlog_x:132


    # color specification yuv-opacity
    # string, default: 8080c0-f
    #gui.osdmenu.color_focused_button:8080c0-f


    # color specification yuv-opacity
    # string, default: 808080-f
    #gui.osdmenu.color_focused_slider:808080-f


    # color specification yuv-opacity
    # string, default: ff8080-f
    #gui.osdmenu.color_focused_slider_knob:ff8080-f


    # color specification yuv-opacity
    # string, default: 808080-f
    #gui.osdmenu.color_focused_text_border:808080-f


    # color specification yuv-opacity
    # string, default: ff8080-f
    #gui.osdmenu.color_focused_text_foreground:ff8080-f


    # color specification yuv-opacity
    # string, default: 0080c0-f
    #gui.osdmenu.color_label_border:0080c0-f


    # color specification yuv-opacity
    # string, default: c08080-f
    #gui.osdmenu.color_label_foreground:c08080-f


    # color specification yuv-opacity
    # string, default: 0080c0-f
    #gui.osdmenu.color_label_window:0080c0-f


    # color specification yuv-opacity
    # string, default: 008000-f
    #gui.osdmenu.color_slider:008000-f


    # color specification yuv-opacity
    # string, default: ffff00-f
    #gui.osdmenu.color_slider_knob:ffff00-f


    # color specification yuv-opacity
    # string, default: 008000-f
    #gui.osdmenu.color_text_border:008000-f


    # color specification yuv-opacity
    # string, default: ffff00-f
    #gui.osdmenu.color_text_foreground:ffff00-f


    # color specification yuv-opacity
    # string, default: 0080c0-f
    #gui.osdmenu.color_text_window:0080c0-f


    # directory a media in dvd device will be mounted
    # string, default: /dvd
    #gui.osdmenu.dvd_mountpoint:/dvd


    # Farbpalette (Vordergrund-Rand-Hintergrund) für Untertitel und OSD
    # { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
    #ui.osd.text_palette:white-black-transparent


    # Änderungen an Hardwaremixer melden
    # bool, default: 1
    #audio.alsa_hw_mixer:1


    # Zu benutzender Audiotreiber
    # { auto null pulseaudio alsa oss jack esd none file }, default: 0
    audio.driver:alsa


    # Benutze dynamische A/52 Bereichskomprimierung
    # bool, default: 0
    #audio.a52.dynamic_range:0


    # Heruntermischen zu Zweikanal Stereo Raumklang
    # bool, default: 0
    #audio.a52.surround_downmix:0


    # A/52 Lautstärke
    # [0..200], default: 100
    #audio.a52.level:100


    # Gerät für Monoausgabe
    # string, default: default
    #audio.device.alsa_default_device:default


    # Gerät für Stereoausgabe
    # string, default: plug:front:default
    audio.device.alsa_front_device:default


    # ALSA Mixergerät
    # string, default: PCM
    #audio.device.alsa_mixer_name:PCM


    # Soundkarte unterstützt mmap
    # bool, default: 0
    #audio.device.alsa_mmap_enable:0


    # Gerät für 5.1-Kanalausgabe
    # string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
    audio.device.alsa_passthrough_device:hw:0,0


    # Gerät für 4-Kanalausgabe
    # string, default: plug:surround40:0
    #audio.device.alsa_surround40_device:plug:surround40:0


    # Gerät für 5.1-Kanalausgabe
    # string, default: plug:surround51:0
    audio.device.alsa_surround51_device:hw:0,0


    # Lautsprecherplazierung
    # { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
    audio.output.speaker_arrangement:Pass Through


    # Versatz für digitales Passthrough
    # numeric, default: 0
    #audio.synchronization.passthrough_offset:0


    # Audiowiedergabe während langsamer/schneller Geschwindigkeit
    # bool, default: 0
    #audio.synchronization.slow_fast_audio:0


    # Methode für Audio/Videosynchronisation
    # { metronom feedback resample }, default: 0
    #audio.synchronization.av_sync_method:metronom feedback


    # Wenn !=0, immer auf diese Rate anpassen
    # numeric, default: 0
    #audio.synchronization.force_rate:0


    # Resampling benutzen
    # { auto off on }, default: 0
    #audio.synchronization.resample_mode:auto


    # Startlautstärke
    # [0..100], default: 50
    #audio.volume.mixer_volume:50


    # Lautstärke beim Starten wiederherstellen
    # bool, default: 0
    #audio.volume.remember_volume:0


    # Zu benutzender Videotreiber
    # { auto vdpau aadxr3 dxr3 xv opengl raw xshm aa caca none xxmc sdl vidixfb vidix fb xvmc }, default: 0
    video.driver:vdpau


    # Alle Videoskalierungen deaktivieren
    # bool, default: 0
    #video.output.disable_scaling:0


    # Horizontale Bildposition im Ausgabefenster
    # [0..100], default: 50
    #video.output.horizontal_position:50


    # vdpau: HD deinterlace method
    # { bob half temporal half temporal_spatial temporal temporal_spatial }, default: 3
    video.output.vdpau_deinterlace_method:bob


    # vdpau: Try to recreate progressive frames from pulldown material
    # bool, default: 1
    #video.output.vdpau_enable_inverse_telecine:1


    # vdpau: disable deinterlacing when progressive_frame flag is set
    # bool, default: 0
    #video.output.vdpau_honor_progressive:0


    # vdpau: restrict enabling video properties for SD video only
    # { none noise sharpness noise+sharpness }, default: 0
    #video.output.vdpau_sd_only_properties:none


    # vdpau: disable advanced deinterlacers chroma filter
    # bool, default: 0
    #video.output.vdpau_skip_chroma_deinterlace:0


    # Vertikale Bildposition im Ausgabefenster
    # [0..100], default: 50
    #video.output.vertical_position:50


    # default length of display queue
    # numeric, default: 2
    #video.output.vdpau_display_queue_length:2


    # Choose speed over specification compliance
    # bool, default: 0
    #video.processing.ffmpeg_choose_speed_over_accuracy:0


    # Qualität der MPEG-4 Nachbearbeitungsstufe
    # [0..6], default: 3
    #video.processing.ffmpeg_pp_quality:3


    # Skip loop filter
    # { default none nonref bidir nonkey all }, default: 0
    #video.processing.ffmpeg_skip_loop_filter:default


    # FFmpeg video decoding thread count
    # numeric, default: 1
    video.processing.ffmpeg_thread_count:4


    # Gerät für CD-Audio
    # string, default: /dev/cdrom
    #media.audio_cd.device:/dev/cdrom


    # Laufwerk auf diesen Faktor verlangsamen
    # numeric, default: 4
    #media.audio_cd.drive_slowdown:4


    # CDDB abfragen
    # bool, default: 1
    #media.audio_cd.use_cddb:1


    # CDDB Serverport
    # numeric, default: 8880
    #media.audio_cd.cddb_port:8880


    # CDDB Servername
    # string, default: freedb.freedb.org
    #media.audio_cd.cddb_server:freedb.freedb.org


    # Pfad zum Sichen von Datenströmen
    # string, default:
    #media.capture.save_dir:


    # Nummer der zu benutzenden DVB-Karte.
    # numeric, default: 0
    #media.dvb.adapter:0


    # Zuletzt gesehenen DVB-Kanal vermerken
    # bool, default: 1
    #media.dvb.remember_channel:1


    # Number of seconds until tuning times out.
    # numeric, default: 0
    #media.dvb.tuning_timeout:0


    # Enable the DVB GUI
    # bool, default: 1
    #media.dvb.gui_enabled:1


    # Zuletzt gesehener DVB-Kanal
    # numeric, default: -1
    #media.dvb.last_channel:-1


    # Standardsprache für die DVD-Wiedergabe
    # string, default: en
    #media.dvd.language:en


    # Region (1-8), aus der der DVD Player zu kommen scheint
    # numeric, default: 1
    #media.dvd.region:1


    # Gerät für DVD Wiedergabe
    # string, default: /dev/dvd
    #media.dvd.device:/dev/dvd


    # Vorauseilendes Caching benutzen
    # bool, default: 1
    #media.dvd.readahead:1


    # Wiedergabemodus falls Titel/Kapitel angegeben
    # { entire dvd one chapter }, default: 0
    #media.dvd.play_single_chapter:entire dvd


    # Einheit beim Suchen
    # { seek in program chain seek in program }, default: 0
    #media.dvd.seek_behaviour:seek in program chain


    # Einheit für die Überspringen-Aktion
    # { skip program skip part skip title }, default: 0
    #media.dvd.skip_behaviour:skip program


    # Startverzeichnis für Dateisuche
    # string, default: /home/andy/scripte
    media.files.origin_path:/home/andy/DVD


    # Versteckte Dateien anzeigen
    # bool, default: 0
    #media.files.show_hidden_files:0


    # Netzwerkbandbreite
    # { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) }, default: 10


    # Zeitüberschreitung für Netzwerkdatenströme (in Sekunden)
    # numeric, default: 30
    #media.network.timeout:30


    # Domains, die den HTTP Proxy umgehen
    # string, default:
    #media.network.http_no_proxy:


    # HTTP Proxy Rechnername
    # string, default:
    #media.network.http_proxy_host:


    # HTTP Proxy Passwort
    # string, default:
    #media.network.http_proxy_password:


    # HTTP Proxy Portnummer
    # numeric, default: 80
    #media.network.http_proxy_port:80


    # HTTP Proxy Benutzername
    # string, default:
    #media.network.http_proxy_user:


    # MMS-Protokoll
    # { auto TCP HTTP }, default: 0
    #media.network.mms_protocol:auto


    # Automatisch Spur/Eintrag weiterschalten bei VCDs
    # bool, default: 1
    #media.vcd.autoadvance:1


    # Standardlaufwerk für VCD bei automatischer Wiedergabe
    # { MPEG track entry segment playback-control item }, default: 3
    #media.vcd.autoplay:playback-control item


    # VCD Positionierungsbereich
    # { auto track entry }, default: 0
    #media.vcd.length_reporting:auto


    # 'Ablegehnte' VCD LIDs anzeigen
    # bool, default: 0
    #media.vcd.show_rejected:0


    # Formatvorlage für Kommentarfeld eines VCD Datenstroms.
    # string, default: %P - Track %T
    #media.vcd.comment_format:%P - Track %T


    # Bitfeld für VCD Fehlersuche
    # numeric, default: 0
    #media.vcd.debug:0


    # Gerät für VCD Wiedergabe
    # string, default: /dev/cdrom
    #media.vcd.device:/dev/cdrom


    # Formatvorlage für Fenstertitle bei VCDs
    # string, default: %F - %I %N%L%S, disk %c of %C - %v %A
    #media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A


    # v4l ALSA audio input device
    # string, default: plughw:0,0
    #media.video4linux.audio_device:plughw:0,0


    # Pfad zum V4L Radiogerät
    # string, default: /dev/radio0
    #media.video4linux.radio_device:/dev/radio0


    # Pfad zum V4L Videogerät
    # string, default: /dev/video0
    #media.video4linux.video_device:/dev/video0


    # v4l TV standard
    # { AUTO PAL NTSC SECAM OLD }, default: 0
    #media.video4linux.tv_standard:AUTO


    # Gerät für WinTV-PVR 250/350 (PVR) Plugin
    # string, default: /dev/video0
    #media.wintv_pvr.device:/dev/video0


    # default VDR host
    # string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
    #media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block


    # Fast (low-quality) OSD scaling
    # bool, default: 0
    #media.xvdr.fast_osd_scaling:0


    # number of buffers for HD content
    # numeric, default: 2500
    #media.xvdr.num_buffers_hd:2500


    # SRC tuning step
    # numeric, default: 5000
    #media.xvdr.scr_tuning_step:5000


    # Smoother SRC tuning
    # bool, default: 0
    #media.xvdr.smooth_scr_tuning:0


    # Pfad zum Real-Player-Codecs
    # string, default:
    #decoder.external.real_codecs_path:


    # Pfad zu win32-Codecs
    # string, default: /usr/lib/codecs
    #decoder.external.win32_codecs_path:/usr/lib/codecs


    # opacity for the black parts of bitmapped subtitles
    # [0..100], default: 67
    #subtitles.bitmap.black_opacity:67


    # opacity for the colour parts of bitmapped subtitles
    # [0..100], default: 100
    #subtitles.bitmap.colour_opacity:100


    # Untertitelgröße
    # { tiny small normal large very large huge }, default: 1
    #subtitles.separate.subtitle_size:small


    # Vertikaler Versatz für Untertitel
    # numeric, default: 0
    #subtitles.separate.vertical_offset:0


    # Zeichensatz für Untertitel
    # string, default: sans
    #subtitles.separate.font:sans


    # Zeichensatz für Untertitel
    # string, default:
    #subtitles.separate.font_freetype:


    # ob Freetype-Zeichensätze genutzt werden
    # bool, default: 0
    #subtitles.separate.font_use_freetype:0


    # Zeichenkodierung für Untertitel
    # string, default: iso-8859-1
    #subtitles.separate.src_encoding:iso-8859-1


    # Benutze unskaliertes OSD falls möglich
    # bool, default: 1
    #subtitles.separate.use_unscaled_osd:1


    # Zu generierende Bilder/Sekunde
    # numeric, default: 14
    #effects.goom.fps:14


    # Goom Bildhöhe
    # numeric, default: 240
    #effects.goom.height:240


    # Goom Bildbreite
    # numeric, default: 320
    #effects.goom.width:320


    # Farbraumkonvertierungsmethode
    # { Fast but not photorealistic Slow but looks better }, default: 0
    #effects.goom.csc_method:Fast but not photorealistic


    # Anzahl der Audiopuffer
    # numeric, default: 230
    engine.buffers.audio_num_buffers:1500


    # Anzahl der Videopuffer
    # numeric, default: 500
    engine.buffers.video_num_buffers:1300


    # Standardanzahl von Videobildern
    # numeric, default: 15
    engine.buffers.video_num_frames:22


    # Priorität für Dekoder a/52
    # numeric, default: 0
    #engine.decoder_priorities.a/52:0


    # Priorität für Dekoder bitplane
    # numeric, default: 0
    #engine.decoder_priorities.bitplane:0


    # Priorität für Dekoder dts
    # numeric, default: 0
    #engine.decoder_priorities.dts:0


    # Priorität für Dekoder dvaudio
    # numeric, default: 0
    #engine.decoder_priorities.dvaudio:0


    # Priorität für Dekoder dxr3-mpeg2
    # numeric, default: 0
    #engine.decoder_priorities.dxr3-mpeg2:0


    # Priorität für Dekoder dxr3-spudec
    # numeric, default: 0
    #engine.decoder_priorities.dxr3-spudec:0


    # Priorität für Dekoder faad
    # numeric, default: 0
    #engine.decoder_priorities.faad:0


    # Priorität für Dekoder ffmpeg-wmv8
    # numeric, default: 0
    #engine.decoder_priorities.ffmpeg-wmv8:0


    # Priorität für Dekoder ffmpeg-wmv9
    # numeric, default: 0
    #engine.decoder_priorities.ffmpeg-wmv9:0


    # Priorität für Dekoder ffmpegaudio
    # numeric, default: 0
    #engine.decoder_priorities.ffmpegaudio:0


    # Priorität für Dekoder ffmpegvideo
    # numeric, default: 0
    #engine.decoder_priorities.ffmpegvideo:0


    # Priorität für Dekoder gdkpixbuf
    # numeric, default: 0
    #engine.decoder_priorities.gdkpixbuf:0


    # Priorität für Dekoder gsm610
    # numeric, default: 0
    #engine.decoder_priorities.gsm610:0


    # Priorität für Dekoder image
    # numeric, default: 0
    #engine.decoder_priorities.image:0


    # Priorität für Dekoder mad
    # numeric, default: 0
    #engine.decoder_priorities.mad:0


    # Priorität für Dekoder mpc
    # numeric, default: 0
    #engine.decoder_priorities.mpc:0


    # Priorität für Dekoder mpeg2
    # numeric, default: 0
    #engine.decoder_priorities.mpeg2:0


    # Priorität für Dekoder nsfdec
    # numeric, default: 0
    #engine.decoder_priorities.nsfdec:0


    # Priorität für Dekoder pcm
    # numeric, default: 0
    #engine.decoder_priorities.pcm:0


    # Priorität für Dekoder qta
    # numeric, default: 0
    #engine.decoder_priorities.qta:0


    # Priorität für Dekoder qtv
    # numeric, default: 0
    #engine.decoder_priorities.qtv:0


    # Priorität für Dekoder realadec
    # numeric, default: 0
    #engine.decoder_priorities.realadec:0


    # Priorität für Dekoder realvdec
    # numeric, default: 0
    #engine.decoder_priorities.realvdec:0


    # Priorität für Dekoder rgb
    # numeric, default: 0
    #engine.decoder_priorities.rgb:0


    # Priorität für Dekoder speex
    # numeric, default: 0
    #engine.decoder_priorities.speex:0


    # Priorität für Dekoder spucc
    # numeric, default: 0
    #engine.decoder_priorities.spucc:0


    # Priorität für Dekoder spucmml
    # numeric, default: 0
    #engine.decoder_priorities.spucmml:0


    # Priorität für Dekoder spudec
    # numeric, default: 0
    #engine.decoder_priorities.spudec:0


    # Priorität für Dekoder spudvb
    # numeric, default: 0
    #engine.decoder_priorities.spudvb:0


    # Priorität für Dekoder spuhdmv
    # numeric, default: 0
    #engine.decoder_priorities.spuhdmv:0


    # Priorität für Dekoder sputext
    # numeric, default: 0
    #engine.decoder_priorities.sputext:0


    # Priorität für Dekoder theora
    # numeric, default: 0
    #engine.decoder_priorities.theora:0


    # Priorität für Dekoder vdpau_h264
    # numeric, default: 0
    #engine.decoder_priorities.vdpau_h264:0


    # Priorität für Dekoder vdpau_mpeg12
    # numeric, default: 0
    #engine.decoder_priorities.vdpau_mpeg12:0


    # Priorität für Dekoder vdpau_vc1
    # numeric, default: 0
    #engine.decoder_priorities.vdpau_vc1:0


    # Priorität für Dekoder vorbis
    # numeric, default: 0
    #engine.decoder_priorities.vorbis:0


    # Priorität für Dekoder wavpackdec
    # numeric, default: 0
    #engine.decoder_priorities.wavpackdec:0


    # Priorität für Dekoder win32a
    # numeric, default: 0
    #engine.decoder_priorities.win32a:0


    # Priorität für Dekoder win32v
    # numeric, default: 0
    #engine.decoder_priorities.win32v:0


    # Priorität für Dekoder yuv
    # numeric, default: 0
    #engine.decoder_priorities.yuv:0


    # Medienformaterkennungsstrategie
    # { default reverse content extension }, default: 0
    #engine.demux.strategy:default


    # xines Methode zum Kopieren von Speicher
    # { probe libc kernel mmx mmxext sse }, default: 0
    engine.performance.memcpy_method:mmxext


    # Erlaubter Prozentsatz für verworfene Frames
    # numeric, default: 10
    #engine.performance.warn_discarded_threshold:10


    # Erlaubter Prozentsatz für übersprungene Frames
    # numeric, default: 10
    #engine.performance.warn_skipped_threshold:10


    # Erlaube implizierte Änderungen an Konfiguration (z.B. durch MRL)
    # bool, default: 0
    #misc.implicit_config:0

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

  • Hi nochmal,


    schau dich mal auf meiner Webseite um, da gibt's noch ein paar Tip's zur .config.


    Bei einer 9400er empfiehlt sich in der .config:



    So habe ich das hier laufen, allerdings mit den originalen xine-vdpau-r286-Sourcen.


    Der letzte Paramter ist wichtig, vor allem bei neueren nvidia-Treibern ab 190.53.


    PS: Noch eins, bist du sicher dass die 50 Hz auch ankommen/ziehen => im Log des X-Servers kontrolliert?


    Gruß
    Wolfgang

  • Ok. Habe Deine Werte mal übernommen, ohne Erfolg. Habe mir jetzt mal ne ganze Weile AstraHD angeschaut und es ruckelt immer an den gleichen Stellen. Die Vorschau für HD+ (RTL, ProSieben u.s.w.) ruckelt gar nicht. Kommt aber mehr Bildinhalt (die Tiere z.b.) ruckelt es. Deswegen denke ich das halt wirklich die Grafikkarte überfordert ist, was ärgerlich ist, denn ich hatte sie extra deswegen gekauft. Ich überlege jetzt noch ob es sinn macht andere Treiber für die TT S2-1600 zu testen, weil ich teilweise kein Bild nach dem Umschalten auf andere Sender habe und erst einmal vor und wieder zurückschalten muss.

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

  • Hi nochmal,


    also mit den Werten sollte das sauber laufen.


    Hast du schon mal das Log kontrolliert, ob das auch wirklich ankommt?


    Welchen nvidia-treiber nutzt du?


    Nicht so schnell aufgeben, logs lesen ist hier wichtig....


    Nochmal die Frage, kommen die 50 Hz an? => xorg.log


    Mit Deinterlacer=bob kannst du die Grafikkarte nicht überfordern!


    Gruß
    Wolfgang

  • Hi Astra,


    teste mal die config für das Xine Plugin aus dem Thread: http://www.htpc-forum.de/forum/index.php?showtopic=6411&st=0&#entry40765


    Hatte bei mir den erhofften Erfolg gebracht. :)

  • Ok, dann habe ich noch Hoffnung.
    Nvidia 195.30


    Xorg log:


    X.Org X Server 1.6.4
    Release Date: 2009-9-27
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
    Current Operating System: Linux htpc 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=9df17450-4977-479f-ad18-92c4417d99ef ro quiet splash
    Build Date: 26 October 2009 05:15:02PM
    xorg-server 2:1.6.4-2ubuntu4 (buildd@)
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 9 11:23:18 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (**) Option "Xinerama" "0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is disabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling Mouse0
    (II) Loader magic: 0x3bc0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7


    (--) PCI:*(0:1:0:0) 10de:065b:1043:82f8 nVidia Corporation G96 [GeForce 9400 GT] rev 161, Mem @ 0xc2000000/16777216, 0xa0000000/536870912, 0xc0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 195.30 Fri Dec 18 14:21:29 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 195.30 Fri Dec 18 13:43:18 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "TwinView" "0"
    (**) NVIDIA(0): Option "MetaModes" "1920x1080_50 +0+0"
    (**) Jan 09 11:23:18 NVIDIA(0): Enabling RENDER acceleration
    (II) Jan 09 11:23:18 NVIDIA(0): NVIDIA GPU GeForce 9400 GT (G96) at PCI:1:0:0 (GPU-0)
    (--) Jan 09 11:23:18 NVIDIA(0): Memory: 524288 kBytes
    (--) Jan 09 11:23:18 NVIDIA(0): VideoBIOS: 62.94.71.00.13
    (II) Jan 09 11:23:18 NVIDIA(0): Detected PCI Express Link width: 16X
    (--) Jan 09 11:23:18 NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) Jan 09 11:23:18 NVIDIA(0): Connected display device(s) on GeForce 9400 GT at PCI:1:0:0:
    (--) Jan 09 11:23:18 NVIDIA(0): Panasonic-TV (DFP-1)
    (--) Jan 09 11:23:18 NVIDIA(0): Panasonic-TV (DFP-1): 165.0 MHz maximum pixel clock
    (--) Jan 09 11:23:18 NVIDIA(0): Panasonic-TV (DFP-1): Internal Single Link TMDS
    (II) Jan 09 11:23:18 NVIDIA(0): Assigned Display Device: DFP-1
    (II) Jan 09 11:23:18 NVIDIA(0): Validated modes:
    (II) Jan 09 11:23:18 NVIDIA(0): "1920x1080_50+0+0"
    (II) Jan 09 11:23:18 NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    (WW) Jan 09 11:23:19 NVIDIA(0): Panasonic-TV (DFP-1)'s EDID does not contain a maximum image
    (WW) Jan 09 11:23:19 NVIDIA(0): size; cannot compute DPI from Panasonic-TV (DFP-1)'s
    (WW) Jan 09 11:23:19 NVIDIA(0): EDID.
    (==) Jan 09 11:23:19 NVIDIA(0): DPI set to (75, 75); computed from built-in default
    (==) Jan 09 11:23:19 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
    (II) Jan 09 11:23:19 NVIDIA(0): Initialized GPU GART.
    (II) Jan 09 11:23:19 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) Jan 09 11:23:19 NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) Jan 09 11:23:19 NVIDIA(0): configuration option may not be set correctly. When the
    (II) Jan 09 11:23:19 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) Jan 09 11:23:19 NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) Jan 09 11:23:19 NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) Jan 09 11:23:19 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) Jan 09 11:23:19 NVIDIA(0): Config Options in the README.
    (II) Jan 09 11:23:19 NVIDIA(0): Setting mode "1920x1080_50+0+0"
    (II) Loading extension NV-GLX
    (II) Jan 09 11:23:19 NVIDIA(0): Initialized OpenGL Acceleration
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) Jan 09 11:23:19 NVIDIA(0): Initialized X Rendering Acceleration
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Power Button
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.4, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event1"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_options" "lv3:ralt_switch"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event0"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_options" "lv3:ralt_switch"
    (II) config/hal: Adding input device RF-Dongle
    (**) RF-Dongle: always reports core events
    (**) RF-Dongle: Device: "/dev/input/event4"
    (II) RF-Dongle: Found 9 mouse buttons
    (II) RF-Dongle: Found x and y relative axes
    (II) RF-Dongle: Found scroll wheel(s)
    (II) RF-Dongle: Found keys
    (II) RF-Dongle: Configuring as mouse
    (II) RF-Dongle: Configuring as keyboard
    (**) RF-Dongle: YAxisMapping: buttons 4 and 5
    (**) RF-Dongle: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "RF-Dongle" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_options" "lv3:ralt_switch"
    (**) RF-Dongle: (accel) keeping acceleration scheme 1
    (**) RF-Dongle: (accel) filter chain progression: 2.00
    (**) RF-Dongle: (accel) filter stage 0: 20.00 ms
    (**) RF-Dongle: (accel) set acceleration profile 0
    (II) RF-Dongle: initialized for relative axes.
    (II) config/hal: Adding input device RF-Dongle
    (**) RF-Dongle: always reports core events
    (**) RF-Dongle: Device: "/dev/input/event3"
    (II) RF-Dongle: Found keys
    (II) RF-Dongle: Configuring as keyboard
    (II) XINPUT: Adding extended input device "RF-Dongle" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_options" "lv3:ralt_switch"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

  • Zitat

    Original von Uwe
    Hi Astra,


    teste mal die config für das Xine Plugin aus dem Thread: http://www.htpc-forum.de/forum/index.php?showtopic=6411&st=0&#entry40765


    Hatte bei mir den erhofften Erfolg gebracht. :)


    Hallo Uwe,


    der Link ist nur für registrierte beta-Tester zu sehen.


    Ausserdem ist der half-Modus nicht zu empfehlen, 25p-Ausgabe.


    Die Frage ist zusätzlich, warum dieser Parameter nicht in der .config auftaucht:


    Code
    video.output.vdpau_display_queue_length=4


    Gruß
    Wolfgang

  • Zitat

    Original von wbreu
    Die Frage ist zusätzlich, warum dieser Parameter nicht in der .config auftaucht:


    Code
    video.output.vdpau_display_queue_length=4


    Gruß
    Wolfgang


    Hallo Wolfgang,


    diese Zeile ist bei ihm noch auskommentiert und steht auf 2.
    Ich wollte ihm auch gerade diesen Tip geben ;)


    Gruß
    SieDu


  • Jepp hast recht,


    meine Augen werden auch immer schlimmer....


    Gruß
    Wolfgang

  • Zitat

    video.output.vdpau_display_queue_length=4



    Gemacht, ohne Erfolg. Ich werde jetzt nochmal nen anderen Nvidia Treiber testen. Mal sehen, vielleicht bringt es was.

    RPI3, DVB-Sky S960, VDR 2.4.4, Raspbian Jessie, Onkyo AV Receiver, Panasonic Plasma.

  • Ich hätte da nochmal ähnliche Probleme mit meiner 9300 und dem 190,53.
    Habe einige Tips schon versucht umzusetzen - wie kann ich sehen ob 60 oder 50 hz am TV ankommen. Der TV zeigt das nicht an.
    Anbei
    conf und log


    TV: Sony kdl-40z4500


    Danke im Voraus


  • Hi,


    bei so einer config, speziell xorg.conf, kommt immer der default-Mode deines Displays zum Einsatz.


    Dazu solltest du halt mal deine Anleitung zum Display anschauen, was da drinnen steht.


    Ansonsten der X-server mit --logverbose 6 starten.


    So wie jetzt kann man da nix sagen, anhand der Logs.


    Mach bitte einen eigenen Thread auf, der hier geht um was anderes....


    Gruß
    Wolfgang

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!