something more strange is if i go to vdr admin a make any one i want
only on control by remote dont work
something more strange is if i go to vdr admin a make any one i want
only on control by remote dont work
ZitatAuf diesen Beitrag antworten Zitatantwort auf diesen Beitrag erstellen Diesen Beitrag editieren/löschen Diesen Beitrag einem Moderator melden Zum Anfang der Seite springen hi all any one have try to make a timerrecord for me it crash
Same for me in the beginning.
I had to recompile a few plugins and the problem was gone.
I don't remeber exactly which one.
Try epgtimers, epgsearch or extrecmenu.
Hallo Galaga,
habe meinen reelvdr nun auch in eine Activy 300 verfrachtet,
nur leider funktionieren das Display und die FB nicht.
Im Display steht nur LOADING...
Das alcd-plugin habe ich aktiviert
bei der FB funktioniert nur die Powertaste.
Gibt es noch etwas zu beachten ?
Gruß e485s
Hast Du die Anweisungen im ersten Post beachtet?
Also das alcd runtergeladen compiliert und dann das Actiy-Tar-File ausgepackt.
Dann sollten alcd und Fernbedienung funktionieren.
Ich denke ich habe alles richtig gemacht. Das Log saget:
Dec 1 19:53:24 ReelBox vdr: [30118] starting plugin: alcd
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <8900>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <3539>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <8a00>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <3539>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9403>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <0000>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9412>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <be08>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <f000>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <be08>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <8100>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c1b5>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9004>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c1b5>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9002>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c1b5>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9008>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c0b5>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9b00>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c0b5>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9a02>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c1b5>
Dec 1 19:53:24 ReelBox vdr: [30118] Failing Text < > - 23
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: Failing Command: <9a03>
Dec 1 19:53:24 ReelBox vdr: [30118] alcd-plugin: ResCode: -1 <c1b5>
Dec 1 19:53:24 ReelBox vdr: [30118] Failing Text < > - 23
Dec 1 19:53:24 ReelBox vdr: [30118] activyLCD: Set Text failed - assuming no LCD available
Das Display funktioniert, habs mit gen2vdr AE getestet.
Gruß e485s
Kingt nach einem Rechteproblem?!
Wenn das jetzt Slackware wäre würde ich dir jetzt sagen, das du den User VDR in die Gruppe dialout stecken musst.
So meine FB funktioniert, nur leider nicht alle Tasten.
Galaga könntest Du mir Deine remote.conf mal zukommen lassen ?
Copperhead
an den Rechten liegt es nicht glaube ich ,der VDR läuft als root.
Gruß e485s
Du kannst Dir Deine eigene remote.conf ganz leicht selbst erstellen, wie im ersten Post beschrieben:
ZitatUm die Tasten neu anzulernen in der \etc\vdr\remote.conf die Lirc-Befehle löschen. Aber nur das Kommando hinter LIRC...
Die Zeile an sich muss drin bleiben.
z.B. aus "LIRC.Up up" wird nur noch "LIRC.Up"
Nach dem Neustart des VDR kann neu angelernt werden.
Hallo Galaga, leider läßt sich der VDR
nicht dazu bewegen, die FB neuanzulernen.
Im Log steht zwar remote control LIRC - learning keys
aber auf dem Fernseher wird nix angezeigt.
Der VDR startet dann ganz normal ohne FB.
Das Display funktioniert leider auch noch nicht (nur LOADING...)
Wie sieht es bei Dir mit dem Display aus muss ich etwas beachten damit es funktioniert ?
Gruß e485s
Schick mir mal Deine E-mail per PM. Dann schick ich Dir die remote.conf und libvdr-alcd.
... bzw. remote.conf kann ich auch hochladen.
Bitteschön.
Nö, nicht viel.
Hast Du mal in den Einstellungen des Plugins nachgeschaut.
Es kann auch da abgeschaltet sein.
Geht die Fernbedienung jetzt?
Does anyone have a new channels.conf entry for ARTE HD?
I don't have a picture on this channel.
ZitatOriginally posted by Galaga
Does anyone have a new channels.conf entry for ARTE HD?
I don't have a picture on this channel.
hi galaga
this one are working for me
arte HD;ZDFvision:11361:hC23M5O35S1:S19.2E:22000:6210=27:6221=deu,6222=fra;6220=deu:6230:0:11120:1:1011:0
hi
theres a new dvd stable version
any one have tested this one???
theres any patch for that one??
No, and I don't want to disturb the family peace during the chrismas holidays by wrecking my installation
Merry christmas,
Sascha
Hi there,
Note: I use 2x Nova S2, ehd, AMC 330.
I run tests last week and I tried to install with both factory DVDs, October 19th and December 17th. Unfortunately I already failed whilst compiling the driver. Various compile errors (missing sem.h, connex.o not supported for kernel < 2.6.26, etc.).
Today I have taken another trial, with actual v4l-dvb of course ;-). Compilation runs with both DVDs like a charm. However, if I reboot the machine, it hangs with kernel oops. It comes back to life if I add cx8800, cx8802, cx88-alsa to /etc/modprobe.d/blacklist. It looks like something has happen with the driver during the last days. It compiles but does not run ;D.
Anyway, I came across the information that all relevant drivers for my DVB cards are compiled into the standard kernel (for Ubuntu ?) as of version 2.6.28. So I installed it according to a thread from reel forum. It has been made available to fight Reel's deep standby problem. I followed the installation described here: http://reelbox-forum.com/showpost.php?p=155514&postcount=421.
Additionally I
- installed activy remote
- had to copy diseq.conf.sample to diseq.conf (to avoid "channel not available" messages)
- copied the dvb-fw for cx24116 to /lib/firmware. (just to be sure)
- removed mcli from boot sequence (to allow initial setup to complete, otherwise it hangs, searching for netceiver?)
- deleted dvbloop from /etc/modules (to allow initial setup to complete, otherwise it hangs, searching for netceiver?)
- did not patch and recompile VDR itself so far.
At the moment my system is up and running, with the factory DVD from December 17th. And SD is working just fine. Same for photos, mp3
Next I will test HD capabilites and will enable ALCD. Videotext is not yet working. Same for channelscan: Plugin is available, however, no DVB device detected?
hi
i have update my reelvdr for the last stable version an all works fine
i use a patch from YURI posted on anorher forum and it works fine.
i let here the last patch i use it and hop YURI not mind about it
scubidoo
...i have update my reelvdr for the last stable version an all works fine
i use a patch from YURI posted on anorher forum and it works fine.
i let here the last patch i use it and hop YURI not mind about it
...
can you see HDTV with the new patch?
i compiled "everything" but i don't get a HDTV picture.
Do you use the HDTV channels.conf from the 1.side?
greetings
Birdy
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!