HOWTO: ReelVDR installieren für Activy mit eHD

  • Hallo Kollegen,


    Wie versprochen versuche ich mich mal an einem HOWTO zur Installation des ReelVDR für eHD und normale S2-karten.


    Meiner Meinung nach ist das für eHD-Besitzer die bessere Lösung als VDR 1.7.x, da man für die Reel-VDR-Version zumindest einen gewissen Support von Reel hat.
    Meine Activy läuft damit jetzt fast wie eine richtige Reelbox.


    Update
    The main language of this thread is now english because the developer of this patch and some of our users don't speak german. I will change the HOWTO asap.


    There is a new patch from Yuri666 for the stable from 08.10.:
    http://www.vdr-portal.de/board…nt.php?attachmentid=23251
    Is is also working in a mixed setup with DVB-S and DVB-T. So there is no need for the old multiproto patch any more.


    The new image is based on Ubuntu 8.04 insteed of Ubuntu 7.10.


    [I]Nur eine Warnung vorweg:
    Einige Schritte, z.B. die Anpassung von /usr/sbin/mvdrshutdown, /etc/acpi/powerbtn.sh und das neu patchen und neu kompilieren des VDR müssen nach jedem Software-Update des Reel-VDRs gemacht werden.
    Deshalb gehe ich auch auf den Stable-Zweig von Reel (da passiert nicht allzu oft etwas :unsch).


    Da ich ein paar Links auf das Reelbox-Forum machen werde, für das man zum Lesen einen User braucht, würde ich erst mal jedem empfehlen, einen solchen dort anzulegen.


    Die Ergebnisse beruhen nicht alleine auf meinem Mist, sondern auf der Arbeit von diversen Leuten, die mehr dafür geleistet haben, z.B. beta, Yuri666, cinfo, Birdy ...


    Und es kann auch sein, daß ich was vergesse, weil ich nicht komplett bei Null angefangen hab, sondern schon was Halbfertiges von Birdy bekommen hatte.
    Einiges ist also nur aus dem Gedächtnis aufgeschrieben.
    Ich bitte mangelndes Linux-Know-How im Vorraus zu entschuldigen. Korrektur-Hinweise bitte hier posten.


    Wenn was fehlt, kann es meist mit apt-get nachinstalliert werden.
    z.B. für hg


    Code
    apt-get install hg


    Aber nun erst mal los:


    Installation


    Du besorgst Dir hier http://www.reel-multimedia.com/de/suppor...re_updates.html das Factory Image.


    Dann baust Du die Platte aus der Activy in ein externes USB-Gehäuse, suchst Dir nen zweiten Rechner (ohne SATA, da das Image immer sda komplett platt macht), bootest das Factory-Image und läßt die externe Platte davon neu bespielen.


    Die Platte muß mindestens 320GB groß sein, sonst meckert das Image.
    Ist sie kleiner geht es auch, dann mußt Du nur selbst die Partitionen anlegen wie hier beschrieben (nicht selbst getestet)


    http://reelbox-forum.com/showthread.php?t=16018&highlight=installieren+festplatte&page=4


    Ist sie größer solltest Du noch die Video-Partition mit nem Linux-Livesystem und parted auf die volle Plattengröße anpassen.


    Dann kannst Du die Platte zurückbauen und ReelVDR sollte booten.


    Falls die Image-DVD beim Start von Clonezilla beim Treiber s626 hängen bleibt, müssen zur Installation die DVB-Karten ausgebaut werden.
    Nach der Installation des Image können Sie wieder eingebaut werden.


    Mich hat ein wenig irritiert, daß unter ReelVDR meine ganz normale IDE-Platte als /dev/sda auftaucht. Aber was soll's.


    Alternativ kann man wohl auch ein blankes Ubuntu 7.10 installieren (Version ist wichtig) und dann den ganzen Reel-Kram als Package nachladen (auch nicht selbst getestet)


    Code
    echo "deb http://reelbox.org/software/rubuntu 710 stable stable-opt all" > /etc/apt/sources.list.d/reel.list
    aptitude update
    aptitude install rubuntu-standard


    Jetzt sollte der ReelVDR laufen. Per normalem Telnet kommt man mit User und Passwort root drauf.


    DVB-Treiber installieren


    Ich hab alle Sourcen immer im Verzeichnis /home/reel ausgepackt.


    So kann der S2API-Treiber installiert werden:


    Code
    cd /home/reel
    hg clone http://linuxtv.org/hg/v4l-dvb
    cd v4l-dvb
    make
    make install
    reboot


    Für HDTV muss der VDR noch neu kompiliert und gepatch werden.


    VDR neu komipilieren für HDTV


    Patch für S2API anwenden:


    Code
    cd /home/reel
    svn checkout svn://reelbox.org/stable
    cd stable/src/vdr-1.4
    wget http://www.vdr-portal.de/board/attachment.php?attachmentid=23251 -O s2api_reelvdr_13762_stable.diff.bz2
    bunzip2 s2api_reelvdr_13762_stable.diff.bz2
    patch -p1 <s2api_reelvdr_13762_stable.diff


    Vor dem kompilieren den DVB-Treiber eintragen:


    Code
    cd ..
    vi Make.config


    "DVBDIR =" suchen und überall die DVB-Treiber-Sourcen eintragen


    Code
    #DVBDIR   = ../kernel/linux-2.6.22
            DVBDIR   = /home/reel/v4l-dvb/linux


    Dann noch einen fehlenden Link machen und compilieren


    Code
    cp /usr/src/linux-headers-$(uname -r)/include/linux/compiler.h /home/reel/v4l-dvb/linux/include/linux
    apt-get install libmysqlXX-dev 
    cd /home/reel/stable/src/vdr-1.4
    make vdr
    /etc/init.d/reelvdr stop
    cp /usr/sbin/vdr /usr/sbin/vdr.orig
    cp vdr /usr/sbin/vdr
    /etc/init.d/reelvdr start


    Die Einträge für die HD-Programmein der channels.conf haben ein etwas anderes Format als under VDR 1.7 und der Channel-Scan funktioniert nicht, deshalb hier noch mal die Einträge für HDTV:


    Code
    ARTE HD;ZDFvision:11362:hC23M5O35S1:S19.2E:22000:6210=27:6221=deu,6222=fra;6220=deu:6230:0:11120:1:1011:0
    Das Erste HD;ARD:11362:hC23M5O35S1:S19.2E:22000:6010=27:6020=deu;6022=deu:6030:0:11100:1:1011:0
    ZDF HD;ZDFvision:11362:hC23M5O35S1:S19.2E:22000:6110=27:6120=deu;6122=deu:6130:0:11110:1:1011:0
    EinsFestival HD;ARD:12421:hC34M2O35S0:S19.2E:27500:1601=2:1602=deu;1606=deu:0:0:28396:1:1201:0
    ANIXE HD;BetaDigital:11302:hC23M5O35S1:S19.2E:22000:255:0;259=deu:0:0:4900:1:1007:0
    ASTRA HD+;BetaDigital:11302:hC23M5O35S1:S19.2E:22000:511:0;515=deu:0:0:4901:1:1007:0


    Jetzt sollte auch mit S2API-Treiber ein Bild unter HDTV kommen.


    ACPI-Wakeup


    Wenn eure Kiste ACPI-Wakeup unterstützt (z.B. die Activy) müßt ihr wie hier beschrieben vorgehen:


    http://www.reelbox-forum.com/showthread.php?t=13057&highlight=acpi+wakeup&page=2


    Anpassungen für Activy


    Das alcd-Plugin von hier sollte sich ganz einfach nach /home/reel/stable/src/vdr-plugins/src auspacken und übersetzen lassen (oder hab ich da noch was am Makefile editiert???).


    Zum Start des Plugins im ReelVdr erzeugt man am besten ein File /etc/reel/p.alcd.conf mit folgendem Inhalt:


    Code
    LOAD_PLUGIN=true
    PLUGIN_OPTIONS="-Palcd"


    Mit dem Package unten sollte die Activy Fernbedienung laufen und der Powerbutton funktionieren (inkl. Reel-Pseudo-Standby).
    Dazu das Tar-File nach / auspacken und


    Code
    cd /
    wget http://www.vdr-portal.de/board/attachment.php?attachmentid=22826 -O activystart.tgz
    tar xvzf activystart.tgz
    update-rc.d activy defaults


    scubidoo also found a solution for lircd Users


    Um die Tasten neu anzulernen in der \etc\vdr\remote.conf die Lirc-Befehle löschen. Aber nur das Kommando hinter LIRC...
    Die Zeile an sich muss drin bleiben.


    z.B. aus "LIRC.Up up" wird nur noch "LIRC.Up"


    Nach dem Neustart des VDR kann neu angelernt werden.


    Viel Spaß,


    Sascha

  • Danke fürs Howto werde ich gleich mal testen.


    Zitat

    Original von Galaga


    Wenn ich Zeit hab, mach ich mal nen neuen Diff dafür. Kann mir jemand nen Einzeiler sagen, wie ich aus 2 Verzeichnissen ein Diff-File baue?


    Zitat aus dem wiki:


    ..und so macht man einen Patch:


    Wir gehen ins Verzeichnis temp mit den Unterverzeichnissen D1 (alte Version) und D2 (neue Version) dann
    Code:


    diff -NaurwB D1/ D2/ > unterschied-D1-D2.patch


    -N fehlende Dateien als leer betrachten
    -a alles Text Dateien
    -u 3 Zeilen "drum herum" ausgeben
    -r Unterverzeichnisse einbeziehen
    -w Leerzeichen und Tabs ignorieren (ggf. weglassen)
    -B Leerzeilen ignorieren



    mfg Thomas

    VDR:
    Hardware: Thermaltake DH102, Zotac ION ITX-F-E, 2Gig Ram, TechnoTrend
    dual DVB-S2 6400, TechnoTrend Connect CT-3650,


    Software: EasyVDR 1.0

  • Danke, ich hab dann mal nen eigenen aktuellen diff gemacht.


    Kompiliert hab ich damit allerdings jetzt noch nicht. Deshalb wäre Rückmeldung nett.

    ... that light at the end of the tunnel is the front of an oncoming train.


    System1:
    Reelbox Avantgarde


    System2 (Backup/Spielerei)
    Software: Windows XP mit DVBViewer, Hardware: Asus Pundit, tevii s660, Nova-T USB, Tevii S660

  • using the last svn and the last patch give me this error patching



    root@ReelBox:/usr/local/src/stable/src# patch -p1 < s2api_reelvdr_svn13296-clean.diff
    patching file vdr-1.4/channels.c
    Hunk #1 succeeded at 21 (offset -1 lines).
    Hunk #2 succeeded at 137 (offset -1 lines).
    Hunk #3 succeeded at 201 (offset -1 lines).
    Hunk #4 succeeded at 314 (offset -1 lines).
    Hunk #5 succeeded at 336 (offset -1 lines).
    Hunk #6 succeeded at 359 (offset -1 lines).
    Hunk #7 succeeded at 389 (offset -1 lines).
    Hunk #8 succeeded at 484 (offset -1 lines).
    Hunk #9 succeeded at 521 (offset -1 lines).
    Hunk #10 succeeded at 619 (offset -1 lines).
    Hunk #11 succeeded at 630 (offset -1 lines).
    Hunk #12 succeeded at 640 (offset -1 lines).
    Hunk #13 succeeded at 658 (offset -1 lines).
    Hunk #14 succeeded at 687 (offset -1 lines).
    Hunk #15 succeeded at 744 (offset -1 lines).
    Hunk #16 succeeded at 808 (offset -1 lines).
    Hunk #17 succeeded at 1045 (offset -26 lines).
    patching file vdr-1.4/channels.h
    patching file vdr-1.4/ci.c
    patching file vdr-1.4/ci.h
    patching file vdr-1.4/config.c
    Hunk #2 succeeded at 327 (offset -1 lines).
    Hunk #3 succeeded at 566 (offset -1 lines).
    Hunk #4 succeeded at 691 (offset -2 lines).
    patching file vdr-1.4/config.h
    Hunk #1 succeeded at 311 (offset -4 lines).
    Hunk #2 succeeded at 333 (offset -5 lines).
    patching file vdr-1.4/device.c
    Hunk #1 succeeded at 511 (offset -5 lines).
    Hunk #2 succeeded at 923 (offset -5 lines).
    Hunk #3 succeeded at 943 (offset -5 lines).
    Hunk #4 succeeded at 1807 (offset -5 lines).
    Hunk #5 succeeded at 1842 (offset -5 lines).
    patching file vdr-1.4/dvbdevice.c
    Hunk #4 succeeded at 102 with fuzz 1 (offset -4 lines).
    Hunk #5 succeeded at 115 (offset -4 lines).
    Hunk #6 succeeded at 133 (offset -4 lines).
    Hunk #7 succeeded at 186 (offset -4 lines).
    Hunk #8 succeeded at 224 (offset -4 lines).
    Hunk #9 succeeded at 386 (offset -4 lines).
    Hunk #10 succeeded at 591 (offset -60 lines).
    Hunk #11 succeeded at 671 with fuzz 1 (offset -60 lines).
    Hunk #12 succeeded at 714 (offset -60 lines).
    Hunk #13 succeeded at 873 (offset -65 lines).
    Hunk #14 succeeded at 1126 (offset -65 lines).
    Hunk #15 succeeded at 1160 (offset -65 lines).
    Hunk #16 succeeded at 1187 (offset -65 lines).
    Hunk #17 succeeded at 1226 (offset -65 lines).
    Hunk #18 succeeded at 1639 (offset -65 lines).
    patching file vdr-1.4/dvbdevice.h
    Hunk #3 succeeded at 65 (offset -1 lines).
    Hunk #4 succeeded at 132 (offset -7 lines).
    patching file vdr-1.4/eit.c
    Hunk #1 succeeded at 25 (offset -2 lines).
    Hunk #2 succeeded at 68 (offset -2 lines).
    patching file vdr-1.4/Makefile
    Hunk #2 succeeded at 28 with fuzz 2.
    Hunk #3 FAILED at 37.
    1 out of 3 hunks FAILED -- saving rejects to file vdr-1.4/Makefile.rej
    patching file vdr-1.4/menu.c
    Hunk #1 succeeded at 366 (offset -11 lines).
    Hunk #2 succeeded at 416 (offset -11 lines).
    Hunk #3 succeeded at 428 (offset -11 lines).
    Hunk #4 succeeded at 436 (offset -11 lines).
    Hunk #5 FAILED at 558.
    Hunk #6 succeeded at 3850 (offset -94 lines).
    Hunk #7 succeeded at 4484 (offset -94 lines).
    Hunk #8 succeeded at 4575 (offset -94 lines).
    Hunk #9 succeeded at 4594 (offset -94 lines).
    Hunk #10 succeeded at 4609 (offset -94 lines).
    Hunk #11 succeeded at 6467 (offset -109 lines).
    Hunk #12 succeeded at 6636 (offset -138 lines).
    1 out of 12 hunks FAILED -- saving rejects to file vdr-1.4/menu.c.rej
    patching file vdr-1.4/menuitems.h
    patching file vdr-1.4/nit.c
    patching file vdr-1.4/pat.c
    patching file vdr-1.4/vdr.c
    Hunk #1 succeeded at 724 (offset -10 lines).
    Hunk #2 FAILED at 1275.
    1 out of 2 hunks FAILED -- saving rejects to file vdr-1.4/vdr.c.rej



    any ideia???

  • ok i try this patch from here and whit this one patch fine but give me this error on compile



    make vdr
    make -C vdr-1.4 vdr
    make[1]: Betrete Verzeichnis '/usr/local/src/stable/src/vdr-1.4'
    Creating dependencies
    make[1]: Verlasse Verzeichnis '/usr/local/src/stable/src/vdr-1.4'
    make[1]: Betrete Verzeichnis '/usr/local/src/stable/src/vdr-1.4'
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include audio.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include channels.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include ci.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include config.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include cutter.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include device.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include diseqc.c
    ccache g++ -g -O2 -funroll-loops -fomit-frame-pointer -m32 -march=pentium3 -mmmx -msse -mfpmath=sse -Wall -Woverloaded-virtual -c -DREMOTE_KBD -DREMOTE_LIRC -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -DMAXOSDMEMORY="1000000" -D_GNU_SOURCE -DVIDEODIR=\"/media/hd/recordings\" -DPLUGINDIR=\"/usr/lib/vdr\" -DDELAYED_TRICKMODE -DLOCDIR=\"./locale\" -DUSE_H264_PARSER -I/usr/include/freetype2 -I/usr/local/src/s2-liplianin/linux/include dvbdevice.c
    In Datei, eingefügt von /usr/local/src/s2-liplianin/linux/include/linux/videodev.h:16,
    von dvbdevice.c:13:
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:64:28: Fehler: linux/compiler.h: No such file or directory
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:560: Fehler: Feld »__user« hat unvollständigen Typen
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:560: Fehler: expected »;« before »*« token
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:567: Fehler: expected »;« before »*« token
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:569: Fehler: Variable oder Feld »__user« als »void« deklariert
    /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:569: Fehler: expected »;« before »*« token
    /usr/local/src/s2-liplianin/linux/include/linux/videodev.h:148: Fehler: expected »;« before »*« token
    /usr/local/src/s2-liplianin/linux/include/linux/dvb/video.h:162: Fehler: expected »;« before »*« token
    /usr/local/src/s2-liplianin/linux/include/linux/dvb/video.h:195: Fehler: expected »;« before »*« token
    dvbdevice.c: In member function »virtual void cDvbDevice::StillPicture(const uchar*, int)«:
    dvbdevice.c:1583: Fehler: zu viele Initialisierer für »video_still_picture«
    dvbdevice.c:1583: Fehler: ungültige Umwandlung von »char*« in »int32_t«
    dvbdevice.c:1589: Fehler: zu viele Initialisierer für »video_still_picture«
    dvbdevice.c:1589: Fehler: ungültige Umwandlung von »char*« in »int32_t«
    dvbdevice.c: At global scope:
    dvbdevice.c:218: Warnung: »unsigned int FrequencyToHz(unsigned int)« definiert, aber nicht verwendet
    make[1]: *** [dvbdevice.o] Fehler 1
    make[1]: Verlasse Verzeichnis '/usr/local/src/stable/src/vdr-1.4'
    make: *** [vdr-1.4/vdr] Fehler 2



    i use a old s2api driver for a skystarhd2


    mut you the new ones????

    yavdr 0,4 amd sempron 145 nvidia gt520 cablestar

    Einmal editiert, zuletzt von scubidoo ()

  • Zitat

    Original von Yuri666
    It is necessary to copy compiler.h to /usr/local/src/s2-liplianin/linux/include/linux/ from linux source.
    But I meant a patch s2api_reelvdr_svn13296-clean.diff and last svn.



    strange because i have copy this file to the folder /usr/local/src/s2-liplianin/linux/include/linux


    ls /usr/local/src/s2-liplianin/linux/include/linux/
    compiler.h ivtvfb.h video_decoder.h videotext.h
    dvb/ ivtv.h videodev2.h
    i2c-id.h meye.h videodev.h


    i have download the last patch and give me the same error as above

    yavdr 0,4 amd sempron 145 nvidia gt520 cablestar

    Einmal editiert, zuletzt von scubidoo ()

  • Zitat


    strange because i have copy this file to the folder /usr/local/src/s2-liplianin/linux/include/linux


    Yes, but this is correct.


    You should use my patch for the stable branch.


    After copying the compiler.h it should work.
    Compilation did also work for the liplialin driver.
    But this driver was not working with my KNC card.


    Do you have the correct path to your driver in Make.config?

    ... that light at the end of the tunnel is the front of an oncoming train.


    System1:
    Reelbox Avantgarde


    System2 (Backup/Spielerei)
    Software: Windows XP mit DVBViewer, Hardware: Asus Pundit, tevii s660, Nova-T USB, Tevii S660

    4 Mal editiert, zuletzt von Galaga ()

  • ok


    the problem was whit the compile.h file corrupt


    remove it and copy again now it compiles



    i already have it working


    now what i see is on hd channel the imagem sometime go out and came back


    buffer problem or signal'??


    another thing is how to scan channels if i can.


    i have to take out the netceiver plugins??'


    i have to compile the plugins for the channels work??


    sorry to lots of questions

  • Zitat

    now what i see is on hd channel the imagem sometime go out and came back buffer problem or signal'??


    I had this problem very few times yesterday. But it was gone afer switching to an SD channel and back.
    It might also depend on the driver for your S2 card.


    I don't know much about the patch. Somebody found it here:
    http://www.forum.free-x.de/wbb/index.php?page=Thread&threadID=316


    We should ask the developer of the patch.


    Yuri666 might know more about it, because he had a never version of the patch. He might be the same yuri from that russian board.
    Sorry, but I don't speak any russian.


    @Yuri
    Are you the developer? Can you tell us more about it.
    Where can we find never versions?


    Zitat

    another thing is how to scan channels if i can.


    In the old patch for multiproto (here) there is also a change to the channelscan plugin.


    Maybe somebody could also convert this to S2API.
    But on my machine it wasn't working anyway.


    Zitat

    i have to take out the netceiver plugins??'


    Do you have a netceiver?
    Channel configuration in chgannels.conf for the netceiver and for S2 cards is different. So they won't work in parallel.

    ... that light at the end of the tunnel is the front of an oncoming train.


    System1:
    Reelbox Avantgarde


    System2 (Backup/Spielerei)
    Software: Windows XP mit DVBViewer, Hardware: Asus Pundit, tevii s660, Nova-T USB, Tevii S660

    4 Mal editiert, zuletzt von Galaga ()

  • Zitat

    Originally posted by Galaga


    I had this problem very few times yesterday. But it was gone afer switching to an SD channel and back.
    It might also depend on the driver for your S2 card.


    I have no such problems on hd channels. My card hvr4000.



    Zitat

    Yuri666 might know more about it, because he had a never version of the patch. He might be the same yuri from that russian board.
    Sorry, but I don't speak any russian.


    Yes, I same. But I don't speak in German and even in English too :) I can advise translate :)


    Zitat

    @Yuri
    Are you the developer? Can you tell us more about it.
    Where can we find never versions?


    I only have altered patch for multiproto and Zulu S2API patch for vdr-1.7.0. I attach last version for testing branch. For me it work fine.


    Zitat

    In the old patch for multiproto (here) there is also a change to the channelscan plugin.


    Maybe somebody could also convert this to S2API.
    But on my machine it wasn't working anyway.


    With patch for multiptoto scanning of dvb-s2 channels does not work. Therefore any convert to s2api not work too.
    I not the programmer and to update something for me there is no knowledge.

  • Great, thank you for your work.


    I hope together we can manage to keep this running for a longer period of time.


    If we get into translation problems I can contact an old friend of mine who has studied in Moscow.


    Zitat

    I have no such problems on hd channels. My card hvr4000.


    I have no real problems for a KNC S2 too.


    scubidoo
    I did not remove the netceiver plugin. I just wanted to point out that channels.conf for HD channels is different for a netceiver.


    1.7 channels.conf is also not working. But a 1.6 channels.conf should be o.k.

    ... that light at the end of the tunnel is the front of an oncoming train.


    System1:
    Reelbox Avantgarde


    System2 (Backup/Spielerei)
    Software: Windows XP mit DVBViewer, Hardware: Asus Pundit, tevii s660, Nova-T USB, Tevii S660

    Einmal editiert, zuletzt von Galaga ()

  • ok now it working fine



    i think the problem was signal and a reajust de antena and now dont see the problem on hd


    i have to tanks you for all your help and good work


    i have one more question


    i have a imonlcd


    what is the lcdproc to use because i trying to compile the imonlcd plugin or lcdproc and give me error

  • ok plugins imonlcd working whit reelvdr and my lcd running



    we have to put this lines on Makefile


    find


    -include $(VDRDIR)/Make.config


    and put this lines below


    -include Make.config
    -include $(VDRDIR)/Make.common


    go do vdr-plugins/src/ folder and mv all plugins to a folder of your choice and copy the imonlcd plugin on this folder then go to vdr-1.4 and make plugins and make install


    go to /usr/sbin


    nano reelvdrd and search the plugins and edit the file putting


    -Pimonlcd \


    and restart your reelvdr and enjoy

    yavdr 0,4 amd sempron 145 nvidia gt520 cablestar

    Einmal editiert, zuletzt von scubidoo ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!