Nach PVR einbau fährt VDR nicht hoch

M@dMo · 11. Oktober 2008

Hallo liebes Forum,
nach langer Zeit wollte ich mal meine VDr Updaten. Ich habe also zu meiner bestehenden Konfiguration aus Einer FuSie DVB-C einer Cinergy DVB-C und 2 DVB-T PCI Karten noch eine PVR 350 dazu gesteckt. Wenn ich den Rechner hochfahren will startet dieser erst garnicht. Ich kommer nicht mal ins BIOS.
Weiß jemand wodran das liegen kann?

Ohne die Karte PVR läuft alles wie gehabt. Die PVR Karte läuft aber auch in einem anderen Rechner ohne Probleme.

System sollte wie in der Signatur beschrieben sein.
MfG
Mo

mcdikki · 11. Oktober 2008

Das hört sich nach der Hardware an.

Versuche mal die PVR auf einen anderen PCI Steckplatz zu stecken.
Oder mal nur die PVR reinzumachen.

Dann können wir schmal ausschließen, dass 1. der Steckplatz oder 2. die anderen Karten sich nicht mit der PVR vertragen.

Wenn es dann immernoch nicht geht, kann es sein, dass dein Board die Karte nicht leiden kann. (Vielleicht weil der PCI BUS nicht zu 100% Konform ist o.Ä.)

lg mcdikki

M@dMo · 11. Oktober 2008

Anderen Steckplatz habe ich schon versucht. Wollte aber auch nicht.
Ich glaube ich hatte das Problem schon einmal als ich ein dirtte DVB-T Karte einbauen wollte. Wird wohl am Board liegen. Ich schmeiß einfach eine DVB-T Karte raus. Mals sehen obs dann geht. Danke schonaml

Dr. Seltsam · 11. Oktober 2008

Ressourcenkonflikte (IRQ)?

deaktivier mal im BIOS alles, was Du nicht brauchst (Floppy-Controller, unbebötigte serielle Schnittstellen, evtl. 2. IDE-Controller, evtl. USB-Controller)

M@dMo · 11. Oktober 2008

Ok, hab alles rausgenommen und die Karten eine nach der anderen wieder eingesetzt. Jetzt startet der VDR.

ich hab jetzt aber ein neues Problem.

Wenn ich auf die AnalogenSender schalten will die w_pvrscan gefunden bleibt das bIld schwarz.Wenn ich ganz durchschalte auf die gefundenen Composite oder S-Video kommt ein roter Balken auf dem steht: Transfer-Mode kann nicht gestartet werden.Was bedeutet das?

Hab die Module

ivtv
und
ivtvfb (da ich Kernel 2.6.23.1 nutze) ind die runvdr eingetragen.

Im Setup ist pvrinput aktiviert. Hab ich was vergessen?

Dr. Seltsam · 11. Oktober 2008

welche Version des pvrinput-Plugins benutzt Du?

Kannst Du auf das letzteToxic-Tonic-Paket 1.4.7-ext40 updaten? Da ist auch noch eine ältere pvrinput-Version drin, aber ich kann ein update bereitstellen.

Und ein update auf meinen Kernel 2.6.23.9 wäre auch zu empfehlen.

M@dMo · 11. Oktober 2008

Zitat

Original von Dr. Seltsam
welche Version des pvrinput-Plugins benutzt Du?

Äh wie finde ich das raus? Habs einfach übers Setup ausgewählt

Updaten sollte gehn. Würds aber im moment gern vermeiden, weil ich von verschwundenen Menues gelesen hab, und mich nicht so auskenn. Müste doch auch mit 1.4.7ext34 gehen oder?

Dr. Seltsam · 12. Oktober 2008

schau einfach in Einstellungen -Plugins, da steht zu jedem Plugin auch die Version.

Die verschwundenen Menüs sollten beim update von ext34 auf ext40 nicht auftreten.

Das problem ist, dass ich in meiner Entwicklungsumgebung nur die Sourcen für die ext40 habe, also kann ich auch nur neue Plugin-Versionen für die ext40 kompilieren. Und es hat sich bei pvrinput und auch beim ivtv-Treiber soviel getan, dass ein update wirklich sinn macht. Ich möchte auch keine Fehlersuche mit historischen Versionen betreiben.

M@dMo · 12. Oktober 2008

Ok dann wird geupdated.

M@dMo · 12. Oktober 2008

So hab geupdated, aber Bild bleibt schwarz. hab auch nochmal mit pvrscan nach den Sendern gesucht. Es wurden auch viele Sender gefunden. Wen ich die Sender in die channels.conf schmeiße und und unter Kanäle editieren will stehen dann aber immer auf verschlüsselt. Und bei Quelle steht C - Cable.
Da scheint doch noch irgendwas falsch zu sein oder??

Pvrinput soll jetzt Version 1.0.0_20070523 sein
Kernen ist 2.6.23.9

Dr. Seltsam · 12. Oktober 2008

o.k. jetzt lädst Du bitte als nächstes
http://drseltsam.device.name/v…tt-pvr-plugins-041008.tgz
herunter und entpackst es

tar vdr-1.4.7-ext40-tt-pvr-plugins-041008.tgz -C /

wenn dann nach einem Neustart die pvr-Kanäle immer noch dunkel bleiben, poste bitte mal einen channels.conf-Eintrag und den Auszug von dmesg sowie /var/log/messages (ab vdr Start)

M@dMo · 12. Oktober 2008

Ne geht immernoch nicht.

SE4;w_pvrscan:126250:C0:C:0:301:300:305:0:2020:0:0:0
SE5;w_pvrscan:133250:C0:C:0:301:300:305:0:2132:0:0:0
SE6;w_pvrscan:140250:C0:C:0:301:300:305:A1:2244:0:0:0
SE7;w_pvrscan:147250:C0:C:0:301:300:305:A1:2356:0:0:0
SE8;w_pvrscan:154250:C0:C:0:301:300:305:A1:2468:0:0:0
SE9;w_pvrscan:161250:C0:C:0:301:300:305:A1:2580:0:0:0
SE10;w_pvrscan:168250:C0:C:0:301:300:305:A1:2692:0:0:0
k05;w_pvrscan:175250:C0:C:0:301:300:305:A1:2804:0:0:0
k06;w_pvrscan:182250:C0:C:0:301:300:305:A1:2916:0:0:0
k07;w_pvrscan:189250:C0:C:0:301:300:305:A1:3028:0:0:0

so sehen die channels aus. bei den ersten 2 hab ich die verschlüsselung auf frei empfangbar gesetzt

linvdr:~# dmesg
[ 33.277843] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
[ 33.277988] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 33.278039] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 33.369314] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
[ 33.369447] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
[ 33.369490] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 33.369525] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
[ 33.369558] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
[ 33.369590] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[ 33.369625] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 33.644126] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 33.845661] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
[ 33.864736] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
[ 33.864867] msp3400 0-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect
[ 33.886431] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 33.886587] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 33.911642] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 33.914735] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 33.917908] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 33.920992] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 33.924109] ivtv0: Registered device radio0 for encoder radio
[ 33.927233] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[ 33.930389] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[ 33.933503] ivtv0: Registered device vbi16 for decoder VOUT
[ 33.936346] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[ 33.936482] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
[ 33.936565] ivtv: End initialization
[ 34.665456] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 34.703226] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 34.903195] ivtv0: Encoder revision: 0x02060039
[ 34.903441] ivtv0: Decoder revision: 0x02020023
[ 35.002792] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[ 35.204932] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
[ 35.313830] ivtvfb0: Framebuffer registered on ivtv card id 0
[ 35.577777] saa7146: register extension 'dvb'.
[ 35.580876] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
[ 35.581034] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 35.581133] saa7146: found saa7146 @ mem f9032000 (revision 1, irq 21) (0x110a,0x0000).
[ 35.624902] DVB: registering new adapter (Fujitsu Siemens DVB-C)
[ 35.763445] adapter has MAC addr = 00:d0:5c:02:04:63
[ 36.099540] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
[ 36.099662] dvb-ttpci: firmware @ card 0 supports CI link layer interface
[ 36.193485] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
[ 36.198390] saa7146_vv: saa7146 (0): registered device video1 [v4l2]
[ 36.201456] saa7146_vv: saa7146 (0): registered device vbi1 [v4l2]
[ 36.231816] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
[ 36.237478] input: DVB on-card IR receiver as /class/input/input2
[ 36.240487] dvb-ttpci: found av7110-0.
[ 36.275862] saa7146: register extension 'budget dvb'.
[ 36.312776] saa7146: register extension 'budget_ci dvb'.
[ 36.334526] saa7146: register extension 'budget_av'.
[ 36.337617] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
[ 36.337768] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 36.337874] saa7146: found saa7146 @ mem f992a000 (revision 1, irq 22) (0x153b,0x1176).
[ 36.337923] saa7146 (1): dma buffer size 192512
[ 36.337956] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
[ 36.479176] adapter failed MAC signature check
[ 36.479304] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 36.719590] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
[ 36.876051] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
[ 36.882064] budget-av: ci interface initialised.
[ 36.935032] bttv: driver version 0.9.17 loaded
[ 36.935179] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 36.941036] bttv: Bt8xx card found (0).
[ 36.941207] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
[ 36.941249] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 36.941321] bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 22, latency: 32, mmio: 0xe7800000
[ 36.941386] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
[ 36.941423] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
[ 36.941490] bttv0: gpio: en=00000000, out=00000000 in=0090000f [init]
[ 36.944460] bttv0: tuner absent
[ 36.947565] bttv0: registered device video2
[ 36.950680] bttv0: registered device vbi2
[ 36.950838] bttv0: PLL: 28636363 => 35468950 .. ok
[ 36.975081] bttv0: add subdevice "dvb0"
[ 36.988249] input: bttv IR (card=123) as /class/input/input3
[ 37.003236] bt878: AUDIO driver version 0.0.0 loaded
[ 37.006211] bt878: Bt878 AUDIO function found (0).
[ 37.006367] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
[ 37.006409] ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 16 (level, low) -> IRQ 22
[ 37.006450] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
[ 37.006492] bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 22, latency: 32, memory: 0xe7000000
[ 37.015719] DVB: registering new adapter (bttv0)
[ 37.115638] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
[ 37.185805] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 37.193985] flexcop-pci: will use the HW PID filter.
[ 37.194137] flexcop-pci: card revision 2
[ 37.194178] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
[ 37.194220] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 37.198196] DVB: registering new adapter (FlexCop Digital TV device)
[ 37.208655] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
[ 37.211735] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
[ 37.212176] b2c2-flexcop: i2c master_xfer failed
[ 37.413258] b2c2-flexcop: i2c master_xfer failed
[ 37.413508] b2c2-flexcop: found the mt352 at i2c address: 0x0f
[ 37.413549] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
[ 37.416690] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 37.458373] i2c /dev entries driver
[ 37.500999] lirc_dev: IR Remote Control driver registered, major 61
[ 37.510156] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
[ 37.513131]
[ 37.513135] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
[ 37.513289] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[ 37.517063] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 37.538915] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
[ 37.552944] usbcore: registered new interface driver lirc_atiusb
[ 58.875257] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
[ 60.509657] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
[ 66.770329] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
[ 87.793549] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
[ 90.691478] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
[ 205.440045] DVB: frontend 1 symbol rate 0 out of range (451875..7230000)
[ 226.435270] DVB: frontend 1 symbol rate 0 out of range (451875..7230000)

logread:

Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.info kernel: [ 31.954436] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:24:57 linvdr user.info kernel: [ 31.954456] ata2: soft resetting port
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.info kernel: [ 32.115369] ata2: EH complete
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:24:57 linvdr user.info kernel: [ 32.137687] ata2: soft resetting port
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:24:57 linvdr user.info kernel: [ 32.298522] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:24:57 linvdr user.info kernel: [ 32.298545] ata2: soft resetting port
Oct 12 13:24:57 linvdr user.info kernel: [ 32.459244] ata2: EH complete
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:24:57 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:24:57 linvdr user.info kernel: [ 32.643222] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 13:24:57 linvdr user.info kernel: GSI 23 (level, low) -> IRQ 19
Oct 12 13:24:57 linvdr user.info kernel: f9, IRQ 19.
Oct 12 13:24:57 linvdr user.info kernel: [ 32.650401] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 12 13:24:57 linvdr user.info kernel: [ 32.652038] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 13:24:58 linvdr user.info kernel: [ 33.030535] Linux video capture interface: v2.00
Oct 12 13:24:58 linvdr auth.info sshd[2769]: Server listening on 0.0.0.0 port 22.
Oct 12 13:24:58 linvdr daemon.info init: ^MStarting pid 2784, console /dev/tty1: '/sbin/getty'
Oct 12 13:24:58 linvdr daemon.info init: ^MStarting pid 2785, console /dev/tty2: '/sbin/getty'
Oct 12 13:24:58 linvdr daemon.info init: ^MStarting pid 2791, console /dev/tty3: '/sbin/getty'
Oct 12 13:24:58 linvdr daemon.info init: ^MStarting pid 2794, console /dev/tty4: '/sbin/getty'
Oct 12 13:24:58 linvdr user.info kernel: [ 33.561112] ivtv: Start initialization, version 1.2.0
Oct 12 13:24:58 linvdr user.info kernel: [ 33.561615] ivtv0: Initializing card #0
Oct 12 13:24:58 linvdr user.info kernel: [ 33.561701] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:24:58 linvdr user.warn kernel: [ 33.579083] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
Oct 12 13:24:58 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:24:58 linvdr user.info kernel: [ 33.579276] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 12 13:24:58 linvdr user.info kernel: [ 33.664344] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668225] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668263] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668297] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668330] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668362] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:24:58 linvdr user.info kernel: [ 33.668395] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:24:59 linvdr user.info kernel: [ 33.899437] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.054202] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.065250] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:24:59 linvdr user.info kernel:
Oct 12 13:24:59 linvdr user.info kernel: [ 34.086982] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.087156] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:24:59 linvdr user.info kernel: [ 34.101191] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.104237] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.107323] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.110408] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.113495] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:24:59 linvdr user.info kernel: [ 34.116634] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.119761] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.122833] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:24:59 linvdr user.info kernel: [ 34.125904] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:24:59 linvdr user.info kernel: [ 34.126045] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:24:59 linvdr user.info kernel: [ 34.126149] ivtv: End initialization
Oct 12 13:25:00 linvdr user.info kernel: [ 34.873413] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:25:00 linvdr user.info kernel: [ 34.915613] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:25:00 linvdr user.info kernel: [ 35.115947] ivtv0: Encoder revision: 0x02060039
Oct 12 13:25:00 linvdr user.info kernel: [ 35.116117] ivtv0: Decoder revision: 0x02020023
Oct 12 13:25:00 linvdr user.info kernel: [ 35.211620] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:25:00 linvdr user.info kernel: [ 35.412688] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:25:00 linvdr user.info kernel: [ 35.520607] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:25:01 linvdr auth.info sshd[2781]: Could not reverse map address 192.168.1.8.
Oct 12 13:25:01 linvdr user.warn kernel: [ 35.953122] saa7146: register extension 'dvb'.
Oct 12 13:25:01 linvdr user.warn kernel: [ 35.956193] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
Oct 12 13:25:01 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:25:01 linvdr user.warn kernel: found saa7146 @ mem f9032000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:25:01 linvdr user.info kernel: [ 36.000036] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.138154] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.474245] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.474352] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.566192] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:25:01 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:25:01 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.604527] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:25:01 linvdr user.info kernel: [ 36.610567] input: DVB on-card IR receiver as /class/input/input2
Oct 12 13:25:01 linvdr user.info kernel: [ 36.613645] dvb-ttpci: found av7110-0.
Oct 12 13:25:01 linvdr user.warn kernel: [ 36.648178] saa7146: register extension 'budget dvb'.
Oct 12 13:25:02 linvdr user.warn kernel: [ 36.688311] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:25:02 linvdr user.warn kernel: [ 36.710208] saa7146: register extension 'budget_av'.
Oct 12 13:25:02 linvdr user.warn kernel: [ 36.713261] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
Oct 12 13:25:02 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:25:02 linvdr user.warn kernel: found saa7146 @ mem f992a000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:25:02 linvdr user.warn kernel: [ 36.713571] saa7146 (1): dma buffer size 192512
Oct 12 13:25:02 linvdr user.info kernel: [ 36.713604] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:25:02 linvdr user.warn kernel: [ 36.853879] adapter failed MAC signature check
Oct 12 13:25:02 linvdr user.warn kernel: ff
Oct 12 13:25:02 linvdr user.info kernel: [ 37.094295] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.251757] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:25:02 linvdr user.info kernel: [ 37.256959] budget-av: ci interface initialised.
Oct 12 13:25:02 linvdr user.info kernel: [ 37.310366] bttv: driver version 0.9.17 loaded
Oct 12 13:25:02 linvdr user.info kernel: [ 37.310502] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:25:02 linvdr user.info kernel: [ 37.316357] bttv: Bt8xx card found (0).
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.316520] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
Oct 12 13:25:02 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:25:02 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:25:02 linvdr user.info kernel: [ 37.316674] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:25:02 linvdr user.info kernel: [ 37.316710] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:25:02 linvdr user.debug kernel: [ 37.316777] bttv0: gpio: en=00000000, out=00000000 in=00d0fe0f [init]
Oct 12 13:25:02 linvdr user.info kernel: [ 37.319812] bttv0: tuner absent
Oct 12 13:25:02 linvdr user.info kernel: [ 37.323386] bttv0: registered device video2
Oct 12 13:25:02 linvdr user.info kernel: [ 37.326502] bttv0: registered device vbi2
Oct 12 13:25:02 linvdr user.info kernel: ok
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.350785] bttv0: add subdevice "dvb0"
Oct 12 13:25:02 linvdr user.info kernel: [ 37.362928] input: bttv IR (card=123) as /class/input/input3
Oct 12 13:25:02 linvdr user.info kernel: [ 37.385927] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:25:02 linvdr user.info kernel: [ 37.386246] bt878: Bt878 AUDIO function found (0).
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.386302] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
Oct 12 13:25:02 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:25:02 linvdr user.info kernel: [ 37.386383] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:25:02 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:25:02 linvdr user.info kernel: [ 37.394104] DVB: registering new adapter (bttv0)
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.455083] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:25:02 linvdr user.info kernel: [ 37.494641] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:25:02 linvdr user.info kernel: [ 37.502854] flexcop-pci: will use the HW PID filter.
Oct 12 13:25:02 linvdr user.info kernel: [ 37.502996] flexcop-pci: card revision 2
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.503036] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
Oct 12 13:25:02 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:25:02 linvdr user.info kernel: [ 37.506926] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:25:02 linvdr user.info kernel: [ 37.517429] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:25:02 linvdr user.warn kernel: [ 37.520516] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:25:02 linvdr user.err kernel: [ 37.520974] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:25:03 linvdr user.err kernel: [ 37.721994] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:25:03 linvdr user.info kernel: [ 37.722431] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:25:03 linvdr user.warn kernel: [ 37.722477] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:25:03 linvdr user.info kernel: [ 37.725758] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:25:03 linvdr auth.info sshd[2781]: Accepted password for root from 192.168.1.8 port 2437 ssh2
Oct 12 13:25:03 linvdr auth.info sshd[2781]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Oct 12 13:25:03 linvdr auth.info PAM_unix[2781]: (ssh) session opened for user root by (uid=0)
Oct 12 13:25:03 linvdr auth.err PAM-env[2781]: Unable to open config file: No such file or directory
Oct 12 13:25:03 linvdr user.info kernel: [ 37.817236] i2c /dev entries driver
Oct 12 13:25:03 linvdr auth.err PAM-env[3042]: Unable to open config file: No such file or directory
Oct 12 13:25:03 linvdr user.info kernel: [ 37.934691] lirc_dev: IR Remote Control driver registered, major 61
Oct 12 13:25:03 linvdr user.warn kernel: [ 37.936875] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Oct 12 13:25:03 linvdr user.info kernel: [ 37.940506]
Oct 12 13:25:03 linvdr user.warn kernel: [ 37.940510] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:25:03 linvdr user.warn kernel: [ 37.940681] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:25:03 linvdr user.info kernel: [ 37.944722] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:25:03 linvdr user.warn kernel: [ 37.966615] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:25:03 linvdr user.info kernel: [ 37.983668] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:25:03 linvdr user.info vdr: [3078] VDR version 1.4.7-tt-ext40 started
Oct 12 13:25:03 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:25:03 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:25:03 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:25:03 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:25:03 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/setup.conf
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: noEPG =
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:25:04 linvdr user.err vdr: [3078] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/sources.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/diseqc.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/channels.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/timers.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/commands.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/reccmds.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/svdrphosts.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/remote.conf
Oct 12 13:25:04 linvdr user.info vdr: [3078] loading /etc/vdr/keymacros.conf
Oct 12 13:25:04 linvdr user.debug vdr: [3084] video directory scanner thread started (pid=3084, tid=3084)
Oct 12 13:25:04 linvdr user.debug vdr: [3085] video directory scanner thread started (pid=3085, tid=3085)
Oct 12 13:25:04 linvdr user.debug vdr: [3078] reading EPG data from /ramdisk/epg.data
Oct 12 13:25:04 linvdr user.debug vdr: [3078] probing /dev/dvb/adapter0/frontend0
Oct 12 13:25:05 linvdr user.debug vdr: [3085] video directory scanner thread ended (pid=3085, tid=3085)
Oct 12 13:25:05 linvdr user.debug vdr: [3084] video directory scanner thread ended (pid=3084, tid=3084)
Oct 12 13:25:06 linvdr user.debug vdr: [3087] tuner on device 1 thread started (pid=3087, tid=3087)
Oct 12 13:25:06 linvdr user.debug vdr: [3088] section handler thread started (pid=3088, tid=3088)
Oct 12 13:25:06 linvdr user.debug vdr: [3078] probing /dev/dvb/adapter1/frontend0

Dr. Seltsam · 12. Oktober 2008

dass als Quelle C und "verschlüsselt" abgezeigt wird, ist normal und die Voraussetzung dafür, dass vdr mit den analogen kanälen umgehen kann.

Die ersten beiden Einträge können also gar nicht funktionieren. Das kannst Du per oSD auch nicht korrigieren, die A1 musst Du (bei gestopptem vdr) manuell editieren.

Die anderen mit A1 sind o.k. und sollten laufen. was noch fehlt, ist das vollständige log

Nur um sicherzugehen: Du greifst das Bild am TV-Ausgang der FF ab? Du verwendest nicht die Anzeige des TV-Bildes am Monitor? Letzteres könnte Probleme bereiten, da die FF nicht mehr /dev(video ist.

DVB-Kanäle werden angezeigt?

Dr. Seltsam · 12. Oktober 2008

stell bitte im erweiterten setup von logread auf /var/log/messages um (ringbuffer syslog ausschalten)

Ich möchte /var/log/messages bis zu dem Punkt sehen, wo ein PVR-Kanal angewählt wird.

M@dMo · 12. Oktober 2008

Hallo:

Also ich lasse das Bild über die FuSie ausgeben.
DVB-T und DVB-C wird auch angezeigt

var/log/messages:

HINT: LinVDR is using the busybox syslogd.
Type "logread" or "logread -f" to see syslog messages.
Oct 12 13:50:45 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 30.946093] ata2: EH complete
Oct 12 13:50:45 linvdr user.info kernel: [ 30.999871] ata2: soft resetting port
Oct 12 13:50:45 linvdr user.info kernel: [ 31.034095] ata1: EH complete
Oct 12 13:50:45 linvdr user.info kernel: [ 31.073199] ata1: soft resetting port
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 31.161031] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:50:45 linvdr user.info kernel: [ 31.161053] ata2: soft resetting port
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:45 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:45 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:45 linvdr user.info kernel: [ 31.234008] ata1: EH complete
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:50:45 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:50:45 linvdr user.info kernel: [ 31.321978] ata2: EH pending after completion, repeating EH (cnt=3)
Oct 12 13:50:45 linvdr user.info kernel: [ 31.321999] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.482898] ata2: EH pending after completion, repeating EH (cnt=2)
Oct 12 13:50:46 linvdr user.info kernel: [ 31.482918] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.info kernel: [ 31.643851] ata2: EH complete
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.733132] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.894859] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:50:46 linvdr user.info kernel: [ 31.895084] ata2: soft resetting port
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 31.935765] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 13:50:46 linvdr user.info kernel: GSI 23 (level, low) -> IRQ 19
Oct 12 13:50:46 linvdr user.info kernel: f9, IRQ 19.
Oct 12 13:50:46 linvdr user.info kernel: [ 31.940202] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.info kernel: [ 32.023752] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 13:50:46 linvdr user.info kernel: [ 32.056738] ata2: EH complete
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:46 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:46 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:47 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:47 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:50:47 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:50:47 linvdr user.info kernel: [ 32.461124] Linux video capture interface: v2.00
Oct 12 13:50:47 linvdr auth.info sshd[2753]: Server listening on 0.0.0.0 port 22.
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2774, console /dev/tty1: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2775, console /dev/tty2: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2778, console /dev/tty3: '/sbin/getty'
Oct 12 13:50:47 linvdr daemon.info init: ^MStarting pid 2781, console /dev/tty4: '/sbin/getty'
Oct 12 13:50:47 linvdr user.info kernel: [ 32.852673] ivtv: Start initialization, version 1.2.0
Oct 12 13:50:47 linvdr user.info kernel: [ 32.855969] ivtv0: Initializing card #0
Oct 12 13:50:47 linvdr user.info kernel: [ 32.856233] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:50:47 linvdr user.warn kernel: [ 32.856369] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
Oct 12 13:50:47 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:50:47 linvdr user.info kernel: [ 32.856525] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908694] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908907] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.908975] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909038] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909099] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909159] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:50:47 linvdr user.info kernel: [ 32.909221] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:50:47 linvdr user.info kernel: [ 33.116095] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.269984] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.281098] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel:
Oct 12 13:50:47 linvdr user.info kernel: [ 33.302830] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.303067] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:50:47 linvdr user.info kernel: [ 33.317224] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.320426] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.323598] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:50:47 linvdr user.info kernel: [ 33.326811] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.330013] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:50:48 linvdr user.info kernel: [ 33.333287] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.335723] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.338875] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340055] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340215] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:50:48 linvdr user.info kernel: [ 33.340320] ivtv: End initialization
Oct 12 13:50:48 linvdr user.info kernel: [ 34.074498] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:50:48 linvdr user.info kernel: [ 34.110878] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:50:48 linvdr user.info kernel: [ 34.313558] ivtv0: Encoder revision: 0x02060039
Oct 12 13:50:48 linvdr user.info kernel: [ 34.313908] ivtv0: Decoder revision: 0x02020023
Oct 12 13:50:49 linvdr user.info kernel: [ 34.411373] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:50:49 linvdr user.info kernel: [ 34.613293] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:50:49 linvdr user.info kernel: [ 34.721210] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:50:49 linvdr user.warn kernel: [ 34.986707] saa7146: register extension 'dvb'.
Oct 12 13:50:49 linvdr user.warn kernel: [ 34.989854] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
Oct 12 13:50:49 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:50:49 linvdr user.warn kernel: found saa7146 @ mem f90ec000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:50:49 linvdr user.info kernel: [ 35.034407] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:50:49 linvdr user.warn kernel: [ 35.172806] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.508905] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.509148] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.600853] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:50:50 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:50:50 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.639184] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:50:50 linvdr user.info kernel: [ 35.645217] input: DVB on-card IR receiver as /class/input/input2
Oct 12 13:50:50 linvdr user.info kernel: [ 35.648377] dvb-ttpci: found av7110-0.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.683226] saa7146: register extension 'budget dvb'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.713379] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.735102] saa7146: register extension 'budget_av'.
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.738252] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
Oct 12 13:50:50 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:50 linvdr user.warn kernel: found saa7146 @ mem f9918000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.738692] saa7146 (1): dma buffer size 192512
Oct 12 13:50:50 linvdr user.info kernel: [ 35.738768] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:50:50 linvdr user.warn kernel: [ 35.879542] adapter failed MAC signature check
Oct 12 13:50:50 linvdr user.warn kernel: ff
Oct 12 13:50:50 linvdr user.info kernel: [ 36.119958] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:50:50 linvdr user.warn kernel: [ 36.276421] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:50:50 linvdr user.info kernel: [ 36.282601] budget-av: ci interface initialised.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.335639] bttv: driver version 0.9.17 loaded
Oct 12 13:50:51 linvdr user.info kernel: [ 36.335875] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:50:51 linvdr user.info kernel: [ 36.341854] bttv: Bt8xx card found (0).
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.342086] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
Oct 12 13:50:51 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:51 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:50:51 linvdr user.info kernel: [ 36.342347] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:50:51 linvdr user.info kernel: [ 36.342413] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:50:51 linvdr user.debug kernel: [ 36.342509] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:50:51 linvdr user.info kernel: [ 36.345577] bttv0: tuner absent
Oct 12 13:50:51 linvdr user.info kernel: [ 36.348789] bttv0: registered device video2
Oct 12 13:50:51 linvdr user.info kernel: [ 36.352002] bttv0: registered device vbi2
Oct 12 13:50:51 linvdr user.info kernel: ok
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.376561] bttv0: add subdevice "dvb0"
Oct 12 13:50:51 linvdr user.info kernel: [ 36.388612] input: bttv IR (card=123) as /class/input/input3
Oct 12 13:50:51 linvdr user.info kernel: [ 36.409561] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:50:51 linvdr user.info kernel: [ 36.409909] bt878: Bt878 AUDIO function found (0).
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.410011] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
Oct 12 13:50:51 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:50:51 linvdr user.info kernel: [ 36.410150] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:50:51 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:50:51 linvdr user.info kernel: [ 36.419771] DVB: registering new adapter (bttv0)
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.476824] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:50:51 linvdr user.info kernel: [ 36.519928] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:50:51 linvdr user.info kernel: [ 36.528314] flexcop-pci: will use the HW PID filter.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.528539] flexcop-pci: card revision 2
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.528611] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
Oct 12 13:50:51 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:50:51 linvdr user.info kernel: [ 36.532576] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:50:51 linvdr user.info kernel: [ 36.543252] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.546522] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:50:51 linvdr user.err kernel: [ 36.547037] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:50:51 linvdr user.err kernel: [ 36.747652] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:50:51 linvdr user.info kernel: [ 36.747959] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.748037] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:50:51 linvdr user.info kernel: [ 36.751168] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:50:51 linvdr user.info kernel: [ 36.784180] i2c /dev entries driver
Oct 12 13:50:51 linvdr user.info kernel: [ 36.827408] lirc_dev: IR Remote Control driver registered, major 61
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.835891] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Oct 12 13:50:51 linvdr user.info kernel: [ 36.839513]
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.839517] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.839771] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:50:51 linvdr user.info kernel: [ 36.841717] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:50:51 linvdr user.warn kernel: [ 36.862586] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:50:51 linvdr user.info kernel: [ 36.878605] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:50:51 linvdr user.info vdr: [3077] VDR version 1.4.7-tt-ext40 started
Oct 12 13:50:51 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/setup.conf
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: noEPG =
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/sources.conf
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/diseqc.conf
Oct 12 13:50:52 linvdr user.info vdr: [3077] loading /etc/vdr/channels.conf
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: unknown parameter key 'P'
Oct 12 13:50:52 linvdr user.err vdr: [3077] ERROR: error in /etc/vdr/channels.conf, line 16
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: tvonscreen
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: skinelchi
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: pvrinput
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: mplayer
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: femon
Oct 12 13:50:52 linvdr user.info vdr: [3077] deleting plugin: dvd
Oct 12 13:50:52 linvdr user.debug vdr: [3077] max. latency time 0 seconds
Oct 12 13:50:52 linvdr user.info vdr: [3077] exiting
Oct 12 13:51:09 linvdr auth.info sshd[3093]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:11 linvdr auth.info sshd[3093]: Accepted password for root from 192.168.1.8 port 2976 ssh2
Oct 12 13:51:11 linvdr auth.info sshd[3093]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Oct 12 13:51:11 linvdr auth.info PAM_unix[3093]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:11 linvdr auth.err PAM-env[3093]: Unable to open config file: No such file or directory
Oct 12 13:51:11 linvdr auth.err PAM-env[3094]: Unable to open config file: No such file or directory
Oct 12 13:51:17 linvdr cron.notice crond[3109]: crond 2.3.2 dillon, started, log level 8
Oct 12 13:51:22 linvdr auth.info sshd[3110]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:22 linvdr auth.info sshd[3110]: Accepted password for root from 192.168.1.8 port 2977 ssh2
Oct 12 13:51:22 linvdr auth.info PAM_unix[3110]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:22 linvdr auth.err PAM-env[3110]: Unable to open config file: No such file or directory
Oct 12 13:51:22 linvdr auth.err PAM-env[3111]: Unable to open config file: No such file or directory
Oct 12 13:51:51 linvdr auth.info sshd[3127]: Could not reverse map address 192.168.1.8.
Oct 12 13:51:51 linvdr auth.info sshd[3127]: Accepted password for root from 192.168.1.8 port 2978 ssh2
Oct 12 13:51:51 linvdr auth.info PAM_unix[3127]: (ssh) session opened for user root by (uid=0)
Oct 12 13:51:51 linvdr auth.err PAM-env[3127]: Unable to open config file: No such file or directory
Oct 12 13:51:51 linvdr auth.err PAM-env[3128]: Unable to open config file: No such file or directory
Oct 12 13:51:54 linvdr user.info kernel: [ 100.256432] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:51:54 linvdr user.info kernel: [ 100.262931] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:51:55 linvdr user.info kernel: [ 100.314556] bt878(0): unloading
Oct 12 13:51:55 linvdr user.debug kernel: [ 100.314778] bt878_mem: 0xf9044000.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.314896] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.321214] bttv0: unloading
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.390970] saa7146: unregister extension 'budget_av'.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.408951] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.429270] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.451545] saa7146: unregister extension 'budget dvb'.
Oct 12 13:51:55 linvdr user.warn kernel: [ 100.475824] saa7146: unregister extension 'dvb'.
Oct 12 13:51:55 linvdr user.info kernel: [ 100.511524] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:51:55 linvdr user.info kernel: [ 100.671786] ivtvfb: Unloading framebuffer module
Oct 12 13:51:56 linvdr user.info kernel: [ 101.344707] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:51:56 linvdr user.info kernel: [ 101.344938] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:51:56 linvdr user.info kernel: [ 101.488801] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:51:56 linvdr user.warn kernel: [ 101.491956] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:52:01 linvdr user.info kernel: [ 106.704322] ivtv: Start initialization, version 1.2.0
Oct 12 13:52:01 linvdr user.info kernel: [ 106.707669] ivtv0: Initializing card #0
Oct 12 13:52:01 linvdr user.info kernel: [ 106.707921] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:52:01 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760167] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760379] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760455] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760519] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760583] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760644] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:52:01 linvdr user.info kernel: [ 106.760706] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:52:01 linvdr user.info kernel: [ 106.834397] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 106.996407] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.007957] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel:
Oct 12 13:52:01 linvdr user.info kernel: [ 107.029984] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.030221] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:52:01 linvdr user.info kernel: [ 107.045054] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.048275] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.051493] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.054757] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.057956] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:52:01 linvdr user.info kernel: [ 107.061190] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.064458] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.067644] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068024] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068108] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:52:01 linvdr user.info kernel: [ 107.068211] ivtv: End initialization
Oct 12 13:52:02 linvdr user.info kernel: [ 107.760068] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 107.791777] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 107.992242] ivtv0: Encoder revision: 0x02060039
Oct 12 13:52:02 linvdr user.info kernel: [ 107.992461] ivtv0: Decoder revision: 0x02020023
Oct 12 13:52:02 linvdr user.info kernel: [ 108.076221] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:52:02 linvdr user.info kernel: [ 108.280986] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:52:03 linvdr user.info kernel: [ 108.388901] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:52:03 linvdr user.warn kernel: [ 108.567411] saa7146: register extension 'dvb'.
Oct 12 13:52:03 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:52:03 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:52:03 linvdr user.info kernel: [ 108.595090] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:52:03 linvdr user.warn kernel: [ 108.718546] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.057645] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.057862] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.150590] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:52:03 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:52:03 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.188919] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:52:03 linvdr user.info kernel: [ 109.195276] input: DVB on-card IR receiver as /class/input/input4
Oct 12 13:52:03 linvdr user.info kernel: [ 109.195683] dvb-ttpci: found av7110-0.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.233039] saa7146: register extension 'budget dvb'.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.260633] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.282456] saa7146: register extension 'budget_av'.
Oct 12 13:52:03 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:52:03 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:52:03 linvdr user.warn kernel: [ 109.286075] saa7146 (1): dma buffer size 192512
Oct 12 13:52:03 linvdr user.info kernel: [ 109.286140] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.427281] adapter failed MAC signature check
Oct 12 13:52:04 linvdr user.warn kernel: ff
Oct 12 13:52:04 linvdr user.info kernel: [ 109.667699] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.787170] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:52:04 linvdr user.info kernel: [ 109.791361] budget-av: ci interface initialised.
Oct 12 13:52:04 linvdr user.info kernel: [ 109.827400] bttv: driver version 0.9.17 loaded
Oct 12 13:52:04 linvdr user.info kernel: [ 109.827620] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:52:04 linvdr user.info kernel: [ 109.833786] bttv: Bt8xx card found (0).
Oct 12 13:52:04 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:52:04 linvdr user.info kernel: [ 109.834131] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:52:04 linvdr user.info kernel: [ 109.834199] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:52:04 linvdr user.debug kernel: [ 109.834309] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:52:04 linvdr user.info kernel: [ 109.837399] bttv0: tuner absent
Oct 12 13:52:04 linvdr user.info kernel: [ 109.840687] bttv0: registered device video2
Oct 12 13:52:04 linvdr user.info kernel: [ 109.842347] bttv0: registered device vbi2
Oct 12 13:52:04 linvdr user.info kernel: ok
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.853640] bttv0: add subdevice "dvb0"
Oct 12 13:52:04 linvdr user.info kernel: [ 109.856880] input: bttv IR (card=123) as /class/input/input5
Oct 12 13:52:04 linvdr user.info kernel: [ 109.887521] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:52:04 linvdr user.info kernel: [ 109.890737] bt878: Bt878 AUDIO function found (0).
Oct 12 13:52:04 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:52:04 linvdr user.info kernel: [ 109.891048] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:52:04 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:52:04 linvdr user.info kernel: [ 109.900334] DVB: registering new adapter (bttv0)
Oct 12 13:52:04 linvdr user.warn kernel: [ 109.960261] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:52:04 linvdr user.info kernel: [ 109.993168] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:52:04 linvdr user.info kernel: [ 110.001414] flexcop-pci: will use the HW PID filter.
Oct 12 13:52:04 linvdr user.info kernel: [ 110.001631] flexcop-pci: card revision 2
Oct 12 13:52:04 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:52:04 linvdr user.info kernel: [ 110.005349] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:52:04 linvdr user.info kernel: [ 110.016229] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.019523] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:52:04 linvdr user.err kernel: [ 110.020064] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:52:04 linvdr user.err kernel: [ 110.220418] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:52:04 linvdr user.info kernel: [ 110.220726] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.220803] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:52:04 linvdr user.info kernel: [ 110.223982] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:52:04 linvdr user.info kernel: [ 110.248706] i2c /dev entries driver
Oct 12 13:52:04 linvdr user.info kernel: [ 110.277296]
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.277300] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:52:04 linvdr user.warn kernel: [ 110.277557] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:52:04 linvdr user.info kernel: [ 110.280173] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:52:05 linvdr user.warn kernel: [ 110.301073] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:52:05 linvdr user.info kernel: [ 110.317092] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:52:05 linvdr user.info vdr: [3643] VDR version 1.4.7-tt-ext40 started
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/setup.conf
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: noEPG =
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/sources.conf
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/diseqc.conf
Oct 12 13:52:05 linvdr user.info vdr: [3643] loading /etc/vdr/channels.conf
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: unknown parameter key 'P'
Oct 12 13:52:05 linvdr user.err vdr: [3643] ERROR: error in /etc/vdr/channels.conf, line 16
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: tvonscreen
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: skinelchi
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: pvrinput
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: mplayer
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: femon
Oct 12 13:52:05 linvdr user.info vdr: [3643] deleting plugin: dvd
Oct 12 13:52:05 linvdr user.debug vdr: [3643] max. latency time 0 seconds
Oct 12 13:52:05 linvdr user.info vdr: [3643] exiting
Oct 12 13:53:07 linvdr user.info kernel: [ 172.769731] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:53:07 linvdr user.info kernel: [ 172.776452] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:53:07 linvdr user.info kernel: [ 172.828585] bt878(0): unloading
Oct 12 13:53:07 linvdr user.debug kernel: [ 172.828790] bt878_mem: 0xf994a000.
Oct 12 13:53:07 linvdr user.info kernel: [ 172.828875] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:53:07 linvdr user.warn kernel: [ 172.835635] bttv0: unloading
Oct 12 13:53:07 linvdr user.warn kernel: [ 172.903155] saa7146: unregister extension 'budget_av'.
Oct 12 13:53:07 linvdr user.info kernel: [ 173.144093] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.164619] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.187249] saa7146: unregister extension 'budget dvb'.
Oct 12 13:53:07 linvdr user.warn kernel: [ 173.212044] saa7146: unregister extension 'dvb'.
Oct 12 13:53:07 linvdr user.info kernel: [ 173.247984] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:53:08 linvdr user.info kernel: [ 173.406827] ivtvfb: Unloading framebuffer module
Oct 12 13:53:08 linvdr user.info kernel: [ 174.079259] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:53:08 linvdr user.info kernel: [ 174.079521] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:53:08 linvdr user.info kernel: [ 174.188380] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:53:08 linvdr user.warn kernel: [ 174.191616] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:53:14 linvdr user.info kernel: [ 179.403319] ivtv: Start initialization, version 1.2.0
Oct 12 13:53:14 linvdr user.info kernel: [ 179.406672] ivtv0: Initializing card #0
Oct 12 13:53:14 linvdr user.info kernel: [ 179.406924] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:53:14 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462206] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462429] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462505] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462569] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462633] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462694] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:53:14 linvdr user.info kernel: [ 179.462757] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:53:14 linvdr user.info kernel: [ 179.536211] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.699610] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.710706] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel:
Oct 12 13:53:14 linvdr user.info kernel: [ 179.731824] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.732062] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:53:14 linvdr user.info kernel: [ 179.746280] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.749546] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.752776] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.756016] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.759252] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:53:14 linvdr user.info kernel: [ 179.762499] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.765707] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767435] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767824] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:53:14 linvdr user.info kernel: [ 179.767910] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:53:14 linvdr user.info kernel: [ 179.768009] ivtv: End initialization
Oct 12 13:53:15 linvdr user.info kernel: [ 180.461322] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.490198] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.693301] ivtv0: Encoder revision: 0x02060039
Oct 12 13:53:15 linvdr user.info kernel: [ 180.693665] ivtv0: Decoder revision: 0x02020023
Oct 12 13:53:15 linvdr user.info kernel: [ 180.777363] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:53:15 linvdr user.info kernel: [ 180.982061] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:53:15 linvdr user.info kernel: [ 181.089954] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:53:15 linvdr user.warn kernel: [ 181.268575] saa7146: register extension 'dvb'.
Oct 12 13:53:15 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:53:15 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:53:16 linvdr user.info kernel: [ 181.295701] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.418606] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.754699] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.754916] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.847648] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:53:16 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:53:16 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.882981] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:53:16 linvdr user.info kernel: [ 181.884728] input: DVB on-card IR receiver as /class/input/input6
Oct 12 13:53:16 linvdr user.info kernel: [ 181.887737] dvb-ttpci: found av7110-0.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.927108] saa7146: register extension 'budget dvb'.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.954500] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.976082] saa7146: register extension 'budget_av'.
Oct 12 13:53:16 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:53:16 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:53:16 linvdr user.warn kernel: [ 181.979679] saa7146 (1): dma buffer size 192512
Oct 12 13:53:16 linvdr user.info kernel: [ 181.979743] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:53:16 linvdr user.warn kernel: [ 182.120341] adapter failed MAC signature check
Oct 12 13:53:16 linvdr user.warn kernel: ff
Oct 12 13:53:17 linvdr user.info kernel: [ 182.360754] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.480231] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.484452] budget-av: ci interface initialised.
Oct 12 13:53:17 linvdr user.info kernel: [ 182.520469] bttv: driver version 0.9.17 loaded
Oct 12 13:53:17 linvdr user.info kernel: [ 182.520683] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:53:17 linvdr user.info kernel: [ 182.526706] bttv: Bt8xx card found (0).
Oct 12 13:53:17 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:53:17 linvdr user.info kernel: [ 182.527034] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:53:17 linvdr user.info kernel: [ 182.527103] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:53:17 linvdr user.debug kernel: [ 182.527200] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:53:17 linvdr user.info kernel: [ 182.530262] bttv0: tuner absent
Oct 12 13:53:17 linvdr user.info kernel: [ 182.533439] bttv0: registered device video2
Oct 12 13:53:17 linvdr user.info kernel: [ 182.536692] bttv0: registered device vbi2
Oct 12 13:53:17 linvdr user.info kernel: ok
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.547565] bttv0: add subdevice "dvb0"
Oct 12 13:53:17 linvdr user.info kernel: [ 182.550765] input: bttv IR (card=123) as /class/input/input7
Oct 12 13:53:17 linvdr user.info kernel: [ 182.580225] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:53:17 linvdr user.info kernel: [ 182.583482] bt878: Bt878 AUDIO function found (0).
Oct 12 13:53:17 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:53:17 linvdr user.info kernel: [ 182.583796] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:53:17 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:53:17 linvdr user.info kernel: [ 182.591392] DVB: registering new adapter (bttv0)
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.650725] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.685681] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:53:17 linvdr user.info kernel: [ 182.693832] flexcop-pci: will use the HW PID filter.
Oct 12 13:53:17 linvdr user.info kernel: [ 182.694049] flexcop-pci: card revision 2
Oct 12 13:53:17 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:53:17 linvdr user.info kernel: [ 182.697421] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:53:17 linvdr user.info kernel: [ 182.708115] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.711363] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:53:17 linvdr user.err kernel: [ 182.711885] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:53:17 linvdr user.err kernel: [ 182.912473] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:53:17 linvdr user.info kernel: [ 182.912764] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.912840] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:53:17 linvdr user.info kernel: [ 182.915919] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:53:17 linvdr user.info kernel: [ 182.940757] i2c /dev entries driver
Oct 12 13:53:17 linvdr user.info kernel: [ 182.967364]
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.967366] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.967618] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:53:17 linvdr user.info kernel: [ 182.971551] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:53:17 linvdr user.warn kernel: [ 182.993144] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:53:17 linvdr user.info kernel: [ 183.004172] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:53:17 linvdr user.info vdr: [4172] VDR version 1.4.7-tt-ext40 started
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/setup.conf
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: noEPG =
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/sources.conf
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/diseqc.conf
Oct 12 13:53:17 linvdr user.info vdr: [4172] loading /etc/vdr/channels.conf
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: unknown parameter key 'P'
Oct 12 13:53:17 linvdr user.err vdr: [4172] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: tvonscreen
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: skinelchi
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: pvrinput
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: mplayer
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: femon
Oct 12 13:53:17 linvdr user.info vdr: [4172] deleting plugin: dvd
Oct 12 13:53:17 linvdr user.debug vdr: [4172] max. latency time 0 seconds
Oct 12 13:53:17 linvdr user.info vdr: [4172] exiting
Oct 12 13:53:18 linvdr auth.info PAM_unix[3110]: (ssh) session closed for user root
Oct 12 13:53:18 linvdr auth.err sshd[3110]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:53:18 linvdr auth.err PAM-env[3110]: Unable to open config file: No such file or directory
Oct 12 13:53:18 linvdr auth.info PAM_unix[3127]: (ssh) session closed for user root
Oct 12 13:53:18 linvdr auth.err sshd[3127]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:53:18 linvdr auth.err PAM-env[3127]: Unable to open config file: No such file or directory
Oct 12 13:54:07 linvdr daemon.info init: ^MStarting pid 4195, console /dev/console: '/etc/init.d/rcShutdown'
Oct 12 13:54:08 linvdr user.info kernel: [ 234.024912] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:54:08 linvdr user.info kernel: [ 234.031501] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:54:08 linvdr user.info kernel: [ 234.083550] bt878(0): unloading
Oct 12 13:54:08 linvdr user.debug kernel: [ 234.083758] bt878_mem: 0xf994a000.
Oct 12 13:54:08 linvdr user.info kernel: [ 234.083842] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.089649] bttv0: unloading
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.157949] saa7146: unregister extension 'budget_av'.
Oct 12 13:54:08 linvdr user.info kernel: [ 234.226934] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:54:08 linvdr user.warn kernel: [ 234.247332] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:54:09 linvdr user.warn kernel: [ 234.269897] saa7146: unregister extension 'budget dvb'.
Oct 12 13:54:09 linvdr user.warn kernel: [ 234.294286] saa7146: unregister extension 'dvb'.
Oct 12 13:54:09 linvdr user.info kernel: [ 234.329387] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:54:09 linvdr user.info kernel: [ 234.488869] ivtvfb: Unloading framebuffer module
Oct 12 13:54:09 linvdr user.info kernel: [ 235.159104] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:54:09 linvdr user.info kernel: [ 235.159316] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:54:10 linvdr user.info kernel: [ 235.271290] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:54:10 linvdr user.warn kernel: [ 235.274478] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:54:53 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.info kernel: [ 31.303013] ata2: EH complete
Oct 12 13:54:53 linvdr user.info kernel: [ 31.317564] ata1: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:53 linvdr user.info kernel: [ 31.317590] ata1: soft resetting port
Oct 12 13:54:53 linvdr user.info kernel: [ 31.357716] ata2: soft resetting port
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:53 linvdr user.info kernel: [ 31.478948] ata1: EH complete
Oct 12 13:54:53 linvdr user.info kernel: [ 31.518945] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:53 linvdr user.info kernel: [ 31.518966] ata2: soft resetting port
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 2 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:53 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Oct 12 13:54:53 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 31.679914] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 31.914591] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.075750] ata2: EH pending after completion, repeating EH (cnt=4)
Oct 12 13:54:54 linvdr user.info kernel: [ 32.075771] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.236921] ata2: EH complete
Oct 12 13:54:54 linvdr user.info kernel: [ 32.245744] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.info kernel: [ 32.406621] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.436159] ata2: soft resetting port
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.568654] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 12 13:54:54 linvdr user.info kernel: GSI 23 (level, low) -> IRQ 19
Oct 12 13:54:54 linvdr user.info kernel: f9, IRQ 19.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.573131] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 12 13:54:54 linvdr user.info kernel: [ 32.597590] ata2: EH complete
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Oct 12 13:54:54 linvdr user.info kernel: [ 32.616339] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Oct 12 13:54:54 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Oct 12 13:54:54 linvdr user.notice root: 0 device(s) removed.
Oct 12 13:54:55 linvdr user.info kernel: [ 32.864344] Linux video capture interface: v2.00
Oct 12 13:54:55 linvdr auth.info sshd[2774]: Server listening on 0.0.0.0 port 22.
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234184] ivtv: Start initialization, version 1.2.0
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234486] ivtv0: Initializing card #0
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234493] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:54:55 linvdr user.warn kernel: [ 33.234750] PCI: Enabling device 0000:00:0c.0 (0014 -> 0016)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234766] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 20
Oct 12 13:54:55 linvdr user.info kernel: [ 33.234780] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2798, console /dev/tty1: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2799, console /dev/tty2: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2802, console /dev/tty3: '/sbin/getty'
Oct 12 13:54:55 linvdr daemon.info init: ^MStarting pid 2805, console /dev/tty4: '/sbin/getty'
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413683] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413924] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.413993] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414055] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414131] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414193] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:54:55 linvdr user.info kernel: [ 33.414255] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:54:55 linvdr user.info kernel: [ 33.658392] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.812716] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.823828] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel:
Oct 12 13:54:56 linvdr user.info kernel: [ 33.844939] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.845172] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:54:56 linvdr user.info kernel: [ 33.859307] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.862511] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.865701] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.868925] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.872119] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:54:56 linvdr user.info kernel: [ 33.875320] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.878562] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.881747] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882122] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882206] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:54:56 linvdr user.info kernel: [ 33.882304] ivtv: End initialization
Oct 12 13:54:56 linvdr user.info kernel: [ 34.615537] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:54:56 linvdr user.info kernel: [ 34.663865] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:54:57 linvdr user.info kernel: [ 34.866387] ivtv0: Encoder revision: 0x02060039
Oct 12 13:54:57 linvdr user.info kernel: [ 34.866753] ivtv0: Decoder revision: 0x02020023
Oct 12 13:54:57 linvdr user.info kernel: [ 34.961816] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:54:57 linvdr user.info kernel: [ 35.163136] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:54:57 linvdr user.info kernel: [ 35.271056] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:54:57 linvdr user.warn kernel: [ 35.528964] saa7146: register extension 'dvb'.
Oct 12 13:54:57 linvdr user.warn kernel: [ 35.532081] PCI: Enabling device 0000:00:0e.0 (0004 -> 0006)
Oct 12 13:54:57 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:54:57 linvdr user.warn kernel: found saa7146 @ mem f90ec000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:54:57 linvdr user.info kernel: [ 35.575840] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:54:58 linvdr user.warn kernel: [ 35.714654] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.050754] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.050968] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.143700] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:54:58 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:54:58 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.182031] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:54:58 linvdr user.info kernel: [ 36.188026] input: DVB on-card IR receiver as /class/input/input2
Oct 12 13:54:58 linvdr user.info kernel: [ 36.191188] dvb-ttpci: found av7110-0.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.225969] saa7146: register extension 'budget dvb'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.263970] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.285794] saa7146: register extension 'budget_av'.
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.288959] PCI: Enabling device 0000:00:0a.0 (0004 -> 0006)
Oct 12 13:54:58 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:58 linvdr user.warn kernel: found saa7146 @ mem f9918000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.289397] saa7146 (1): dma buffer size 192512
Oct 12 13:54:58 linvdr user.info kernel: [ 36.289458] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:54:58 linvdr user.warn kernel: [ 36.430387] adapter failed MAC signature check
Oct 12 13:54:58 linvdr user.warn kernel: ff
Oct 12 13:54:58 linvdr user.info kernel: [ 36.670804] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.827266] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:54:59 linvdr user.info kernel: [ 36.833418] budget-av: ci interface initialised.
Oct 12 13:54:59 linvdr user.info kernel: [ 36.886200] bttv: driver version 0.9.17 loaded
Oct 12 13:54:59 linvdr user.info kernel: [ 36.886428] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892393] bttv: Bt8xx card found (0).
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.892626] PCI: Enabling device 0000:00:0d.0 (0004 -> 0006)
Oct 12 13:54:59 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:59 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892871] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:54:59 linvdr user.info kernel: [ 36.892938] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:54:59 linvdr user.debug kernel: [ 36.893034] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:54:59 linvdr user.info kernel: [ 36.896086] bttv0: tuner absent
Oct 12 13:54:59 linvdr user.info kernel: [ 36.899320] bttv0: registered device video2
Oct 12 13:54:59 linvdr user.info kernel: [ 36.902510] bttv0: registered device vbi2
Oct 12 13:54:59 linvdr user.info kernel: ok
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.927349] bttv0: add subdevice "dvb0"
Oct 12 13:54:59 linvdr user.info kernel: [ 36.938498] input: bttv IR (card=123) as /class/input/input3
Oct 12 13:54:59 linvdr user.info kernel: [ 36.961444] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:54:59 linvdr user.info kernel: [ 36.961851] bt878: Bt878 AUDIO function found (0).
Oct 12 13:54:59 linvdr user.warn kernel: [ 36.961953] PCI: Enabling device 0000:00:0d.1 (0004 -> 0006)
Oct 12 13:54:59 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:54:59 linvdr user.info kernel: [ 36.962095] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:54:59 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:54:59 linvdr user.info kernel: [ 36.968250] DVB: registering new adapter (bttv0)
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.029636] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:54:59 linvdr user.info kernel: [ 37.070535] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:54:59 linvdr user.info kernel: [ 37.078876] flexcop-pci: will use the HW PID filter.
Oct 12 13:54:59 linvdr user.info kernel: [ 37.079086] flexcop-pci: card revision 2
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.079156] PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
Oct 12 13:54:59 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:54:59 linvdr user.info kernel: [ 37.083421] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:54:59 linvdr user.info kernel: [ 37.093975] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.097165] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:54:59 linvdr user.err kernel: [ 37.097694] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:54:59 linvdr user.err kernel: [ 37.298501] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:54:59 linvdr user.info kernel: [ 37.298807] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.298884] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:54:59 linvdr user.info kernel: [ 37.301932] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:54:59 linvdr user.info kernel: [ 37.351321] i2c /dev entries driver
Oct 12 13:54:59 linvdr user.info kernel: [ 37.411206] lirc_dev: IR Remote Control driver registered, major 61
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.412955] lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Oct 12 13:54:59 linvdr user.info kernel: [ 37.416647]
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.416651] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.416908] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:54:59 linvdr user.info kernel: [ 37.421619] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:54:59 linvdr user.warn kernel: [ 37.443325] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:54:59 linvdr user.info kernel: [ 37.453348] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:55:00 linvdr user.info vdr: [3076] VDR version 1.4.7-tt-ext40 started
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/setup.conf
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: noEPG =
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/sources.conf
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/diseqc.conf
Oct 12 13:55:00 linvdr user.info vdr: [3076] loading /etc/vdr/channels.conf
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: unknown parameter key 'P'
Oct 12 13:55:00 linvdr user.err vdr: [3076] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: tvonscreen
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: skinelchi
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: pvrinput
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: mplayer
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: femon
Oct 12 13:55:00 linvdr user.info vdr: [3076] deleting plugin: dvd
Oct 12 13:55:00 linvdr user.debug vdr: [3076] max. latency time 0 seconds
Oct 12 13:55:00 linvdr user.info vdr: [3076] exiting
Oct 12 13:55:19 linvdr auth.info sshd[3093]: Could not reverse map address 192.168.1.8.
Oct 12 13:55:19 linvdr auth.info sshd[3093]: Accepted password for root from 192.168.1.8 port 2983 ssh2
Oct 12 13:55:19 linvdr auth.info PAM_unix[3093]: (ssh) session opened for user root by (uid=0)
Oct 12 13:55:19 linvdr auth.err PAM-env[3093]: Unable to open config file: No such file or directory
Oct 12 13:55:19 linvdr auth.err PAM-env[3094]: Unable to open config file: No such file or directory
Oct 12 13:55:26 linvdr cron.notice crond[3114]: crond 2.3.2 dillon, started, log level 8
Oct 12 13:56:02 linvdr auth.info sshd[3121]: Could not reverse map address 192.168.1.8.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.816759] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:56:03 linvdr user.info kernel: [ 100.823271] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:56:03 linvdr user.info kernel: [ 100.875489] bt878(0): unloading
Oct 12 13:56:03 linvdr user.debug kernel: [ 100.875726] bt878_mem: 0xf9044000.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.875808] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.882064] bttv0: unloading
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.948743] saa7146: unregister extension 'budget_av'.
Oct 12 13:56:03 linvdr user.info kernel: [ 100.966726] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:56:03 linvdr user.warn kernel: [ 100.987621] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:56:03 linvdr user.warn kernel: [ 101.009939] saa7146: unregister extension 'budget dvb'.
Oct 12 13:56:03 linvdr user.warn kernel: [ 101.034383] saa7146: unregister extension 'dvb'.
Oct 12 13:56:03 linvdr user.info kernel: [ 101.066735] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:56:03 linvdr user.info kernel: [ 101.225867] ivtvfb: Unloading framebuffer module
Oct 12 13:56:04 linvdr user.info kernel: [ 101.896581] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:56:04 linvdr user.info kernel: [ 101.896832] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:56:04 linvdr user.info kernel: [ 102.030935] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:56:04 linvdr user.warn kernel: [ 102.034102] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:56:06 linvdr auth.notice PAM_unix[3121]: authentication failure; (uid=0) -> root for ssh service
Oct 12 13:56:07 linvdr auth.info sshd[3121]: Failed password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:09 linvdr user.info kernel: [ 107.247652] ivtv: Start initialization, version 1.2.0
Oct 12 13:56:09 linvdr user.info kernel: [ 107.250991] ivtv0: Initializing card #0
Oct 12 13:56:09 linvdr user.info kernel: [ 107.251243] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:56:09 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306177] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306386] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306454] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306518] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306580] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306641] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:56:09 linvdr user.info kernel: [ 107.306704] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:56:09 linvdr user.info kernel: [ 107.380837] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.534973] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.546548] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel:
Oct 12 13:56:09 linvdr user.info kernel: [ 107.568583] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.568816] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:56:09 linvdr user.info kernel: [ 107.583624] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.586804] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.589984] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.593132] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.596376] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:56:09 linvdr user.info kernel: [ 107.599548] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.602741] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604227] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604597] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604679] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:56:09 linvdr user.info kernel: [ 107.604778] ivtv: End initialization
Oct 12 13:56:10 linvdr user.info kernel: [ 108.297736] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:56:10 linvdr user.info kernel: [ 108.326965] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:56:10 linvdr user.info kernel: [ 108.529100] ivtv0: Encoder revision: 0x02060039
Oct 12 13:56:10 linvdr user.info kernel: [ 108.529450] ivtv0: Decoder revision: 0x02020023
Oct 12 13:56:10 linvdr user.info kernel: [ 108.612936] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:56:11 linvdr user.info kernel: [ 108.814858] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:56:11 linvdr user.info kernel: [ 108.922759] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.099252] saa7146: register extension 'dvb'.
Oct 12 13:56:11 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:56:11 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:56:11 linvdr user.info kernel: [ 109.126401] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.250405] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.586497] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:56:11 linvdr user.warn kernel: [ 109.586709] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.679444] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:56:12 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:56:12 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.717791] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:56:12 linvdr user.info kernel: [ 109.723959] input: DVB on-card IR receiver as /class/input/input4
Oct 12 13:56:12 linvdr user.info kernel: [ 109.727174] dvb-ttpci: found av7110-0.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.761172] saa7146: register extension 'budget dvb'.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.788663] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.810239] saa7146: register extension 'budget_av'.
Oct 12 13:56:12 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:56:12 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.813824] saa7146 (1): dma buffer size 192512
Oct 12 13:56:12 linvdr user.info kernel: [ 109.813887] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:56:12 linvdr user.warn kernel: [ 109.955139] adapter failed MAC signature check
Oct 12 13:56:12 linvdr user.warn kernel: ff
Oct 12 13:56:12 linvdr auth.info sshd[3121]: Failed password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:12 linvdr user.info kernel: [ 110.195554] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.315023] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:56:12 linvdr user.info kernel: [ 110.321136] budget-av: ci interface initialised.
Oct 12 13:56:12 linvdr user.info kernel: [ 110.354748] bttv: driver version 0.9.17 loaded
Oct 12 13:56:12 linvdr user.info kernel: [ 110.354962] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:56:12 linvdr user.info kernel: [ 110.360947] bttv: Bt8xx card found (0).
Oct 12 13:56:12 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:56:12 linvdr user.info kernel: [ 110.361297] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:56:12 linvdr user.info kernel: [ 110.361366] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:56:12 linvdr user.debug kernel: [ 110.361462] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:56:12 linvdr user.info kernel: [ 110.364545] bttv0: tuner absent
Oct 12 13:56:12 linvdr user.info kernel: [ 110.367724] bttv0: registered device video2
Oct 12 13:56:12 linvdr user.info kernel: [ 110.370917] bttv0: registered device vbi2
Oct 12 13:56:12 linvdr user.info kernel: ok
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.385171] bttv0: add subdevice "dvb0"
Oct 12 13:56:12 linvdr user.info kernel: [ 110.400038] input: bttv IR (card=123) as /class/input/input5
Oct 12 13:56:12 linvdr user.info kernel: [ 110.411391] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:56:12 linvdr user.info kernel: [ 110.413222] bt878: Bt878 AUDIO function found (0).
Oct 12 13:56:12 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:56:12 linvdr user.info kernel: [ 110.413539] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:56:12 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:56:12 linvdr user.info kernel: [ 110.428190] DVB: registering new adapter (bttv0)
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.487377] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:56:12 linvdr user.info kernel: [ 110.522265] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:56:12 linvdr user.info kernel: [ 110.530256] flexcop-pci: will use the HW PID filter.
Oct 12 13:56:12 linvdr user.info kernel: [ 110.530470] flexcop-pci: card revision 2
Oct 12 13:56:12 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:56:12 linvdr user.info kernel: [ 110.534221] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:56:12 linvdr user.info kernel: [ 110.544864] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:56:12 linvdr user.warn kernel: [ 110.548039] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:56:12 linvdr user.err kernel: [ 110.548575] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:56:13 linvdr user.err kernel: [ 110.749272] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:56:13 linvdr user.info kernel: [ 110.749608] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.749689] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:56:13 linvdr user.info kernel: [ 110.752841] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:56:13 linvdr user.info kernel: [ 110.777380] i2c /dev entries driver
Oct 12 13:56:13 linvdr user.info kernel: [ 110.804187]
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.804191] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.804457] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:56:13 linvdr user.info kernel: [ 110.807653] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:56:13 linvdr user.warn kernel: [ 110.827855] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:56:13 linvdr user.info kernel: [ 110.843883] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:56:13 linvdr user.info vdr: [3622] VDR version 1.4.7-tt-ext40 started
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/setup.conf
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: noEPG =
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/sources.conf
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/diseqc.conf
Oct 12 13:56:13 linvdr user.info vdr: [3622] loading /etc/vdr/channels.conf
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: unknown parameter key 'P'
Oct 12 13:56:13 linvdr user.err vdr: [3622] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: tvonscreen
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: skinelchi
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: pvrinput
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: mplayer
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: femon
Oct 12 13:56:13 linvdr user.info vdr: [3622] deleting plugin: dvd
Oct 12 13:56:13 linvdr user.debug vdr: [3622] max. latency time 0 seconds
Oct 12 13:56:13 linvdr user.info vdr: [3622] exiting
Oct 12 13:56:14 linvdr auth.info sshd[3121]: Accepted password for root from 192.168.1.8 port 2984 ssh2
Oct 12 13:56:14 linvdr auth.info PAM_unix[3121]: (ssh) session opened for user root by (uid=0)
Oct 12 13:56:14 linvdr auth.err PAM-env[3121]: Unable to open config file: No such file or directory
Oct 12 13:56:14 linvdr auth.err PAM-env[3637]: Unable to open config file: No such file or directory
Oct 12 13:57:09 linvdr user.info kernel: [ 166.938458] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:57:09 linvdr user.info kernel: [ 166.945041] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:57:09 linvdr user.info kernel: [ 166.997080] bt878(0): unloading
Oct 12 13:57:09 linvdr user.debug kernel: [ 166.997313] bt878_mem: 0xf994a000.
Oct 12 13:57:09 linvdr user.info kernel: [ 166.997397] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.003734] bttv0: unloading
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.071067] saa7146: unregister extension 'budget_av'.
Oct 12 13:57:09 linvdr user.info kernel: [ 167.088227] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.110037] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.132728] saa7146: unregister extension 'budget dvb'.
Oct 12 13:57:09 linvdr user.warn kernel: [ 167.157269] saa7146: unregister extension 'dvb'.
Oct 12 13:57:09 linvdr user.info kernel: [ 167.193628] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:57:09 linvdr user.info kernel: [ 167.351755] ivtvfb: Unloading framebuffer module
Oct 12 13:57:10 linvdr user.info kernel: [ 168.023052] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:57:10 linvdr user.info kernel: [ 168.023288] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:57:10 linvdr user.info kernel: [ 168.134554] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:57:10 linvdr user.warn kernel: [ 168.137833] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:57:14 linvdr user.info kernel: [ 172.518681] ivtv: Start initialization, version 1.2.0
Oct 12 13:57:14 linvdr user.info kernel: [ 172.522050] ivtv0: Initializing card #0
Oct 12 13:57:14 linvdr user.info kernel: [ 172.522327] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:57:14 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577565] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577772] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577839] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577902] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.577963] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:57:14 linvdr user.info kernel: [ 172.578024] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:57:14 linvdr user.info kernel: [ 172.578092] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:57:15 linvdr user.info kernel: [ 172.652753] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.807240] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.818840] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel:
Oct 12 13:57:15 linvdr user.info kernel: [ 172.840936] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.841180] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:57:15 linvdr user.info kernel: [ 172.855962] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.859239] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.862433] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.865660] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.868870] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:57:15 linvdr user.info kernel: [ 172.872154] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.875383] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.878605] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879010] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879094] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:57:15 linvdr user.info kernel: [ 172.879193] ivtv: End initialization
Oct 12 13:57:15 linvdr user.info kernel: [ 173.568732] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:57:15 linvdr user.info kernel: [ 173.603477] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:57:16 linvdr user.info kernel: [ 173.803890] ivtv0: Encoder revision: 0x02060039
Oct 12 13:57:16 linvdr user.info kernel: [ 173.804131] ivtv0: Decoder revision: 0x02020023
Oct 12 13:57:16 linvdr user.info kernel: [ 173.887859] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:57:16 linvdr user.info kernel: [ 174.088662] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:57:16 linvdr user.info kernel: [ 174.196560] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:57:16 linvdr user.warn kernel: [ 174.374306] saa7146: register extension 'dvb'.
Oct 12 13:57:16 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:57:16 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:57:16 linvdr user.info kernel: [ 174.401760] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:57:16 linvdr user.warn kernel: [ 174.525204] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.861303] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.861538] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.954250] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:57:17 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:57:17 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:57:17 linvdr user.warn kernel: [ 174.992590] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:57:17 linvdr user.info kernel: [ 174.998829] input: DVB on-card IR receiver as /class/input/input6
Oct 12 13:57:17 linvdr user.info kernel: [ 175.002113] dvb-ttpci: found av7110-0.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.036527] saa7146: register extension 'budget dvb'.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.064184] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.085992] saa7146: register extension 'budget_av'.
Oct 12 13:57:17 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:57:17 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.089589] saa7146 (1): dma buffer size 192512
Oct 12 13:57:17 linvdr user.info kernel: [ 175.089653] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.230947] adapter failed MAC signature check
Oct 12 13:57:17 linvdr user.warn kernel: ff
Oct 12 13:57:17 linvdr user.info kernel: [ 175.471360] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:57:17 linvdr user.warn kernel: [ 175.590830] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:57:17 linvdr user.info kernel: [ 175.597055] budget-av: ci interface initialised.
Oct 12 13:57:18 linvdr user.info kernel: [ 175.630889] bttv: driver version 0.9.17 loaded
Oct 12 13:57:18 linvdr user.info kernel: [ 175.631136] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637114] bttv: Bt8xx card found (0).
Oct 12 13:57:18 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637446] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:57:18 linvdr user.info kernel: [ 175.637514] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:57:18 linvdr user.debug kernel: [ 175.637610] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:57:18 linvdr user.info kernel: [ 175.640025] bttv0: tuner absent
Oct 12 13:57:18 linvdr user.info kernel: [ 175.643276] bttv0: registered device video2
Oct 12 13:57:18 linvdr user.info kernel: [ 175.646996] bttv0: registered device vbi2
Oct 12 13:57:18 linvdr user.info kernel: ok
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.658201] bttv0: add subdevice "dvb0"
Oct 12 13:57:18 linvdr user.info kernel: [ 175.660147] input: bttv IR (card=123) as /class/input/input7
Oct 12 13:57:18 linvdr user.info kernel: [ 175.693831] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:57:18 linvdr user.info kernel: [ 175.694203] bt878: Bt878 AUDIO function found (0).
Oct 12 13:57:18 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:57:18 linvdr user.info kernel: [ 175.694379] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:57:18 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:57:18 linvdr user.info kernel: [ 175.705960] DVB: registering new adapter (bttv0)
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.763420] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:57:18 linvdr user.info kernel: [ 175.797125] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:57:18 linvdr user.info kernel: [ 175.805143] flexcop-pci: will use the HW PID filter.
Oct 12 13:57:18 linvdr user.info kernel: [ 175.805355] flexcop-pci: card revision 2
Oct 12 13:57:18 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:57:18 linvdr user.info kernel: [ 175.809008] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:57:18 linvdr user.info kernel: [ 175.819641] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:57:18 linvdr user.warn kernel: [ 175.822833] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:57:18 linvdr user.err kernel: [ 175.823366] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:57:18 linvdr user.err kernel: [ 176.024075] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:57:18 linvdr user.info kernel: [ 176.024380] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.024456] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:57:18 linvdr user.info kernel: [ 176.027498] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:57:18 linvdr user.info kernel: [ 176.051985] i2c /dev entries driver
Oct 12 13:57:18 linvdr user.info kernel: [ 176.078967]
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.078971] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.079240] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:57:18 linvdr user.info kernel: [ 176.082572] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:57:18 linvdr user.warn kernel: [ 176.104733] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:57:18 linvdr user.info kernel: [ 176.120752] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:57:18 linvdr user.info vdr: [4148] VDR version 1.4.7-tt-ext40 started
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/setup.conf
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: noEPG =
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/sources.conf
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/diseqc.conf
Oct 12 13:57:18 linvdr user.info vdr: [4148] loading /etc/vdr/channels.conf
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: unknown parameter key 'P'
Oct 12 13:57:18 linvdr user.err vdr: [4148] ERROR: error in /etc/vdr/channels.conf, line 15
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: tvonscreen
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: skinelchi
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: pvrinput
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: mplayer
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: femon
Oct 12 13:57:18 linvdr user.info vdr: [4148] deleting plugin: dvd
Oct 12 13:57:18 linvdr user.debug vdr: [4148] max. latency time 0 seconds
Oct 12 13:57:18 linvdr user.info vdr: [4148] exiting
Oct 12 13:57:44 linvdr user.info kernel: [ 201.860496] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
Oct 12 13:57:44 linvdr user.info kernel: [ 201.867049] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
Oct 12 13:57:44 linvdr user.info kernel: [ 201.919441] bt878(0): unloading
Oct 12 13:57:44 linvdr user.debug kernel: [ 201.919647] bt878_mem: 0xf994a000.
Oct 12 13:57:44 linvdr user.info kernel: [ 201.919732] ACPI: PCI interrupt for device 0000:00:0d.1 disabled
Oct 12 13:57:44 linvdr user.warn kernel: [ 201.925103] bttv0: unloading
Oct 12 13:57:44 linvdr user.warn kernel: [ 201.993973] saa7146: unregister extension 'budget_av'.
Oct 12 13:57:44 linvdr user.info kernel: [ 202.012288] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.032723] saa7146: unregister extension 'budget_ci dvb'.
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.055267] saa7146: unregister extension 'budget dvb'.
Oct 12 13:57:44 linvdr user.warn kernel: [ 202.079689] saa7146: unregister extension 'dvb'.
Oct 12 13:57:44 linvdr user.info kernel: [ 202.114370] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
Oct 12 13:57:44 linvdr user.info kernel: [ 202.274693] ivtvfb: Unloading framebuffer module
Oct 12 13:57:45 linvdr user.info kernel: [ 202.945533] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
Oct 12 13:57:45 linvdr user.info kernel: [ 202.945783] ivtv0: Removed Hauppauge WinTV PVR-350, card #0
Oct 12 13:57:45 linvdr user.info kernel: [ 203.057372] usbcore: deregistering interface driver lirc_atiusb
Oct 12 13:57:45 linvdr user.warn kernel: [ 203.060544] lirc_atiusb[3]: usb remote disconnected
Oct 12 13:58:10 linvdr auth.info sshd[4424]: Could not reverse map address 192.168.1.8.
Oct 12 13:58:10 linvdr auth.info sshd[4424]: Accepted password for root from 192.168.1.8 port 2986 ssh2
Oct 12 13:58:10 linvdr auth.info PAM_unix[4424]: (ssh) session opened for user root by (uid=0)
Oct 12 13:58:10 linvdr auth.err PAM-env[4424]: Unable to open config file: No such file or directory
Oct 12 13:58:10 linvdr auth.err PAM-env[4425]: Unable to open config file: No such file or directory
Oct 12 13:58:22 linvdr user.info kernel: [ 239.698784] ivtv: Start initialization, version 1.2.0
Oct 12 13:58:22 linvdr user.info kernel: [ 239.702164] ivtv0: Initializing card #0
Oct 12 13:58:22 linvdr user.info kernel: [ 239.702441] ivtv0: Autodetected Hauppauge card (cx23415 based)
Oct 12 13:58:22 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:58:22 linvdr user.info kernel: [ 239.754781] tveeprom 0-0050: Hauppauge model 48134, rev J321, serial# 2771229
Oct 12 13:58:22 linvdr user.info kernel: [ 239.754985] tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755054] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755129] tveeprom 0-0050: audio processor is MSP4418 (idx 25)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755199] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755261] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Oct 12 13:58:22 linvdr user.info kernel: [ 239.755323] ivtv0: Autodetected Hauppauge WinTV PVR-350
Oct 12 13:58:22 linvdr user.info kernel: [ 239.830006] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.984767] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 239.996395] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel:
Oct 12 13:58:22 linvdr user.info kernel: [ 240.018619] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.018853] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Oct 12 13:58:22 linvdr user.info kernel: [ 240.033750] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.036965] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.040262] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.043510] ivtv0: Registered device video24 for encoder PCM (320 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.046739] ivtv0: Registered device radio0 for encoder radio
Oct 12 13:58:22 linvdr user.info kernel: [ 240.050023] ivtv0: Registered device video16 for decoder MPG (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.053254] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056484] ivtv0: Registered device vbi16 for decoder VOUT
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056862] ivtv0: Registered device video48 for decoder YUV (1024 kB)
Oct 12 13:58:22 linvdr user.info kernel: [ 240.056945] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
Oct 12 13:58:22 linvdr user.info kernel: [ 240.057044] ivtv: End initialization
Oct 12 13:58:23 linvdr user.info kernel: [ 240.744989] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 240.776439] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 240.979000] ivtv0: Encoder revision: 0x02060039
Oct 12 13:58:23 linvdr user.info kernel: [ 240.979349] ivtv0: Decoder revision: 0x02020023
Oct 12 13:58:23 linvdr user.info kernel: [ 241.064357] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
Oct 12 13:58:23 linvdr user.info kernel: [ 241.268738] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9e90000, size 1665k
Oct 12 13:58:23 linvdr user.info kernel: [ 241.376663] ivtvfb0: Framebuffer registered on ivtv card id 0
Oct 12 13:58:23 linvdr user.warn kernel: [ 241.554103] saa7146: register extension 'dvb'.
Oct 12 13:58:23 linvdr user.info kernel: GSI 17 (level, low) -> IRQ 21
Oct 12 13:58:23 linvdr user.warn kernel: found saa7146 @ mem f906e000 (revision 1, irq 21) (0x110a,0x0000).
Oct 12 13:58:23 linvdr user.info kernel: [ 241.581222] DVB: registering new adapter (Fujitsu Siemens DVB-C)
Oct 12 13:58:24 linvdr user.warn kernel: [ 241.705303] adapter has MAC addr = 00:d0:5c:02:04:63
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.041402] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.041624] dvb-ttpci: firmware @ card 0 supports CI link layer interface
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.134349] dvb-ttpci: DVB-C w/o analog module @ card 0 detected
Oct 12 13:58:24 linvdr user.warn kernel: saa7146 (0): registered device video1 [v4l2]
Oct 12 13:58:24 linvdr user.warn kernel: saa7146 (0): registered device vbi1 [v4l2]
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.172685] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
Oct 12 13:58:24 linvdr user.info kernel: [ 242.176099] input: DVB on-card IR receiver as /class/input/input8
Oct 12 13:58:24 linvdr user.info kernel: [ 242.179335] dvb-ttpci: found av7110-0.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.216587] saa7146: register extension 'budget dvb'.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.244194] saa7146: register extension 'budget_ci dvb'.
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.266152] saa7146: register extension 'budget_av'.
Oct 12 13:58:24 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:58:24 linvdr user.warn kernel: found saa7146 @ mem f90d8000 (revision 1, irq 22) (0x153b,0x1176).
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.269767] saa7146 (1): dma buffer size 192512
Oct 12 13:58:24 linvdr user.info kernel: [ 242.269829] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C MK3)
Oct 12 13:58:24 linvdr user.warn kernel: [ 242.411039] adapter failed MAC signature check
Oct 12 13:58:24 linvdr user.warn kernel: ff
Oct 12 13:58:25 linvdr user.info kernel: [ 242.651456] KNC1-1: MAC addr = 00:0a:ac:11:3a:ee
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.770926] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...
Oct 12 13:58:25 linvdr user.info kernel: [ 242.776136] budget-av: ci interface initialised.
Oct 12 13:58:25 linvdr user.info kernel: [ 242.811323] bttv: driver version 0.9.17 loaded
Oct 12 13:58:25 linvdr user.info kernel: [ 242.811539] bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817586] bttv: Bt8xx card found (0).
Oct 12 13:58:25 linvdr user.info kernel: irq: 22, latency: 32, mmio: 0xe7800000
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817915] bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
Oct 12 13:58:25 linvdr user.info kernel: [ 242.817982] bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
Oct 12 13:58:25 linvdr user.debug kernel: [ 242.818101] bttv0: gpio: en=00000000, out=00000000 in=00d0e30f [init]
Oct 12 13:58:25 linvdr user.info kernel: [ 242.821153] bttv0: tuner absent
Oct 12 13:58:25 linvdr user.info kernel: [ 242.823114] bttv0: registered device video2
Oct 12 13:58:25 linvdr user.info kernel: [ 242.826100] bttv0: registered device vbi2
Oct 12 13:58:25 linvdr user.info kernel: ok
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.837401] bttv0: add subdevice "dvb0"
Oct 12 13:58:25 linvdr user.info kernel: [ 242.840550] input: bttv IR (card=123) as /class/input/input9
Oct 12 13:58:25 linvdr user.info kernel: [ 242.873972] bt878: AUDIO driver version 0.0.0 loaded
Oct 12 13:58:25 linvdr user.info kernel: [ 242.874342] bt878: Bt878 AUDIO function found (0).
Oct 12 13:58:25 linvdr user.info kernel: GSI 16 (level, low) -> IRQ 22
Oct 12 13:58:25 linvdr user.info kernel: [ 242.874517] bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions.
Oct 12 13:58:25 linvdr user.info kernel: irq: 22, latency: 32, memory: 0xe7000000
Oct 12 13:58:25 linvdr user.info kernel: [ 242.885135] DVB: registering new adapter (bttv0)
Oct 12 13:58:25 linvdr user.warn kernel: [ 242.943995] DVB: registering frontend 2 (Zarlink MT352 DVB-T)...
Oct 12 13:58:25 linvdr user.info kernel: [ 242.975688] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Oct 12 13:58:25 linvdr user.info kernel: [ 242.983707] flexcop-pci: will use the HW PID filter.
Oct 12 13:58:25 linvdr user.info kernel: [ 242.983925] flexcop-pci: card revision 2
Oct 12 13:58:25 linvdr user.info kernel: GSI 19 (level, low) -> IRQ 20
Oct 12 13:58:25 linvdr user.info kernel: [ 242.988115] DVB: registering new adapter (FlexCop Digital TV device)
Oct 12 13:58:25 linvdr user.info kernel: [ 242.998671] b2c2-flexcop: MAC address = 00:d0:d7:0a:94:06
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.001834] i2c-adapter i2c-4: SMBus Quick command not supported, can't probe for chips
Oct 12 13:58:25 linvdr user.err kernel: [ 243.002362] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:58:25 linvdr user.err kernel: [ 243.203175] b2c2-flexcop: i2c master_xfer failed
Oct 12 13:58:25 linvdr user.info kernel: [ 243.203481] b2c2-flexcop: found the mt352 at i2c address: 0x0f
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.203561] DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
Oct 12 13:58:25 linvdr user.info kernel: [ 243.206621] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Oct 12 13:58:25 linvdr user.info kernel: [ 243.231155] i2c /dev entries driver
Oct 12 13:58:25 linvdr user.info kernel: [ 243.259053]
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.259057] lirc_atiusb: USB remote driver for LIRC $Revision: 1.67 $
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.259313] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
Oct 12 13:58:25 linvdr user.info kernel: [ 243.261662] lirc_dev: lirc_register_plugin: sample_rate: 0
Oct 12 13:58:25 linvdr user.warn kernel: [ 243.282124] lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb2:3
Oct 12 13:58:25 linvdr user.info kernel: [ 243.292145] usbcore: registered new interface driver lirc_atiusb
Oct 12 13:58:25 linvdr user.info vdr: [4696] VDR version 1.4.7-tt-ext40 started
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-skinelchi.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/setup.conf
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: noEPG =
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: RecordDolbyDigital = 1
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: SortTimers = 1
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.AntiFlickering = 0
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.DelayAfterTune = 50
Oct 12 13:58:25 linvdr user.err vdr: [4696] ERROR: unknown config parameter: pvrinput.VideoBitrate = 0
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/sources.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/diseqc.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/channels.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/timers.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/commands.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/reccmds.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/svdrphosts.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/remote.conf
Oct 12 13:58:25 linvdr user.info vdr: [4696] loading /etc/vdr/keymacros.conf
Oct 12 13:58:25 linvdr user.debug vdr: [4702] video directory scanner thread started (pid=4702, tid=4702)
Oct 12 13:58:25 linvdr user.debug vdr: [4703] video directory scanner thread started (pid=4703, tid=4703)
Oct 12 13:58:25 linvdr user.debug vdr: [4696] reading EPG data from /ramdisk/epg.data
Oct 12 13:58:25 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter0/frontend0
Oct 12 13:58:27 linvdr user.debug vdr: [4703] video directory scanner thread ended (pid=4703, tid=4703)
Oct 12 13:58:27 linvdr user.debug vdr: [4702] video directory scanner thread ended (pid=4702, tid=4702)
Oct 12 13:58:28 linvdr user.debug vdr: [4705] tuner on device 1 thread started (pid=4705, tid=4705)
Oct 12 13:58:28 linvdr user.debug vdr: [4706] section handler thread started (pid=4706, tid=4706)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter1/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4708] tuner on device 2 thread started (pid=4708, tid=4708)
Oct 12 13:58:28 linvdr user.debug vdr: [4709] section handler thread started (pid=4709, tid=4709)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter2/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4711] tuner on device 3 thread started (pid=4711, tid=4711)
Oct 12 13:58:28 linvdr user.debug vdr: [4712] section handler thread started (pid=4712, tid=4712)
Oct 12 13:58:28 linvdr user.debug vdr: [4696] probing /dev/dvb/adapter3/frontend0
Oct 12 13:58:28 linvdr user.debug vdr: [4714] tuner on device 4 thread started (pid=4714, tid=4714)
Oct 12 13:58:28 linvdr user.debug vdr: [4715] section handler thread started (pid=4715, tid=4715)
Oct 12 13:58:28 linvdr user.info vdr: [4696] found 4 video devices
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: femon (1.1.3): DVB Signal Information Monitor (OSD)
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: mplayer (0.10.1): Media replay via MPlayer
Oct 12 13:58:28 linvdr user.info vdr: [4696] loading /etc/vdr/plugins/mplayersources.conf
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: pvrinput (2008-10-04): use Hauppauge PVR as input device
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: skinelchi (0.1.1pre1): Elchi VDR Skin-Plugin
Oct 12 13:58:28 linvdr user.info vdr: [4696] initializing plugin: tvonscreen (0.7.1): Shows the EPG info in form of a typical TV magazine
Oct 12 13:58:28 linvdr user.info vdr: [4696] setting primary device to 1
Oct 12 13:58:28 linvdr user.info vdr: [4696] SVDRP listening on port 2001
Oct 12 13:58:28 linvdr user.info vdr: [4696] skin "Elchi_Plugin" not available - using "classic" instead
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: dvd
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: femon
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: mplayer
Oct 12 13:58:28 linvdr user.info vdr: [4696] starting plugin: pvrinput
Oct 12 13:58:29 linvdr user.info vdr: [4696] starting plugin: skinelchi
Oct 12 13:58:29 linvdr user.info vdr: [4696] loading /etc/vdr/plugins/skinelchi/../../themes/Elchi_Plugin-change.theme
Oct 12 13:58:29 linvdr user.info vdr: [4696] starting plugin: tvonscreen
Oct 12 13:58:29 linvdr user.info vdr: [4696] setting current skin to "Elchi_Plugin"
Oct 12 13:58:29 linvdr user.info vdr: [4696] loading /etc/vdr/themes/Elchi_Plugin-change.theme
Oct 12 13:58:29 linvdr user.debug vdr: [4727] LIRC remote control thread started (pid=4727, tid=4727)
Oct 12 13:58:29 linvdr user.debug vdr: [4728] KBD remote control thread started (pid=4728, tid=4728)
Oct 12 13:58:29 linvdr user.debug vdr: [4696] remote control LIRC - keys known
Oct 12 13:58:29 linvdr user.debug vdr: [4696] remote control KBD - keys known
Oct 12 13:58:29 linvdr user.info vdr: [4696] switching to channel 1
Oct 12 13:58:29 linvdr user.debug vdr: [4729] transfer thread started (pid=4729, tid=4729)
Oct 12 13:58:29 linvdr user.debug vdr: [4730] receiver on device 3 thread started (pid=4730, tid=4730)
Oct 12 13:58:29 linvdr user.debug vdr: [4731] TS buffer on device 3 thread started (pid=4731, tid=4731)
Oct 12 13:58:29 linvdr user.debug vdr: [4696] setting watchdog timer to 900 seconds
Oct 12 13:58:29 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') set to event Mit 15.10.2008 00:11-00:43 'Kalkofes Mattscheibe'
Oct 12 13:58:31 linvdr user.info vdr: [4696] connect from 127.0.0.1, port 45682 - accepted
Oct 12 13:58:31 linvdr user.err vdr: [4696] pvrinput: no translation found for 'use Hauppauge PVR as input device' in language 1 (Deutsch)
Oct 12 13:58:31 linvdr user.err vdr: [4696] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Oct 12 13:58:33 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') modified (active)
Oct 12 13:58:34 linvdr user.info vdr: [4696] timer 1 (11 0001-0053 'Kalkofes Mattscheibe~2008-10-15') set to event Mit 15.10.2008 00:11-00:43 'Kalkofes Mattscheibe'
Oct 12 13:58:34 linvdr user.info vdr: [4696] closing SVDRP connection
Oct 12 13:58:34 linvdr user.info vdr: [4696] switching to channel 2
Oct 12 13:58:34 linvdr user.debug vdr: [4729] transfer thread ended (pid=4729, tid=4729)
Oct 12 13:58:34 linvdr user.debug vdr: [4731] TS buffer on device 3 thread ended (pid=4731, tid=4731)
Oct 12 13:58:34 linvdr user.debug vdr: [4730] buffer stats: 35908 (1%) used
Oct 12 13:58:34 linvdr user.debug vdr: [4730] receiver on device 3 thread ended (pid=4730, tid=4730)
Oct 12 13:58:34 linvdr user.debug vdr: [4696] buffer stats: 36284 (1%) used
Oct 12 13:58:34 linvdr user.debug vdr: [4735] transfer thread started (pid=4735, tid=4735)
Oct 12 13:58:34 linvdr user.debug vdr: [4736] receiver on device 3 thread started (pid=4736, tid=4736)
Oct 12 13:58:34 linvdr user.debug vdr: [4737] TS buffer on device 3 thread started (pid=4737, tid=4737)
Oct 12 13:58:37 linvdr user.info vdr: [4696] switching to channel 3
Oct 12 13:58:37 linvdr user.debug vdr: [4735] transfer thread ended (pid=4735, tid=4735)
Oct 12 13:58:37 linvdr user.debug vdr: [4737] TS buffer on device 3 thread ended (pid=4737, tid=4737)
Oct 12 13:58:37 linvdr user.debug vdr: [4736] buffer stats: 36660 (1%) used
Oct 12 13:58:37 linvdr user.debug vdr: [4736] receiver on device 3 thread ended (pid=4736, tid=4736)
Oct 12 13:58:37 linvdr user.debug vdr: [4696] buffer stats: 59032 (2%) used
Oct 12 13:58:37 linvdr user.debug vdr: [4738] transfer thread started (pid=4738, tid=4738)
Oct 12 13:58:37 linvdr user.debug vdr: [4739] receiver on device 3 thread started (pid=4739, tid=4739)
Oct 12 13:58:37 linvdr user.debug vdr: [4740] TS buffer on device 3 thread started (pid=4740, tid=4740)
Oct 12 13:58:40 linvdr user.info vdr: [4696] switching to channel 16
Oct 12 13:58:40 linvdr user.debug vdr: [4738] transfer thread ended (pid=4738, tid=4738)
Oct 12 13:58:40 linvdr user.debug vdr: [4740] TS buffer on device 3 thread ended (pid=4740, tid=4740)
Oct 12 13:58:40 linvdr user.debug vdr: [4739] buffer stats: 66176 (3%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4739] receiver on device 3 thread ended (pid=4739, tid=4739)
Oct 12 13:58:40 linvdr user.debug vdr: [4696] buffer stats: 97572 (4%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4696] max. latency time 1 seconds
Oct 12 13:58:40 linvdr user.err vdr: [4705] ERROR: frontend 0: Invalid argument
Oct 12 13:58:40 linvdr user.warn kernel: [ 258.291541] DVB: frontend 0 symbol rate 0 out of range (451875..7230000)
Oct 12 13:58:43 linvdr user.info vdr: [4696] switching to channel 17
Oct 12 13:58:43 linvdr user.debug vdr: [4742] transfer thread started (pid=4742, tid=4742)
Oct 12 13:58:43 linvdr user.debug vdr: [4743] receiver on device 5 thread started (pid=4743, tid=4743)
Oct 12 13:58:44 linvdr user.info vdr: [4696] switching to channel 18
Oct 12 13:58:44 linvdr user.debug vdr: [4742] transfer thread ended (pid=4742, tid=4742)
Oct 12 13:58:44 linvdr user.debug vdr: [4743] receiver on device 5 thread ended (pid=4743, tid=4743)
Oct 12 13:58:44 linvdr user.debug vdr: [4696] buffer stats: 137052 (6%) used
Oct 12 13:58:45 linvdr user.debug vdr: [4745] transfer thread started (pid=4745, tid=4745)
Oct 12 13:58:45 linvdr user.debug vdr: [4746] receiver on device 5 thread started (pid=4746, tid=4746)
Oct 12 13:58:46 linvdr user.info vdr: [4696] switching to channel 23
Oct 12 13:58:46 linvdr user.debug vdr: [4745] transfer thread ended (pid=4745, tid=4745)
Oct 12 13:58:46 linvdr user.debug vdr: [4746] receiver on device 5 thread ended (pid=4746, tid=4746)
Oct 12 13:58:46 linvdr user.debug vdr: [4696] buffer stats: 134420 (6%) used
Oct 12 13:58:47 linvdr user.debug vdr: [4748] transfer thread started (pid=4748, tid=4748)
Oct 12 13:58:47 linvdr user.debug vdr: [4749] receiver on device 5 thread started (pid=4749, tid=4749)
Oct 12 13:58:50 linvdr auth.info PAM_unix[3121]: (ssh) session closed for user root
Oct 12 13:58:50 linvdr auth.err sshd[3121]: PAM pam_putenv: delete non-existent entry; MAIL
Oct 12 13:58:50 linvdr auth.err PAM-env[3121]: Unable to open config file: No such file or directory
Oct 12 13:59:56 linvdr user.info vdr: [4705] frontend 0 timed out while tuning to channel 149, tp 113

M@dMo · 12. Oktober 2008

Kann es daran liegen das ich im Menue den Tuner des Primaren Interfaces abgestellt habe oder gesagt das kein QAM256 auf Karten mit Encoder laufen sollen?

Dr. Seltsam · 12. Oktober 2008

Oct 12 13:58:40 linvdr user.info vdr: [4696] switching to channel 16
Oct 12 13:58:40 linvdr user.debug vdr: [4738] transfer thread ended (pid=4738, tid=473cool
Oct 12 13:58:40 linvdr user.debug vdr: [4740] TS buffer on device 3 thread ended (pid=4740, tid=4740)
Oct 12 13:58:40 linvdr user.debug vdr: [4739] buffer stats: 66176 (3%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4739] receiver on device 3 thread ended (pid=4739, tid=4739)
Oct 12 13:58:40 linvdr user.debug vdr: [4696] buffer stats: 97572 (4%) used
Oct 12 13:58:40 linvdr user.debug vdr: [4696] max. latency time 1 seconds
Oct 12 13:58:40 linvdr user.err vdr: [4705] ERROR: frontend 0: Invalid argument

ist Kanal 16 ein pvrinput-Kanal?

mein nächster Rat wäre jetzt, bis auf die FF und die PVR alle anderen Karten mal rauszunehmen und dann zu schauen.

Danach bräuchte ich mal die debug-Ausgabe des pvrinput-Plugins. Kannst Du per ssh das, was auf der Konsole geloggt wird, kopieren?

Die Vorgehensweise wäre wie folgt (ich gehe davon aus, dass Du ivtv in der runvdr lädst? sonst nach dem Stoopen von vdr nochmal ein "modprobe ivtv" machen):

/etc/init.d/runvdr stop
/etc/init.d/runvdr loaddriver
vdr -c /etc/vdr -v /video0 -L /usr/lib/vdr/plugins -Ppvrinput

jetzt startet vdr, und es wird auf die Konsole geloggt. Geh als nächstes in die pvrinput-Einstellungen und setze den loglevel auf 4. dann einen PVR-Kanal anwählen

Dr. Seltsam · 12. Oktober 2008

Zitat

Original von M@dMo
Hmm DVb_C will jetzt auch nicht mehr

was sagt dmesg?

Dr. Seltsam · 12. Oktober 2008

Zitat

Original von M@dMo
gesagt das kein QAM256 auf Karten mit Encoder laufen sollen?

das bezieht sich nur FF-Karten mit Dekoder. Aber es schadet zum Testen ja nichts, die beiden Einstellungen mal testweise zurückzunehmen. Obwohl ich da keinen Zusammenhang sehe.

M@dMo · 12. Oktober 2008

Ja kanal 16 da beginnen die Analogen Kanäle

bei /etc/init.d/runvdr loaddriver

sagt er

FATAL: Module video_buf not found.
FATAL: Module ivtv_fb not found.

wenn ich den vdr mit dem nachfolgenden starte, kann ich nicht umschalten

vdr -c /etc/vdr -v /video0 -L /usr/lib/vdr/plugins -Ppvrinput

linvdr:/# vdr -c /etc/vdr -v /video0 -L /usr/lib/vdr/plugins -Ppvrinput
pvrinput: 14:15:02 cPvrDevice::Probe():found Hauppauge WinTV PVR-350
pvrinput: 14:15:02 /dev/video0 = Hauppauge WinTV PVR-350
pvrinput: 14:15:02 BusID = 0000:00:0c.0
pvrinput: 14:15:02 ivtv Version 0x010200
pvrinput: 14:15:02 /dev/radio0 = FM radio dev
pvrinput: 14:15:02 QueryAllControls
pvrinput: 14:15:02 input 0 = Tuner 1
pvrinput: 14:15:02 input 1 = S-Video 1
pvrinput: 14:15:02 input 2 = Composite 1
pvrinput: 14:15:02 input 3 = S-Video 2
pvrinput: 14:15:02 input 4 = Composite 2
pvrinput: 14:15:02 input 5 = Composite 3
pvrinput: 14:15:02 cPvrDevice::SetInput to 0
pvrinput: 14:15:02 SetControlValue(Stream Type, 0)
pvrinput: 14:15:02 SetControlValue(Audio Encoding Layer, 1)
pvrinput: 14:15:02 SetControlValue(Video Peak Bitrate, 15000000)
pvrinput: 14:15:02 cPvrDevice::SetVideoSize
pvrinput: 14:15:02 SetVideoNorm(PAL)
pvrinput: 14:15:02 SetVBImode(PAL, 1)
pvrinput: 14:15:02 cPvrDevice::ReInit
pvrinput: 14:15:02 cPvrDevice::SetTunerAudioMode(bilingual)
pvrinput: 14:15:02 SetControlValue(Video Aspect, 0)
pvrinput: 14:15:02 SetControlValue(Audio Layer II Bitrate, 0)
pvrinput: 14:15:02 Info: setting value to default(10)
pvrinput: 14:15:02 SetControlValue(Audio Sampling Frequency, 0)
pvrinput: 14:15:02 SetControlValue(Video Bitrate, 6000000)
pvrinput: 14:15:02 SetControlValue(Video Bitrate Mode, 0)
pvrinput: 14:15:02 SetControlValue(Video GOP Size, 12)
pvrinput: 14:15:02 SetControlValue(Video GOP Closure, 1)
pvrinput: 14:15:02 SetControlValue(Video B Frames, 2)
pvrinput: 14:15:02 SetControlValue(Spatial Filter Mode, 0)
pvrinput: 14:15:02 SetControlValue(Spatial Filter, 0)
pvrinput: 14:15:02 SetControlValue(Spatial Luma Filter Type, 0)
pvrinput: 14:15:02 SetControlValue(Spatial Chroma Filter Type, 0)
pvrinput: 14:15:02 SetControlValue(Temporal Filter Mode, 0)
pvrinput: 14:15:02 SetControlValue(Temporal Filter, 0)
pvrinput: 14:15:02 SetControlValue(Median Filter Type, 0)
pvrinput: 14:15:02 SetControlValue(Median Luma Filter Minimum, 0)
pvrinput: 14:15:02 SetControlValue(Median Luma Filter Maximum, 0)
pvrinput: 14:15:02 SetControlValue(Median Chroma Filter Minimum, 0)
pvrinput: 14:15:02 SetControlValue(Median Chroma Filter Maximum, 0)
pvrinput: 14:15:02 SetControlValue(Brightness, 0)
pvrinput: 14:15:02 SetControlValue(Contrast, 0)
pvrinput: 14:15:02 SetControlValue(Saturation, 0)
pvrinput: 14:15:02 SetControlValue(Hue, 0)
pvrinput: 14:15:02 SetControlValue(Volume, 0)
pvrinput: 14:15:02 SetControlValue(Mute, 1)
pvrinput: 14:15:02 SetControlValue(Video Bitrate, 6000000)
pvrinput: 14:15:02 cPvrReadThread
pvrinput: 14:15:02 cPvrReadThread::Action(): Entering Action()
pvrinput: 14:15:02 cPvrDevice::Initialize(): found 1 PVR device

Nach PVR einbau fährt VDR nicht hoch

Jetzt mitmachen!

Teilen