ja na klar, vendor-id hab ich geändert
eigentlich hab ich alles genau so gemacht wie vorgegeben.
Aber mit den treibern vom 24.2 kann ich auch nicht wirklich einen videostream ausgeben...
Skystar HD2 / Cinergy S2 HD / Azurwave AP-400 / Twinhan 1041
- Hans77
- Geschlossen
-
-
Wo liegt denn das Problem 5piritus?
Bei mir ging das scannen zwar nur sporadisch, aber einige Kanäle konnte ich finden und die konnte ich dann auch per szap2 & mplayer schauen.
-
ich verwende vdr 1.7.0 und alles klappt.
vielleicht macht die entwickler version weniger propleme mit so neuen karten. -
ok, passt.
mit vdr-1.7.0 Funktioniert die karte ansatzweise.
Ein großes Problem hab ich aber noch:
Wie bekomm ich denn das CI-Modul zum laufen?
Mit der Nova-S von Hauppauge war das kein zusätzlicher aufwand, aber bei der cinergy könnt das ja wiedermal anders sein.
Wie sieht hier die treiberunterstützung aus?
Muss ich beim kompilieren des VDR beachten?
Danke!! -
Laut dem linuxdvb-wiki (das hier schon mehrmals verlinkt wurde), gibts für keine der im Threadtopic erwähnten Karten im Moment eine CI-Unterstützung.
Hier heißt es warten, hoffen und Daumen drücken.
-
im mantis treiber wird grad dran rumgebastelt must dir nur mal das
changelog durchlesen.
nimm neuesten treiber mit neuestem vdr. -
also ich kann mich erinnern dass bis vor kurzem der mantis treiber NICHT mit der cinergy funktioniert hat.
Und noch eine frage:
Was muss ich machen damit ich eigentlich die HD-Kanäle (zb Astra HD, ist ja nicht verschlüsselt) streamen kann?
Kann der vlc-player überhaupt diesen stream empfangen und ausgeben? -
Hi, ich habe auch die Cinergy S2, bekomme sie aber nicht zum laufen (Ubuntu 8.04).
Habe mantis per hg geladen und die Vendor ID angepasst (nach der Anleitung: http://linuxtv.org/wiki/index.…aTec_Cinergy_S2_PCI_HD_CI). Beim ausführen von scan bekomme ich aber gleich einen Fehler:Coderoot@xxx:/usr/src/scan# ./scan dvb-s/Astra-19.2E scanning dvb-s/Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12551500 V 22000000 22000000 ioctl DVBFE_GET_INFO failed: Invalid argument ERROR: initial tuning failed dumping lists (0 services) Done.
Außerdem lässt sich vdr (1.7.0) nicht kompilieren:
Code
Alles anzeigenroot@xxx:/usr/src/VDR# make In Datei, eingefügt von audio.c:12: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! In Datei, eingefügt von dvbdevice.c:10: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! In Datei, eingefügt von dvbosd.c:15: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! In Datei, eingefügt von eitscan.c:13: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! In Datei, eingefügt von vdr.c:45: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! make: *** Datei ».dependencies« wird gelöscht g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -D_GNU_SOURCE -DVIDEODIR=\"/video\" -DCONFDIR=\"/video\" -DPLUGINDIR=\"./PLUGINS/lib\" -DLOCDIR=\"./locale\" -I/usr/include/freetype2 audio.c In Datei, eingefügt von audio.c:12: dvbdevice.h:19:2: Fehler: #error VDR requires Linux DVB driver API version 3.3! In file included from audio.c:12: dvbdevice.h:38: Fehler: »dvbfe_delsys« bezeichnet keinen Typ make: *** [audio.o] Fehler 1
Brauche ich hier noch einen patch?
Danke für jede Hilfe
-
denke der h264 patch fehlt noch.
oder ein patch für die multiproto.
versuch mal x-vdr der patcht alles von selbst und installiert alles -
-
Danke, mit x-vdr hab ich's hinbekommen (musste aber xine (lib+ui) noch selbst kompilieren.
Jetzt hab ich allerdings das Problem, dass xine zwar SD-Sender ordentlich abspielt, HD-Sender werden allerdings nur ein paar Sekunden lang abgespielt bevor xine abstürzt (aber immer unterschiedlich lange, mal auch nur eine halbe Sekunde). Die Konsole gibt folgendes aus:Code
Alles anzeigen... [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]non existing PPS referenced [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]non existing PPS referenced [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]non existing PPS referenced [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]non existing PPS referenced [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]non existing PPS referenced [h264 @ 0x7fa625d9e100]decode_slice_header error [h264 @ 0x7fa625d9e100]left block unavailable for requested intra mode at 0 43 [h264 @ 0x7fa625d9e100]error while decoding MB 0 43, bytestream (14627) [h264 @ 0x7fa625d9e100]concealing 169 DC, 169 AC, 169 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]illegal short term buffer state detected [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]PAFF interlacing is not implemented [h264 @ 0x7fa625d9e100]illegal short term buffer state detected [h264 @ 0x7fa625d9e100]concealing 4080 DC, 4080 AC, 4080 MV errors xiTK received SIGSEGV signal, RIP. Aborted
/var/log/syslog:
Code
Alles anzeigenun 6 09:30:22 lucky vdr: [6010] TS continuity error (3) Jun 6 09:30:22 lucky vdr: [6010] TS continuity error (6) Jun 6 09:30:23 lucky vdr: [6010] TS continuity error (5) Jun 6 09:30:23 lucky vdr: [6010] TS continuity error (10) Jun 6 09:30:30 lucky vdr: [6010] TS continuity error (9) Jun 6 09:30:30 lucky vdr: [6010] TS continuity error (10) Jun 6 09:30:30 lucky vdr: [6010] TS continuity error (7) Jun 6 09:30:30 lucky vdr: [6010] TS continuity error (14) Jun 6 09:30:30 lucky vdr: [6010] PES packet shortened to 518 bytes (expected: 1806 bytes) Jun 6 09:30:30 lucky vdr: [6010] 9 cRepacker messages suppressed Jun 6 09:30:30 lucky vdr: [6010] cDolbyRepacker: skipped 500 bytes while syncing on next AC3 frame Jun 6 09:30:33 lucky vdr: [6010] TS continuity error (3) Jun 6 09:30:33 lucky vdr: [6010] PES packet shortened to 702 bytes (expected: 1806 bytes) Jun 6 09:30:46 lucky vdr: [6010] TS continuity error (15) Jun 6 09:30:46 lucky vdr: [6010] TS continuity error (15) Jun 6 09:30:46 lucky vdr: [6010] TS continuity error (10) Jun 6 09:30:46 lucky vdr: [6010] TS continuity error (0) Jun 6 09:30:47 lucky vdr: [6010] TS continuity error (11) Jun 6 09:30:47 lucky vdr: [6010] TS continuity error (8) Jun 6 09:30:48 lucky vdr: [6010] TS continuity error (7) Jun 6 09:30:48 lucky vdr: [6010] TS continuity error (8)
Woran liegt das? System (C2D 2,1 GHz, 2GB, Ubuntu Hardy) zu langsam? Sat-Signal zu schlecht?
Danke
-
Hallo zusammen!
Bin neu hier und dazu noch absoluter Linux Anfänger, aber ich hoffe einer von euch kann mit trozdem helfen
wenn ich versuche die treiber für meine Skystar HD2 zu installieren indem ich:
eingebe bekomme ich immer folgende Fehlerausgabe:Code
Alles anzeigenvdr:/usr/local/src/mantis # make && make install make -C /usr/local/src/mantis/v4l make[1]: Entering directory `/usr/local/src/mantis/v4l' No version yet, using 2.6.25.4-8-default make[1]: Leaving directory `/usr/local/src/mantis/v4l' make[1]: Entering directory `/usr/local/src/mantis/v4l' scripts/make_makefile.pl Updating/Creating .config Preparing to compile for kernel version 2.6.25 VIDEO_PLANB: Requires at least kernel 2.6.99 Created default (all yes) .config file ./scripts/make_myconfig.pl make[1]: Leaving directory `/usr/local/src/mantis/v4l' make[1]: Entering directory `/usr/local/src/mantis/v4l' perl scripts/make_config_compat.pl /lib/modules/2.6.25.4-8-default/source ./.myconfig ./config-compat.h creating symbolic links... ln -sf . oss Kernel build directory is /lib/modules/2.6.25.4-8-default/build make -C /lib/modules/2.6.25.4-8-default/build SUBDIRS=/usr/local/src/mantis/v4l modules make[2]: Entering directory `/usr/src/linux-2.6.25.4-8-obj/x86_64/default' make -C /usr/src/linux-2.6.25.4-8 O=/usr/src/linux-2.6.25.4-8-obj/x86_64/default/. modules CC [M] /usr/local/src/mantis/v4l/flexcop-pci.o CC [M] /usr/local/src/mantis/v4l/flexcop-usb.o CC [M] /usr/local/src/mantis/v4l/flexcop.o CC [M] /usr/local/src/mantis/v4l/flexcop-fe-tuner.o CC [M] /usr/local/src/mantis/v4l/flexcop-i2c.o CC [M] /usr/local/src/mantis/v4l/flexcop-sram.o CC [M] /usr/local/src/mantis/v4l/flexcop-eeprom.o CC [M] /usr/local/src/mantis/v4l/flexcop-misc.o CC [M] /usr/local/src/mantis/v4l/flexcop-hw-filter.o CC [M] /usr/local/src/mantis/v4l/flexcop-dma.o CC [M] /usr/local/src/mantis/v4l/bttv-driver.o CC [M] /usr/local/src/mantis/v4l/bttv-cards.o CC [M] /usr/local/src/mantis/v4l/bttv-if.o CC [M] /usr/local/src/mantis/v4l/bttv-risc.o CC [M] /usr/local/src/mantis/v4l/bttv-vbi.o CC [M] /usr/local/src/mantis/v4l/bttv-i2c.o CC [M] /usr/local/src/mantis/v4l/bttv-gpio.o CC [M] /usr/local/src/mantis/v4l/bttv-input.o CC [M] /usr/local/src/mantis/v4l/bttv-audio-hook.o CC [M] /usr/local/src/mantis/v4l/cpia2_v4l.o CC [M] /usr/local/src/mantis/v4l/cpia2_usb.o CC [M] /usr/local/src/mantis/v4l/cpia2_core.o CC [M] /usr/local/src/mantis/v4l/cx23885-cards.o CC [M] /usr/local/src/mantis/v4l/cx23885-video.o CC [M] /usr/local/src/mantis/v4l/cx23885-vbi.o CC [M] /usr/local/src/mantis/v4l/cx23885-core.o CC [M] /usr/local/src/mantis/v4l/cx23885-i2c.o CC [M] /usr/local/src/mantis/v4l/cx23885-dvb.o CC [M] /usr/local/src/mantis/v4l/cx25840-core.o /usr/local/src/mantis/v4l/cx25840-core.c:71: error: conflicting type qualifiers for 'addr_data' /usr/local/src/mantis/v4l/../linux/include/media/v4l2-i2c-drv-legacy.h:41: error: previous declaration of 'addr_data' was here make[5]: *** [/usr/local/src/mantis/v4l/cx25840-core.o] Error 1 make[4]: *** [_module_/usr/local/src/mantis/v4l] Error 2 make[3]: *** [sub-make] Error 2 make[2]: *** [all] Error 2 make[2]: Leaving directory `/usr/src/linux-2.6.25.4-8-obj/x86_64/default' make[1]: *** [default] Error 2 make[1]: Leaving directory `/usr/local/src/mantis/v4l' make: *** [all] Error 2
kennt jemand das Problem und kann mir evtl helfen?grüße
downset -
liegt am 2.6.25 kernel aber da gibts abhilfe.
mit 2.6.24 funktionierts proplemlos -
Zitat
Originally posted by Hans77
und woher bekomme ich ein scan2Das werde ich auch gern wissen...
-
Hallo,
download mal die hg repos von dvb-apps: hg clone http://linuxtv.org/hg/dvb-apps
Unter directory test befindet sich scan2.
Benutz z.b.sp die channels.conf von VDR 1.7.0.Ich bin nicht sicher ob das mit dieser karte funktioniert, ich bekam ein lock aber ohne signalstärke...
m fr gr
Carel
edit: Sorry das war szap2 und nicht scan2, entschuldigung...
scan2 can ich aucg nicht finden, gibt's einfach nicht ! -
What would be the best buy at the moment? The SkyStar HD2 or the Cinergy S2 HD? Is the support for the first card better at the moment?
-
Zitat
Originally posted by eborn
What would be the best buy at the moment? The SkyStar HD2 or the Cinergy S2 HD? Is the support for the first card better at the moment?I'm guessing neither...
If there is a way to get the SS HD2 (e.g. Twinhan vp1041 / Azureware AD-SP 400),- workng under Linux (i.e. MythTV or VDR), I havn't fount it yet...No strike that, the stock Sortware under Windows works 100%, and theres your problem, I'M tryin to run a**holes and elbows away from that. ~If only MCE-2005/Vista-MCE had any actuall support for DVB-x~
I gather that ~older~ SS HD (iirc, Technotrend S-3200), works fine with the Multiproto Drivers though. Alas I can not comment on it as I only have the SS HD2.
In anycase I susspect that it's going to be a long time before these "Cards" become 100%, as Linux does NOT officialyy support the DVB-S2 standard... yet...Anyone like to take a stab at when this hurdle will be jumped?
That said I'd just be happy to use the Card under Linux for nomal DVB-S. Then again I have the Nexus-S for that...
-
Hi habe auch diese karte Terratec Cinergy S2 HD. Und genauso gemacht wie Haus77.
Karte wurde auch erkannt nur wenn ich dann denn scan machen will kommt immer der Fehler:
DVBFE_GET_INFO failed: Opereration not suppordetworan könnte das liegen.
-
So far as I know (under U(myth)buntu), 7.10/8.04:
Codecd /usr/src/ hg clone http://just.de/hg/mantis/ cd mantis make && make install modprobe mantis † init 6
† You'll like get some Error Message just reboot the System and it WILL WORK!
Next:
Code
Alles anzeigencd /usr/src/ hg clone http://linuxtv.org/hg/dvb-apps † cd dvb-apps make cd util rm -R scan †† wget http://jusst.de/manu/scan.tar.bz2 tar -xjvf scan.tar.bz2 cd scan nano Makefile
Under the line
add
Then:
Codewget http://linuxtv.org/pipermail/linux-dvb/attachments/20080406/a365d65c/attachment.txt patch -p1 < attachment.txt make clean make
† dvb-apps = DVB-API 3.3
†† Or fell free to rename it if you likeNow you can use:
(i.e. ./scan -a 1 -s 0 /usr/src/dvb-apps/util/dvb-s/Astra-19.2), for use on Adapter 1 DiSEqC position 1 (i.e. A. 1 being B), given the number of "Adapters" your System might have you'll likely have to change this. If you don't use a Monoblock or a DiSEqC Switch you can forgo the -s N swithch aswell.
Now that you have a channels.conf File @ ~/.szap/channels.conf we can try to zap some of 'em.
Code
Alles anzeigencd /usr/src/dvb-apps/test ./szap -a N -r -p -t N "<CHANNELNAME>" -a N = Adapter Number -t N = 0 DVB-S, 1 DSS, 2 DVB-S2 (i.e. ./szap -a 1 -r -p t 2 "ASTRA HD+") to szap the DVB-S/S2 ASTRA HD+ Channel on 19.2E) Test with Mplayer: [CODE]mplayer /dev/dvb/adapterN/dvr0
and you should get some light, at least I've had "light" this way, sadly I haven't been able to get Mantis / Multiproto to work under MythTV or VDR for that matter -
Zitat
Original von 5piritusmit vdr-1.7.0 Funktioniert die karte ansatzweise.
Was fehlt der Karte denn aktuell noch zur TT S3200?
Ich bräuchte nämlich eigentlich eine, die in LowProfile daherkommt...
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!