vdradmin nicht mehr erreichbar

Hallo,

ich kann man VDR (Mahlzeit 3.2) nicht mehr per http erreichen.

Im log konnte ich auch nichts dazu finden:

Mar 8 16:43:54 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Mar 8 16:43:54 linvdr user.info kernel: via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
Mar 8 16:43:54 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Mar 8 16:43:54 linvdr user.info kernel: b8, IRQ 11.
Mar 8 16:43:54 linvdr user.info kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Mar 8 16:43:54 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Mar 8 16:43:55 linvdr auth.info sshd[1256]: Server listening on 0.0.0.0 port 22.
Mar 8 16:43:56 linvdr daemon.info init: ^MStarting pid 1271, console /dev/tty1: '/sbin/getty'
Mar 8 16:43:56 linvdr daemon.info init: ^MStarting pid 1272, console /dev/tty2: '/sbin/getty'
Mar 8 16:43:56 linvdr daemon.info init: ^MStarting pid 1278, console /dev/tty3: '/sbin/getty'
Mar 8 16:43:56 linvdr daemon.info init: ^MStarting pid 1279, console /dev/tty4: '/sbin/getty'
Mar 8 16:43:56 linvdr user.info kernel: Linux video capture interface: v2.00
Mar 8 16:43:57 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Mar 8 16:43:58 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Mar 8 16:43:58 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Mar 8 16:43:58 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Mar 8 16:43:58 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Mar 8 16:43:58 linvdr user.info kernel: flexcop-pci: will use the HW PID filter.
Mar 8 16:43:58 linvdr user.info kernel: flexcop-pci: card revision 2
Mar 8 16:43:58 linvdr user.info kernel: GSI 10 (level, low) -> IRQ 10
Mar 8 16:43:58 linvdr user.warn kernel: DVB: registering new adapter (FlexCop Digital TV device).
Mar 8 16:43:58 linvdr user.info kernel: b2c2-flexcop: MAC address = 00:d0:d7:14:44:5b
Mar 8 16:43:58 linvdr user.info kernel: b2c2-flexcop: found the stv0299 at i2c address: 0x68
Mar 8 16:43:58 linvdr user.warn kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 8 16:43:58 linvdr user.info kernel: b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Mar 8 16:43:58 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Mar 8 16:43:58 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Mar 8 16:43:59 linvdr user.info kernel: lirc_serial: auto-detected active high receiver
Mar 8 16:43:59 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Mar 8 16:44:00 linvdr user.info vdr: [1383] VDR version 1.4.4-2-Toxic-Ed. started
Mar 8 16:44:00 linvdr user.info vdr: [1383] Bigpatch 17.09.2006 is active!
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/setup.conf
Mar 8 16:44:00 linvdr user.err vdr: [1383] ERROR: unknown config parameter: RecordDolbyDigital = 1
Mar 8 16:44:00 linvdr user.err vdr: [1383] ERROR: unknown config parameter: ShowProgressBar = 0
Mar 8 16:44:00 linvdr user.err vdr: [1383] ERROR: unknown config parameter: SortTimers = 1
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/sources.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/diseqc.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/channels.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/timers.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/commands.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/reccmds.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/svdrphosts.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/remote.conf
Mar 8 16:44:00 linvdr user.info vdr: [1383] loading /etc/vdr/keymacros.conf
Mar 8 16:44:00 linvdr user.debug vdr: [1387] video directory scanner thread started (pid=1387, tid=1387)
Mar 8 16:44:00 linvdr user.debug vdr: [1388] video directory scanner thread started (pid=1388, tid=1388)
Mar 8 16:44:00 linvdr user.debug vdr: [1383] reading EPG data from /video0/epg.data
Mar 8 16:44:00 linvdr user.debug vdr: [1388] video directory scanner thread ended (pid=1388, tid=1388)
Mar 8 16:44:01 linvdr user.debug vdr: [1383] probing /dev/dvb/adapter0/frontend0
Mar 8 16:44:01 linvdr user.debug vdr: [1390] tuner on device 1 thread started (pid=1390, tid=1390)
Mar 8 16:44:01 linvdr user.debug vdr: [1391] section handler thread started (pid=1391, tid=1391)
Mar 8 16:44:01 linvdr user.debug vdr: [1383] probing /dev/dvb/adapter1/frontend0
Mar 8 16:44:01 linvdr user.info vdr: [1383] found 1 video device
Mar 8 16:44:01 linvdr user.info vdr: [1383] setting primary device to 1
Mar 8 16:44:01 linvdr user.info vdr: [1383] device 1 has no MPEG decoder
Mar 8 16:44:01 linvdr user.info vdr: [1383] SVDRP listening on port 2001
Mar 8 16:44:01 linvdr user.info vdr: [1383] setting current skin to "classic"
Mar 8 16:44:01 linvdr user.info vdr: [1383] loading /etc/vdr/themes/classic-default.theme
Mar 8 16:44:01 linvdr user.debug vdr: [1392] LIRC remote control thread started (pid=1392, tid=1392)
Mar 8 16:44:01 linvdr user.debug vdr: [1393] KBD remote control thread started (pid=1393, tid=1393)
Mar 8 16:44:01 linvdr user.debug vdr: [1383] remote control LIRC - keys known
Mar 8 16:44:01 linvdr user.debug vdr: [1383] remote control KBD - keys known
Mar 8 16:44:01 linvdr user.info vdr: [1383] switching to channel 1
Mar 8 16:44:01 linvdr user.debug vdr: [1383] setting watchdog timer to 900 seconds
Mar 8 16:44:01 linvdr user.err vdr: [1383] ERROR: no OSD provider available - using dummy OSD!
Mar 8 16:44:01 linvdr user.debug vdr: [1387] video directory scanner thread ended (pid=1387, tid=1387)
Mar 8 16:44:01 linvdr user.info vdr: [1383] timer 1 (1 2010-2155 'Tatort: Hart an der Grenze') set to event Son 09.03.2008 20:15-21:45 (VPS: 09.03 20:15) 'Tatort: Hart an der Grenze'
Mar 8 16:44:02 linvdr user.info vdr: [1391] channel 1 (Das Erste) event Sam 08.03.2008 16:30-17:00 (VPS: 08.03 16:30) 'Europamagazin' status 4
Mar 8 16:44:11 linvdr user.debug vdr: [1383] max. latency time 1 seconds
Mar 8 16:44:28 linvdr cron.notice crond[1407]: crond 2.3.2 dillon, started, log level 8
Mar 8 16:44:30 linvdr user.info vdr: [1383] connect from 127.0.0.1, port 2086 - accepted
Mar 8 16:44:34 linvdr user.debug vdr: [1391] changing pids of channel 49 from 701+701:702:204 to 901+901:902:204
Mar 8 16:44:35 linvdr user.debug vdr: [1383] max. latency time 5 seconds
Mar 8 16:44:35 linvdr user.info vdr: [1383] closing SVDRP connection
Mar 8 16:45:01 linvdr cron.notice crond[1407]: USER root pid 1410 cmd convert.pl -q -s
Mar 8 16:45:34 linvdr user.debug vdr: [1391] changing pids of channel 49 from 901+901:902:204 to 701+701:702:204
Mar 8 16:46:33 linvdr user.debug vdr: [1391] changing pids of channel 49 from 701+701:702:204 to 901+901:902:204
Mar 8 16:47:34 linvdr user.debug vdr: [1391] changing pids of channel 49 from 901+901:902:204 to 701+701:702:204
Mar 8 16:48:34 linvdr user.debug vdr: [1391] changing pids of channel 49 from 701+701:702:204 to 901+901:902:204
Mar 8 16:49:34 linvdr user.debug vdr: [1391] changing pids of channel 49 from 901+901:902:204 to 701+701:702:204
Mar 8 16:49:49 linvdr auth.info sshd[1411]: Could not reverse map address 192.168.0.3.
Mar 8 16:50:01 linvdr cron.notice crond[1407]: USER root pid 1412 cmd convert.pl -q -s
Mar 8 16:50:11 linvdr auth.info sshd[1411]: Accepted password for root from 192.168.0.3 port 4305 ssh2
Mar 8 16:50:11 linvdr auth.info sshd[1411]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Mar 8 16:50:11 linvdr auth.info PAM_unix[1411]: (ssh) session opened for user root by (uid=0)
Mar 8 16:50:11 linvdr auth.err PAM-env[1411]: Unable to open config file: No such file or directory
Mar 8 16:50:11 linvdr auth.err PAM-env[1413]: Unable to open config file: No such file or directory
Mar 8 16:50:35 linvdr user.debug vdr: [1391] changing pids of channel 49 from 701+701:702:204 to 901+901:902:204
Mar 8 16:51:33 linvdr user.debug vdr: [1391] changing pids of channel 49 from 901+901:902:204 to 701+701:702:204
linvdr:~#

vdradmin.pl läuft auch.

Woran kann das liegen?

hab mir mal die vdradmind.conf angeschaut, und hab sie mit nem alten backup verglichen.
vdradmin ist doch noch erreichbar, allerings auf Port 8001 und in Englisch.
Irgendwie scheint sich die vdradmind.conf selbst geändert zu haben.

Wenn ich meine alte vdradmind.conf aus meinem tar-archiv nehme, wird sie beim Neustart wieder überschrieben.

Hat einer ne Ahnung, was da faul ist?

Hier meine vdradmind.conf

AT_DESC = 0
AT_FUNC = 0
AT_LIFETIME = 99
AT_MARGIN_BEGIN = 10
AT_MARGIN_END = 10
AT_OFFER = 1
AT_PRIORITY = 99
AT_SENDMAIL = 0
AT_SORTBY = pattern
AT_TIMEOUT = 120
AT_TOOLTIP = 1
AUTO_SAVE_CONFIG = 1
CACHE_LASTUPDATE = 1204995263
CACHE_REC_LASTUPDATE = 0
CACHE_REC_TIMEOUT = 60
CACHE_TIMEOUT = 60
CHANNELS_WANTED =
CHANNELS_WANTED_AUTOTIMER =
CHANNELS_WANTED_PRG =
CHANNELS_WANTED_PRG2 =
CHANNELS_WANTED_SUMMARY =
CHANNELS_WANTED_TIMELINE =
CHANNELS_WANTED_WATCHTV =
CMD_LINES = 20
EPGIMAGES = /video/epgimages
EPG_DIRECT = 0
EPG_FILENAME = /video/epg.data
EPG_PRUNE = 0
ES_DESC = 0
ES_SORTBY = pattern
GUEST_ACCOUNT = 0
LANG =
LOCAL_NET = 0.0.0.0/32
LOGFILE = vdradmind.log
LOGGING = 0
LOGINPAGE = 0
LOGLEVEL = 81
MAIL_AUTH_PASS =
MAIL_AUTH_USER =
MAIL_FROM = autotimer@
MAIL_SERVER = your.email.server
MAIL_TO = your@email.address
MOD_GZIP = 0
NO_EVENTID = 0
NO_EVENTID_ON =
PASSWORD = linvdr
PASSWORD_GUEST = guest
PROG_SUMMARY_COLS = 3
PS_VIEW = ext
RECORDINGS = 1
REC_DESC = 0
REC_EXT = m3u
REC_MIMETYPE = video/x-mpegurl
REC_SORTBY = name
SERVERHOST = 0.0.0.0
SERVERPORT = 8001
SKIN = default
ST_FUNC = 1
ST_LIVE_ON = 1
ST_REC_ON = 0
ST_STREAMDEV_PORT = 3000
ST_URL =
ST_VIDEODIR =
TEMPLATE = default
TIMES = 18:00, 20:00, 21:00, 22:00
TL_TOOLTIP = 1
TM_DESC = 0
TM_LIFETIME = 99
TM_MARGIN_BEGIN = 10
TM_MARGIN_END = 10
TM_PRIORITY = 99
TM_SORTBY = day
TM_TT_LIST = 1
TM_TT_TIMELINE = 1
TV_EXT = m3u
TV_INTERVAL = 5
TV_MIMETYPE = video/x-mpegurl
TV_SIZE = half
USERNAME = linvdr
USERNAME_GUEST = guest
VDRCONFDIR = /video
VDRVFAT = 1
VDR_HOST = localhost
VDR_PORT = 2001
VIDEODIR = /video
ZEITRAHMEN = 1