Nexus-s + Nova-S-Plus + Aufnehmen = "emergency exit!"

m.list · 29. Dezember 2007

Hallo,

hab ein Problem mit der gleichzeitiger nutzung von einer Nexus-s und einer Nova-S-Plus Karte.

Einzeln funktionieren die Karten einwandfrei aber wenn beide eingebaut sind und ich versuche was aufzunehmen dann krachts. VDR steigt mit ein "emergency exit!" aus, startet sich neu und steigt wieder aus, usw bis der aufnahme Timer abgelaufen ist.

Ubuntu 7.10
VDR 1.4.7
Nexus-S rev2.1
Nova-S-Plus DVB-S

Gruss
CdS

syslog

Code

Dec 29 01:05:19 keller vdr: [5126] recording thread started (pid=4656, tid=5126)
Dec 29 01:05:19 keller vdr: [5127] receiver on device 1 thread started (pid=4656, tid=5127)
Dec 29 01:05:19 keller kernel: [  673.386785] cx88[0]: irq mpeg  [0x100000] ts_err?*
Dec 29 01:05:19 keller kernel: [  673.386808] cx88[0]/2-mpeg: general errors: 0x00100000
Dec 29 01:05:19 keller vdr: [5128] TS buffer on device 1 thread started (pid=4656, tid=5128)
Dec 29 01:05:19 keller kernel: [  673.881101] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:20 keller kernel: [  674.380602] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:20 keller vdr: [4656] connect from 127.0.0.1, port 35626 - accepted
Dec 29 01:05:20 keller kernel: [  674.880106] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:21 keller kernel: [  675.379600] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:21 keller vdr: [4656] closing SVDRP connection
Dec 29 01:05:21 keller kernel: [  675.879070] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:22 keller kernel: [  676.378561] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:22 keller kernel: [  676.878054] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:23 keller kernel: [  677.377545] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:23 keller kernel: [  677.877042] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:24 keller kernel: [  678.376528] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:24 keller kernel: [  678.876021] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:25 keller kernel: [  679.375513] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:25 keller kernel: [  679.875005] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:26 keller kernel: [  680.374497] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:26 keller kernel: [  680.873990] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:27 keller kernel: [  681.373480] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:27 keller kernel: [  681.872973] cx88[0]/2-mpeg: cx8802_timeout
<snip>
<snip>
<snip>
Dec 29 01:05:50 keller vdr: [5125] ERROR: video data stream broken
Dec 29 01:05:50 keller vdr: [5125] initiating emergency exit
Dec 29 01:05:50 keller vdr: [4832] changing pids of channel 45 from 701+701:702:204 to 901+901:902:204
Dec 29 01:05:50 keller kernel: [  704.350124] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:50 keller vdr: [4656] emergency exit requested - shutting down
Dec 29 01:05:50 keller vdr: [5126] recording thread ended (pid=4656, tid=5126)
Dec 29 01:05:50 keller kernel: [  704.849611] cx88[0]/2-mpeg: cx8802_timeout
Dec 29 01:05:50 keller vdr: [5128] TS buffer on device 1 thread ended (pid=4656, tid=5128)
Dec 29 01:05:50 keller vdr: [5127] buffer stats: 0 (0%) used
Dec 29 01:05:50 keller vdr: [5127] receiver on device 1 thread ended (pid=4656, tid=5127)
Dec 29 01:05:50 keller vdr: [5125] file writer thread ended (pid=4656, tid=5125)
Dec 29 01:05:50 keller vdr: [4656] buffer stats: 0 (0%) used
Dec 29 01:05:50 keller vdr: [4656] timer 2 (1 0105-0110 'Das Erste') stop
Dec 29 01:05:50 keller vdr: [4656] executing '/usr/lib/vdr/vdr-recordingaction after "/var/lib/video.00/Das_Erste/2007-12-29.01.05.01.01.rec"'
Dec 29 01:05:50 keller recordingaction: executing /usr/share/vdr/recording-hooks/R90.custom after recording /var/lib/video.00/Das_Erste/2007-12-29.01.05.01.01.rec as shell script
Dec 29 01:05:50 keller vdr: [4656] saved setup to /var/lib/vdr/setup.conf
Dec 29 01:05:50 keller lircd-0.8.2[4788]: removed client
Dec 29 01:05:51 keller vdr: [4739] tuner on device 1 thread ended (pid=4656, tid=4739)
Dec 29 01:05:52 keller vdr: [4740] section handler thread ended (pid=4656, tid=4740)
Dec 29 01:05:52 keller vdr: [4831] tuner on device 2 thread ended (pid=4656, tid=4831)
Dec 29 01:05:52 keller vdr: [4832] section handler thread ended (pid=4656, tid=4832)
Dec 29 01:05:53 keller vdr: [4656] =====================
Dec 29 01:05:53 keller vdr: [4656] EPG bugfix statistics
Dec 29 01:05:53 keller vdr: [4656] =====================
Dec 29 01:05:53 keller vdr: [4656] IF SOMEBODY WHO IS IN CHARGE OF THE EPG DATA FOR ONE OF THE LISTED
Dec 29 01:05:53 keller vdr: [4656] CHANNELS READS THIS: PLEASE TAKE A LOOK AT THE FUNCTION cEvent::FixEpgBugs()
Dec 29 01:05:53 keller vdr: [4656] IN VDR/epg.c TO LEARN WHAT'S WRONG WITH YOUR DATA, AND FIX IT!
Dec 29 01:05:53 keller vdr: [4656] =====================
Dec 29 01:05:53 keller vdr: [4656] Fix^IHits^IChannels
Dec 29 01:05:53 keller vdr: [4656] 3^I18^IDASDING, SWR Fernsehen BW, KiKa, DW 1, Dok&Deb
Dec 29 01:05:53 keller vdr: [4656] 4^I1^IEinsExtra
Dec 29 01:05:53 keller vdr: [4656] 6^I608^ISWR Fernsehen BW, WDR K<F6>ln, Bayerisches FS, BR-alpha, WDR Event, arte, Das Erste, ...
Dec 29 01:05:53 keller vdr: [4656] 7^I38^IRadio Bremen TV, BR-alpha, MDR SACHSEN+, MDR S-ANHALT+, NDR FS SH, NDR FS HH, ...
Dec 29 01:05:53 keller vdr: [4656] =====================
Dec 29 01:05:53 keller vdr: [4656] max. latency time 2 seconds
Dec 29 01:05:53 keller vdr: [4656] exiting
Dec 29 01:05:53 keller vdr-kbd: [4656] emergency exit!
Dec 29 01:05:53 keller logger: restarting VDR
Dec 29 01:06:03 keller kernel: [  717.516321] saa7146: unregister extension 'dvb'.
Dec 29 01:06:03 keller kernel: [  717.525385] ACPI: PCI interrupt for device 0000:01:06.0 disabled
Dec 29 01:06:03 keller kernel: [  717.613038] saa7146: register extension 'dvb'.
Dec 29 01:06:03 keller kernel: [  717.613118] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 20 (level, low) -> IRQ 21
Dec 29 01:06:03 keller kernel: [  717.613173] saa7146: found saa7146 @ mem f8a5c000 (revision 1, irq 21) (0x13c2,0x0003).
Dec 29 01:06:03 keller kernel: [  717.653781] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Dec 29 01:06:03 keller kernel: [  717.660595] adapter has MAC addr = 00:d0:5c:21:d9:95
Dec 29 01:06:03 keller kernel: [  717.878937] dvb-ttpci: gpioirq unknown type=0 len=0
Dec 29 01:06:03 keller kernel: [  717.916460] dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
Dec 29 01:06:03 keller kernel: [  717.916468] dvb-ttpci: firmware @ card 1 supports CI link layer interface
Dec 29 01:06:03 keller kernel: [  717.996489] dvb-ttpci: Crystal audio DAC @ card 1 detected
Dec 29 01:06:03 keller kernel: [  717.997742] saa7146_vv: saa7146 (0): registered device video1 [v4l2]
Dec 29 01:06:03 keller kernel: [  717.997769] saa7146_vv: saa7146 (0): registered device vbi1 [v4l2]
Dec 29 01:06:04 keller kernel: [  718.316186] DVB: registering frontend 1 (ST STV0299 DVB-S)...
Dec 29 01:06:04 keller kernel: [  718.316384] input: DVB on-card IR receiver as /class/input/input6
Dec 29 01:06:04 keller kernel: [  718.316436] dvb-ttpci: found av7110-0.
Dec 29 01:06:04 keller vdr: [5212] VDR version 1.4.7 started
Dec 29 01:06:04 keller vdr: [5212] switched to user 'vdr'
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/setup.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/sources.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/diseqc.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/channels.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/timers.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/commands.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/reccmds.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/svdrphosts.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/remote.conf
Dec 29 01:06:04 keller vdr: [5212] loading /var/lib/vdr/keymacros.conf
Dec 29 01:06:04 keller vdr: [5212] reading EPG data from /var/cache/vdr/epg.data
Dec 29 01:06:04 keller vdr: [5213] video directory scanner thread started (pid=5212, tid=5213)
Dec 29 01:06:04 keller vdr: [5213] video directory scanner thread ended (pid=5212, tid=5213)
Dec 29 01:06:04 keller vdr: [5214] video directory scanner thread started (pid=5212, tid=5214)
Dec 29 01:06:04 keller vdr: [5214] video directory scanner thread ended (pid=5212, tid=5214)
Dec 29 01:06:05 keller vdr: [5212] probing /dev/dvb/adapter0/frontend0
Dec 29 01:06:05 keller vdr: [5212] probing /dev/dvb/adapter1/frontend0
Dec 29 01:06:05 keller vdr: [5216] tuner on device 1 thread started (pid=5212, tid=5216)
Dec 29 01:06:05 keller vdr: [5217] section handler thread started (pid=5212, tid=5217)
Dec 29 01:06:07 keller vdr: [5212] found 2 video devices
Dec 29 01:06:07 keller vdr: [5212] setting primary device to 2
Dec 29 01:06:07 keller vdr: [5219] tuner on device 2 thread started (pid=5212, tid=5219)
Dec 29 01:06:07 keller vdr: [5220] section handler thread started (pid=5212, tid=5220)
Dec 29 01:06:07 keller vdr: [5212] SVDRP listening on port 2001
Dec 29 01:06:07 keller vdr: [5212] setting current skin to "sttng"
Dec 29 01:06:07 keller vdr: [5212] loading /var/lib/vdr/themes/sttng-default.theme
Dec 29 01:06:07 keller lircd-0.8.2[4788]: accepted new client on /dev/lircd
Dec 29 01:06:07 keller vdr: [5212] remote control LIRC - keys known
Dec 29 01:06:07 keller vdr: [5212] switching to channel 1
Dec 29 01:06:07 keller vdr: [5221] LIRC remote control thread started (pid=5212, tid=5221)
Dec 29 01:06:07 keller vdr: [5212] setting watchdog timer to 60 seconds

Alles anzeigen

sudo lspci -vv

Code

01:04.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
        Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


01:04.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 9202
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


01:04.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 9202
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


01:04.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 9202
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


01:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at f9001000 (32-bit, non-prefetchable) [size=512]

Alles anzeigen

SHF · 30. Dezember 2007

Sieht mir nach einem Interrupt-Problem aus, versuch es mal in anderen Slots.

m.list · 30. Dezember 2007

Hi,

Danke fuer den hinweis!

hab schon verschiedene Slot Kombinationen probiert ohne erfolg.

Wenn ich aber die ausgabe von lspci richtig versteh dann ist die Nova auf IRQ 20 und die Nexus auf IRQ 21 oder?

Gruss
CdS

oe6jwf · 30. Dezember 2007

probier neue treiber.. hat bei mir wunder gewirkt.. ganz sauber rennts trotzdem nicht..

73

SHF · 31. Dezember 2007

Zitat

Original von m.list
Wenn ich aber die ausgabe von lspci richtig versteh dann ist die Nova auf IRQ 20 und die Nexus auf IRQ 21 oder?

Ja, das schon, falls die Karten an der selben Int-Leitung hängen soll es aber wohl manchmal trotzdem Probleme geben.

Da die Nova-S-Plus relativ neu ist könnten neue Treiber auch einiges bringen.

Die Fehlermeldung "cx8802_timeout" hab ich schon gesehen, vielleicht bringt die Suche ja was zu Tage.

Kamikaze · 31. Dezember 2007

Such auch mal nach der Meldung "Video Data Stream Broken". Wurde glaube ich auch schon mit vdsb abgekürzt. Bei mir half damals glaube ich, dass cih den epg-Scan abgeschaltet hab.

m.list · 2. Januar 2008

Das der Treiber daran schuld ist klaub ich weniger da die Karte ja lauft wenn sie alleine eingebaut ist.

Ich probier mal mit den slots to spielen - 2 Karten 6 Slots ergibt 30 kombinationen

nzjunky · 4. Januar 2008

Hallo

Ich kämpfer gerade mit der gleichen Kombination: Nova-S Plus und eine Nova S.

Es sieht bei mir so aus, als ob die Nova-S Plus das diseqc nicht mehr hinbekommt, während auf der Nova S eine Aufnahme läuft. Ein Umschalten von Hotbird zu Astra klappt auf jedenfall nicht mehr. Das Problem liegt also in der Kombination der beiden Karten.

Ist eventuell die diseqc Ansteuerung der einten Karte nicht sauber von der Ansteuerung der anderen Karte im Treiber getrennt und beeinflussen sich daher, respektive blockieren sich bei einer Aufnahme gegenseitig?

Vielleicht hilft das ja weiter.

Gruss nzjunky

Infos zu den Karten und dem System:

video:~# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/K8V-X motherboard
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.5
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Capabilities: [68] Power Management version 2
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f1300000-f54fffff
Prefetchable memory behind bridge: c9200000-e91fffff
Capabilities: [80] Power Management version 2

00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Unknown device 0003:000f
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fdd00000 (32-bit, non-prefetchable) [size=2K]
I/O ports at c800 [size=128]
Capabilities: [50] Power Management version 2

00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fdc00000 (32-bit, non-prefetchable) [size=16K]
I/O ports at c400 [size=256]
Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data

00:0c.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

00:0c.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

00:0c.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

00:0c.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at fda00000 (32-bit, non-prefetchable) [size=512]

00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at e800 [size=8]
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at d800 [size=4]
I/O ports at d400 [size=16]
I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 32, IRQ 18
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at c000 [size=32]
Capabilities: [80] Power Management version 2

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at fd800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX])
Flags: medium devsel, IRQ 21
I/O ports at ec00 [size=256]
Capabilities: [c0] Power Management version 2

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
Flags: medium devsel, IRQ 21
I/O ports at 1000 [size=256]
Capabilities: [d0] Power Management version 2

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel

01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0131
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 17
Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f5400000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0

m.list · 4. Januar 2008

Zitat

Originally posted by m.list

Ich probier mal mit den slots to spielen - 2 Karten 6 Slots ergibt 30 kombinationen

Nach etliche versuche hab ich eine Kombination gefunden wos klappt - keine Absturze mehr

Also doch ein IRQ Problem.

Was mich aber wundert ist dass egal welchen Slot die Karten belegten die IRQs waren immer die selben 20 und 21.

Danke fuer die Tipps!

m.list · 4. Januar 2008

Zitat

Originally posted by nzjunky

Es sieht bei mir so aus, als ob die Nova-S Plus das diseqc nicht mehr hinbekommt, während auf der Nova S eine Aufnahme läuft. Ein Umschalten von Hotbird zu Astra klappt auf jedenfall nicht mehr. Das Problem liegt also in der Kombination der beiden Karten.

Ist eventuell die diseqc Ansteuerung der einten Karte nicht sauber von der Ansteuerung der anderen Karte im Treiber getrennt und beeinflussen sich daher, respektive blockieren sich bei einer Aufnahme gegenseitig?

Hab auch diseqc und bei mir klappts jetzt.

ahlermi · 20. August 2009

Hallo zusammen,

ich habe das Problem leider immer noch.

Mein Kollege hat exakt den selben Rechner nur als zweite Karte eine Nova-S.

Bei ihm scheint alles gut zu laufen.

Ich habe natürlich auch nur 2 PCI slots auf dem Board :-/

hat jemand noch einen Tip?

Danke & Gruß
Michael

lspci -vv

02:05.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx8800

02:05.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa

02:05.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802

02:05.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: dvb
Kernel modules: dvb-ttpci

SHF · 21. August 2009

Die Nova-S wird eine ganz andere Karte, mit Philips SAA7146 und nicht mit Conexant Chipsatz, sein.

hemig · 1. Dezember 2009

Hallo,

ich habe seit ein paar Tagen leider das gleiche Problem. Kabelanschlüsse habe ich kontrolliert, alles i.O.
Über das Plugin Femon bekomme ich beim zweiten Interface zwar ein Signal (ist auch gelb hinterlegt. Alles andere (Lock, Carrier und Sync) ist rot, Viterby springt manchmal von rot auf gelb.

Hat jemand eine Idee? Könnte es am Update auf den CT' VDR 7.0 liegen? Treiberproblem?
Das liplianin Treiberpaket habe ich installiert, leder ohne Erfolg...

Grüsse,

hemig

Nexus-s + Nova-S-Plus + Aufnehmen = "emergency exit!"

Jetzt mitmachen!

Teilen