[Announce] Mahlzeit-ISO 4.0beta (mit Activy-Unterstützung und Software-Output)

Quote

Original von Chrisko
Hallo Brombeerwilli,

hast du Mahlzeit 3.2 oder 4.0 beta als Grundlage genommen? Vielleicht probier ich nachher mal die 4.0 beta zu nehmen und dannach nochmals das Toxic softdevice plugin drüber laufen zu lassen? Was meinst du ergibt das sinn oder nicht?

Gruss chrisko

Moin chrisko
so hab ich das installiert:

1. Linvdr 0.7 
2. Dr Seltsam Kernel (Danke an Dr. Seltsam@VDRPortal)
wget http://drseltsam.device.name/vdr/linvdr-kernel-2.6.18.tgz
tar xfvz linvdr-kernel-2.6.18.tgz -C /
depmod -ae
reboot
3. Tarandor / MT Patch 
wget http://nella.de/pub/vdr/libs4linvdr-complete-061109.tar.bz2
tar xfvj libs4linvdr-complete-061109.tar.bz2 -C /
depmod -ae
ldconfig
reboot
4. Toxics Patche (Das bin ich!! ;o) )
wget http://www.vdr-online.org/vdr-1.4.6-extp23-tt-20070328.tar.bz2
tar xfvj /wo/ist/die/datei/vdr-1.4.6-extp23-tt-20070328.tar.bz2 -C 
depmod -ae
ldconfig
reboot/

und dann da [NEU] Softdevice über Vidix auf LinVDR 0.7 (VGA/DVI-Budget-VDR) weiter
Welcher Weg noch so Sinn macht, weiß ich wirklich nicht! Bin eigenlich eher son Dummuser
Gruß
brombeerwilli

Das wird sowieso schwierig, wenn das FFMPEG für Softdevice drauf ist, laufen einige VDR-Plugins nicht mehr (z.B. Image)! Wenn also alles auf einmal laufen soll, müssten wir uns dafür ein spezielles Startscript überlegen!

HI Hab ne Radeon 9250 Damit sollte es dch gehen oder net ? Na ja werd erstmal n wenig basteln bin auch gerade erst zuhase.Probier das mit dem ir empfänger erstmal aus. Aber das is das kleinere Problem denke ich viel schlimmer ist, daß ich kein bild hab

Die Radeon sollte optimal sein, benutze selber momentan eine 9200!

So also nun zum Probelm 1 LIRC
Apr 3 13:08:13 linvdr user.err vdr: [1545] remote: unable to open '/dev/input/event0': No such device
Apr 3 13:08:13 linvdr user.err vdr: [1545] ERROR: /dev/input/event0: No such device
Apr 3 13:08:15 linvdr user.err vdr: [1545] ERROR: /dev/input/event0: No such device

Hab Folgendes gemacht
mkdir -p /etc/vdr/plugins/remote
echo "PARA="-i autodetect" > /etc/vdr/plugins/remote/plugin.conf
Und es ändert sich nix
linvdr:~# dmesg
ller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Time: tsc clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
cdfs 2.6.19 loaded.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 16, io mem 0xdffffe00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: VIA Rhine III at 0x1ec00, 00:e0:7d:f0:4b:49, IRQ 17.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
powernow-k8: Processor cpuid 6a0 not supported
saa7146: register extension 'budget dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'dpc7146 demonstration board'.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7146: found saa7146 @ mem e0cbac00 (revision 1, irq 18) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:20:f0:97
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input4
dvb-ttpci: found av7110-0.
saa7146: register extension 'hexium gemini'.
saa7146: register extension 'hexium HV-PCI6 Orion'.
saa7146: register extension 'Multimedia eXtension Board'.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.5 to 64
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'dpc7146 demonstration board'.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:00:07.0 disabled
saa7146: unregister extension 'hexium gemini'.
saa7146: unregister extension 'hexium HV-PCI6 Orion'.
saa7146: unregister extension 'Multimedia eXtension Board'.
ACPI: PCI interrupt for device 0000:00:11.5 disabled
gameport: kgameportd exiting
saa7146: register extension 'budget dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'dpc7146 demonstration board'.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7146: found saa7146 @ mem e0cbac00 (revision 1, irq 18) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:20:f0:97
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input5
dvb-ttpci: found av7110-0.
saa7146: register extension 'hexium gemini'.
saa7146: register extension 'hexium HV-PCI6 Orion'.
saa7146: register extension 'Multimedia eXtension Board'.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.5 to 64
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'dpc7146 demonstration board'.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:00:07.0 disabled
saa7146: unregister extension 'hexium gemini'.
saa7146: unregister extension 'hexium HV-PCI6 Orion'.
saa7146: unregister extension 'Multimedia eXtension Board'.
ACPI: PCI interrupt for device 0000:00:11.5 disabled
gameport: kgameportd exiting
saa7146: register extension 'budget dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'dpc7146 demonstration board'.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7146: found saa7146 @ mem e0cbac00 (revision 1, irq 18) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:20:f0:97
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input6
dvb-ttpci: found av7110-0.
saa7146: register extension 'hexium gemini'.
saa7146: register extension 'hexium HV-PCI6 Orion'.
saa7146: register extension 'Multimedia eXtension Board'.
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:11.5 to 64
linvdr:~#

linvdr:~# getDVBHardware
budget
budget-av
budget-ci
dpc7146
dvb-ttpci
hexium_gemini
hexium_orion
mxb
linvdr:~#

linvdr:~# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: bfc00000-dfcfffff
Capabilities: [80] Power Management version 2

00:06.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
Subsystem: VIA Technologies, Inc.: Unknown device 0105
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at ec00 [size=256]
Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

00:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend/Hauppauge DVB card rev2.1
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at dffffc00 (32-bit, non-prefetchable) [size=512]

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2

00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32, IRQ 255
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 4720
Flags: medium devsel, IRQ 19
I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA])
Subsystem: Unknown device 1fd3:5960
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at c800 [size=256]
Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
Subsystem: Unknown device 1fd3:5961
Flags: bus master, 66Mhz, medium devsel, latency 32
Memory at c8000000 (32-bit, prefetchable) [size=128M]
Memory at dfee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

linvdr:~#
linvdr:~# lcpci -vn
-bash: lcpci: command not found
linvdr:~#

Aber Bild und Ton sollte doch auch ohne IR vorhanden sein oder.. ???

Auszug aus logread
Apr 3 13:16:00 linvdr user.debug vdr: [6579] tuner on device 1 thread ended (pid=6579, tid=6579)
Apr 3 13:16:01 linvdr user.debug vdr: [6580] section handler thread ended (pid=6580, tid=6580)
Apr 3 13:16:01 linvdr user.debug vdr: [6569] [VideoOut]: Good bye
Apr 3 13:16:01 linvdr user.info vdr: [6569] deleting plugin: softplay
Apr 3 13:16:01 linvdr user.info vdr: [6569] deleting plugin: softdevice
Apr 3 13:16:01 linvdr user.info vdr: [6569] deleting plugin: remote
Apr 3 13:16:01 linvdr user.debug vdr: [6569] max. latency time 0 seconds
wo kann man sehen warum sich das VideoOut beendet.

Hallo Mahlzeit, hallo Toxic,

bin eh grad am Wohnung abstauben, also lass ich die Installation mal durchlaufen wie gesagt auf Basis 4.0 nach Anleitung von Toxic nochmal das Softdevice Packet drüber.
Ich geb dann bescheid obs geklappt hat.

Gruss chrisko

Hallo Mahlzeit,

so nun isses wieder drauf. Wie bereits gestern mitgeteil hab ich ja ein spezielles Onboard Sound Modul das folgendermassen geladen werden müsste

modprobe snd_hda_intel

Ich dachte du hättest das auch schon mit dem linvdrupdater gemacht, doch irgendwie klappts immer noch nicht. Ich hab auf jeden Fall den linvdrupdater drüber laufen lassen und es hat auch keine Fehlermeldungen geben. Was für Angaben brauchst du um das zu überprüfen?
Ich machs solange nochmals von Hand ...
Gruss Chrisko

oke Ohne lirc plugin hab ich Bild.
linvdr:~# lspci -vn
00:00.0 Class 0600: 1106:3099
Subsystem: 1106:0000
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2

00:01.0 Class 0604: 1106:b099
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: bfc00000-dfcfffff
Capabilities: [80] Power Management version 2

00:06.0 Class 0200: 1106:3106 (rev 86)
Subsystem: 1106:0105
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at ec00 [size=256]
Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2

00:07.0 Class 0480: 1131:7146 (rev 01)
Subsystem: 13c2:0003
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at dffffc00 (32-bit, non-prefetchable) [size=512]

00:10.0 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2

00:10.1 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2

00:10.2 Class 0c03: 1106:3038 (rev 80)
Subsystem: 1106:3038
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2

00:10.3 Class 0c03: 1106:3104 (rev 82) (prog-if 20)
Subsystem: 1106:3104
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

00:11.0 Class 0601: 1106:3177
Subsystem: 1106:0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.1 Class 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:0571
Flags: bus master, medium devsel, latency 32, IRQ 255
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2

00:11.5 Class 0401: 1106:3059 (rev 50)
Subsystem: 1462:4720
Flags: medium devsel, IRQ 19
I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2

01:00.0 Class 0300: 1002:5960 (rev 01)
Subsystem: 1fd3:5960
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at c800 [size=256]
Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2

01:00.1 Class 0380: 1002:5940 (rev 01)
Subsystem: 1fd3:5961
Flags: bus master, 66Mhz, medium devsel, latency 32
Memory at c8000000 (32-bit, prefetchable) [size=128M]
Memory at dfee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

Kann ich den dev nicht manuell eintragen wenn ich weiß wo er ist ? mit der autodetect sache scheints nicht zu klappen.
Wenn VDR alleine Startet hab ich kein Bild. Wenn ich es beende und starte hab ich Bild aber.
Immer Kanal nicht verfügbar obwohl EPG da ist.Die channels.conf und diseqc.conf is angepasst.
und noch n neues problem
Apr 3 13:50:19 linvdr user.err vdr: [3022] ERROR (svdrp.c,84): Address already in use
das scheint der sound zu sein.

Hallo Mahlzeit,

leider kann man sagen dass es alles keinen Vorteil gebracht hat. Trotz erneuter Installation des softdevice plugins von Toxic ist der Ton weiterhin der gleiche. Ich hab mal das logread angehängt vielleicht fällt Dir ja was auf. Es scheint auf jeden Fall einen hinweis zu geben das da was nicht stimmt.

Ps: Gib mir bescheid wenn du Angaben wegen der Soundkarte brauchst.

Gruss Chrisko

und wo ist die activy-unterstützung ?
login as: root
root@192.168.6.24's password:
Access denied
root@192.168.6.24's password:
linvdr:~# tvia_overlay -o
tvia_overlay v0.1
Warning: Dead loop while capture off
Warning: Dead Loop while capture on
Warning: Dead Loop while capture on
linvdr:~# tvia_overlay -q
tvia_overlay v0.1
Warning: Dead loop while capture off
linvdr:~# dmesg | grep fb0
fb0: VESA VGA frame buffer device
linvdr:~# lsmod
Module Size Used by
8250 20932 2
serial_core 19840 1 8250
snd_intel8x0 31132 0
snd_ac97_codec 87584 1 snd_intel8x0
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 71176 2 snd_intel8x0,snd_ac97_codec
snd_timer 20868 1 snd_pcm
snd 47844 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7904 1 snd
snd_page_alloc 9864 2 snd_intel8x0,snd_pcm
realmagic84xx 9628 0
mxb 15624 0
hexium_orion 8328 0
hexium_gemini 9096 0
ves1x93 6276 1
dvb_ttpci 93796 10
dpc7146 7304 0
budget_ci 18964 0
ir_common 34052 1 budget_ci
budget_av 19072 0
dvb_pll 14084 1 budget_av
saa7146_vv 44544 6 mxb,hexium_orion,hexium_gemini,dvb_ttpci,dpc7146,budget_av
video_buf 23172 1 saa7146_vv
videodev 26368 1 saa7146_vv
v4l2_common 15488 2 saa7146_vv,videodev
v4l1_compat 12420 2 saa7146_vv,videodev
firmware_class 9728 3 dvb_ttpci,budget_ci,budget_av
budget 12164 0
budget_core 10884 3 budget_ci,budget_av,budget
saa7146 17800 10 mxb,hexium_orion,hexium_gemini,dvb_ttpci,dpc7146,budget_ci,budget_av,saa7146_vv,budget,budget_core
ttpci_eeprom 2560 2 dvb_ttpci,budget_core
dvb_core 73000 5 dvb_ttpci,budget_ci,budget_av,budget,budget_core
i2c_core 20880 12 mxb,hexium_orion,hexium_gemini,ves1x93,dvb_ttpci,dpc7146,budget_ci,budget_av,dvb_pll,budget,budget_core,ttpci_eeprom
natsemi 25696 0
usbhid 22624 0
ehci_hcd 27020 0
uhci_hcd 21772 0
ohci_hcd 18948 0
cdfs 26024 0
linvdr:~# lsmod | grep realmagic84xx
realmagic84xx 9628 0
linvdr:~# tdk5002cctl -s2
Will use sequence 2
Could not open i2c-adapter: /dev/i2c-0
linvdr:~# dmesg
)
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: fc000000-fdffffff
PREFETCH window: 20000000-200fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Simple Boot Flag at 0x69 set to 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 1991, nTxLock = 15931
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xfd000000, mapped to 0xd0980000, using 1875k, total 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=1
vesafb: protected mode interface info at c000:6686
vesafb: pmi: set display start = c00c669f, set palette = c00c66d2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Floppy drive(s): fd1 is 360K PC
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 0000:00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: MAXTOR 6L060J3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117266688 sectors (60040 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(66)
hda: cache flushes supported
hda: hda1 hda2
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
usbmon: debugfs is not available
PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1<6>Time: tsc clocksource has been installed.
S3 S4 S5)
input: PS/2 Logitech Mouse as /class/input/input3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
cdfs 2.6.19 loaded.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
natsemi eth0: NatSemi DP8381[56] at 0xfc100000 (0000:01:08.0), 00:00:04:22:92:68, IRQ 9, port TP.
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
saa7146: register extension 'budget dvb'.
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'dpc7146 demonstration board'.
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
saa7146: found saa7146 @ mem d0b8c000 (revision 1, irq 5) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:01:1f:3d
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: adac type set to 0 @ card 0
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
input: DVB on-card IR receiver as /class/input/input4
dvb-ttpci: found av7110-0.
saa7146: register extension 'hexium gemini'.
saa7146: register extension 'hexium HV-PCI6 Orion'.
saa7146: register extension 'Multimedia eXtension Board'.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
em84xx: EM84xx 8400 (rev 1) bus: 1, devfn: 80, irq: 10,memory: 0xfc000000.
em84xx: mapped-memory at 0xd0d00000
quasar_dev_id: #33792
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50394 usecs
intel8x0: clocking to 48000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
linvdr:~#

ich habe kein bild weter mit tdk noch mit overlay
mfg det

Es war eine Vollinstallation
Im Setup Activy mit LCD
Frage nach dem Overlay mit ja beantwortet
es wirrt kein Modul realmagic84xx geladen auch i2c nicht
login as: root
linvdr:~# lsmod
Module Size Used by
8250 20932 2
serial_core 19840 1 8250
snd_intel8x0 31132 0
snd_ac97_codec 87584 1 snd_intel8x0
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 71176 2 snd_intel8x0,snd_ac97_codec
snd_timer 20868 1 snd_pcm
snd 47844 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7904 1 snd
snd_page_alloc 9864 2 snd_intel8x0,snd_pcm
realmagic84xx 9628 0
mxb 15624 0
hexium_orion 8328 0
hexium_gemini 9096 0
ves1x93 6276 1
dvb_ttpci 93796 10
dpc7146 7304 0
budget_ci 18964 0
ir_common 34052 1 budget_ci
budget_av 19072 0
dvb_pll 14084 1 budget_av
saa7146_vv 44544 6 mxb,hexium_orion,hexium_gemini,dvb_ttpci,dpc7146,budget_av
video_buf 23172 1 saa7146_vv
videodev 26368 1 saa7146_vv
v4l2_common 15488 2 saa7146_vv,videodev
v4l1_compat 12420 2 saa7146_vv,videodev
firmware_class 9728 3 dvb_ttpci,budget_ci,budget_av
budget 12164 0
budget_core 10884 3 budget_ci,budget_av,budget
saa7146 17800 10 mxb,hexium_orion,hexium_gemini,dvb_ttpci,dpc7146,budget_ci,budget_av,saa7146_vv,budget,budget_core
ttpci_eeprom 2560 2 dvb_ttpci,budget_core
dvb_core 73000 5 dvb_ttpci,budget_ci,budget_av,budget,budget_core
i2c_core 20880 12 mxb,hexium_orion,hexium_gemini,ves1x93,dvb_ttpci,dpc7146,budget_ci,budget_av,dvb_pll,budget,budget_core,ttpci_eeprom
natsemi 25696 0
usbhid 22624 0
ehci_hcd 27020 0
uhci_hcd 21772 0
ohci_hcd 18948 0
cdfs 26024 0
hier müsen es 2 sein
auch fehlt packetcommand
mfg det

Hallo Mahlzeit,

ich wollte mal fragen, ob es irgendwo eine Pluglinliste gibt.
Es muß ja nicht sein, daß ich das ganze Iso runterlade, um dann festzustellen, daß mein Liebilngsplugin (muggle) immer noch fehlt.

Wenn muggle dabei ist, wäre ich sofort als Tester dabei.

gruß
Austen