Endlosschleife "saa7146: un-/register extension 'DVB'"

DW73 · 17. Januar 2006

Hallo Welt!!

Bin Newbie in der Linux und VDR-Welt und kämpfe mich seit gestern stundenlang mit dem Projekt "c't-VDR und Hauppauge PVR-350 (TV-Out/Scart)" ab...

Mein System im Schnelldurchlauf:
eine PVR-350 als einziges Ein-/Ausgabemedium!
Ein (mehrfach) neu installiertes System vom aktuellen c't-Download-Iso, "auto" installiert, bei der Setup-Wahl der channels.conf verschiedene Möglichkeiten ausprobiert (wo man keins/dbv-s/dvb-c/dvb-t auswählen kann).
APT-Get für neuesten Kernel, AnalogTV, PVR-350 durchgeführt, Firmwaredateien für IVTV kopiert, bastel hier, bastel da...Channels.conf mit Daten für Analog-TV gefüllt (copy&paste aus dem Web)...

Hab es nach endlosen Googleleien nun auch geschafft, das IVTV anscheinend ganz OK ans laufen zu kriegen - immerhin schaltet der Fernseher nun nicht mehr auf "kein Signal", sondern bringt ein schwarzes Bild... (so kann man sich auch über Kleinigkeiten freuen)
Es passiert aber nichts weiter, auch nicht wenn ich M für Menü drücke, es scheint noch nicht zum letzten Durchbruch gekommen zu sein...

Nach dem END INIT IVTV hängt die Alt-F8-Konsole in einer Endlosschleife mit den Meldungen:
Jan 17 22:20:15 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 17 22:20:17 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:20:33 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 17 22:20:36 localhost kernel: saa7146: register extension 'dvb'.

Ich vermute doch mal, daß er ohne diese Meldungen etwas sinnvolles machen würde - z.B. erstmal ein paar weitere Sachen, dann ein Bild anzeigen?

Oder bin ich da ganz auf dem Holzweg?

Gebt mir doch bitte mal einen Tipp, WAS das ist, WARUM es auftreten könnte, WIE ich es wegkrieg und WELCHE Infos/Logs ich euch ggf für weiteren Support zur Verfügung stellen müsste...

Danke für 'nen kleinen Schluck Denkanregung

JA, mir sind die Fehlermeldungen im Syslog aufgefallen - aber welche sind davon existenziell wichtig und welche sind rein "informativ"?

Gruß
Daniel

-------------------------------------
Jan 17 22:08:18 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 17 22:08:18 localhost kernel: Linux video capture interface: v1.00
Jan 17 22:08:18 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Jan 17 22:08:18 localhost kernel: ivtv: version 0.4.1 (tagged release) loading
Jan 17 22:08:18 localhost kernel: ivtv: Linux version: 2.6.15-ct-1 preempt 586 gcc-3.3
Jan 17 22:08:18 localhost kernel: ivtv: In case of problems please include the debug info between
Jan 17 22:08:18 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Jan 17 22:08:18 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Jan 17 22:08:18 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
Jan 17 22:08:18 localhost kernel: ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKD] -> GSI 9 (level, low)
-> IRQ 9
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8318037
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eepro
m 0x74)
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: audio processor is MSP4418 (idx 25)
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
Jan 17 22:08:18 localhost kernel: tveeprom 1-0050: has radio, has IR remote
Jan 17 22:08:18 localhost kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Jan 17 22:08:18 localhost kernel: saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
Jan 17 22:08:18 localhost kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
Jan 17 22:08:18 localhost kernel: msp3400 1-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simp
ler
Jan 17 22:08:18 localhost kernel: msp3400 1-0040: msp34xxg daemon started
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40]
Jan 17 22:08:18 localhost kernel: tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
Jan 17 22:08:18 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
Jan 17 22:08:18 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Jan 17 22:08:18 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Jan 17 22:08:18 localhost kernel: ivtv0: Encoder revision: 0x02040011
Jan 17 22:08:18 localhost kernel: ivtv0: Decoder revision: 0x02020023
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB tota
l)
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total
)
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
Jan 17 22:08:18 localhost kernel: ivtv0: Create encoder radio stream
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total
)
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
Jan 17 22:08:18 localhost kernel: ivtv0: Create decoder VOUT stream
Jan 17 22:08:18 localhost kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
Jan 17 22:08:18 localhost kernel: ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes)
Jan 17 22:08:18 localhost kernel: tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Jan 17 22:08:18 localhost kernel: ivtv0: Initialized WinTV PVR 350, card #0
Jan 17 22:08:18 localhost kernel: ivtv: ==================== END INIT IVTV ====================
Jan 17 22:08:18 localhost kernel: spurious 8259A interrupt: IRQ7.
Jan 17 22:08:18 localhost kernel: Real Time Clock Driver v1.12
Jan 17 22:08:18 localhost kernel: input: PC Speaker as /class/input/input2
Jan 17 22:08:18 localhost kernel: Floppy drive(s): fd0 is 1.44M
Jan 17 22:08:18 localhost kernel: FDC 0 is a post-1991 82077
Jan 17 22:08:18 localhost kernel: parport: PnPBIOS parport detected.
Jan 17 22:08:18 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Jan 17 22:08:18 localhost kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Jan 17 22:08:18 localhost kernel: NET: Registered protocol family 17
Jan 17 22:08:20 localhost kernel: NET: Registered protocol family 10
Jan 17 22:08:20 localhost kernel: lo: Disabled Privacy Extensions
Jan 17 22:08:20 localhost kernel: IPv6 over IPv4 tunneling driver
Jan 17 22:08:28 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:08:31 localhost kernel: eth0: no IPv6 routers present
Jan 17 22:08:45 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 17 22:08:48 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:09:03 localhost kernel: saa7146: unregister extension 'dvb'.

--------------------------------
Ein Stück Syslog:

Jan 17 22:08:18 localhost kernel: ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes)
Jan 17 22:08:18 localhost kernel: tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Jan 17 22:08:18 localhost kernel: ivtv0: Initialized WinTV PVR 350, card #0
Jan 17 22:08:18 localhost kernel: ivtv: ==================== END INIT IVTV ====================
Jan 17 22:08:18 localhost kernel: spurious 8259A interrupt: IRQ7.
Jan 17 22:08:18 localhost kernel: Real Time Clock Driver v1.12
Jan 17 22:08:18 localhost kernel: input: PC Speaker as /class/input/input2
Jan 17 22:08:18 localhost kernel: Floppy drive(s): fd0 is 1.44M
Jan 17 22:08:18 localhost kernel: FDC 0 is a post-1991 82077
Jan 17 22:08:18 localhost kernel: parport: PnPBIOS parport detected.
Jan 17 22:08:18 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Jan 17 22:08:18 localhost kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Jan 17 22:08:18 localhost kernel: NET: Registered protocol family 17
Jan 17 22:08:20 localhost kernel: NET: Registered protocol family 10
Jan 17 22:08:20 localhost kernel: lo: Disabled Privacy Extensions
Jan 17 22:08:20 localhost kernel: IPv6 over IPv4 tunneling driver
Jan 17 22:08:22 localhost udev[3616]: creating device node '/dev/fd0'
Jan 17 22:08:25 localhost vdr: deleting plugin: xine
Jan 17 22:08:25 localhost vdr: deleting plugin: pvr350
Jan 17 22:08:25 localhost vdr: deleting plugin: femon
Jan 17 22:08:25 localhost vdr: deleting plugin: analogtv
Jan 17 22:08:25 localhost udev[3785]: creating device node '/dev/vcs8'
Jan 17 22:08:26 localhost udev[3786]: creating device node '/dev/vcsa8'
Jan 17 22:08:26 localhost udev[3799]: removing device node '/dev/vcs8'
Jan 17 22:08:26 localhost udev[3816]: removing device node '/dev/vcsa8'
Jan 17 22:08:26 localhost udev[3822]: creating device node '/dev/vcs8'
Jan 17 22:08:26 localhost udev[3845]: removing device node '/dev/vcs8'
Jan 17 22:08:26 localhost /usr/sbin/cron[3853]: (CRON) INFO (pidfile fd = 3)
Jan 17 22:08:26 localhost /usr/sbin/cron[3857]: (CRON) STARTUP (fork ok)
Jan 17 22:08:26 localhost /usr/sbin/cron[3857]: (CRON) INFO (Running @reboot jobs)
Jan 17 22:08:26 localhost udev[3880]: removing device node '/dev/vcs1'
Jan 17 22:08:26 localhost udev[3871]: creating device node '/dev/vcs8'
Jan 17 22:08:26 localhost udev[3881]: removing device node '/dev/vcsa1'
Jan 17 22:08:26 localhost udev[3837]: creating device node '/dev/vcsa8'
Jan 17 22:08:26 localhost udev[3899]: removing device node '/dev/vcs8'
Jan 17 22:08:27 localhost udev[3908]: creating device node '/dev/vcs4'
Jan 17 22:08:27 localhost udev[3909]: creating device node '/dev/vcsa4'
Jan 17 22:08:27 localhost udev[3915]: removing device node '/dev/vcsa8'
Jan 17 22:08:27 localhost udev[3918]: creating device node '/dev/vcs6'
Jan 17 22:08:27 localhost udev[3922]: creating device node '/dev/vcs3'
Jan 17 22:08:27 localhost udev[3923]: creating device node '/dev/vcsa3'
Jan 17 22:08:27 localhost udev[3926]: creating device node '/dev/vcs2'
Jan 17 22:08:27 localhost udev[3940]: creating device node '/dev/vcsa2'
Jan 17 22:08:27 localhost udev[3956]: creating device node '/dev/vcs1'
Jan 17 22:08:27 localhost udev[3962]: creating device node '/dev/vcsa1'
Jan 17 22:08:27 localhost udev[3976]: creating device node '/dev/vcs5'
Jan 17 22:08:27 localhost udev[3977]: creating device node '/dev/vcsa5'
Jan 17 22:08:27 localhost udev[3919]: creating device node '/dev/vcsa6'
Jan 17 22:08:28 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:08:31 localhost kernel: eth0: no IPv6 routers present
Jan 17 22:08:44 localhost udev[4185]: creating device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4202]: removing device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4210]: creating device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4216]: removing device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4222]: creating device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4228]: removing device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4234]: creating device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4240]: removing device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4246]: creating device node '/dev/vcsa8'
Jan 17 22:08:44 localhost udev[4254]: creating device node '/dev/vcs8'
Jan 17 22:08:44 localhost udev[4260]: removing device node '/dev/vcs8'
Jan 17 22:08:44 localhost vdr[4188]: VDR version 1.3.37 started
Jan 17 22:08:44 localhost vdr[4188]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.3.37
Jan 17 22:08:44 localhost vdr[4188]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.37
Jan 17 22:08:44 localhost vdr[4188]: loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.37
Jan 17 22:08:44 localhost vdr[4188]: loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.3.37
Jan 17 22:08:44 localhost vdr[4188]: loading /var/lib/vdr/setup.conf
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrBackground = -2008809472
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrChannelDate = -2236963
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrChannelName = -2236963
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrConfirmLine = -870138932
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrEpgData = -2008809472
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrEpgTime = -1442840389
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrErrorLine = -870178100
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrHelpBlue = -859045888
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrHelpGreen = -870147806
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrHelpRed = -870178100
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrHelpYellow = -870138932
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrInfoLine = -1140858352
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrScrolLine = -1140858352
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: BgClrTitleLine = -1140858352
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ChannelLogo = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrChannelDate = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrChannelName = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrConfirmFont = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrEpgTime = 4
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrErrorFont = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrInfoFont = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrMenuFont = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrScrolLine = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrSubTitle = 4
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrSymbolOff = 8
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrSymbolOn = 4
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrTimeBar1 = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrTimeBar2 = 8
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrTitle = 7
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrTitleLine = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ClrVolumeBar = 3
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ConfirmSwitchTimers = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: LiveMultichannelAudio = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: LogoColorScheme = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: MenuCommandPos = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: OSDxoffset = 0
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: PlayMultichannelAudio = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ProgressBar = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: ShowWeekdays = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: SmallFonts = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: Symbol = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: Theme = 2
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: TimeBar = 1
Jan 17 22:08:44 localhost vdr[4188]: ERROR: unknown config parameter: analogtv.avSyncHack = 0
Jan 17 22:08:44 localhost vdr[4188]: loading /var/lib/vdr/sources.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/diseqc.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/channels.conf
Jan 17 22:08:45 localhost udev[4267]: creating device node '/dev/vcs8'
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/commands.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/reccmds.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/svdrphosts.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/ca.conf
Jan 17 22:08:45 localhost udev[4273]: removing device node '/dev/vcs8'
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/remote.conf
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/keymacros.conf
Jan 17 22:08:45 localhost udev[4280]: creating device node '/dev/vcs8'
Jan 17 22:08:45 localhost vdr[4188]: reading EPG data from /var/cache/vdr/epg.data
Jan 17 22:08:45 localhost vdr[4188]: no DVB device found
Jan 17 22:08:45 localhost vdr[4188]: initializing plugin: analogtv (0.9.37): Watch analogue TV
Jan 17 22:08:45 localhost vdr[4188]: initializing plugin: femon (0.9.5): DVB Signal Information Monitor (OSD)
Jan 17 22:08:45 localhost vdr[4188]: initializing plugin: pvr350 (0.0.4pre1): An output device for the PVR350
Jan 17 22:08:45 localhost vdr[4188]: initializing plugin: xine (0.7.6-net): Software based playback using xine over network
Jan 17 22:08:45 localhost vdr[4286]: video directory scanner thread started (pid=4286, tid=16386)
Jan 17 22:08:45 localhost vdr[4287]: XineRemote control thread started (pid=4287, tid=32771)
Jan 17 22:08:45 localhost vdr[4287]: Entering cXineRemote thread
Jan 17 22:08:45 localhost vdr[4286]: video directory scanner thread ended (pid=4286, tid=16386)
Jan 17 22:08:45 localhost vdr[4188]: setting primary device to 1
Jan 17 22:08:45 localhost vdr[4188]: device 1 has no MPEG decoder
Jan 17 22:08:45 localhost vdr[4188]: trying device number 2 instead
Jan 17 22:08:45 localhost vdr[4188]: setting primary device to 2
Jan 17 22:08:45 localhost vdr[4188]: SVDRP listening on port 2001
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 17 22:08:45 localhost vdr[4188]: starting plugin: analogtv
Jan 17 22:08:45 localhost vdr[4188]: starting plugin: femon
Jan 17 22:08:45 localhost vdr[4188]: starting plugin: pvr350
Jan 17 22:08:45 localhost vdr[4188]: starting plugin: xine
Jan 17 22:08:45 localhost vdr[4188]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 17 22:08:45 localhost vdr[4188]: ERROR: /dev/lircd: No such file or directory
Jan 17 22:08:45 localhost vdr[4188]: ERROR: remote control XineRemote not ready!
Jan 17 22:08:45 localhost vdr[4188]: ERROR: remote control LIRC not ready!
Jan 17 22:08:45 localhost vdr[4188]: remote control KBD - keys known
Jan 17 22:08:45 localhost vdr[4188]: switching to channel 7
Jan 17 22:08:45 localhost vdr[4290]: KBD remote control thread started (pid=4290, tid=81925)
Jan 17 22:08:45 localhost vdr[4188]: info: Kanal nicht verfügbar!
Jan 17 22:08:45 localhost runvdr: restarting VDR
Jan 17 22:08:45 localhost udev[4295]: removing device node '/dev/vcs8'
Jan 17 22:08:45 localhost udev[4296]: removing device node '/dev/vcsa8'
Jan 17 22:08:45 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 17 22:08:48 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:09:03 localhost vdr[4386]: VDR version 1.3.37 started
Jan 17 22:09:03 localhost vdr[4386]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.3.37
Jan 17 22:09:03 localhost vdr[4386]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.37
Jan 17 22:09:03 localhost udev[4389]: creating device node '/dev/vcs8'
Jan 17 22:09:03 localhost udev[4390]: creating device node '/dev/vcsa8'
Jan 17 22:09:03 localhost vdr[4386]: loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.37
Jan 17 22:09:03 localhost vdr[4386]: loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.3.37
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/setup.conf
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrBackground = -2008809472
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrChannelDate = -2236963
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrChannelName = -2236963
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrConfirmLine = -870138932
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrEpgData = -2008809472
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrEpgTime = -1442840389
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrErrorLine = -870178100
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrHelpBlue = -859045888
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrHelpGreen = -870147806
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrHelpRed = -870178100
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrHelpYellow = -870138932
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrInfoLine = -1140858352
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrScrolLine = -1140858352
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: BgClrTitleLine = -1140858352
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ChannelLogo = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrChannelDate = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrChannelName = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrConfirmFont = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrEpgTime = 4
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrErrorFont = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrInfoFont = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrMenuFont = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrScrolLine = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrSubTitle = 4
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrSymbolOff = 8
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrSymbolOn = 4
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrTimeBar1 = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrTimeBar2 = 8
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrTitle = 7
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrTitleLine = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ClrVolumeBar = 3
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ConfirmSwitchTimers = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: LiveMultichannelAudio = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: LogoColorScheme = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: MenuCommandPos = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: OSDxoffset = 0
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: PlayMultichannelAudio = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ProgressBar = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: ShowWeekdays = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: SmallFonts = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: Symbol = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: Theme = 2
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: TimeBar = 1
Jan 17 22:09:03 localhost vdr[4386]: ERROR: unknown config parameter: analogtv.avSyncHack = 0
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/sources.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/diseqc.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/channels.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/commands.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/reccmds.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/svdrphosts.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/ca.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/remote.conf
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/keymacros.conf
Jan 17 22:09:03 localhost vdr[4386]: reading EPG data from /var/cache/vdr/epg.data
Jan 17 22:09:03 localhost vdr[4386]: no DVB device found
Jan 17 22:09:03 localhost vdr[4386]: initializing plugin: analogtv (0.9.37): Watch analogue TV
Jan 17 22:09:03 localhost vdr[4386]: initializing plugin: femon (0.9.5): DVB Signal Information Monitor (OSD)
Jan 17 22:09:03 localhost vdr[4386]: initializing plugin: pvr350 (0.0.4pre1): An output device for the PVR350
Jan 17 22:09:03 localhost vdr[4386]: initializing plugin: xine (0.7.6-net): Software based playback using xine over network
Jan 17 22:09:03 localhost vdr[4386]: setting primary device to 1
Jan 17 22:09:03 localhost vdr[4386]: device 1 has no MPEG decoder
Jan 17 22:09:03 localhost vdr[4386]: trying device number 2 instead
Jan 17 22:09:03 localhost vdr[4386]: setting primary device to 2
Jan 17 22:09:03 localhost vdr[4386]: SVDRP listening on port 2001
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 17 22:09:03 localhost vdr[4386]: starting plugin: analogtv
Jan 17 22:09:03 localhost vdr[4401]: video directory scanner thread started (pid=4401, tid=16386)
Jan 17 22:09:03 localhost vdr[4401]: video directory scanner thread ended (pid=4401, tid=16386)
Jan 17 22:09:03 localhost vdr[4402]: XineRemote control thread started (pid=4402, tid=32771)
Jan 17 22:09:03 localhost vdr[4402]: Entering cXineRemote thread
Jan 17 22:09:03 localhost vdr[4386]: starting plugin: femon
Jan 17 22:09:03 localhost vdr[4386]: starting plugin: pvr350
Jan 17 22:09:03 localhost vdr[4386]: starting plugin: xine
Jan 17 22:09:03 localhost vdr[4386]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 17 22:09:03 localhost vdr[4386]: ERROR: /dev/lircd: No such file or directory
Jan 17 22:09:03 localhost vdr[4406]: KBD remote control thread started (pid=4406, tid=81925)
Jan 17 22:09:03 localhost vdr[4386]: ERROR: remote control XineRemote not ready!
Jan 17 22:09:03 localhost vdr[4386]: ERROR: remote control LIRC not ready!
Jan 17 22:09:03 localhost vdr[4386]: remote control KBD - keys known
Jan 17 22:09:03 localhost vdr[4386]: switching to channel 7
Jan 17 22:09:03 localhost vdr[4386]: info: Kanal nicht verfügbar!
Jan 17 22:09:03 localhost runvdr: restarting VDR
Jan 17 22:09:03 localhost udev[4413]: removing device node '/dev/vcsa8'
Jan 17 22:09:03 localhost udev[4412]: removing device node '/dev/vcs8'
Jan 17 22:09:03 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 17 22:09:06 localhost kernel: saa7146: register extension 'dvb'.
Jan 17 22:09:21 localhost udev[4507]: creating device node '/dev/vcs8'
Jan 17 22:09:21 localhost udev[4508]: creating device node '/dev/vcsa8'
Jan 17 22:09:21 localhost vdr[4504]: VDR version 1.3.37 started
Jan 17 22:09:21 localhost vdr[4504]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.3.37
Jan 17 22:09:21 localhost vdr[4504]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.37
Jan 17 22:09:21 localhost vdr[4504]: loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.37
Jan 17 22:09:21 localhost vdr[4504]: loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.3.37
Jan 17 22:09:21 localhost vdr[4504]: loading /var/lib/vdr/setup.conf
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrBackground = -2008809472
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrChannelDate = -2236963
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrChannelName = -2236963
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrConfirmLine = -870138932
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrEpgData = -2008809472
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrEpgTime = -1442840389
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrErrorLine = -870178100
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrHelpBlue = -859045888
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrHelpGreen = -870147806
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrHelpRed = -870178100
Jan 17 22:09:21 localhost vdr[4504]: ERROR: unknown config parameter: BgClrHelpYellow = -8701389

Negge · 18. Januar 2006

Zitat

... WELCHE Infos/Logs ich euch ggf für weiteren Support zur Verfügung stellen müsste...
JA, mir sind die Fehlermeldungen im Syslog aufgefallen - aber welche sind davon existenziell wichtig und welche sind rein "informativ"?

Ich würde sagen dass Syslog ist schon das richtige.

Allerdings hab ich da die Ursache nun auch nicht gesehen. Diese DVB-Register/Unregister-Schleife hatte ich auch schon das eine oder andere mal. Meist war dann die channels.conf defekt (stand dann aber auch im syslog, das die channels.conf einen Fehler in Zeile soundso hatte). Bei dir hab ich jetzt nicht dergleichen gefunden.

Evtl. könnten diese Zeilen ursächlich sein:

Zitat

... WELCHE Infos/Logs ich euch ggf für weiteren Support zur Verfügung stellen müsste...
JA, mir sind die Fehlermeldungen im Syslog aufgefallen - aber welche sind davon existenziell wichtig und welche sind rein "informativ"?

Jan 17 22:09:03 localhost vdr[4386]: ERROR: /dev/lircd: No such file or directory
Jan 17 22:09:03 localhost vdr[4386]: ERROR: remote control XineRemote not ready!
Jan 17 22:09:03 localhost vdr[4386]: ERROR: remote control LIRC not ready![/QUOTE]

Die ganzen anderen Fehler der setup.conf bekommst du übrigens weg, indem du die überflüssigen Daten aus der setup.conf entfernst. Die machen aber in der Regel nichts.

DW73 · 18. Januar 2006

Danke für die Hinweise, schon wieder ein Stück schlauer geworden

Den Fehler des LIRC krieg ich nicht weg - scheint aber auch nicht weiter zu stören, da er augenscheinlich nen Keyboard-Treiber für die Menüsteuerung nimmt...Den Rest hab ich mal rausgenommen...

Der Tipp mit der channels.conf war schonmal nicht schlecht, da hatte ich anscheinend ziemlichen Murks drin. Hab mir jetzt zum Testen eine einkanalige gebastelt und kann die ARD per cat /dev/video0 als Mpeg mit Bild und Ton speichern - der Empfang scheint also zu klappen...
TV bleibt aber immer noch schwarz (beim Initialisieren hab ich mal gaaaaanz kurz zwei wirre Farbstreifen drauf)

Anbei mal eine aktuelle Syslog, vielleicht gibt die ja (neue) Aufschlüsse...

- hatte im Wiki irgendwo gelesen, daß man beim Analogtv/IVTV/PVR-350 noch "einen Framebuffer aktivieren muss, was standardmäßig nicht der Fall ist"...kann das was spannendes sein und wenn ja - wie geht das?

-Jan 18 21:53:59 localhost vdr[4310]: no DVB device found
muss mir das Sorgen machen? Erkennt er das AnalogTV nicht als DVB-Emu?

----------------------------------
Jan 18 21:53:33 localhost syslogd 1.4.1#17: restart.
Jan 18 21:53:33 localhost kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Jan 18 21:53:33 localhost kernel: Inspecting /boot/System.map-2.6.15-ct-1
Jan 18 21:53:33 localhost kernel: Loaded 21678 symbols from /boot/System.map-2.6.15-ct-1.
Jan 18 21:53:33 localhost kernel: Symbols match kernel version 2.6.15.
Jan 18 21:53:33 localhost kernel: No module symbols loaded - kernel modules not enabled.
Jan 18 21:53:33 localhost kernel: Linux version 2.6.15-ct-1 (root@debuild2) (gcc-Version 3.3.5 (Debian 1:3.3.5-13)) #1 PREEMPT Wed Jan 11 16:28:05 UTC 2006
Jan 18 21:53:33 localhost kernel: BIOS-provided physical RAM map:
Jan 18 21:53:33 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 0000000017f00000 - 0000000018000000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Jan 18 21:53:33 localhost kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Jan 18 21:53:33 localhost kernel: 0MB HIGHMEM available.
Jan 18 21:53:33 localhost kernel: 382MB LOWMEM available.
Jan 18 21:53:33 localhost kernel: On node 0 totalpages: 98032
Jan 18 21:53:33 localhost kernel: DMA zone: 4096 pages, LIFO batch:0
Jan 18 21:53:33 localhost kernel: DMA32 zone: 0 pages, LIFO batch:0
Jan 18 21:53:33 localhost kernel: Normal zone: 93936 pages, LIFO batch:31
Jan 18 21:53:33 localhost kernel: HighMem zone: 0 pages, LIFO batch:0
Jan 18 21:53:33 localhost kernel: DMI present.
Jan 18 21:53:33 localhost kernel: ACPI: RSDP (v000 PTLTD ) @ 0x000f7570
Jan 18 21:53:33 localhost kernel: ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x17efc077
Jan 18 21:53:33 localhost kernel: ACPI: FADT (v001 FSC D1214/15 0x06040001 0x000f4240) @ 0x17efc0a7
Jan 18 21:53:33 localhost kernel: ACPI: MADT (v001 FSC ^I APIC 0x06040001 CSF 0x00000000) @ 0x17efef7e
Jan 18 21:53:33 localhost kernel: ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x17efefd8
Jan 18 21:53:33 localhost kernel: ACPI: DSDT (v001 FSC D1214/15 0x06040001 MSFT 0x0100000c) @ 0x00000000
Jan 18 21:53:33 localhost kernel: ACPI: PM-Timer IO Port: 0xf008
Jan 18 21:53:33 localhost kernel: Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000)
Jan 18 21:53:33 localhost kernel: Built 1 zonelists
Jan 18 21:53:33 localhost kernel: Kernel command line: root=/dev/hda1 ro BOOT_I
Jan 18 21:53:33 localhost kernel: Initializing CPU#0
Jan 18 21:53:33 localhost kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
Jan 18 21:53:33 localhost kernel: Detected 795.698 MHz processor.
Jan 18 21:53:33 localhost kernel: Using pmtmr for high-res timesource
Jan 18 21:53:33 localhost kernel: Console: colour VGA+ 80x25
Jan 18 21:53:33 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 18 21:53:33 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 18 21:53:33 localhost kernel: Memory: 380772k/392128k available (1591k kernel code, 10764k reserved, 516k data, 144k init, 0k highmem)
Jan 18 21:53:33 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan 18 21:53:33 localhost kernel: Calibrating delay using timer specific routine.. 1594.06 BogoMIPS (lpj=3188130)
Jan 18 21:53:33 localhost kernel: Security Framework v1.0.0 initialized
Jan 18 21:53:33 localhost kernel: Mount-cache hash table entries: 512
Jan 18 21:53:33 localhost kernel: CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Jan 18 21:53:33 localhost kernel: CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Jan 18 21:53:33 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 18 21:53:33 localhost kernel: CPU: L2 cache: 256K
Jan 18 21:53:33 localhost kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Jan 18 21:53:33 localhost kernel: Intel machine check architecture supported.
Jan 18 21:53:33 localhost kernel: Intel machine check reporting enabled on CPU#0.
Jan 18 21:53:33 localhost kernel: mtrr: v2.0 (20020519)
Jan 18 21:53:33 localhost kernel: CPU: Intel Pentium III (Coppermine) stepping 06
Jan 18 21:53:33 localhost kernel: Enabling fast FPU save and restore... done.
Jan 18 21:53:33 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 18 21:53:33 localhost kernel: Checking 'hlt' instruction... OK.
Jan 18 21:53:33 localhost kernel: ACPI: setting ELCR to 0200 (from 0e20)
Jan 18 21:53:33 localhost kernel: checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Jan 18 21:53:33 localhost kernel: Freeing initrd memory: 4816k freed
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 16
Jan 18 21:53:33 localhost kernel: ACPI: bus type pci registered
Jan 18 21:53:33 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
Jan 18 21:53:33 localhost kernel: PCI: Using configuration type 1
Jan 18 21:53:33 localhost kernel: ACPI: Subsystem revision 20050902
Jan 18 21:53:33 localhost kernel: ACPI: Interpreter enabled
Jan 18 21:53:33 localhost kernel: ACPI: Using PIC for interrupt routing
Jan 18 21:53:33 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 18 21:53:33 localhost kernel: PCI: Probing PCI hardware (bus 00)
Jan 18 21:53:33 localhost kernel: Boot video device is 0000:00:02.0
Jan 18 21:53:33 localhost kernel: PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
Jan 18 21:53:33 localhost kernel: PCI quirk: region f180-f1bf claimed by ICH4 GPIO
Jan 18 21:53:33 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jan 18 21:53:33 localhost kernel: ACPI: Device [ECP] status [00000008]: functional but not present; setting present
Jan 18 21:53:33 localhost kernel: ACPI: Device [GAME] status [00000008]: functional but not present; setting present
Jan 18 21:53:33 localhost kernel: ACPI: Device [MIDI] status [00000008]: functional but not present; setting present
Jan 18 21:53:33 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 18 21:53:33 localhost kernel: pnp: PnP ACPI init
Jan 18 21:53:33 localhost kernel: pnp: PnP ACPI: found 13 devices
Jan 18 21:53:33 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Jan 18 21:53:33 localhost kernel: PCI: Using ACPI for IRQ routing
Jan 18 21:53:33 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jan 18 21:53:33 localhost kernel: PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
Jan 18 21:53:33 localhost kernel: PCI: Bridge: 0000:00:1e.0
Jan 18 21:53:33 localhost kernel: IO window: 3000-3fff
Jan 18 21:53:33 localhost kernel: MEM window: f0100000-f01fffff
Jan 18 21:53:33 localhost kernel: PREFETCH window: f8000000-fbffffff
Jan 18 21:53:33 localhost kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 18 21:53:33 localhost kernel: Simple Boot Flag at 0x69 set to 0x1
Jan 18 21:53:33 localhost kernel: VFS: Disk quotas dquot_6.5.1
Jan 18 21:53:33 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 18 21:53:33 localhost kernel: Initializing Cryptographic API
Jan 18 21:53:33 localhost kernel: io scheduler noop registered
Jan 18 21:53:33 localhost kernel: io scheduler anticipatory registered
Jan 18 21:53:33 localhost kernel: io scheduler deadline registered
Jan 18 21:53:33 localhost kernel: io scheduler cfq registered
Jan 18 21:53:33 localhost kernel: isapnp: Scanning for PnP cards...
Jan 18 21:53:33 localhost kernel: isapnp: No Plug & Play device found
Jan 18 21:53:33 localhost kernel: PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 18 21:53:33 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 18 21:53:33 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 18 21:53:33 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jan 18 21:53:33 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 18 21:53:33 localhost kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 18 21:53:33 localhost kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 18 21:53:33 localhost kernel: 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 18 21:53:33 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 2
Jan 18 21:53:33 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jan 18 21:53:33 localhost kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 18 21:53:33 localhost kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Jan 18 21:53:33 localhost kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Jan 18 21:53:33 localhost kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jan 18 21:53:33 localhost kernel: TCP reno registered
Jan 18 21:53:33 localhost kernel: TCP bic registered
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 8
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 20
Jan 18 21:53:33 localhost kernel: Using IPI Shortcut mode
Jan 18 21:53:33 localhost kernel: ACPI wakeup devices:
Jan 18 21:53:33 localhost kernel: PCI0 AGPB PCIH USB1 USB2 AC97 MC97 KEYB PS2M COM1 COM2
Jan 18 21:53:33 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jan 18 21:53:33 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Jan 18 21:53:33 localhost kernel: RAMDISK: Loading 4816KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
Jan 18 21:53:33 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly.
Jan 18 21:53:33 localhost kernel: Freeing unused kernel memory: 144k freed
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 1
Jan 18 21:53:33 localhost kernel: SCSI subsystem initialized
Jan 18 21:53:33 localhost kernel: libata version 1.20 loaded.
Jan 18 21:53:33 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 18 21:53:33 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 18 21:53:33 localhost kernel: ICH2: IDE controller at PCI slot 0000:00:1f.1
Jan 18 21:53:33 localhost kernel: ICH2: chipset revision 2
Jan 18 21:53:33 localhost kernel: ICH2: not 100%% native mode: will probe irqs later
Jan 18 21:53:33 localhost kernel: ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:pio
Jan 18 21:53:33 localhost kernel: ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:pio
Jan 18 21:53:33 localhost kernel: Probing IDE interface ide0...
Jan 18 21:53:33 localhost kernel: hda: IBM-DHEA-38451, ATA DISK drive
Jan 18 21:53:33 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 18 21:53:33 localhost kernel: Probing IDE interface ide1...
Jan 18 21:53:33 localhost kernel: hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
Jan 18 21:53:33 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 18 21:53:33 localhost kernel: hda: max request size: 128KiB
Jan 18 21:53:33 localhost kernel: hda: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=16383/16/63, UDMA(33)
Jan 18 21:53:33 localhost kernel: hda: cache flushes not supported
Jan 18 21:53:33 localhost kernel: hda: hda1 hda2 < hda5 hda6 >
Jan 18 21:53:33 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 18 21:53:33 localhost kernel: kjournald starting. Commit interval 5 seconds
Jan 18 21:53:33 localhost kernel: Adding 313228k swap on /dev/hda5. Priority:-1 extents:1 across:313228k
Jan 18 21:53:33 localhost kernel: EXT3 FS on hda1, internal journal
Jan 18 21:53:33 localhost kernel: hdc: ATAPI 61X DVD-ROM drive, 512kB Cache, UDMA(33)
Jan 18 21:53:33 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Jan 18 21:53:33 localhost kernel: input: PS/2 Generic Mouse as /class/input/input1
Jan 18 21:53:33 localhost kernel: kjournald starting. Commit interval 5 seconds
Jan 18 21:53:33 localhost kernel: EXT3 FS on hda6, internal journal
Jan 18 21:53:33 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 18 21:53:33 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jan 18 21:53:33 localhost kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
Jan 18 21:53:33 localhost kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
Jan 18 21:53:33 localhost kernel: PCI: setting IRQ 9 as level-triggered
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
Jan 18 21:53:33 localhost kernel: e100: eth0: e100_probe: addr 0xf0100000, irq 9, MAC addr 00:30:05:08:FE:09
Jan 18 21:53:33 localhost kernel: mice: PS/2 mouse device common for all mice
Jan 18 21:53:33 localhost kernel: ts: Compaq touchscreen protocol output
Jan 18 21:53:33 localhost kernel: Intel 810 + AC97 Audio, version 1.01, 17:13:00 Jan 11 2006
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Jan 18 21:53:33 localhost kernel: PCI: setting IRQ 5 as level-triggered
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan 18 21:53:33 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jan 18 21:53:33 localhost kernel: i810: Intel ICH2 found at IO 0x1c00 and 0x2000, MEM 0x0000 and 0x0000, IRQ 5
Jan 18 21:53:33 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Jan 18 21:53:33 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Jan 18 21:53:33 localhost kernel: i810_audio: Resetting connection 0
Jan 18 21:53:33 localhost kernel: ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
Jan 18 21:53:33 localhost kernel: i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
Jan 18 21:53:33 localhost kernel: usbcore: registered new driver usbfs
Jan 18 21:53:33 localhost kernel: usbcore: registered new driver hub
Jan 18 21:53:33 localhost kernel: USB Universal Host Controller Interface driver v2.3
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Jan 18 21:53:33 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001000
Jan 18 21:53:33 localhost kernel: hub 1-0:1.0: USB hub found
Jan 18 21:53:33 localhost kernel: hub 1-0:1.0: 2 ports detected
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Jan 18 21:53:33 localhost kernel: PCI: setting IRQ 11 as level-triggered
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Jan 18 21:53:33 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.4 to 64
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.4: UHCI Host Controller
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Jan 18 21:53:33 localhost kernel: uhci_hcd 0000:00:1f.4: irq 11, io base 0x00001800
Jan 18 21:53:33 localhost kernel: hub 2-0:1.0: USB hub found
Jan 18 21:53:33 localhost kernel: hub 2-0:1.0: 2 ports detected
Jan 18 21:53:33 localhost kernel: agpgart: Detected an Intel i815 Chipset.
Jan 18 21:53:33 localhost kernel: agpgart: AGP aperture is 64M @ 0xf4000000
Jan 18 21:53:33 localhost kernel: hw_random hardware driver 1.0.0 loaded
Jan 18 21:53:33 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 18 21:53:33 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 18 21:53:33 localhost kernel: Linux video capture interface: v1.00
Jan 18 21:53:33 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Jan 18 21:53:33 localhost kernel: ivtv: version 0.4.1 (tagged release) loading
Jan 18 21:53:33 localhost kernel: ivtv: Linux version: 2.6.15-ct-1 preempt 586 gcc-3.3
Jan 18 21:53:33 localhost kernel: ivtv: In case of problems please include the debug info between
Jan 18 21:53:33 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
Jan 18 21:53:33 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
Jan 18 21:53:33 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
Jan 18 21:53:33 localhost kernel: ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8318037
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74)
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: audio processor is MSP4418 (idx 25)
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
Jan 18 21:53:33 localhost kernel: tveeprom 1-0050: has radio, has IR remote
Jan 18 21:53:33 localhost kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Jan 18 21:53:33 localhost kernel: saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
Jan 18 21:53:33 localhost kernel: saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
Jan 18 21:53:33 localhost kernel: msp3400 1-0040: chip=MSP4418G-B3 +nicam +simple +simpler +radio mode=simpler
Jan 18 21:53:33 localhost kernel: msp3400 1-0040: msp34xxg daemon started
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=MSP4418G-B3, addr=40]
Jan 18 21:53:33 localhost kernel: tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
Jan 18 21:53:33 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
Jan 18 21:53:33 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Jan 18 21:53:33 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Jan 18 21:53:33 localhost kernel: ivtv0: Encoder revision: 0x02040011
Jan 18 21:53:33 localhost kernel: ivtv0: Decoder revision: 0x02020023
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Create encoder radio stream
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: Create decoder VOUT stream
Jan 18 21:53:33 localhost kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
Jan 18 21:53:33 localhost kernel: ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes)
Jan 18 21:53:33 localhost kernel: tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
Jan 18 21:53:33 localhost kernel: spurious 8259A interrupt: IRQ7.
Jan 18 21:53:33 localhost kernel: ivtv0: Initialized WinTV PVR 350, card #0
Jan 18 21:53:33 localhost kernel: ivtv: ==================== END INIT IVTV ====================
Jan 18 21:53:33 localhost kernel: Real Time Clock Driver v1.12
Jan 18 21:53:33 localhost kernel: input: PC Speaker as /class/input/input2
Jan 18 21:53:33 localhost kernel: Floppy drive(s): fd0 is 1.44M
Jan 18 21:53:33 localhost kernel: FDC 0 is a post-1991 82077
Jan 18 21:53:33 localhost kernel: parport: PnPBIOS parport detected.
Jan 18 21:53:33 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Jan 18 21:53:33 localhost kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Jan 18 21:53:33 localhost kernel: NET: Registered protocol family 17
Jan 18 21:53:35 localhost kernel: NET: Registered protocol family 10
Jan 18 21:53:35 localhost kernel: lo: Disabled Privacy Extensions
Jan 18 21:53:35 localhost kernel: IPv6 over IPv4 tunneling driver
Jan 18 21:53:37 localhost udev[3651]: creating device node '/dev/fd0'
Jan 18 21:53:38 localhost udev[3655]: configured rule in '/etc/udev/rules.d/udev.rules[67]' applied, 'event2' becomes 'input/%k'
Jan 18 21:53:38 localhost udev[3655]: creating device node '/dev/input/event2'
Jan 18 21:53:40 localhost vdr: deleting plugin: pvr350
Jan 18 21:53:40 localhost vdr: deleting plugin: analogtv
Jan 18 21:53:41 localhost udev[3834]: creating device node '/dev/vcs8'
Jan 18 21:53:41 localhost udev[3835]: creating device node '/dev/vcsa8'
Jan 18 21:53:41 localhost udev[3848]: removing device node '/dev/vcs8'
Jan 18 21:53:41 localhost udev[3849]: removing device node '/dev/vcsa8'
Jan 18 21:53:41 localhost udev[3861]: creating device node '/dev/vcs8'
Jan 18 21:53:41 localhost udev[3882]: removing device node '/dev/vcs8'
Jan 18 21:53:42 localhost udev[3893]: creating device node '/dev/vcs8'
Jan 18 21:53:42 localhost udev[3877]: creating device node '/dev/vcsa8'
Jan 18 21:53:42 localhost udev[4024]: removing device node '/dev/vcs8'
Jan 18 21:53:43 localhost udev[4035]: removing device node '/dev/vcsa8'
Jan 18 21:53:43 localhost kernel: saa7146: register extension 'dvb'.
Jan 18 21:53:43 localhost /usr/sbin/cron[4101]: (CRON) INFO (pidfile fd = 3)
Jan 18 21:53:43 localhost /usr/sbin/cron[4102]: (CRON) STARTUP (fork ok)
Jan 18 21:53:43 localhost udev[4033]: creating device node '/dev/vcs8'
Jan 18 21:53:43 localhost udev[4087]: creating device node '/dev/vcsa8'
Jan 18 21:53:43 localhost udev[4116]: removing device node '/dev/vcsa8'
Jan 18 21:53:44 localhost udev[4117]: removing device node '/dev/vcs8'
Jan 18 21:53:44 localhost udev[4131]: removing device node '/dev/vcs1'
Jan 18 21:53:44 localhost udev[4132]: removing device node '/dev/vcsa1'
Jan 18 21:53:44 localhost udev[4144]: creating device node '/dev/vcsa8'
Jan 18 21:53:44 localhost /usr/sbin/cron[4102]: (CRON) INFO (Running @reboot jobs)
Jan 18 21:53:44 localhost udev[4159]: creating device node '/dev/vcs5'
Jan 18 21:53:44 localhost udev[4160]: creating device node '/dev/vcsa5'
Jan 18 21:53:44 localhost udev[4163]: creating device node '/dev/vcs4'
Jan 18 21:53:44 localhost udev[4164]: creating device node '/dev/vcsa4'
Jan 18 21:53:44 localhost udev[4167]: creating device node '/dev/vcs6'
Jan 18 21:53:44 localhost udev[4175]: creating device node '/dev/vcsa6'
Jan 18 21:53:44 localhost udev[4193]: creating device node '/dev/vcs3'
Jan 18 21:53:44 localhost udev[4194]: creating device node '/dev/vcsa3'
Jan 18 21:53:44 localhost udev[4206]: creating device node '/dev/vcs2'
Jan 18 21:53:44 localhost udev[4216]: creating device node '/dev/vcsa2'
Jan 18 21:53:44 localhost udev[4220]: creating device node '/dev/vcs1'
Jan 18 21:53:45 localhost udev[4224]: creating device node '/dev/vcsa1'
Jan 18 21:53:45 localhost udev[4251]: removing device node '/dev/vcsa8'
Jan 18 21:53:46 localhost kernel: eth0: no IPv6 routers present
Jan 18 21:53:58 localhost udev[4305]: creating device node '/dev/vcs8'
Jan 18 21:53:58 localhost udev[4307]: creating device node '/dev/vcsa8'
Jan 18 21:53:58 localhost udev[4320]: removing device node '/dev/vcs8'
Jan 18 21:53:58 localhost udev[4324]: removing device node '/dev/vcsa8'
Jan 18 21:53:58 localhost udev[4332]: creating device node '/dev/vcsa8'
Jan 18 21:53:58 localhost udev[4336]: creating device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4342]: removing device node '/dev/vcsa8'
Jan 18 21:53:59 localhost udev[4348]: removing device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4354]: creating device node '/dev/vcsa8'
Jan 18 21:53:59 localhost udev[4360]: creating device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4366]: removing device node '/dev/vcsa8'
Jan 18 21:53:59 localhost udev[4372]: removing device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4378]: creating device node '/dev/vcsa8'
Jan 18 21:53:59 localhost udev[4389]: removing device node '/dev/vcsa8'
Jan 18 21:53:59 localhost vdr[4310]: VDR version 1.3.37 started
Jan 18 21:53:59 localhost vdr[4310]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.3.37
Jan 18 21:53:59 localhost vdr[4310]: loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.37
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/setup.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/sources.conf
Jan 18 21:53:59 localhost udev[4394]: creating device node '/dev/vcs8'
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/diseqc.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/channels.conf
Jan 18 21:53:59 localhost udev[4400]: removing device node '/dev/vcs8'
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/commands.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/reccmds.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/svdrphosts.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/ca.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/remote.conf
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/keymacros.conf
Jan 18 21:53:59 localhost udev[4405]: creating device node '/dev/vcsa8'
Jan 18 21:53:59 localhost vdr[4310]: reading EPG data from /var/cache/vdr/epg.data
Jan 18 21:53:59 localhost vdr[4310]: no DVB device found
Jan 18 21:53:59 localhost vdr[4310]: initializing plugin: analogtv (0.9.37): Watch analogue TV
Jan 18 21:53:59 localhost vdr[4310]: initializing plugin: pvr350 (0.0.4pre1): An output device for the PVR350
Jan 18 21:53:59 localhost vdr[4310]: setting primary device to 2
Jan 18 21:53:59 localhost vdr[4310]: SVDRP listening on port 2001
Jan 18 21:53:59 localhost vdr[4407]: video directory scanner thread started (pid=4407, tid=16386)
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 18 21:53:59 localhost udev[4412]: removing device node '/dev/vcsa8'
Jan 18 21:53:59 localhost vdr[4310]: starting plugin: analogtv
Jan 18 21:53:59 localhost udev[4417]: creating device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4423]: removing device node '/dev/vcs8'
Jan 18 21:53:59 localhost vdr[4310]: starting plugin: pvr350
Jan 18 21:53:59 localhost vdr[4310]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 18 21:53:59 localhost vdr[4310]: ERROR: /dev/lircd: No such file or directory
Jan 18 21:53:59 localhost vdr[4310]: ERROR: remote control LIRC not ready!
Jan 18 21:53:59 localhost vdr[4310]: remote control KBD - keys known
Jan 18 21:53:59 localhost vdr[4310]: switching to channel 1
Jan 18 21:53:59 localhost vdr[4426]: KBD remote control thread started (pid=4426, tid=32771)
Jan 18 21:53:59 localhost udev[4430]: creating device node '/dev/vcs8'
Jan 18 21:53:59 localhost udev[4436]: removing device node '/dev/vcs8'
Jan 18 21:54:00 localhost udev[4443]: creating device node '/dev/vcs8'
Jan 18 21:54:00 localhost vdr[4310]: setting watchdog timer to 60 seconds
Jan 18 21:54:00 localhost vdr[4440]: transfer thread started (pid=4440, tid=49156)
Jan 18 21:54:00 localhost vdr[4449]: receiver on device 5 thread started (pid=4449, tid=65541)
Jan 18 21:54:00 localhost runvdr: restarting VDR
Jan 18 21:54:00 localhost udev[4455]: creating device node '/dev/vcsa8'
Jan 18 21:54:00 localhost udev[4462]: removing device node '/dev/vcsa8'
Jan 18 21:54:00 localhost udev[4468]: creating device node '/dev/vcsa8'
Jan 18 21:54:00 localhost kernel: saa7146: unregister extension 'dvb'.
Jan 18 21:54:00 localhost udev[4499]: removing device node '/dev/vcs8'
Jan 18 21:54:00 localhost udev[4500]: removing device node '/dev/vcsa8'
Jan 18 21:54:03 localhost kernel: saa7146: register extension 'dvb'.
Jan 18 21:54:18 localhost vdr[4567]: VDR version 1.3.37 started
Jan 18 21:54:18 localhost vdr[4567]: loading plugin: /usr/lib/vdr/plugins/libvdr-analogtv.so.1.3.37
Jan 18 21:54:18 localhost udev[4570]: creating device node '/dev/vcs8'
Jan 18 21:54:18 localhost udev[4571]: creating device node '/dev/vcsa8'
Jan 18 21:54:18 localhost vdr[4567]: loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.37
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/setup.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/sources.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/diseqc.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/channels.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/commands.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/reccmds.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/svdrphosts.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/ca.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/remote.conf
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/keymacros.conf
Jan 18 21:54:18 localhost vdr[4567]: reading EPG data from /var/cache/vdr/epg.data
Jan 18 21:54:18 localhost vdr[4567]: no DVB device found
Jan 18 21:54:18 localhost vdr[4567]: initializing plugin: analogtv (0.9.37): Watch analogue TV
Jan 18 21:54:18 localhost vdr[4567]: initializing plugin: pvr350 (0.0.4pre1): An output device for the PVR350
Jan 18 21:54:18 localhost vdr[4567]: setting primary device to 2
Jan 18 21:54:18 localhost vdr[4567]: SVDRP listening on port 2001
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 18 21:54:18 localhost vdr[4567]: starting plugin: analogtv
Jan 18 21:54:18 localhost vdr[4582]: video directory scanner thread started (pid=4582, tid=16386)
Jan 18 21:54:18 localhost vdr[4582]: video directory scanner thread ended (pid=4582, tid=16386)
Jan 18 21:54:18 localhost vdr[4567]: starting plugin: pvr350
Jan 18 21:54:18 localhost vdr[4567]: loading /var/lib/vdr/themes/sttng-default.theme
Jan 18 21:54:18 localhost vdr[4567]: ERROR: /dev/lircd: No such file or directory
Jan 18 21:54:18 localhost vdr[4567]: ERROR: remote control LIRC not ready!
Jan 18 21:54:18 localhost vdr[4567]: remote control KBD - keys known
Jan 18 21:54:18 localhost vdr[4567]: switching to channel 1
Jan 18 21:54:18 localhost vdr[4584]: KBD remote control thread started (pid=4584, tid=32770)
Jan 18 21:54:18 localhost vdr[4567]: setting watchdog timer to 60 seconds
Jan 18 21:54:18 localhost runvdr: restarting VDR
Jan 18 21:54:18 localhost vdr[4585]: transfer thread started (pid=4585, tid=49155)
Jan 18 21:54:18 localhost vdr[4586]: receiver on device 5 thread started (pid=4586, tid=65540)
Jan 18 21:54:18 localhost udev[4591]: removing device node '/dev/vcs8'

DW73 · 19. Januar 2006

Ok, hab den Durchbruch geschafft:

es fehlte der modprobe ivtv-fb, dann kommt nach einigen Sekunden Bild, Ton, Menü etc...

Aber ich seh schon - jetzt beginnt das Finetuning...Die MPEG-Qualität des reinen TV-Bildes ist recht bescheiden und großgeklotzelt, aber einfach und Plug&Play kann ja jeder...

Bis zum nächsten Thread - Over and Out...

Ypsilon11 · 29. Januar 2006

Hallo dw73,

konntest du dein Problem mit der Endlosschleife mittlerweile lösen? Wenn ja, gib mir doch bitte mal einen Tipp, ich habe das selbe Problem wie du und komm nicht dahinter.

Mein System: Ich habe den c't VDR 4.5 heruntergeladen und installiert. In meinem Rechner steckt eine PVR350. Den ivtv 0.4.2 Treiber sowie das pvr350- und pvrinput-Plugin habe ich installiert. Nach dem Start gelange ich in die gleiche Endlosschleife, die du auch hattest/hast.

Vielleicht helfen ja auch die letzten Zeilen meiner /var/log/messages:

Code

Jan 29 17:56:20 cinematix vdr: [4478] VDR version 1.3.40 started
Jan 29 17:56:20 cinematix vdr: [4478] switched to user 'vdr'
Jan 29 17:56:20 cinematix vdr: [4478] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.3.40
Jan 29 17:56:20 cinematix vdr: [4478] loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.3.40
Jan 29 17:56:20 cinematix vdr: [4478] loading plugin: /usr/lib/vdr/plugins/libvdr-pvrinput.so.1.3.40
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/setup.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/sources.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/diseqc.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/channels.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/commands.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/reccmds.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/svdrphosts.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/remote.conf
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/keymacros.conf
Jan 29 17:56:20 cinematix vdr: [4478] no DVB device found
Jan 29 17:56:20 cinematix vdr: [4478] initializing plugin: femon (0.9.6): DVB Signal Information Monitor (OSD)
Jan 29 17:56:20 cinematix vdr: [4478] initializing plugin: pvr350 (0.0.4pre1): An output device for the PVR350
Jan 29 17:56:20 cinematix vdr: [4478] initializing plugin: pvrinput (0.1.0): use Hauppauge PVR as input device
Jan 29 17:56:20 cinematix vdr: [4478] setting primary device to 1
Jan 29 17:56:20 cinematix vdr: [4478] SVDRP listening on port 2001
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/themes/sttng-default.theme
Jan 29 17:56:20 cinematix vdr: [4478] starting plugin: femon
Jan 29 17:56:20 cinematix vdr: [4478] starting plugin: pvr350
Jan 29 17:56:20 cinematix vdr: [4478] starting plugin: pvrinput
Jan 29 17:56:20 cinematix vdr: [4478] loading /var/lib/vdr/themes/sttng-default.theme
Jan 29 17:56:20 cinematix vdr: [4478] switching to channel 7
Jan 29 17:56:20 cinematix runvdr: restarting VDR
Jan 29 17:56:21 cinematix kernel: saa7146: unregister extension 'dvb'.
Jan 29 17:56:23 cinematix kernel: saa7146: register extension 'dvb'.

Alles anzeigen

Also wenn du oder irgend jemand, der mitliest ne Idee hat? Ich bin um jeden Hinweis dankbar.

Danke schonmal vorab,

Ypsilon11

DW73 · 29. Januar 2006

hi yps,

also bei meinem konkreten problem (ich weiss nicht, ob die schleifen letztendlich die gleichen sind) hat der folgende befehl geholfen (gib den einfach mal so während der schleife von ner anderen konsole aus ein):

modprobe ivtv-fb

bin kein linux-kenner, damit wird wohl einfach irgend ein framebuffer-teil des ivtv als modul in den speicher geladen...
danach ging die schleife weg, das prog lief durch, ich hatte bild und war nen schritt glücklicher.

ok, es ist mir wegen unwissenheit nicht gelungen, diesen befehl dauerhaft einzubinden, hab ihn nach jedem reboot immer manuell neu eingegeben.
wollte diesbezüglich aber nicht großartig weiterrecherchieren, da ich gerade noch in der findungsphase zum "perfekten" htpc bin und mir im rahmen der marktsichtung danach eh erstmal knoppmyth auf den testrechner geschmurgelt hab.

falls dieser befehl aber hilft, wird sicher hier jemand kurz mal schreiben können, wie man ihn fest einbindet, würd mich auch mal interessieren...

slime · 29. Januar 2006

echo ivtv-fb >> /etc/modules

Ypsilon11 · 30. Januar 2006

Hallo,

so langsam komme ich dem Fehler auf die Spur... Wenn du das Problem mit einem ivtv-fb gelöst hast, dann sollte ich das eigentlich auch können. Aber:

Ich bekomme die Meldung, dass es diesen Befehl nicht gibt!

Ergo, hab ich wohl irgendwo was vergessen, auch wenn ich dachte, dass ich den ivtv 0.4.2 ordentlich durchinstalliert habe (Fehlermeldungen gab's jedenfalls kein). Muss da also noch mal schauen, oder kann mir jemand einen Tipp geben, an welcher Stelle der Installation ich was vergessen haben könnte? Danke nochmal für den Tipp,

Gruß Ypsilon11

Ypsilon11 · 31. Januar 2006

Hallo DW73 und alle mitlesenden,

vielen Dank für den Tipp mit ivtv-fb. Nachdem ich noch einmal eine Nacht drüber geschlafen hatte, war mir klar, dass es sich dabei um ein Modul handeln muss. Mit modprob ging das ganze dann auch. Und in /etc/modules eingetragen brauche ich mich darum nun auch nicht mehr kümmern. Jetzt rennt der kleine!

Jetzt muss ich nur noch die Fernbedienung der Hauppage PVR350 zum laufen bekommen. Aber dazu habe ich mich im Forum noch nicht umgeschaut, das kommt jetzt an die Tagesordnung. Prio lag jetzt erst einmal auf einem laufenden VDR!

Danke noch einmal,

Gruß Ypsilon11

Endlosschleife "saa7146: un-/register extension 'DVB'"

Jetzt mitmachen!

Teilen