Gentoo installieren brauch aber INET verbindung?

#*********************************************************************** 
# 
# pppoe.conf 
# 
# Configuration file for rp-pppoe.  Edit as appropriate and install in 
# /etc/ppp/pppoe.conf 
# 
# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and 
#       adsl-status shell scripts.  It is *not* used in any way by the 
#       "pppoe" executable. 
# 
# Copyright (C) 2000 Roaring Penguin Software Inc. 
# 
# This file may be distributed under the terms of the GNU General 
# Public License. 
# 
# LIC: GPL 
# $Id: pppoe.conf,v 1.10 2002/04/09 17:28:38 dfs Exp $ 
#*********************************************************************** 


# When you configure a variable, DO NOT leave spaces around the "=" sign. 


# Ethernet card connected to ADSL modem 
ETH='eth0' 


# ADSL user name.  You may have to supply "@provider.com"  Sympatico 
# users in Canada do need to include "@sympatico.ca" 
# Sympatico uses PAP authentication.  Make sure /etc/ppp/pap-secrets 
# contains the right username/password combination. 
# For Magma, use [EMAIL]xxyyzz@magma.ca[/EMAIL] 
USER='01234567890123456789#0001@t-online.de' 


# Bring link up on demand?  Default is to leave link up all the time. 
# If you want the link to come up on demand, set DEMAND to a number indicating 
# the idle time after which the link is brought down. 
DEMAND=no 
#DEMAND=300 


# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2; 
# NOCHANGE=do not adjust. 
DNSTYPE=SPECIFY 


# Obtain DNS server addresses from the peer (recent versions of pppd only) 
# In old config files, this used to be called USEPEERDNS.  Changed to 
# PEERDNS for better Red Hat compatibility 
PEERDNS=no 


DNS1=
DNS2= 


# Make the PPPoE connection your default route.  Set to 
# DEFAULTROUTE=no if you don't want this. 
DEFAULTROUTE=yes 


### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT 


# How long adsl-start waits for a new PPP interface to appear before 
# concluding something went wrong.  If you use 0, then adsl-start 
# exits immediately with a successful status and does not wait for the 
# link to come up.  Time is in seconds. 
# 
# WARNING WARNING WARNING: 
# 
# If you are using rp-pppoe on a physically-inaccessible host, set 
# CONNECT_TIMEOUT to 0.  This makes SURE that the machine keeps trying 
# to connect forever after adsl-start is called.  Otherwise, it will 
# give out after CONNECT_TIMEOUT seconds and will not attempt to 
# connect again, making it impossible to reach. 
CONNECT_TIMEOUT=30 


# How often in seconds adsl-start polls to check if link is up 
CONNECT_POLL=2 


# Specific desired AC Name 
ACNAME= 


# Specific desired service name 
SERVICENAME= 


# Character to echo at each poll.  Use PING="" if you don't want 
# anything echoed 
PING="." 


# File where the adsl-connect script writes its process-ID. 
# Three files are actually used: 
#   $PIDFILE       contains PID of adsl-connect script 
#   $PIDFILE.pppoe contains PID of pppoe process 
#   $PIDFILE.pppd  contains PID of pppd process 
CF_BASE=`basename $CONFIG` 
PIDFILE="/var/run/$CF_BASE-adsl.pid" 


# Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much 
# easier on CPU usage, but may not work for you.  It is safer to use 
# "no", but you may want to experiment with "yes".  "yes" is generally 
# safe on Linux machines with the n_hdlc line discipline; unsafe on others. 
SYNCHRONOUS=no 


# Do you want to clamp the MSS?  Here's how to decide: 
# - If you have only a SINGLE computer connected to the ADSL modem, choose 
#   "no". 
# - If you have a computer acting as a gateway for a LAN, choose "1412". 
#   The setting of 1412 is safe for either setup, but uses slightly more 
#   CPU power. 
CLAMPMSS=1412 
#CLAMPMSS=no 


# LCP echo interval and failure count. 
LCP_INTERVAL=20 
LCP_FAILURE=3 


# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL 
PPPOE_TIMEOUT=80 


# Firewalling: One of NONE, STANDALONE or MASQUERADE 
FIREWALL=MASQUERADE 


# Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode 
# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so 
LINUX_PLUGIN= 


# Any extra arguments to pass to pppoe.  Normally, use a blank string 
# like this: 
PPPOE_EXTRA="" 


# Rumour has it that "Citizen's Communications" with a 3Com 
# HomeConnect ADSL Modem DualLink requires these extra options: 
# PPPOE_EXTRA="-f 3c12:3c13 -S ISP" 


# Any extra arguments to pass to pppd.  Normally, use a blank string 
# like this: 
PPPD_EXTRA="" 




########## DON'T CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING 
# If you wish to COMPLETELY overrride the pppd invocation: 
# Example: 
# OVERRIDE_PPPD_COMMAND="pppd call dsl" 


# If you want adsl-connect to exit when connection drops: 
# RETRY_ON_FAILURE=no