[vdr] ANNOUNCE: graphlcd-0.1.0

Quote

Original von Hulk
Aus der ML,

Hi list,

here is a new release of the graphlcd plugin. Because of its increased
size I splitted the archive into two: one with the plugin and all needed
files to get it working (vdr-graphlcd-0.1.0.tgz) and another one with
the original font, logo, splash screen files
(vdr-graphlcd-contrib-0.1.0.tgz). You will need the second e.g. if you
want to build your own fonts.

You can get them both here: http://www.powarman.de/vdr_graphlcd.htm

Changes since 0.0.9:
- modified hd61830 driver:
-- fixed bug in partly update
-- modified write method
- replaced sed1330 driver with roland praml's original patch
- modified sed1330 driver:
-- renamed control line names to reflect the controller's
specification a bit more
-- modified WriteCmd and WriteData
- modified sed1330_2 driver (thanks to Heinz Gressenberger and Roland Praml)
-- renamed control line names to reflect the controller's
specification a bit more
-- modified WriteCmd and WriteData
-- added possibility to change oscillator frequency through setup menu
-- added experimental support for 8080 operation mode (undef MODE6800 in
sed1330_2.c to test it)
-- commented out sleep calls, probably not needed any longer (please
test this)
- added framebuffer device driver (thanks to Stephan Skrodzki)
-- README tells you how to use it
- added serdisplib driver (thanks to Wolfgang Astleitner)
-- README.serdisplib tells you how to use it
- fixed a bug in serdisplib driver that caused some flickering
(thanks to Wolfgang Astleitner)
- new GU256x64-372 driver (thanks to Andreas 'randy' Weinberger)
- fixed an error in T6963 driver's partial refresh when using auto mode
- new image driver that writes an image sequence in pbm format to /tmp
- made round rectangle type 4 looking rounder (thanks to Andreas
'randy' Weinberger)
- text item display (programme information) now also contains title
and subtitle
- added up/down scrolling to text item display
-- fixed a bug with long texts in text items (thanks to Andreas Brachold)
- fixed cGraphLCDSetup::CopyFrom: copy of ShowMenu was wrong
- fixed cGraphLCDSetup::CopyFrom: missing ModifiyReplayString
- simplified the display of the replay string
-- more than two lines are possible if they fit on screen
- modified uSleep and nSleep when using wait method 0: now tests if
value is greater than 0 before sleeping at least one microsecond
- added scroller widget, a single scrolling text line
-- extended Text, Char and CharProp of cGraphLCDLib to support this
-- using it for program information (present title and subtitle)
-- scroll speed (time interval and pixel increment) configurable in
setup menu
- fixed DisplayProgramm for small LCD's, no overlapping program
information texts with logo or symbols (thanks to Andreas Brachold)
- fixed german translation of month march (thanks to Andreas Brachold)
- added new, replaced some and deleted some old channel logos
(thanks to Hannes Stein for collecting, sorting and renaming the logos
from Holly, Hulk, Lola, C. Born, himself and providing a new
logonames.alias)
- added a lot of splash screens for 140x32, 128x64 and 240x128 LCD's
(thanks to Hannes Stein)
- included DisplayReplay Patch from Andreas Brachold
-- scrolling ReplayMessage
-- display of a replay-dependent logo (selectable in setup menu, replay
type identification has to be enabled for this)
-- improved display of time bar and indexes according to display size
-- just showing minutes and seconds for replays shorter than one hour
-- simplified DisplayProgramm
- further code revising and cleaning:
-- using STL string instead of char array strings for font and graphlib
functions
- some compilation fixes (thanks to Tobias Grimm)
- the Makefiles now have a proper install target (thanks to Tobias Grimm)
- fixed some memory leaks in logolist.c and some of the drivers
(thanks to Andreas Brachold)
- showpic: now does a clean exit after "kill" (thanks to Andreas Brachold)
- showpic: new command line parameter -t (timing) to select low level
wait method (thanks to Christian Gmeiner)
- fixed possible overlapping of replay string and progress bar with logo
(thanks to Andreas Brachold)
- support for animated logos (thanks to Andreas Brachold)
-- extended plugin, convpic and showpic to support this
-- convpic now can read and write animations in tuxbox-aniplay-format
-- included some new animated replay logos
- now using usleep() instead of low level sleep functions from
drivers/fct.h in display.c (this reduces cpu load when gettimeofday
wait method is used)
- new setup parameter "Identify replay type" that makes replay logos
possible without forced modifying of the replay's text
- revised README a little bit

MfG

Andreas

Display More

Hi Hulk,

ich habe die ctvdr version die mit tobi update läuft. aber dort wird noch graphlcd 0.93 geladen.

habe jetzt grapglcd 0.1.0 von der powerman seite geladen.

ich habe ein 320+240 lcd mit sed1335 und windows belegung, daher brauche ich auch wol den 8080 modus von dem 1.0 release.

habe jetzt heute mehr als 5 stunden gesucht wie man das graphlcd 1.0 installiert und wie ich die einstellungen vornehmen muss, damit mein display funktioniert.

besonders auch WO ich die einstellungen machen muss.

es wäre wirklich sehr nett wenn du mir hier detailliert weiterhelfen könntest. habe alle readmes gelesen, die dabei sind aber damit kommme ich irgendwie nicht allzu weit.

bin zwar seit 12 jahren im windoof umfeld tätig aber linux kenntnisse sind erst seit 3 wochen im aufbau. daher bitte sow wenig dinge als bekannt annehmen wie möglich, sondern die einzelenen schritte beschreiben.

Vielen Dank bereits im voraus.

Wie ich in den zahlreichen threats gesehen habe, ist der sed1335 stark verbreitet, daher sind evtl. noch viele andere auch an einer how-to-do liste interessiert.

Ich habe mir auch den powermate drehschalter gekauft, ein edles teil, das möchte ich dann zur steuerung des lcd einsetzen sobald es dann mal laufen sollte. falls du hier noch auch ausser den readme info noch weitere einstellhilfen hast, wäre auch das super klasse.

gruss daz