Lüfterloses Mainboard für VDR

> Ich habe das Board gerade testweise am Laufen und kann da mal einen Test machen. Was für ein Video soll ich denn nehmen?

Probier mal das hier in 4K.

Ich hab da im Vollbild in intel_gpu_top grob 20% bei Render/3D und 25% bei Video.

top währenddessen ca. je 80% bei firefox und dem Isolated Process.

Hi,

Ich habe mir zum testen das

ASUS Prime N100I-D D4 gekauft.

Meine ersten Schritte von softdevice kommen allerdings nicht weit.

Mit diesem Aufruf bekomme ich ein OSD und auch ein Bild:

"softhddevice -d localhost:0 -v va-api-egl -a hw:0,1 -p hw:0,1 -w no-hw-decoder"

Die CPU Last liegt hier cei ca. 20%

mit diesem Aufruf beendet sich der VDR.

"softhddevice -d localhost:0 -v va-api-egl -a hw:0,1 -p hw:0,1"

syslog wirft das hier:

Nov 26 11:46:52 vdr2 vdr[5749]: [5778] resuming replay at index 1068 (0:00:42.18)

Nov 26 11:46:52 vdr2 vdr[5749]: audio/alsa: using device 'hw:0,1'

Nov 26 11:46:52 vdr2 vdr[5749]: audio/alsa: start delay 128ms

Nov 26 11:46:52 vdr2 vdr[5749]: codec: YUV 420 supported

Nov 26 11:46:52 vdr2 vdr[5749]: codec: YUV 422 supported

Nov 26 11:46:52 vdr2 vdr[5749]: Using entrypoint for vpp: 10

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: can't destroy postproc context!

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: can't destroy config!

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: noise reduction supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: 0,00 - 64,00 ++ 1,00 = 0,00

Nov 26 11:46:52 vdr2 vdr[5749]: Enabling denoise filter (pos = 0)

Nov 26 11:46:52 vdr2 vdr[5749]: Selected deinterlacer for resolution 1 is not supported by HW

Nov 26 11:46:52 vdr2 vdr[5749]: Selected deinterlacer for resolution 3 is not supported by HW

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: deinterlacing supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: bob deinterlace supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: motion adaptive deinterlace supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: motion compensated deinterlace supported

Nov 26 11:46:52 vdr2 vdr[5749]: Enabling Deint (pos = 1)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: sharpening supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: 0,00 - 64,00 ++ 1,00 = 44,00

Nov 26 11:46:52 vdr2 vdr[5749]: Enabling sharpening filter (pos = 0)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: enabling color balance filters

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: Supported color balance filter count: 5

Nov 26 11:46:52 vdr2 vdr[5749]: Hue (-180,00 - 180,00 ++ 0,10 = 0,00) (pos = 2)

Nov 26 11:46:52 vdr2 vdr[5749]: Saturation (0,00 - 10,00 ++ 0,01 = 1,00) (pos = 2)

Nov 26 11:46:52 vdr2 vdr[5749]: Brightness (-100,00 - 100,00 ++ 0,10 = 0,00) (pos = 2)

Nov 26 11:46:52 vdr2 vdr[5749]: Contrast (0,00 - 10,00 ++ 0,01 = 1,00) (pos = 2)

Nov 26 11:46:52 vdr2 vdr[5749]: AutoContrast (0,00 - 0,00 ++ 0,00 = 0,00) (pos = 2)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: skin tone enhancement supported

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: 0,00 - 9,00 ++ 1,00 = 3,00

Nov 26 11:46:52 vdr2 vdr[5749]: Enabling skin tone filter (pos = 3)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: unsupported filter #06

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: unsupported filter #08

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: unsupported filter #09

Nov 26 11:46:52 vdr2 vdr[5749]: Allocating 0 forward reference surfaces for postprocessing

Nov 26 11:46:52 vdr2 vdr[5749]: Allocating 0 backward reference surfaces for postprocessing

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: release surface 0x0000000b, which is not in use

Nov 26 11:46:52 vdr2 vdr[5749]: video: output buffer full, dropping frame (2/5)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: synced after 14 frames

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: release surface 0x0000000d, which is not in use

Nov 26 11:46:52 vdr2 vdr[5749]: video: output buffer full, dropping frame (3/8)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: release surface 0x0000000f, which is not in use

Nov 26 11:46:52 vdr2 vdr[5749]: video: output buffer full, dropping frame (4/11)

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: vaSyncSurface failed

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: release surface 0x00000011, which is not in use

Nov 26 11:46:52 vdr2 vdr[5749]: video/vaapi: out of surfaces

Nov 26 11:46:52 vdr2 root[5748]: Aborted

Nov 26 11:46:52 vdr2 runvdr[5726]: restarting VDR

Eventuell kann mir hier jemand aus der Intel Fraktion einen Tipp geben.

System ist debian bookworm

vdr 2.6.4

softhddevice 2.0.6

Peter

Why -w no-hw-decoder? This disable hw decoder and use software decoder.

vaSyncSurface failed - this is a GLX, but not EGL.

Hi lnj,

The Error vaSyncSurface failed is by parameter -v -va-api-egl not -v va-api-glx.

Here is the complete Log from start to crash:

Nov 26 13:55:30 vdr2 systemd[1]: Started session-1.scope - Session 1 of User vdr.

Nov 26 13:56:44 vdr2 vdr[777]: [777] VDR version 2.6.4 started

Nov 26 13:56:44 vdr2 vdr[777]: [777] switched to user 'vdr'

Nov 26 13:56:44 vdr2 vdr[777]: [777] codeset is 'UTF-8' - known

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading plugin: /vdr/plugins/libvdr-softhddevice.so.2.6.3

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading plugin: /vdr/plugins/libvdr-live.so.2.6.3

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/setup.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/sources.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/diseqc.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/channels.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/timers.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/commands.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/reccmds.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/svdrphosts.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/remote.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/keymacros.conf

Nov 26 13:56:44 vdr2 vdr[777]: [777] no DVB device found

Nov 26 13:56:44 vdr2 vdr[777]: [777] initializing plugin: softhddevice (2.0.6): Ein Software und GPU emuliertes UHD-Gerät

Nov 26 13:56:44 vdr2 vdr[777]: [777] initializing plugin: live (3.3.2): Live Interactive VDR Environment

Nov 26 13:56:44 vdr2 vdr[777]: [777] setting primary device to 1

Nov 26 13:56:44 vdr2 vdr[777]: [777] setting current skin to "sttng"

Nov 26 13:56:44 vdr2 vdr[777]: [777] loading /vdr/etc/themes/sttng-default.theme

Nov 26 13:56:44 vdr2 vdr[777]: [777] starting plugin: softhddevice

Nov 26 13:56:44 vdr2 vdr[777]: audio: 'alsa' output module used

Nov 26 13:56:44 vdr2 vdr[777]: audio/alsa: supports pause: yes

Nov 26 13:56:44 vdr2 vdr[777]: audio: 44100Hz supports 2 2 2 2 2 2 2 2 channels

Nov 26 13:56:44 vdr2 vdr[777]: audio: 48000Hz supports 2 2 2 2 2 2 2 2 channels

Nov 26 13:56:44 vdr2 vdr[777]: audio: 192000Hz supports 2 2 2 2 2 2 2 2 channels

Nov 26 13:56:44 vdr2 root[776]: libEGL warning: DRI3: Screen seems not DRI3 capable

Nov 26 13:56:44 vdr2 root[776]: libEGL warning: failed to get driver name for fd -1

Nov 26 13:56:44 vdr2 root[776]:

Nov 26 13:56:44 vdr2 root[776]: libEGL warning: MESA-LOADER: failed to retrieve device information

Nov 26 13:56:44 vdr2 root[776]:

Nov 26 13:56:44 vdr2 root[776]: libEGL warning: failed to get driver name for fd -1

Nov 26 13:56:44 vdr2 root[776]:

Nov 26 13:56:44 vdr2 vdr[777]: video/vaapi: libva 1.20 (Intel iHD driver for Intel(R) Gen Graphics - 23.3.5 ()) initialized

Nov 26 13:56:44 vdr2 vdr[777]: video/vaapi: background-color is supported

Nov 26 13:56:44 vdr2 vdr[777]: video/vaapi: supports video processing

Nov 26 13:56:44 vdr2 vdr[777]: Selected deinterlacer for resolution 1 is not supported by HW

Nov 26 13:56:44 vdr2 vdr[777]: Selected deinterlacer for resolution 3 is not supported by HW

Nov 26 13:56:44 vdr2 vdr[777]: [softhddev] ready

Nov 26 13:56:44 vdr2 vdr[777]: [777] starting plugin: live

Nov 26 13:56:44 vdr2 vdr[777]: [777] live: initial file cache has 96 entries and needs 438321 bytes of data!

Nov 26 13:56:44 vdr2 vdr[777]: [791] live: INFO: attempt to listen on ip = ''

Nov 26 13:56:44 vdr2 vdr[777]: [791] live: ERROR: Unable to load cert/key (/vdr/etc/plugins/live/live.pem / /vdr/etc/plugins/live/live-key.pem): Datei oder Verzeichnis nicht gefunden

Nov 26 13:56:44 vdr2 vdr[777]: Selected deinterlacer for resolution 1 is not supported by HW

Nov 26 13:56:44 vdr2 vdr[777]: Selected deinterlacer for resolution 3 is not supported by HW

Nov 26 13:56:54 vdr2 vdr[777]: [777] switching to channel 1 S19.2E-1-1019-10301 (Das Erste HD)

Nov 26 13:56:54 vdr2 vdr[777]: [808] SVDRP vdr2 opening port 6419/tcp

Nov 26 13:56:54 vdr2 vdr[777]: [808] SVDRP vdr2 listening on port 6419/tcp

Nov 26 13:56:54 vdr2 vdr[777]: [777] info: Kanal nicht verfügbar!

Nov 26 13:56:57 vdr2 vdr[777]: [777] [softhddev] Copy 123 0 123 not implemented in OpenGl OSD

Nov 26 13:57:00 vdr2 vdr[777]: [796] live: DH: ------ RecordingsTree::RecordingsTree() --------, required time: 0,05468

Nov 26 13:57:05 vdr2 vdr[777]: [777] replay /media/vdrvideo/N24_-_Die_Reportage_XXL/2010-10-29.01.47.13-0.rec

Nov 26 13:57:05 vdr2 vdr[777]: [777] loading /media/vdrvideo/N24_-_Die_Reportage_XXL/2010-10-29.01.47.13-0.rec/marks

Nov 26 13:57:05 vdr2 vdr[777]: audio/alsa: using device 'hw:0,1'

Nov 26 13:57:05 vdr2 vdr[777]: audio/alsa: start delay 128ms

Nov 26 13:57:05 vdr2 vdr[777]: codec: YUV 420 supported

Nov 26 13:57:05 vdr2 vdr[777]: codec: YUV 422 supported

Nov 26 13:57:05 vdr2 vdr[777]: Using entrypoint for vpp: 10

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: can't destroy postproc context!

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: can't destroy config!

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: noise reduction supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: 0,00 - 64,00 ++ 1,00 = 0,00

Nov 26 13:57:05 vdr2 vdr[777]: Enabling denoise filter (pos = 0)

Nov 26 13:57:05 vdr2 vdr[777]: Selected deinterlacer for resolution 1 is not supported by HW

Nov 26 13:57:05 vdr2 vdr[777]: Selected deinterlacer for resolution 3 is not supported by HW

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: deinterlacing supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: bob deinterlace supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: motion adaptive deinterlace supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: motion compensated deinterlace supported

Nov 26 13:57:05 vdr2 vdr[777]: Enabling Deint (pos = 1)

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: sharpening supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: 0,00 - 64,00 ++ 1,00 = 44,00

Nov 26 13:57:05 vdr2 vdr[777]: Enabling sharpening filter (pos = 0)

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: enabling color balance filters

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: Supported color balance filter count: 5

Nov 26 13:57:05 vdr2 vdr[777]: Hue (-180,00 - 180,00 ++ 0,10 = 0,00) (pos = 2)

Nov 26 13:57:05 vdr2 vdr[777]: Saturation (0,00 - 10,00 ++ 0,01 = 1,00) (pos = 2)

Nov 26 13:57:05 vdr2 vdr[777]: Brightness (-100,00 - 100,00 ++ 0,10 = 0,00) (pos = 2)

Nov 26 13:57:05 vdr2 vdr[777]: Contrast (0,00 - 10,00 ++ 0,01 = 1,00) (pos = 2)

Nov 26 13:57:05 vdr2 vdr[777]: AutoContrast (0,00 - 0,00 ++ 0,00 = 0,00) (pos = 2)

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: skin tone enhancement supported

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: 0,00 - 9,00 ++ 1,00 = 3,00

Nov 26 13:57:05 vdr2 vdr[777]: Enabling skin tone filter (pos = 3)

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: unsupported filter #06

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: unsupported filter #08

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: unsupported filter #09

Nov 26 13:57:05 vdr2 vdr[777]: Allocating 0 forward reference surfaces for postprocessing

Nov 26 13:57:05 vdr2 vdr[777]: Allocating 0 backward reference surfaces for postprocessing

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:05 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: release surface 0x0000000b, which is not in use

Nov 26 13:57:06 vdr2 vdr[777]: video: output buffer full, dropping frame (2/5)

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: synced after 14 frames

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: release surface 0x0000000d, which is not in use

Nov 26 13:57:06 vdr2 vdr[777]: video: output buffer full, dropping frame (3/8)

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: release surface 0x0000000f, which is not in use

Nov 26 13:57:06 vdr2 vdr[777]: video: output buffer full, dropping frame (4/11)

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: vaSyncSurface failed

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: release surface 0x00000011, which is not in use

Nov 26 13:57:06 vdr2 vdr[777]: video/vaapi: out of surfaces

Nov 26 13:57:06 vdr2 root[776]: Aborted

libEGL warning: failed to get driver name for fd -1

Try

export LIBVA_DRI3_DISABLE=1

may be

export LIBVA_DRIVER_NAME=i965

pixelpeter

[Bug]: DRI3 implementation lacks vaPutSurface() · Issue #1737 · intel/media-driver

Which component impacted? Not sure Is it regression? Good in old configuration? None What happened? I'm using Linux Mint 21.2 Xfce, which is based on Ubuntu…

github.com

2.17 brakes hardware video decoding in Chromium · Issue #677 · intel/libva

libva 2.17 breaks hw video decode with or without vulkan on Chromium See https://bbs.archlinux.org/viewtopic.php?pid=2080054#p2080054 Accoring to author this…

github.com

Hi,

Nov 26 14:43:42 vdr2 root[2322]: libva info: VA-API version 1.20.0

Nov 26 14:43:42 vdr2 root[2322]: libva info: User environment variable requested driver 'i965'

Nov 26 14:43:42 vdr2 root[2322]: libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so

Nov 26 14:43:42 vdr2 root[2322]: libva info: Found init function __vaDriverInit_1_8

Nov 26 14:43:42 vdr2 root[2322]: libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed

Nov 26 14:43:42 vdr2 root[2322]: libva info: va_openDriver() returns -1

Nov 26 14:43:42 vdr2 vdr[2323]: video/vaapi: Can't inititialize VA-API on 'localhost:0'

Nov 26 14:43:42 vdr2 vdr[2323]: video: 'va-api-egl' output module isn't supported

In xorg.log this error:

Initializing extension GLX

[ 407.011] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i965_dri.so: cannot open shared object file: No such file or directory)

[ 407.011] (EE) AIGLX error: unable to load driver i965

the file i965_dri.so is not in the folder!

root@vdr2:/home/vdr# apt-file search i965_dri.so

root@vdr2:/home/vdr#

Peter

Try export LIBVA_DRI3_DISABLE=1 only.

Geht die neue CPU/GPU überhaupt mit dem i965? Braucht's da nicht den iHD-Treiber?

Was sagt

vainfo

Stefan

Hallo Stefan,

Danke für die Info.

iHD scheint der richtige zu sein.

libva info: VA-API version 1.20.0

libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so

libva info: Found init function __vaDriverInit_1_20

libva info: va_openDriver() returns 0

vainfo: VA-API version: 1.20 (libva 2.12.0)

vainfo: Driver version: Intel iHD driver for Intel(R) Gen Graphics - 23.3.5 ()

vainfo: Supported profile and entrypoints

VAProfileNone : VAEntrypointVideoProc

VAProfileNone : VAEntrypointStats

VAProfileMPEG2Simple : VAEntrypointVLD

VAProfileMPEG2Main : VAEntrypointVLD

VAProfileH264Main : VAEntrypointVLD

VAProfileH264Main : VAEntrypointEncSliceLP

VAProfileH264High : VAEntrypointVLD

VAProfileH264High : VAEntrypointEncSliceLP

VAProfileJPEGBaseline : VAEntrypointVLD

VAProfileJPEGBaseline : VAEntrypointEncPicture

VAProfileH264ConstrainedBaseline: VAEntrypointVLD

VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP

VAProfileVP8Version0_3 : VAEntrypointVLD

VAProfileHEVCMain : VAEntrypointVLD

VAProfileHEVCMain : VAEntrypointEncSliceLP

VAProfileHEVCMain10 : VAEntrypointVLD

VAProfileHEVCMain10 : VAEntrypointEncSliceLP

VAProfileVP9Profile0 : VAEntrypointVLD

VAProfileVP9Profile0 : VAEntrypointEncSliceLP

VAProfileVP9Profile1 : VAEntrypointVLD

VAProfileVP9Profile1 : VAEntrypointEncSliceLP

VAProfileVP9Profile2 : VAEntrypointVLD

VAProfileVP9Profile2 : VAEntrypointEncSliceLP

VAProfileVP9Profile3 : VAEntrypointVLD

VAProfileVP9Profile3 : VAEntrypointEncSliceLP

VAProfileHEVCMain12 : VAEntrypointVLD

VAProfileHEVCMain422_10 : VAEntrypointVLD

VAProfileHEVCMain422_12 : VAEntrypointVLD

VAProfileHEVCMain444 : VAEntrypointVLD

VAProfileHEVCMain444 : VAEntrypointEncSliceLP

VAProfileHEVCMain444_10 : VAEntrypointVLD

VAProfileHEVCMain444_10 : VAEntrypointEncSliceLP

VAProfileHEVCMain444_12 : VAEntrypointVLD

VAProfileHEVCSccMain : VAEntrypointVLD

VAProfileHEVCSccMain : VAEntrypointEncSliceLP

VAProfileHEVCSccMain10 : VAEntrypointVLD

VAProfileHEVCSccMain10 : VAEntrypointEncSliceLP

VAProfileHEVCSccMain444 : VAEntrypointVLD

VAProfileHEVCSccMain444 : VAEntrypointEncSliceLP

VAProfileAV1Profile0 : VAEntrypointVLD

VAProfileHEVCSccMain444_10 : VAEntrypointVLD

VAProfileHEVCSccMain444_10 : VAEntrypointEncSliceLP

Quote from pixelpeter

Hallo Stefan,

Danke für die Info.

iHD scheint der richtige zu sein.

Geht's nun jetzt?

Ulrich Eckhardt Hmm, OK. Das ist ja dann schlechter als bei mir.

Falls das für Dich irgendeine praktische Relevanz hat, müsstest Du mal unter about:support schauen, was da bei HARDWARE_VIDEO_DECODING, HW_DECODED_VIDEO_ZERO_COPY und VP9_HW_DECODE steht.

Hallo rüsseltier,

Ja funktioniert.

Wichtig war auch noch in der xorg den Treiber "modesetting" einzustellen.

Mit "intel" hatte ich kein Erfolg.

Ich überlege meine Uralt Atom mit Nvidia gegen den neuen zu tauschen.

Muss mal sehen wie sich die deinterlacer schlagen.

Peter

Quote from Ulrich Eckhardt

Das steht überall default available. Ist allerdings noch alles Default von Debian. Ich muss mal am Wochenende die Xorg.conf anpassen.

Was evtl. (theoretisch) noch einen Unterschied machen könnte: ich gebe die 4K nur auf FHD aus. Gibst Du auf einem 4K-TV aus?

Quote from Ulrich Eckhardt

Wenn bei mir der 4K-Monitor am HDMI-Port hängt, kommt es nach einiger Zeit zu Bildausfällen. Der Monitor wird kurz schwarz. Je länger das Board läuft, desto häufiger tritt das auf. Am Display-Port tritt das Problem nicht auf. Hast das Problem auch schon mal jemand beobachtet? Ich vermute aber eher einen Defekt auf dem Board.

Entweder das. Oder TV. Oder Kabel (letzteres hatte ich schon mal).