Hallo,
habe meine System upgedatet und nun läuft es nicht mehr.
Es wurde u.a. apt install nvidia-driver-535 nvidia-dkms-535 mit installiert. In Verzweiflung habe ich das Playbook neu laufen lassen.
Am Ende bricht es ab mit:
Code
TASK [yavdr-xorg : start x-verbose@.service] ***********************************************************************************************************************************************************************************
fatal: [localhost]: FAILED! => {
"changed": false
}
MSG:
Unable to start service x-verbose@vt7.service: Job for x-verbose@vt7.service failed because the control process exited with error code.
See "systemctl status x-verbose@vt7.service" and "journalctl -xeu x-verbose@vt7.service" for details.Ausgabe von journalctl -xeu x-verbose@vt7.service
Code
root@vdr1:/home/rossi/yavdr-ansible# journalctl -xeu x-verbose@vt7.service
Jul 01 18:57:52 vdr1 systemd[1]: /etc/systemd/system/x-verbose@.service:12: Ignoring unknown escape sequences: "printf '\0' > /sys/module/drm/parameters/edid_firmware"
Jul 01 18:57:52 vdr1 systemd[1]: /etc/systemd/system/x-verbose@.service:13: Unknown key name 'ExecStartPre-' in section 'Service', ignoring.
Jul 01 18:57:53 vdr1 systemd[1]: /etc/systemd/system/x-verbose@.service:12: Ignoring unknown escape sequences: "printf '\0' > /sys/module/drm/parameters/edid_firmware"
Jul 01 18:57:53 vdr1 systemd[1]: /etc/systemd/system/x-verbose@.service:13: Unknown key name 'ExecStartPre-' in section 'Service', ignoring.
Jul 01 18:57:53 vdr1 systemd[1]: Starting X with verbose logging on vt7...
░░ Subject: A start job for unit x-verbose@vt7.service has begun execution
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ A start job for unit x-verbose@vt7.service has begun execution.
░░
░░ The job identifier is 3100.
Jul 01 18:57:53 vdr1 x-daemon[6413]: X.Org X Server 1.21.1.4
Jul 01 18:57:53 vdr1 x-daemon[6413]: X Protocol Version 11, Revision 0
Jul 01 18:57:53 vdr1 x-daemon[6413]: Current Operating System: Linux vdr1 5.19.0-1010-nvidia-lowlatency #10-Ubuntu SMP PREEMPT_DYNAMIC Wed Apr 26 00:40:27 UTC 2023 x86_64
Jul 01 18:57:53 vdr1 x-daemon[6413]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-1010-nvidia-lowlatency root=UUID=4cc20fc1-1a13-4cb4-b41d-9b8a86942866 ro modprobe.blacklist=mtdpstore quiet splash
Jul 01 18:57:53 vdr1 x-daemon[6413]: xorg-server 2:21.1.4-2ubuntu1.7~22.04.1 (For technical support please see http://www.ubuntu.com/support)
Jul 01 18:57:53 vdr1 x-daemon[6413]: Current version of pixman: 0.40.0
Jul 01 18:57:53 vdr1 x-daemon[6413]: Before reporting problems, check http://wiki.x.org
Jul 01 18:57:53 vdr1 x-daemon[6413]: to make sure that you have the latest version.
Jul 01 18:57:53 vdr1 x-daemon[6413]: Markers: (--) probed, (**) from config file, (==) default setting,
Jul 01 18:57:53 vdr1 x-daemon[6413]: (++) from command line, (!!) notice, (II) informational,
Jul 01 18:57:53 vdr1 x-daemon[6413]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Jul 01 18:57:53 vdr1 x-daemon[6413]: (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 1 18:57:53 2023
Jul 01 18:57:53 vdr1 x-daemon[6413]: (++) Using config file: "/etc/X11/xorg-verbose.conf"
Jul 01 18:57:53 vdr1 x-daemon[6413]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Jul 01 18:57:53 vdr1 x-daemon[6413]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Jul 01 18:57:53 vdr1 x-daemon[6413]: vesa: Refusing to run on UEFI
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE)
Jul 01 18:57:53 vdr1 x-daemon[6413]: Fatal server error:
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE)
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE)
Jul 01 18:57:53 vdr1 x-daemon[6413]: Please consult the The X.Org Foundation support
Jul 01 18:57:53 vdr1 x-daemon[6413]: at http://wiki.x.org
Jul 01 18:57:53 vdr1 x-daemon[6413]: for help.
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE)
Jul 01 18:57:53 vdr1 x-daemon[6413]: (EE) Server terminated with error (1). Closing log file.
Jul 01 18:57:53 vdr1 systemd[1]: x-verbose@vt7.service: Control process exited, code=exited, status=1/FAILURE
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ An ExecStart= process belonging to unit x-verbose@vt7.service has exited.
░░
░░ The process' exit code is 'exited' and its exit status is 1.
Jul 01 18:57:53 vdr1 systemd[1]: x-verbose@vt7.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ The unit x-verbose@vt7.service has entered the 'failed' state with result 'exit-code'.
Jul 01 18:57:53 vdr1 systemd[1]: Failed to start X with verbose logging on vt7.
░░ Subject: A start job for unit x-verbose@vt7.service has failed
░░ Defined-By: systemd
░░ Support: http://www.ubuntu.com/support
░░
░░ A start job for unit x-verbose@vt7.service has finished with a failure.
░░
░░ The job identifier is 3100 and the job result is failed.Im Playbook ist das Ausgabeplugin definiert:
selected_frontend: softhdcuvid
vdr_output_plugin: vdr-plugin-softhdcuvid
Code
root@vdr1:/home/rossi/yavdr-ansible# cat /etc/yavdr/autoinstalled
nvidia-driver-510
linux-modules-nvidia-510-generic
nvidia-driver-535
nvidia-driver-535
nvidia-driver-535
nvidia-driver-535
nvidia-driver-535
nvidia-driver-535
nvidia-driver-535Code
root@vdr1:/home/rossi/yavdr-ansible# dpkg -l nvidia-*|grep ^ii
ii nvidia-dkms-535 535.54.03-0ubuntu0.22.04.1 amd64 NVIDIA DKMS package
ii nvidia-firmware-535-535.54.03 535.54.03-0ubuntu0.22.04.1 amd64 Firmware files used by the kernel module
ii nvidia-kernel-common-535 535.54.03-0ubuntu0.22.04.1 amd64 Shared files used with the kernel module
ii nvidia-kernel-source-535 535.54.03-0ubuntu0.22.04.1 amd64 NVIDIA kernel source packageCode
root@vdr1:/home/rossi/yavdr-ansible# cat /sys/module/nvidia/version
cat: /sys/module/nvidia/version: Datei oder Verzeichnis nicht gefunden
root@vdr1:/home/rossi/yavdr-ansible# cat /proc/driver/nvidia/version
cat: /proc/driver/nvidia/version: Datei oder Verzeichnis nicht gefunden
root@vdr1:/home/rossi/yavdr-ansible# dkms status nvidia
nvidia/535.54.03: addedCode
root@vdr1:/home/rossi/yavdr-ansible# apt policy vdr vdr-plugin-softhdcuvid
vdr:
Installiert: 2.6.4-1yavdr0~jammy
Installationskandidat: 2.6.4-1yavdr0~jammy
Versionstabelle:
*** 2.6.4-1yavdr0~jammy 500
500 http://ppa.launchpad.net/seahawk1986-hotmail/vdr-2.6.4/ubuntu jammy/main amd64 Packages
100 /var/lib/dpkg/status
2.6.0-1 500
500 http://de.archive.ubuntu.com/ubuntu jammy/universe amd64 Packages
vdr-plugin-softhdcuvid:
Installiert: 3.6.27+git20230525-g7f054f8-7f054f8-0yavdr0~jammy
Installationskandidat: 3.6.27+git20230525-g7f054f8-7f054f8-0yavdr0~jammy
Versionstabelle:
*** 3.6.27+git20230525-g7f054f8-7f054f8-0yavdr0~jammy 500
500 http://ppa.launchpad.net/seahawk1986-hotmail/vdr-2.6.4/ubuntu jammy/main amd64 Packages
100 /var/lib/dpkg/statusIch weiss nicht mehr weiter. Wie kann ich die Ausgabe wieder zum laufen bekommen?
Danke