Is it necessary to scan on each tuner separately, for example, all tuners are connected to different dishes, or is there no such possibility and all tuners are structurally connected to one cable?
ja diese Möglichkeit gibt es und auch das DVB-C & DVB-S1/2 Tuner gemischt im NetCeiver verbaut sind
In my case the dish has 2 LNBs for 2 SAT positions (just Astra used right now). 2x2(hor,vrt) cables from LNBs to the SAT-multiswitch. From the multiswitch 6 cables to 3x2 DVB-S2 tuners in one netceiver. (I even heard of people having 2 netceivers).
Each tuner can be assigned to a different SAT position.
Diseq and rotor is also supported.
As cinfo said, one could also mix DVB-C/S/T.
As cinfo said, one could also mix DVB-C/S/T.
Nein da die DVB-T-Karten für den NetCeiver hier Deutschland ohne Funktion sind. DVB-T2 Karten wurden für den NetCeiver nicht mehr hergestellt.
gggggg --> gibt es das "alte" DVB-T noch bei Euch?
Nein, keine DVB-T.
Hier die aktuelle Version aus dem GIT - v1.2.2 zum Testen für MCLI mit DVB-C & DVB-S2
Hi lnj , Thx for the new 1.2.2.
It seems to work, but syslog has those Messages. I did not look into syslog with your last version, so th probs most likely where there as well ...
Prob1
May 27 11:50:44 BM2LTS-MC vdr: [4571] loading /var/lib/vdr/setup.conf
May 27 11:50:44 BM2LTS-MC vdr: [4571] ERROR: unknown config parameter: channelscan.Logfile = 0
May 27 11:50:44 BM2LTS-MC vdr: [4571] ERROR: unknown config parameter: channelscan.ServiceType = 3ServiceType 3 is update PID only
Prob2 Errors and vdr crash
May 27 11:51:07 BM2LTS-MC vdr: [4571] INFO [channelscan]: Please update Transponder lists
May 27 11:51:07 BM2LTS-MC vdr: [4571] INFO [channelscan]: Please update Transponder lists
May 27 11:51:07 BM2LTS-MC vdr: [4571] start Scanning @ Card 0 ---
May 27 11:51:07 BM2LTS-MC vdr: [4640] ERROR: plugin '<no name given>' called cPlugin::ConfigDirectory(), which is not thread safe!
May 27 11:51:07 BM2LTS-MC vdr: [4640] ERROR: [channelscan] can`t open LoadSatTpls /var/lib/vdr/plugins/transponders/S19.2E.tpl.bz2 --- try uncompressed
May 27 11:51:07 BM2LTS-MC vdr: [4641] mcli::handle_ten: m_chan.Name='' m_chan.Number=0: Signal lost
May 27 11:51:08 BM2LTS-MC vdr: [4641] mcli::handle_ten: m_chan.Name='' m_chan.Number=0: Status:01 Strength:0xe180 SNR:0x0000 BER:0x0000
May 27 11:51:16 BM2LTS-MC vdr: [4642] mcli::handle_ten: m_chan.Name='' m_chan.Number=0: Signal lost
May 27 11:51:17 BM2LTS-MC vdr: [4642] mcli::handle_ten: m_chan.Name='' m_chan.Number=0: Status:01 Strength:0xe600 SNR:0x0000 BER:0x0000
May 27 11:51:20 BM2LTS-MC vdr: [4615] VNSI: Requesting clients to reload channels list
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing pids of channel 553 (M+ LaLigaTV 2) from 0+0=0:0:0:0 to 166+5166=2:104=esl@4,105=eng@4,106=tre@4,107=und@4,140=@4,141=@4:0:0
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing caids of channel 553 (M+ LaLigaTV 2) from 0 to 100,1810
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing pids of channel 554 (M+LCampeones BAR) from 0+0=0:0:0:0 to 4000+5400=2:4001=esl@4,4002=eng@4:0:0
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing caids of channel 554 (M+LCampeones BAR) from 0 to 1810
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing pids of channel 556 (MULTIDEPORTE) from 0+0=0:0:0:0 to 172+5172=2:82=esl@4,83=ch2@4,128=ch3@4,129=ch4@4,130=ch5@4,131=ch6@4,133=ch7@4,134=ch8@4,137=ch9@4,138=ch1@4:0:0
May 27 11:51:23 BM2LTS-MC vdr: [4582] changing caids of channel 556 (MULTIDEPORTE) from 0 to 100,1810
May 27 11:51:25 BM2LTS-MC vdr: [4615] VNSI: Requesting clients to reload channels list
May 27 11:51:29 BM2LTS-MC vdr: [4582] New transponder n 0 f: 11214 p: H sr: 23500 (mod_si: 2 mod: 9, ro 1 )
May 27 11:51:29 BM2LTS-MC vdr: [4582] New transponder n 0 f: 11229 p: V sr: 22000 (mod_si: 2 mod: 9, ro 1 ) please find syslog attached
INFO [channelscan]: Please update Transponder lists
Diese Plugin Version hast Du noch in der alten BM2LTS Version getestet?
Hm, die Listen sind eigentlich im neuen Image aktualisiert
ERROR: [channelscan] can`t open LoadSatTpls /var/lib/vdr/plugins/transponders/S19.2E.tpl.bz2
ist auch da --> hast Du was bei Dir geändert? Wenn ich mir das hier so anschaue gibt es diese Datei überhaupt nicht da alle entpackt sind.
This is a normal.
ERROR: [channelscan] can`t open LoadSatTpls /var/lib/vdr/plugins/transponders/S19.2E.tpl.bz2 --- try uncompressed ERROR: unknown config parameter: channelscan.Logfile = 0
ERROR: unknown config parameter: channelscan.ServiceType = 3Logfile and ServiceType not saved in config file now, hence the error.
ServiceType is service type of channel (tv, radio, fta, hdtv).
Please update Transponder listsNow it's always on autoscan.
ERROR: plugin '<no name given>' called cPlugin::ConfigDirectory(), which is not thread safe!Weird i don't have it...
Magick: abort due to signal 11 (SIGSEGV) "Segmentation Fault"...If it crashes all the time, i need a crash dump.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!