Softhddevice - Mal wieder kein Bild nach Update

msv · Jan 6th 2023

Hallo Leute,

ich hab mal wieder Probleme mit softhddevice (Version: 1.9.7-GITf99260b). VDR ist 2.6.3.

Es kommt mal wieder kein Bild. Vorausgegangen sind einige Aptitude Updates meines Debian Sid Desktops. Da ich nicht immer den VDR auf meinem Desktop anhabe ist mir leider "durchgerutscht" nach welchem Update es nicht mehr ging. Aber es muß in den letzten 3-4 Tagen passiert sein.

Hier sind die Schritte beim Start aus dem Log:

Initialisieren des Plugins:

Display Spoiler

Start der Wiedergabe:

Display Spoiler

Jan 06 13:41:21 mannitec02 vdr[920186]: audio/alsa: using device 'pulse'

Jan 06 13:41:21 mannitec02 vdr[920186]: audio/alsa: start delay 339ms

Jan 06 13:41:22 mannitec02 vdr[920186]: codec: YUV 420 supported

Jan 06 13:41:22 mannitec02 vdr[920186]: Using entrypoint for vpp: 10

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: vaPutSurface failed -1

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: can't destroy postproc context!

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: can't destroy config!

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: noise reduction supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50

Jan 06 13:41:22 mannitec02 vdr[920186]: Enabling denoise filter (pos = 0)

Jan 06 13:41:22 mannitec02 vdr[920186]: Selected deinterlacer for resolution 0 is not supported by HW

Jan 06 13:41:22 mannitec02 vdr[920186]: Selected deinterlacer for resolution 1 is not supported by HW

Jan 06 13:41:22 mannitec02 vdr[920186]: Selected deinterlacer for resolution 2 is not supported by HW

Jan 06 13:41:22 mannitec02 vdr[920186]: Selected deinterlacer for resolution 3 is not supported by HW

Jan 06 13:41:22 mannitec02 vdr[920186]: Selected deinterlacer for resolution 4 is not supported by HW

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: deinterlacing supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: bob deinterlace supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: motion adaptive deinterlace supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: motion compensated deinterlace supported

Jan 06 13:41:22 mannitec02 vdr[920186]: Enabling Deint (pos = 1)

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: sharpening supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: 0,00 - 1,00 ++ 0,03 = 0,50

Jan 06 13:41:22 mannitec02 vdr[920186]: Enabling sharpening filter (pos = 0)

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: enabling color balance filters

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: Supported color balance filter count: 4

Jan 06 13:41:22 mannitec02 vdr[920186]: Hue (-180,00 - 180,00 ++ 1,00 = 0,00) (pos = 2)

Jan 06 13:41:22 mannitec02 vdr[920186]: Saturation (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)

Jan 06 13:41:22 mannitec02 vdr[920186]: Brightness (-100,00 - 100,00 ++ 1,00 = 0,00) (pos = 2)

Jan 06 13:41:22 mannitec02 vdr[920186]: Contrast (0,00 - 10,00 ++ 0,10 = 1,00) (pos = 2)

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: skin tone enhancement supported

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: 0,00 - 4,00 ++ 1,00 = 0,00

Jan 06 13:41:22 mannitec02 vdr[920186]: Enabling skin tone filter (pos = 3)

Jan 06 13:41:22 mannitec02 vdr[920186]: Allocating 1 forward reference surfaces for postprocessing

Jan 06 13:41:22 mannitec02 vdr[920186]: Allocating 0 backward reference surfaces for postprocessing

Jan 06 13:41:22 mannitec02 vdr[920186]: Surface 0 query status = 0x6: invalid VASurfaceID

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: vaPutSurface failed: unknown libva error

Jan 06 13:41:22 mannitec02 vdr[920186]: epg2vdr: Handler: Init handler instance for thread 920193

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: vaPutSurface failed: unknown libva error

Jan 06 13:41:22 mannitec02 vdr[920186]: Changing to 0 forward reference surfaces for postprocessing

Jan 06 13:41:22 mannitec02 vdr[920186]: video/vaapi: vaPutSurface failed: unknown libva error

Hier noch die vainfo:

Display Spoiler

Wo haakts denn diesmal? Kann da jemand bitte helfen?

Gruß

msv

lnj · Jan 6th 2023

Try the previous version of the softhddevice, of course, but I think this is not the problem.

Looks like the i965 driver has been updated.

You can try to roll back the driver, or install a softhddevice from the test branch, with -v va-api-egl.

Look this.

msv · Jan 6th 2023

The i965 Driver was updated last time in July 2020. So this could not be the cause.

But I checked out now your test branch with -v va-api-egl.

And that works. Picture is back.

THANK YOU

greets

msv

Softhddevice - Mal wieder kein Bild nach Update

Participate now!

Share

Similar Threads

easyVDR5-unstable SoftHDDevice 1.2.8 & NVidia Treiber 390

Tags

Users Viewing This Thread