Problem mit Streamdev-Server und Streamdev-Client

  • Hallo Community,


    ich brauche eure Hilfe !



    Ich nutze nun schon seit mehr als 10 Jahren ein Client-Server-VDR-System mit einem Server und 3 Clients, welches bisher einwandfrei und unauffällig gelaufen ist. Seit einiger Zeit funktioniert das Streaming vom Server zu den Clients nicht mehr.


    Setup Server:

    Linux-Server mit 3 HD-SAT-Karten, VDR 2.0.6 und Streamdev-Server 0.6.1 (sowie weiteren Plugins); Server hat keine Berechtigung zum Internet, seit 10 Jahren keine Updates


    Setup Clients:

    Raspberry Pi mit VDR 2.0.6 und Streamdev-Client 0.6.1 (sowie weiteren Plugins); yaVDR 0.4 auf Barebones mit Streamdev-Client (und weiteren Plugins).


    Aktuelles Verhalten:

    Eine Verbindung über Streamdev ist nicht möglich. Eine Verbindung zum Server mittels RemoteOSD, RemoteTimers funktioniert, ebenso das Abspielen von Aufzeichnungen, welche am Server liegen. Gleiches Verhalten auf allen Clients.


    Was steht in den Logfiles wenn am Client ein Kanal umgeschaltet wird:

    Clientlog:

    Aug 27 16:10:01 cube-1 vdr: [1280] switching to channel 3
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Connected to server 172.16.0.21:2004 using capabilities TSPIDS,FILTERS,PRIO
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Pid 101 not available from 172.16.0.21:2004
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Pid 102 not available from 172.16.0.21:2004
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Pid 103 not available from 172.16.0.21:2004
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Pid 106 not available from 172.16.0.21:2004
    Aug 27 16:10:02 cube-1 vdr: [1617] osdteletext-receiver thread ended (pid=1280, tid=1617)
    Aug 27 16:10:02 cube-1 vdr: [1280] Streamdev: Pid 104 not available from 172.16.0.21:2004
    Aug 27 16:10:02 cube-1 vdr: [1280] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:02 cube-1 vdr: [1280] cStreamdevDevice::OpenFilter: connect failed: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:02 cube-1 vdr: [1280] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    ...
    Aug 27 16:10:04 cube-1 vdr: [1280] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:04 cube-1 vdr: [1280] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 27 16:10:04 cube-1 vdr: [1280] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:04 cube-1 vdr: [1280] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED

    ...

    Aug 27 16:10:04 cube-1 vdr: [1882] receiver on device 24 thread started (pid=1280, tid=1882)
    Aug 27 16:10:04 cube-1 vdr: [1280] buffer stats: 0 (0%) used
    Aug 27 16:10:04 cube-1 vdr: [1280] creating directory /var/run/vdr/vtx/S19.2E-1-1101-28107
    Aug 27 16:10:05 cube-1 vdr: [1882] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:05 cube-1 vdr: [1882] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 27 16:10:05 cube-1 vdr: [1882] receiver on device 24 thread ended (pid=1280, tid=1882)
    Aug 27 16:10:05 cube-1 vdr: [1280] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:05 cube-1 vdr: [1280] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 27 16:10:05 cube-1 vdr: [1883] osdteletext-receiver thread started (pid=1280, tid=1883)
    Aug 27 16:10:05 cube-1 vdr: [1884] receiver on device 24 thread started (pid=1280, tid=1884)
    Aug 27 16:10:05 cube-1 vdr: [1881] Text2Skin: menu display update thread ended (pid=1280, tid=1881)
    Aug 27 16:10:05 cube-1 vdr: [1884] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 27 16:10:05 cube-1 vdr: [1884] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 27 16:10:05 cube-1 vdr: [1884] receiver on device 24 thread ended (pid=1280, tid=1884)

    Serverlog:

    Aug 27 16:10:02 hp vdr: [3725] Streamdev: Accepted new client (VTP) 172.16.0.121:35744

    Aug 27 16:10:02 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:34733

    Aug 27 16:10:02 hp vdr: [4114] streamdev-writer thread started (pid=3655, tid=4114, prio=high)

    Aug 27 16:10:02 hp vdr: [4115] streamdev-filterstreaming thread started (pid=3655, tid=4115, prio=high)

    Aug 27 16:10:02 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:48268

    Aug 27 16:10:02 hp vdr: [4115] streamdev-filterstreaming thread ended (pid=3655, tid=4115)

    Aug 27 16:10:02 hp vdr: [4114] streamdev-writer thread ended (pid=3655, tid=4114)

    Aug 27 16:10:02 hp vdr: [4116] streamdev-writer thread started (pid=3655, tid=4116, prio=high)

    Aug 27 16:10:02 hp vdr: [4117] streamdev-filterstreaming thread started (pid=3655, tid=4117, prio=high)

    Aug 27 16:10:02 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:44025

    Aug 27 16:10:03 hp vdr: [4117] streamdev-filterstreaming thread ended (pid=3655, tid=4117)

    Aug 27 16:10:03 hp vdr: [4116] streamdev-writer thread ended (pid=3655, tid=4116)

    Aug 27 16:10:03 hp vdr: [4118] streamdev-writer thread started (pid=3655, tid=4118, prio=high)

    Aug 27 16:10:03 hp vdr: [4119] streamdev-filterstreaming thread started (pid=3655, tid=4119, prio=high)

    Aug 27 16:10:03 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:41469

    Aug 27 16:10:04 hp vdr: [4119] streamdev-filterstreaming thread ended (pid=3655, tid=4119)

    Aug 27 16:10:04 hp vdr: [4118] streamdev-writer thread ended (pid=3655, tid=4118)

    Aug 27 16:10:04 hp vdr: [4120] streamdev-writer thread started (pid=3655, tid=4120, prio=high)

    Aug 27 16:10:04 hp vdr: [4121] streamdev-filterstreaming thread started (pid=3655, tid=4121, prio=high)

    Aug 27 16:10:04 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:51066

    Aug 27 16:10:04 hp vdr: [4122] streamdev-writer thread started (pid=3655, tid=4122, prio=high)

    Aug 27 16:10:04 hp vdr: [4123] streamdev-livestreaming thread started (pid=3655, tid=4123, prio=high)

    Aug 27 16:10:04 hp vdr: [4124] receiver on device 1 thread started (pid=3655, tid=4124, prio=high)

    Aug 27 16:10:04 hp vdr: [4125] TS buffer on device 1 thread started (pid=3655, tid=4125, prio=high)

    Aug 27 16:10:04 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:53890

    Aug 27 16:10:04 hp vdr: [4123] streamdev-livestreaming thread ended (pid=3655, tid=4123)

    Aug 27 16:10:04 hp vdr: [4125] TS buffer on device 1 thread ended (pid=3655, tid=4125)

    ...

    Aug 27 16:10:04 hp vdr: [4132] receiver on device 1 thread ended (pid=3655, tid=4132)

    Aug 27 16:10:04 hp vdr: [4130] streamdev-writer thread ended (pid=3655, tid=4130)

    Aug 27 16:10:04 hp vdr: [4134] streamdev-writer thread started (pid=3655, tid=4134, prio=high)

    Aug 27 16:10:04 hp vdr: [4136] receiver on device 1 thread started (pid=3655, tid=4136, prio=high)

    Aug 27 16:10:04 hp vdr: [4135] streamdev-livestreaming thread started (pid=3655, tid=4135, prio=high)

    Aug 27 16:10:04 hp vdr: [4137] TS buffer on device 1 thread started (pid=3655, tid=4137, prio=high)

    Aug 27 16:10:04 hp vdr: [3725] Streamdev: Setting data connection to 172.16.0.121:52664

    Aug 27 16:10:04 hp vdr: [4135] streamdev-livestreaming thread ended (pid=3655, tid=4135)

    Aug 27 16:10:05 hp vdr: [4137] TS buffer on device 1 thread ended (pid=3655, tid=4137)

    Aug 27 16:10:05 hp vdr: [4134] streamdev-writer thread ended (pid=3655, tid=4134)

    Aug 27 16:10:05 hp vdr: [4136] buffer stats: 0 (0%) used

    ...

    Aug 27 16:10:05 hp vdr: [4144] receiver on device 1 thread ended (pid=3655, tid=4144)

    Aug 27 16:10:05 hp vdr: [4142] streamdev-writer thread ended (pid=3655, tid=4142)

    Aug 27 16:10:05 hp vdr: [4146] streamdev-writer thread started (pid=3655, tid=4146, prio=high)

    Aug 27 16:10:05 hp vdr: [4148] receiver on device 1 thread started (pid=3655, tid=4148, prio=high)

    Aug 27 16:10:05 hp vdr: [4147] streamdev-livestreaming thread started (pid=3655, tid=4147, prio=high)

    Aug 27 16:10:05 hp vdr: [4149] TS buffer on device 1 thread started (pid=3655, tid=4149, prio=high)

    Aug 27 16:10:05 hp vdr: [4146] ERROR: streamdev-server: couldn't send 74636 bytes: Connection reset by peer

    Aug 27 16:10:05 hp vdr: [4146] streamdev-writer thread ended (pid=3655, tid=4146)

    Aug 27 16:10:05 hp vdr: [3725] streamdev-server: closing VTP connection to 172.16.0.121:35744

    Aug 27 16:10:05 hp vdr: [4147] streamdev-livestreaming thread ended (pid=3655, tid=4147)

    Aug 27 16:10:05 hp vdr: [3725] buffer stats: 72944 (1%) used

    Aug 27 16:10:05 hp vdr: [4149] TS buffer on device 1 thread ended (pid=3655, tid=4149)

    Aug 27 16:10:05 hp vdr: [4148] buffer stats: 92496 (2%) used

    Aug 27 16:10:05 hp vdr: [4148] receiver on device 1 thread ended (pid=3655, tid=4148)


    Hat jemand von euch ne Idee ?


    Grüße

    Mane

    Serverknecht: HP Pavilion mit Core2Duo, 2x 2TB Raid1, 3x Skystar 2HD auf OpenSuSE 12.1, VDR 2.0.6
    Client 1&2: Giada Cube N3 mit Intel(R) Atom(TM) CPU 330 @ 1.60GHz und nVidia Corporation ION VGA (rev b1) über HDMI @ Full-HD auf yaVDR 0.4
    Client 3: Raspberry Pi Modell B, Raspbian, VDR 2.0.6, rpihddevice über HDMI @ Full-HD, IR am GPIO

  • Evtl. hat sich die channels.conf auf dem Server geändert.


    vdr-User-# 755 to_h264 chk_r vdr-transcode github

  • Hallo jsffm,


    habe zur Sicherheit die channels.conf vom Server auf einen Client kopiert, leider das gleiche Verhalten.


    Grüße

    Mane

    Serverknecht: HP Pavilion mit Core2Duo, 2x 2TB Raid1, 3x Skystar 2HD auf OpenSuSE 12.1, VDR 2.0.6
    Client 1&2: Giada Cube N3 mit Intel(R) Atom(TM) CPU 330 @ 1.60GHz und nVidia Corporation ION VGA (rev b1) über HDMI @ Full-HD auf yaVDR 0.4
    Client 3: Raspberry Pi Modell B, Raspbian, VDR 2.0.6, rpihddevice über HDMI @ Full-HD, IR am GPIO

  • Empfangsprobleme? Eventuell mal eine kurze Aufnahme auf dem Server machen und schauen ob was aufgenommen wurde (Dateigröße). Wenn das geklappt hat den aufgenommenen Sender auf dem Client wählen - der sollte ja gehen.

  • Hallo maxzapper,


    ne, kann ich ausschließen.

    Ich kann über den Client über remoteosd in das Servermenü, eine Aufnahme programmieren, den Timer auch vom Client aus wieder editieren und die Aufnahme anschauen.

    Ausserdem funktioniert Streaming über z.B. vlc über Port 3000 ohne Probleme.


    Grüße

    Mane

    Serverknecht: HP Pavilion mit Core2Duo, 2x 2TB Raid1, 3x Skystar 2HD auf OpenSuSE 12.1, VDR 2.0.6
    Client 1&2: Giada Cube N3 mit Intel(R) Atom(TM) CPU 330 @ 1.60GHz und nVidia Corporation ION VGA (rev b1) über HDMI @ Full-HD auf yaVDR 0.4
    Client 3: Raspberry Pi Modell B, Raspbian, VDR 2.0.6, rpihddevice über HDMI @ Full-HD, IR am GPIO

  • Hallo machtnix,


    auf dem Client ? Die Datei ist das letzte Mal am 31.08.2011 editiert:


    Der Vollständigkeit auch noch die vom Server (das letzte Mal am 12.06.2011 editiert):


    Grüße

    Mane

    Serverknecht: HP Pavilion mit Core2Duo, 2x 2TB Raid1, 3x Skystar 2HD auf OpenSuSE 12.1, VDR 2.0.6
    Client 1&2: Giada Cube N3 mit Intel(R) Atom(TM) CPU 330 @ 1.60GHz und nVidia Corporation ION VGA (rev b1) über HDMI @ Full-HD auf yaVDR 0.4
    Client 3: Raspberry Pi Modell B, Raspbian, VDR 2.0.6, rpihddevice über HDMI @ Full-HD, IR am GPIO

  • Hallo machtnix,


    am Client kann ichs zwar nicht nachvollziehen, aber ich habs am Client und am Server entsprechend geändert und beide VDR-Instanzen neu gestartet - leider das selbe Fehlerbild.



    Was ich nicht verstehe wenn ich mir die Logs wieder anschaue, der Client baut ne Verbindung auf und diese wird vom Server akzeptiert (cube-1 ist der Client, hp der Server):


    Aug 30 20:20:18 cube-1 vdr: [1994] Streamdev: Connected to server 172.16.0.21:2004 using capabilities TSPIDS,FILTERS,PRIO

    Aug 30 20:20:18 cube-1 vdr: [1994] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 30 20:20:18 cube-1 vdr: [1994] cStreamdevDevice::OpenFilter: connect failed: Die Ressource ist zur Zeit nicht verfügbar
    Aug 30 20:20:18 cube-1 vdr: [1994] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 30 20:20:18 cube-1 vdr: [1994] cStreamdevDevice::OpenFilter: connect failed: Die Ressource ist zur Zeit nicht verfügbar

    Aug 30 20:20:18 hp vdr: [4970] Streamdev: Accepted new client (VTP) 172.16.0.121:41628

    Aug 30 20:20:18 hp vdr: [4970] Streamdev: Setting data connection to 172.16.0.121:37537

    Aug 30 20:20:18 hp vdr: [4974] streamdev-writer thread started (pid=4954, tid=4974, prio=high)

    Aug 30 20:20:18 hp vdr: [4975] streamdev-filterstreaming thread started (pid=4954, tid=4975, prio=high)

    Aug 30 20:20:18 hp vdr: [4970] Streamdev: Setting data connection to 172.16.0.121:46058

    Aug 30 20:20:18 hp vdr: [4975] streamdev-filterstreaming thread ended (pid=4954, tid=4975)

    Aug 30 20:20:18 hp vdr: [4974] streamdev-writer thread ended (pid=4954, tid=4974)

    Aug 30 20:20:18 hp vdr: [4976] streamdev-writer thread started (pid=4954, tid=4976, prio=high)

    Aug 30 20:20:18 hp vdr: [4977] streamdev-filterstreaming thread started (pid=4954, tid=4977, prio=high)


    dann geht das Spiel 3 Sekunden weiter und endet in der letzten Sekunde mit:



    Aug 30 20:20:21 cube-1 vdr: [1994] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 30 20:20:21 cube-1 vdr: [1994] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 30 20:20:21 cube-1 vdr: [2129] receiver on device 24 thread started (pid=1994, tid=2129)
    Aug 30 20:20:21 cube-1 vdr: [2129] ERROR: Streamdev: Couldn't establish data connection to 172.16.0.21:2004: Die Ressource ist zur Zeit nicht verfügbar
    Aug 30 20:20:21 cube-1 vdr: [2129] cStreamdevDevice::OpenDvrInt(): DVR connection FAILED
    Aug 30 20:20:21 cube-1 vdr: [2129] receiver on device 24 thread ended (pid=1994, tid=2129)

    Aug 30 20:20:21 hp vdr: [4998] streamdev-writer thread ended (pid=4954, tid=4998)

    Aug 30 20:20:21 hp vdr: [5002] streamdev-writer thread started (pid=4954, tid=5002, prio=high)

    Aug 30 20:20:21 hp vdr: [5004] receiver on device 1 thread started (pid=4954, tid=5004, prio=high)

    Aug 30 20:20:21 hp vdr: [5003] streamdev-livestreaming thread started (pid=4954, tid=5003, prio=high)

    Aug 30 20:20:21 hp vdr: [5005] TS buffer on device 1 thread started (pid=4954, tid=5005, prio=high)

    Aug 30 20:20:21 hp vdr: [4970] Streamdev: Setting data connection to 172.16.0.121:51020

    Aug 30 20:20:21 hp vdr: [5003] streamdev-livestreaming thread ended (pid=4954, tid=5003)

    Aug 30 20:20:21 hp vdr: [5005] TS buffer on device 1 thread ended (pid=4954, tid=5005)

    Aug 30 20:20:21 hp vdr: [5004] buffer stats: 564 (0%) used

    Aug 30 20:20:21 hp vdr: [5004] receiver on device 1 thread ended (pid=4954, tid=5004)

    Aug 30 20:20:21 hp vdr: [5002] streamdev-writer thread ended (pid=4954, tid=5002)

    Aug 30 20:20:21 hp vdr: [5006] streamdev-writer thread started (pid=4954, tid=5006, prio=high)

    Aug 30 20:20:21 hp vdr: [5007] streamdev-livestreaming thread started (pid=4954, tid=5007, prio=high)

    Aug 30 20:20:21 hp vdr: [5008] receiver on device 1 thread started (pid=4954, tid=5008, prio=high)

    Aug 30 20:20:21 hp vdr: [5009] TS buffer on device 1 thread started (pid=4954, tid=5009, prio=high)

    Aug 30 20:20:21 hp vdr: [5006] ERROR: streamdev-server: couldn't send 69748 bytes: Connection reset by peer

    Aug 30 20:20:21 hp vdr: [5006] streamdev-writer thread ended (pid=4954, tid=5006)

    Aug 30 20:20:21 hp vdr: [4970] streamdev-server: closing VTP connection to 172.16.0.121:41628

    Aug 30 20:20:21 hp vdr: [5009] TS buffer on device 1 thread ended (pid=4954, tid=5009)

    Aug 30 20:20:21 hp vdr: [5007] streamdev-livestreaming thread ended (pid=4954, tid=5007)

    Aug 30 20:20:21 hp vdr: [4970] buffer stats: 76328 (2%) used

    Aug 30 20:20:21 hp vdr: [5008] buffer stats: 78960 (1%) used

    Aug 30 20:20:21 hp vdr: [5008] receiver on device 1 thread ended (pid=4954, tid=5008)

    Aug 30 20:20:22 hp vdr: [4981] streamdev-filterstreaming thread ended (pid=4954, tid=4981)

    Aug 30 20:20:22 hp vdr: [4980] streamdev-writer thread ended (pid=4954, tid=4980)


    Ich hab keinen Schimmer was da los ist.


    Grüße

    Manfred

    Serverknecht: HP Pavilion mit Core2Duo, 2x 2TB Raid1, 3x Skystar 2HD auf OpenSuSE 12.1, VDR 2.0.6
    Client 1&2: Giada Cube N3 mit Intel(R) Atom(TM) CPU 330 @ 1.60GHz und nVidia Corporation ION VGA (rev b1) über HDMI @ Full-HD auf yaVDR 0.4
    Client 3: Raspberry Pi Modell B, Raspbian, VDR 2.0.6, rpihddevice über HDMI @ Full-HD, IR am GPIO

  • Hallo mane77 , das ist wie bei mir!

    Ich habe noch streamdev-client Probleme

    offen.

    Hat sich bei Dir eine Lösung ergeben?


    Hat irgendeiner in den letzten Jahren überhaupt noch einmal streamdev neu aufgesetzt und das funktioniert?

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!