epg2vdr übernimmt Daten nicht

  • Hallo,


    nachdem epgdata den Dienst einstellt, habe ich mein epgd auf tvsp umgestellt. Der epgd läuft auf einem NAS-Server, der VDR-Server (yavdr) und der VDR-Client (mld5.5.) holen sich die Daten beim epgd ab. Das lief bis gestern auch ganz ok. Seit gestern zeigt der VDR-Server aber kein EPG mehr an, sprich die Daten werden vom epgd-Server nicht übernommen. In der epg.data steht für jeden Sender nur noch:


    Code
    220 HD-VDR SVDRP VideoDiskRecorder 2.4.0; Fri Mar  8 09:39:49 2222; UTF-8
    215-C S19.2E-1-1101-28106 Das Erste
    215-c
    215-C S19.2E-1-1101-28113 SWR Fernsehen BW
    215-c


    Eine Fehlermeldung kann ich im Log des VDR-Servers nicht finden. Der VDR-Client zeigt das EPG an.

    Auf dem VDR-Server ist epg2vdr v1.1.118-GIT installiert.


    Hat jemand einen TIPP, was ich tun kann?


    VG

    Joerg

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • was sagt " epgd-showmerge" ?

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • Das liefert epgd-showmerge


    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • gestern 15:51 zuletzt gemerged, da stimmt was mit den DVB events die vom vdr kommen nicht - wieviele Sender hast du in der channels.conf?


    schick mal bitte "epgd-showmerge S19.2E-1-1019-10301" zB für astra "Das Erste HD" (wenn der betroffen ist)

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • In der channels.conf sind 51 Kanäle eingetragen

    "epgd-showmerge S19.2E-1-1019-10301" zeigt

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • das sieht doch so schlecht nicht aus.


    Mal geschaut ob du in den Plugin einstellungen des vdr Plugin epg2vdr das richtige Netzwerkgerät eingestellt hast?

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • Erst einmal vielen Dank für deine Hilfe!


    Da der Fehler "über Nacht" aufgetreten ist und ich an den Einstellungen nichts geändert hatte, scheidet dies als Ursache m.E. aus.

    Ich hatte in meiner Verzweiflung das Plugin mal deinstalliert und wieder installiert. Hat aber nix gebracht.


    Die Einträge für das Plugin sind alle korrekt, sprich DBHost, DB, User, Passwort stimmen. Wenn das nicht stimmen würde, hätte ich auch eine Fehlermeldung im Log erwartet. Aber da sehe ich gar nichts.

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • ich meine das NetDevice , das kam mit einer späteren Version dazu - da hab ich mir auch schon mal die Finger wund gesucht.


    Code
    epg2vdr.NetDevice = eno1


    so richtig viel kann das ja nicht sein wenn die Daten auf dem Server da sind und der epgd aktiv ist.

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • epg2vdr.NetDevice ist in der setup.conf nicht enthalten.

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • dann setze es mal über die Einstellungen im Pluginmenu

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • Das hat keine Änderung gebracht.

    Was mir gerade aufgefallen ist, ist folgende Meldung im Log:


    Code
    epg2vdr: Info: Last update was at '28.01.86 13:06:32'


    Dies ist gestern gegen 19:38 das erst Mal aufgetreten. In älteren Logs steht da immer ein aktuelleres Datum, wie "04.03.22", oder "06.03.22".

    Woher nimmt denn epg2vdr diese Info?

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • Irgendetwas ist wohl gestern sehr falsch gelaufen. Im Log finde ich nun das:


    Code
    Mar  7 19:34:48 HD-VDR vdr: epg2vdr: Updated changes since '06.03.2022 22:19:54'; 50 channels, 10463 events (34 deletions) in 11.336 seconds
    Mar  7 19:35:01 HD-VDR vdr: epg2vdr: Updated changes since '06.03.2022 22:19:54'; 50 channels, 10463 events (0 deletions) in 8.570 seconds
    Mar  7 19:40:07 HD-VDR vdr: epg2vdr: Updated changes since '07.03.2222 19:35:01'; 1 channels, 0 events (0 deletions) in 509 ms
    Mar  7 19:40:47 HD-VDR vdr: epg2vdr: Updated changes since '07.03.2222 19:35:01'; 50 channels, 14179 events (0 deletions) in 14.661 seconds


    Da steht dann plötzlich als Datum der 07.03.2222. Könnte das die Ursache sein?

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • ja sicher, das wäre schon fatal. Müssen wir mal überlegen wir man das wieder glatt gezogen kriegt.


    Zuerst wäre es mal wichtig auf welchem Rechner das Problem entstanden ist und die Ursache nachhaltig abzustellen

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



  • Bin einen Schritt weiter: das Problem liegt wohl daran, dass das Datum auf dem VDR-Server nicht richtig war. Da war als Jahr plötzlich auf 2222 gestanden. Tag, Monat und Uhrzeit waren korrekt. Darum ist mir das auch nicht sofort aufgefallen.

    Ich habe das Datum auf dem Rechner nun korrekt gesetzt und nun werden zumindest schon mal wieder einige EPG-Daten übernommen. Vermutlich braucht das Update jetzt noch etwas Zeit, bis alle Einträge übernommen wurden.


    Hm, muss ich mal beobachten, woran das lag.

    Server: yavdr-ansible (Ubuntu 18.04) Silverstone LC11, AT3IONT-I, 2GB DDR2, TT S2-6400, Riser RC11, SSD ADATA 120GB, Samsung 1TB
    Client: MLD5.4 Shuttle XS35GTV2, SSD OCZ 60GB, FB Medion X10

  • Naja, wenn in der DB als letztes Aktualisierungsdatum 2222 steht, ist wohl ein epgd-dropall usw. fällig, denk ich mal.

    Bios-Batterie vom VDR-Server kontrolliert?

  • Nein mach kein dropall, ich sag dir dann was weg muss wenn es soweit ist und du es so nicht hinkriegst.


    Bios-Batterie vom VDR-Server ist natürlich ein Versuch wert.

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



    Einmal editiert, zuletzt von CKone ()

  • ich würde diese hier droppen wenn es hart auf hart kommt.

    Code
    drop table analyse;
    drop table events;
    drop table fileref;
    drop table imagerefs;
    drop table images;
    drop table snapshot;
    drop table useevents;


    wenn dann noch Bedarf ist auch die beiden Tabellen:

    Code
    drop table vdrs;
    drop table timers;

    in denen falsche Daten stehen können.


    Danach muss die epg.data auf den server/client vdrs weg damit nichts durcheinander geht.

    CKone: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G540, 2x 2GB Kingston DDR3, Zotac GT630 1GB, S2-1600, Ocz Agility 3 60GB, LG GH24NS DVD, 15.6" Selbstbau TFT, Harmony 665, CIR Selbstbau - das Ganze im Silverstone SST-SG03B
    CKtwo: yavdr-ansible/18.04 LTS/2.4.1/kodi18 auf Intel DH67BL, Intel Celeron G1610, 2x 2GB Corsair DDR3, Zotac GT630 1GB, TT S2-1600, Ocz Vertex 2 50 GB, 92 Kanal Seduatmo, Harmony 665, atric USB
    CKthree: yavdr-ansible/22.04 LTS/2.6.1/kodi19.3 auf Intel NUC, Celeron J4005, UHD Graphics 600, 4GB Crucial DDR4, Ocz Vertex2 50 GB, Harmony 350

    PowerEdge: Ubuntu Server 16.04 LTS / VDR 2.4.1 auf Dell PowerEdge T20, Xeon E3-1225 v3, 16GB ECC DDR3, 2x Cine S2 V6 mit Duoflex, Samsung 840 EVO 120GB, 3x WD White WD80EZAZ 8TB in SW Raid5



Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!