Moin zusammen,
ich wollte mal mit yavdr ansible an einem UC10I3FNHN2 mit 120GB SSD und 16GB RAM testen. Als Inputdevice läuft eine DVB-C SAT-IP Fritzbox und eine RC6 Fernbedienung zum Steuern.
Nach dem Austausch von softhddevice nach softhdvaapi hatte ich auch ein gutes, wenn auch helles Bild.
Nun wollte ich den normalen Fernsehton über HDMI am TV (LG 43") testen.
Das Problem, ich höre nix... Pulseaudio findet nur ein Dummy Device.
Nachfolgend meine Konfiguiration und die nicht erfolgreichen Änderungen:
Code
uname -r
5.4.0-100-generic
lspci -nnk | grep -A2 Audio
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:02c8]
Subsystem: Intel Corporation Device [8086:2081]
Kernel driver in use: snd_hda_intel
lspci -vv
00:1f.3 Audio device: Intel Corporation Device 02c8
Subsystem: Intel Corporation Device 2081
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 156
Region 0: Memory at 4022110000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at 4022000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci
Änderungen:
/etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=generic
/etc/modprobe.d/blacklist.conf
blacklist snd_soc_skl
dmesg | grep snd
[ 3.686791] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.720355] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 3.720357] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.720358] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.720359] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0
[ 3.720360] snd_hda_codec_generic hdaudioC0D2: inputs:
--> Weiterhin nur das Dumma Device
-.----
/etc/modprobe.d/alsa-base.conf
options snd-hda-intel dmic_detect=0
Auch nur Dummy Device...
----
Neuester Kernel :
linux-image-5.13.0-30-generic
linux-headers-5.13.0-30-generic
Xorg startet nicht und andere Fehler...
---
Alles anzeigen
Das aktuelle Libreelec 10.0.1 findet die Soundkarte ebenfalls nicht...
Kennt jemand von euch das Problem bei Ubuntu20 und der internen NUC Soundkarte und könnte helfen?
Danke und Gruß