[ANNOUNCE] VDR Version 2.6.0 und 2.4.8 freigegeben

kls · Dec 29th 2021

Der Einfachheit halber hier die Freigabemitteilung aus der ML:

Code

VDR version 2.6.0 is now available at the official VDR GIT archive

      git://git.tvdr.de

You can get the latest stable version with

      git clone --branch stable/2.6 git://git.tvdr.de/vdr.git

If you want to download the source as a tar archive, use

      http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.6.0;sf=tbz2

A summary of all the major changes since the last stable version can be found at

      http://www.tvdr.de/changelog.htm

There is also a new version with important fixes in the stable/2.4 branch, for
those who don't want to or can't switch to version 2.6 at this time:

      http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.4.8;sf=tbz2

When updating from an earlier version of VDR please make sure you read the INSTALL
and MANUAL files that come with the VDR source _before_ doing so!
Please make sure you have backup copies of all your configuration files,
and verify carefully that your timers will be set to the correct channels
after switching to this new version.

Thanks to the many people who have contributed in the making, testing and
debugging of this new version of VDR, and also to all users who just
enjoy VDR!

Please also visit the VDR homepage at

     http://www.tvdr.de

and VDR's facebook page at

     https://www.facebook.com/VideoDiskRecorder

Have fun!

Klaus

Display More

jsffm · Dec 29th 2021

läuft auf meinem Testsystem

highrgb · Dec 29th 2021

Klaus, herzlichen Dank!

Code

Dec 29 15:14:54 vdr4 vdr[22779]: [22779] VDR version 2.6.0 started
Dec 29 15:14:54 vdr4 vdr[22779]: [22779] codeset is 'UTF-8' - known

Gruss

marco · Dec 29th 2021

Danke für die beiden Versionen, schaffe es leider mal nicht die Tags herunter laden (vdr-2.4.8.tar.bz2) oder gibt es da keine.

Code

wget http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.4.8;sf=tbz2

marco · Dec 29th 2021

Quote from marco
Danke für die beiden Versionen, schaffe es leider mal nicht die Tags herunter laden (vdr-2.4.8.tar.bz2) oder gibt es da keine.
Code
wget http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.4.8;sf=tbz2

ok, über die beiden Links kommt man dran.

Code

http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.6.0;sf=tbz2
http://git.tvdr.de/?p=vdr.git;a=snapshot;h=refs/tags/2.4.8;sf=tbz2

kls · Dec 29th 2021

marco Bei wget musst du den URL in Hochkommas setzen, weil er Semikolons enthält.

wirbel · Jan 5th 2022

In der manpage vdr.5 fehlen einige 'AUTO' Werte für die channels.

Code

vdr.5:94
\fBB\fR@Bandwidth (1712, 5, 6, 7, 8, 10)
--\fBC\fR@Code rate high priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910)
--\fBD\fR@coDe rate low priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910)
--\fBG\fR@Guard interval (4, 8, 16, 32, 128, 19128, 19256)
++\fBC\fR@Code rate high priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910, 999)
++\fBD\fR@coDe rate low priority (0, 12, 23, 34, 35, 45, 56, 67, 78, 89, 910, 999)
++\fBG\fR@Guard interval (4, 8, 16, 32, 128, 19128, 19256, 999)
\fBH\fR@Horizontal polarization
--\fBI\fR@Inversion (0, 1)
++\fBI\fR@Inversion (0, 1, 999)
\fBL\fR@Left circular polarization
\fBM\fR@Modulation (2, 5, 6, 7, 10, 11, 12, 16, 32, 64, 128, 256, 999)
\fBN\fR@pilot mode (0, 1, 999)
\fBO\fR@rollOff (0, 20, 25, 35)
\fBP\fR@stream id (0-255)
\fBQ\fR@t2 system id (0-65535)
\fBR\fR@Right circular polarization
\fBS\fR@delivery System (0, 1)
--\fBT\fR@Transmission mode (1, 2, 4, 8, 16, 32)
++\fBT\fR@Transmission mode (1, 2, 4, 8, 16, 32, 999)
\fBV\fR@Vertical polarization
\fBX\fR@siso/miso mode (0, 1)
--\fBY\fR@hierarchY (0, 1, 2, 4)
++\fBY\fR@hierarchY (0, 1, 2, 4, 999)
.TE

Display More

[ANNOUNCE] VDR Version 2.6.0 und 2.4.8 freigegeben

Participate now!

Share