[gelöst] mcli ERROR: video data stream broken

gggggg · Jan 31st 2021

Hallo, um nicht den mcli Fork Thread weiter zu "missbrauchen" sammle ich hier die Infos:

16:37:01 BM2LTSNuc64native-MCLI vdr: [3068] ERROR: video data stream broken

Fakt ist, dass er immer nur ca. 30-120s nach Aufnahmestart auftritt. (markad habe ich disabled).

Im .ts1 stoppt der VLC jedes Mal nach 20s.

Quote from HelmutB

Die Ursache ist, dass in 00001.ts ab dann die TS-Pakete verschlüsselt sind (es sind insgesamt 206762 TS-Pakete, ab Paket #83140 nur mehr verschlüsselt).

Das ERROR: video data stream broken kommt aus recorder.c wenn 30 Sekunden kein I-Frame erkannt wurde. Also muß ab ca. 17:38:20 irgend ein Ereignis die Entschlüsselung verhindern. Im Post 452 ist allerdings kein brauchbarer Hinweis zu finden.

Lg helmut

Die von Helmut analysierte Aufnahme liegt hier.

Auch in unten angeführtem Fall stockt der 00001.ts nach ca 20s.

Code

Jan 30 16:36:00 BM2LTSNuc64native-MCLI vdr: [1567] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] timer 1 (2 1636-1638 'Religionen der Welt') start
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] Title: 'Land und Leute' Subtitle: ''
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] executing '/media/hd/recordings before "/media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec"'
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr[3067]: sh: 1: /media/hd/recordings: Permission denied
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] record /media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] creating directory /media/hd/recordings/Religionen_der_Welt
Jan 30 16:36:01 BM2LTSNuc64native-MCLI vdr: [1567] creating directory /media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec
Jan 30 16:36:04 BM2LTSNuc64native-MCLI vdr: [1567] recording to '/media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec/00001.ts'
Jan 30 16:36:04 BM2LTSNuc64native-MCLI vdr: [3068] recording thread started (pid=1567, tid=3068, prio=high)
Jan 30 16:36:04 BM2LTSNuc64native-MCLI vdr: [3069] device 2 receiver thread started (pid=1567, tid=3069, prio=high)
Jan 30 16:36:04 BM2LTSNuc64native-MCLI vdr: [1567] writing timer id '1@10.75.25.22' to /media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec/.timer
Jan 30 16:36:04 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:36:05 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload recordings list
Jan 30 16:36:05 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:36:06 BM2LTSNuc64native-MCLI vdr[1567]: Mcli::recv_ts_func: Discontinuity on receiver 0x56531ae15a60 for pid 3000: 8->7 at pos 0/7
Jan 30 16:36:07 BM2LTSNuc64native-MCLI vdr: [3068] executing '/media/hd/recordings started "/media/hd/recordings/Religionen_der_Welt/2021-01-30.16.36.2-0.rec"'
Jan 30 16:36:07 BM2LTSNuc64native-MCLI vdr[3071]: sh: 1: /media/hd/recordings: Permission denied
Jan 30 16:36:07 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload recordings list
Jan 30 16:36:10 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Griechenland_von_Insel_zu_Insel_(3~5)/2021-01-29.05.27.36-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Griechenland_von_Insel_zu_Insel_(2~5)/2021-01-29.04.43.36-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Griechenland_von_Insel_zu_Insel_(1~5)/2021-01-29.04.00.36-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Tannbach_-_Schicksal_eines_Dorfes_(3)/2021-01-29.00.07.2-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Auf_schmaler_Spur_durch_Indien_(3)/2021-01-28.21.00.28-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Der_Bergdoktor/2021-01-28.20.25.5-0.rec/marks
Jan 30 16:36:11 BM2LTSNuc64native-MCLI vdr: [1600] loading /media/hd/recordings/Die_Bestatterin_-_Die_unbekannte_Tote/2021-01-28.20.25.4-0.rec/marks
Jan 30 16:36:15 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:36:30 BM2LTSNuc64native-MCLI vdr: message repeated 2 times: [ [1619] VNSI: Requesting clients to reload timers]
Jan 30 16:36:32 BM2LTSNuc64native-MCLI vdr[1567]: Mcli::recv_ts_func: Discontinuity on receiver 0x56531adc5a40 for pid 767: 2->11 at pos 0/7
Jan 30 16:36:35 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:36:55 BM2LTSNuc64native-MCLI vdr: message repeated 4 times: [ [1619] VNSI: Requesting clients to reload timers]
Jan 30 16:36:59 BM2LTSNuc64native-MCLI vdr: [1567] [softhddev]CreateOsd: left 96, top 54, level 0, using OpenGL OSD support
Jan 30 16:36:59 BM2LTSNuc64native-MCLI vdr: [1567] [softhddev]cOglOsd osdLeft 96 osdTop 54 screenWidth 1920 screenHeight 1080
Jan 30 16:37:00 BM2LTSNuc64native-MCLI vdr: [1619] VNSI: Requesting clients to reload timers
Jan 30 16:37:01 BM2LTSNuc64native-MCLI vdr: [3068] ERROR: video data stream broken
Jan 30 16:37:01 BM2LTSNuc64native-MCLI vdr: [3068] initiating emergency exit

Display More

Ich hätte in /etc/security/limits.conf do eingestellt:

Code

*            hard    core            100000
*            soft    core            100000

und ulimit -c bestätigt das auch. Leider wird kein File gespeichert ...

Quote from pbrb

"initiating emergency exit" -> VDR ist noch "heile" genug, daß er sich selbst sauber beendet...da wird's keinen coredump geben - läuft vdr auf loglevel "3" (debug)....wenn immer noch nichts zu finden und es halbwegs schnell nach Start passiert -> als user "vdr" "bash -x runvdr" - sich die finale VDR-Kommandozeile rauspicken und das dann unter strace -o /tmp/vdr-strace.txt -f -s 1024 "vdr ....all..die...optionen" starten und Problem nachstellen. Das ganze kann man mit ltrace wiederholen....und dann mal strace.txt und ltrace.txt Dateien durchschauen, ob man irgendeinen Hinweis findet.

btw. möglicherweise wäre des der Ordnung halber besser, für dieses Problem einen neuen Thread anzufangen pro problematischer Plugin-Kombination...

gggggg · Jan 31st 2021

ich habe ohne Erfolg versucht in /opt/vdr/conf.d/vdr.conf den loglevel zu setzten

Code

# This file contains the arguments for VDR if invoked without arguments on the
# command line.
#
# See `man vdr`.
#

[vdr]
--record=/media/hd/recordings
--video=/media/hd/recordings
--user=root
--grab=/tmp
--port=2001
--watchdog=0
--lirc=/var/run/lirc/lircd
--shutdown=/usr/sbin/power
--log=3

Display More

1 wie prüfe ich ob der loglevel auf 3 ist ?

2 kann man auch bei mcli den loglevel erhöhen ?

kfb77 · Jan 31st 2021

Quote from gggggg

wie prüfe ich ob der loglevel auf 3 ist ?

vdr --showargs

gggggg · Jan 31st 2021

Code

--record=/media/hd/recordings
--video=/media/hd/recordings
--user=root
--grab=/tmp
--port=2001
--watchdog=0
--lirc=/var/run/lirc/lircd
--shutdown=/usr/sbin/power
--log=3
--plugin=mcli --ifname eth0.2 --dvb-s2 3 --mld-reporter-disable --sock-path /tmp/mcli.socket
--plugin=bgprocess
--plugin=channelscan
--plugin=epgsearch
--plugin=femon
--plugin=live --port=8008 --ip=10.75.25.22 --epgimages=/var/cache/vdr/
--plugin=osd2web -p 4444 -l /usr/share/reel/channellogos -s png -e /var/cache/vdr
--plugin=sc
--plugin=softhddrm -f -d :0.0 -a hdmi  # oder sowas wie hw:card=HDMI,device=7 - das hängt von der eigenen Hardare ab -p hdmi -c PCM -g 1920x1080+0+0 -C HDMI-A-1 -r 50
--plugin=streamdev-server
--plugin=systeminfo
--plugin=tvguideng -l /usr/share/reel/channellogos/ -e /var/cache/vdr/ -i /etc/vdr/plugins/tvguide/icons/
--plugin=vnsiserver
--plugin=dummydevice

Display More

gggggg · Jan 31st 2021

ich vermute level 3 bringt uns nicht weiter oder ?

Code

Jan 31 12:02:55 BM2LTSNuc64native-MCLI vdr: [1452] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 12:02:55 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload channels list
Jan 31 12:02:55 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] timer 1 (2 1203-1205 'Hohes Haus') start
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] Title: 'Hohes Haus' Subtitle: ''
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] executing '/media/hd/recordings before "/media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec"'
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr[1670]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] record /media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr: [1452] creating directory /media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec
Jan 31 12:03:00 BM2LTSNuc64native-MCLI vdr[1452]: Mcli::recv_ts_func: Discontinuity on receiver 0x5565ed872ec0 for pid 18: 1->5 at pos 0/7
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1452] recording to '/media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec/00001.ts'
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1452] writing timer id '1@10.75.25.22' to /media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec/.timer
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1672] device 2 receiver thread started (pid=1452, tid=1672, prio=high)
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1671] recording thread started (pid=1452, tid=1671, prio=high)
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:04 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload recordings list
Jan 31 12:03:08 BM2LTSNuc64native-MCLI vdr: [1671] executing '/media/hd/recordings started "/media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec"'
Jan 31 12:03:08 BM2LTSNuc64native-MCLI vdr[1674]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 12:03:09 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:09 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload recordings list
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Eine_Sommerreise_durch_den_Altai_(3~9)/2021-01-31.07.55.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Eine_Sommerreise_durch_den_Altai_(2~9)/2021-01-31.07.15.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Eine_Sommerreise_durch_den_Altai_(1~9)/2021-01-31.06.30.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Die_Farben_Marokkos/2021-01-31.03.00.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Die_Farben_Marokkos/2021-01-31.02.30.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Die_Farben_Marokkos/2021-01-31.02.05.37-0.rec/marks
Jan 31 12:03:12 BM2LTSNuc64native-MCLI vdr: [1471] loading /media/hd/recordings/Donna_Leon_-_Wie_durch_ein_dunkles_Glas/2021-01-30.23.50.4-0.rec/marks
Jan 31 12:03:14 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:29 BM2LTSNuc64native-MCLI vdr: message repeated 3 times: [ [1490] VNSI: Requesting clients to reload timers]
Jan 31 12:03:33 BM2LTSNuc64native-MCLI vdr[1452]: Mcli::recv_ts_func: Discontinuity on receiver 0x5565ed823140 for pid 767: 12->11 at pos 0/7
Jan 31 12:03:34 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:03:59 BM2LTSNuc64native-MCLI vdr: message repeated 5 times: [ [1490] VNSI: Requesting clients to reload timers]
Jan 31 12:04:02 BM2LTSNuc64native-MCLI vdr: [1671] ERROR: video data stream broken
Jan 31 12:04:02 BM2LTSNuc64native-MCLI vdr: [1671] initiating emergency exit
Jan 31 12:04:03 BM2LTSNuc64native-MCLI vdr: [1452] emergency exit requested - shutting down
Jan 31 12:04:04 BM2LTSNuc64native-MCLI vdr: [1490] VNSI: Requesting clients to reload timers
Jan 31 12:04:04 BM2LTSNuc64native-MCLI vdr: [1620] SVDRP client handler thread ended (pid=1452, tid=1620)
Jan 31 12:04:04 BM2LTSNuc64native-MCLI vdr: [1619] SVDRP server handler thread ended (pid=1452, tid=1619)
Jan 31 12:04:04 BM2LTSNuc64native-MCLI vdr: [1452] saving /var/cache/vdr/cam.data
Jan 31 12:04:05 BM2LTSNuc64native-MCLI vdr: [1671] recording thread ended (pid=1452, tid=1671)
Jan 31 12:04:05 BM2LTSNuc64native-MCLI vdr: [1672] device 2 receiver thread ended (pid=1452, tid=1672)
Jan 31 12:04:06 BM2LTSNuc64native-MCLI vdr: [1452] buffer stats: 3967364 (18%) used
Jan 31 12:04:06 BM2LTSNuc64native-MCLI vdr: [1452] timer 1 (2 1203-1205 'Hohes Haus') stop
Jan 31 12:04:06 BM2LTSNuc64native-MCLI vdr: [1452] removing /media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec/.timer
Jan 31 12:04:06 BM2LTSNuc64native-MCLI vdr: [1452] executing '/media/hd/recordings after "/media/hd/recordings/Hohes_Haus/2021-01-31.12.03.2-0.rec"'

Display More

gggggg · Jan 31st 2021

pbrb kfb77 könnt ihr mir bitte behilflich sein, wie der Aufruf aussehen muss !

Quote

als user "vdr" "bash -x runvdr" - sich die finale VDR-Kommandozeile rauspicken und das dann unter strace -o /tmp/vdr-strace.txt -f -s 1024 "vdr ....all..die...optionen" starten und Problem nachstellen. Das ganze kann man mit ltrace wiederholen....und dann mal strace.txt und ltrace.txt Dateien durchschauen, ob man irgendeinen Hinweis findet.

Code

root@BM2LTSNuc64native-MCLI:~# su vdr
vdr@BM2LTSNuc64native-MCLI:/root$ bash -x runvdr
bash: runvdr: Keine Berechtigung
vdr@BM2LTSNuc64native-MCLI:/root$ sudo bash -x runvdr
[sudo] Passwort für vdr:
Das hat nicht funktioniert, bitte nochmal probieren.
[sudo] Passwort für vdr:

cinfo · Jan 31st 2021

liegt das Problem nicht beim mounten von /media/hd/recordings (1671)

Hm, 1 Platte vergößert oder 2 Platten in fstab, denn diesen Fehler gibt hier mit dem MCLI nicht.

Code

# NVme /dev/sda3
UUID=3458e42a-e819-4fd5-b6aa-1bc9631963d7    /media/hd    auto    defaults,nofail    0    2
# Recordings WD1TB /dev/sda4
UUID=cccf41fe-06bb-4bc6-b368-f684335ad3dd    /media/hd/recordings    auto    defaults,nofail    0    2

cinfo

gggggg · Jan 31st 2021

Soeben mit der nvme partition getestet:

Code

# Recordings /dev/sda3
#NVme
UUID=3458e42a-e819-4fd5-b6aa-1bc9631963d7    /media/hd    auto    defaults,nofail    0    2

Code

Jan 31 12:35:32 BM2LTSNuc64native-MCLI vdr: [1624] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 12:35:35 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:35:50 BM2LTSNuc64native-MCLI vdr: message repeated 3 times: [ [1758] VNSI: Requesting clients to reload timers]
Jan 31 12:35:54 BM2LTSNuc64native-MCLI vdr: [1624] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 12:35:55 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload channels list
Jan 31 12:35:55 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] timer 1 (2 1236-1238 'Orientierung') start
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] Title: 'Orientierung' Subtitle: ''
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] executing '/media/hd/recordings before "/media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec"'
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr[3364]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] record /media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] creating directory /media/hd/recordings/Orientierung
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] creating directory /media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] recording to '/media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec/00001.ts'
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [3365] recording thread started (pid=1624, tid=3365, prio=high)
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1624] writing timer id '1@10.75.25.22' to /media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec/.timer
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [3366] device 2 receiver thread started (pid=1624, tid=3366, prio=high)
Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:36:02 BM2LTSNuc64native-MCLI vdr[1624]: Mcli::recv_ts_func: Discontinuity on receiver 0x55659a73c520 for pid 3000: 15->14 at pos 0/7
Jan 31 12:36:02 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload recordings list
Jan 31 12:36:04 BM2LTSNuc64native-MCLI vdr: [3365] executing '/media/hd/recordings started "/media/hd/recordings/Orientierung/2021-01-31.12.36.2-0.rec"'
Jan 31 12:36:04 BM2LTSNuc64native-MCLI vdr[3373]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 12:36:05 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload recordings list
Jan 31 12:36:05 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:36:30 BM2LTSNuc64native-MCLI vdr: message repeated 5 times: [ [1758] VNSI: Requesting clients to reload timers]
Jan 31 12:36:31 BM2LTSNuc64native-MCLI vdr[1624]: Mcli::recv_ts_func: Discontinuity on receiver 0x55659a73c520 for pid 3000: 3->10 at pos 0/7
Jan 31 12:36:35 BM2LTSNuc64native-MCLI vdr: [1758] VNSI: Requesting clients to reload timers
Jan 31 12:36:55 BM2LTSNuc64native-MCLI vdr: message repeated 4 times: [ [1758] VNSI: Requesting clients to reload timers]
Jan 31 12:36:59 BM2LTSNuc64native-MCLI vdr: [3365] ERROR: video data stream broken
Jan 31 12:36:59 BM2LTSNuc64native-MCLI vdr: [3365] initiating emergency exit

Display More

cinfo ich teste es immer auf einem verschlüsselten Kanal (ORF2HD). Auch den

Jan 31 12:36:00 BM2LTSNuc64native-MCLI vdr[3364]: sh: 1: /media/hd/recordings: Permission denied

bekomme ich nicht weg

gggggg · Jan 31st 2021

es laufen auch nur mehr folgende Plugins:

Code

--record=/media/hd/recordings
--video=/media/hd/recordings
--user=root
--grab=/tmp
--port=2001
--watchdog=0
--lirc=/var/run/lirc/lircd
--shutdown=/usr/sbin/power
--log=3
--plugin=mcli --ifname eth0.2 --dvb-s2 3 --mld-reporter-disable --sock-path /tmp/mcli.socket
--plugin=bgprocess
--plugin=channelscan
--plugin=femon
--plugin=sc
--plugin=softhddrm -f -d :0.0 -a hdmi  # oder sowas wie hw:card=HDMI,device=7 - das hängt von der eigenen Hardare ab -p hdmi -c PCM -g 1920x1080+0+0 -C HDMI-A-1 -r 50
--plugin=systeminfo
--plugin=tvguideng -l /usr/share/reel/channellogos/ -e /var/cache/vdr/ -i /etc/vdr/plugins/tvguide/icons/
--plugin=vnsiserver
--plugin=dummydevice

Display More

HelmutB · Jan 31st 2021

Quote from gggggg

es laufen auch nur mehr folgende Plugins

Für einen reinen Aufnahmetest sollten doch mcli und softhddrm genügen, oder?

Dabei sollte vorläufig auch nur dein NUC auf den Netceiver zugreifen, keine weiteren Clients.

Helmut

gggggg · Jan 31st 2021

Quote from HelmutB

Für einen reinen Aufnahmetest sollten doch mcli und softhddrm genügen, oder?

Dabei sollte vorläufig auch nur dein NUC auf den Netceiver zugreifen, keine weiteren Clients.

Helmut

Hallo Helmut, danke dass du "vorbei schaust". (bei de bisherigen Tests lief immer nur der NUC, alerdings hat er nur 3 dr 6 Tuner bekommen).

Wenn du sagst ich kann alle deaktivieren ... mach ich das ... oder meinst du beim Aufruf des vdr aus der bash ? den ich nicht alleine gebacken bekomme (s.o.)

gggggg · Jan 31st 2021

Gestern Abend hatte ich 2 Aufnahmen parallel programmiert.

die 1. auf ORFHD brachte es auf 82 .ts1 und die 2. auf ZDF auf eine mit 0 Bytes. Erst als ZDF geendet hatte lief der ORFHD durch. Sonst hatte er minütlich den Stream broken exit ...

Code

20:10:37 vdr: [1456] executing '/media/hd/recordings before "/media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec"'
20:10:37 vdr[1710]: sh: 1: /media/hd/recordings: Permission denied
20:10:37 vdr: [1456] record /media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec
20:10:37 vdr: [1456] creating directory /media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache
20:10:38 vdr: [1456] creating directory /media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec
20:10:40 vdr: [1456] recording to '/media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec/00001.ts'
20:10:40 vdr: [1456] markad: cStatusMarkAd::Recording(): recording <Pirates of The Caribbean 5 - Salazars Rache> [/media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec] started
20:10:40 vdr: [1711] recording thread started (pid=1456, tid=1711, prio=high)
20:10:40 vdr: [1712] device 1 receiver thread started (pid=1456, tid=1712, prio=high)
20:10:40 vdr: [1456] markad: cannot find timer for <Pirates of The Caribbean 5 - Salazars Rache>
20:10:41 vdr[1714]: ? getopt returned character code 0107 ? (option_index 0)
20:10:41 vdr: [1456] markad: executing "/usr/bin"/markad  -v  -G  -O --svdrpport=6419  -R  --vps  --autologo=2  -l "/opt/vdr/plugins/markad" --online=2 before "/media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec"
20:10:42 vdr: [1456] markad: cStatusMarkAd::Add():: create epg event handler
20:10:42 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 10->9 at pos 0/2
20:10:42 vdr: [1711] executing '/media/hd/recordings started "/media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec"'
20:10:42 vdr[1717]: sh: 1: /media/hd/recordings: Permission denied
20:10:42 vdr: [1456] markad: pausing pid 1715
20:10:42 vdr: [1456] writing timer id '1@10.75.25.22' to /media/hd/recordings/Pirates_of_The_Caribbean_5_-_Salazars_Rache/2021-01-30.20.15.1-0.rec/.timer
20:10:42 vdr: [1511] VNSI: Requesting clients to reload timers
20:10:42 vdr: [1511] VNSI: Requesting clients to reload timers
...
20:10:42 vdr: [1511] VNSI: Requesting clients to reload recordings list
20:10:43 vdr: [1467] channel 37 (arte HD) event Sa. 30.01.2021 19:30-20:15 (VPS: 30.01. 19:30) 'Pilgern fÃ¼r Peyote' status 4
20:10:47 vdr: [1511] VNSI: Requesting clients to reload timers
20:10:52 vdr: [1511] VNSI: Requesting clients to reload timers
20:10:56 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 8->8 at pos 0/1
...
20:11:07 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 0->0 at pos 0/1
...
20:11:17 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 9->9 at pos 0/1
20:11:17 vdr: [1511] VNSI: Requesting clients to reload timers
20:11:27 vdr: message repeated 2 times: [ [1511] VNSI: Requesting clients to reload timers]
20:11:28 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 4->4 at pos 0/1
...
20:11:39 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 13->13 at pos 0/1
20:11:42 vdr: [1511] VNSI: Requesting clients to reload timers
20:11:47 vdr: [1511] VNSI: Requesting clients to reload timers
20:11:49 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 4->3 at pos 0/2
20:11:52 vdr: [1511] VNSI: Requesting clients to reload timers
20:12:00 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 0->0 at pos 0/1
20:12:12 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 0->0 at pos 0/1
20:12:26 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 11->11 at pos 0/1
20:12:36 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 3->3 at pos 0/1
20:12:46 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 12->12 at pos 0/1
20:12:56 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 2->2 at pos 0/1
20:13:06 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 5->5 at pos 0/1
20:13:06 vdr: [1456] timer 3 (5 2015-2145 VPS 'Stubbe - TÃ¶dliche Hilfe') entered VPS margin
20:13:06 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:13:16 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 11->11 at pos 0/1
20:13:17 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:13:28 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:13:28 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 11->11 at pos 0/1
20:13:32 vdr: [1511] VNSI: Requesting clients to reload timers
20:13:38 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 1->1 at pos 0/1
20:13:39 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:13:43 vdr: [1511] VNSI: Requesting clients to reload timers
20:13:49 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 12->12 at pos 0/1
20:13:50 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:13:59 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 2->2 at pos 0/1
20:14:01 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:03 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:09 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 8->8 at pos 0/1
20:14:12 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:13 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:18 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:19 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 14->14 at pos 0/1
20:14:23 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:28 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:29 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 6->6 at pos 0/1
20:14:33 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:34 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:38 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:39 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 13->13 at pos 0/1
20:14:43 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:45 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:48 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:49 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 2->2 at pos 0/1
20:14:53 vdr: [1511] VNSI: Requesting clients to reload timers
20:14:56 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:14:58 vdr: [1511] VNSI: Requesting clients to reload timers
20:15:00 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 11->11 at pos 0/1
20:15:00 vdr: [1456] switching device 3 to channel 5 S19.2E-1-1079-28006 (ZDF)
20:15:00 vdr: [1456] timer 3 (5 2015-2145 VPS 'Stubbe - TÃ¶dliche Hilfe') start
20:15:00 vdr: [1456] Title: 'Stubbe - TÃ¶dliche Hilfe' Subtitle: ''
20:15:00 vdr: [1456] executing '/media/hd/recordings before "/media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec"'
20:15:00 vdr[1750]: sh: 1: /media/hd/recordings: Permission denied
20:15:00 vdr: [1456] record /media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec
20:15:00 vdr: [1456] creating directory /media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe
20:15:00 vdr: [1456] creating directory /media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec
20:15:00 vdr: [1456] recording to '/media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec/00001.ts'
20:15:00 vdr: [1751] recording thread started (pid=1456, tid=1751, prio=high)
20:15:00 vdr: [1456] markad: cStatusMarkAd::Recording(): recording <Stubbe - TÃ¶dliche Hilfe> [/media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec] started
20:15:00 vdr: [1752] device 3 receiver thread started (pid=1456, tid=1752, prio=high)
20:15:00 vdr: [1456] markad: cannot find timer for <Stubbe - TÃ¶dliche Hilfe>
20:15:01 vdr[1754]: ? getopt returned character code 0107 ? (option_index 0)
20:15:01 vdr: [1456] markad: executing "/usr/bin"/markad  -v  -G  -O --svdrpport=6419  -R  --vps  --autologo=2  -l "/opt/vdr/plugins/markad" --online=2 before "/media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec"
20:15:02 vdr: [1456] markad: pausing pid 1755
20:15:02 vdr: [1456] writing timer id '3@10.75.25.22' to /media/hd/recordings/Stubbe_-_TÃ¶dliche_Hilfe/2021-01-30.20.15.5-0.rec/.timer
20:15:02 vdr: [1511] VNSI: Requesting clients to reload timers
20:15:02 vdr: [1511] VNSI: Requesting clients to reload recordings list
20:15:03 vdr: [1465] channel 1 (ORF1 HD) event Sa. 30.01.2021 20:15-22:19 (VPS: 30.01. 20:13) 'Pirates of The Caribbean 5 - Salazars Rache' status 4
...
20:15:10 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 3->3 at pos 0/1
...
...
0:15:20 vdr[1456]: Mcli::recv_ts_func: Discontinuity on receiver 0x559a49724180 for pid 120: 12->12 at pos 0/2
...20:15:30 vdr: [1751] ERROR: video data stream broken
20:15:30 vdr: [1751] initiating emergency exit
20:15:31 vdr: [1456] emergency exit requested - shutting down

Display More

HelmutB · Jan 31st 2021

Ich meine deaktivieren - so wie du es schon zuvor mit live oder osd2web gemacht hast.

Helmut

HelmutB · Jan 31st 2021

Nur damit kein Unglück passiert und du die Änderungen wieder rückgängig machen kannst: du hast schon direkten Zugriff auf den NUC - direkt davor mit Tastatur oder remote Login?

Helmut

gggggg · Jan 31st 2021

Leider keine Änderung

Code

root@BM2LTSNuc64native-MCLI:~# vdr --showargs
--record=/media/hd/recordings
--video=/media/hd/recordings
--user=root
--grab=/tmp
--port=2001
--watchdog=0
--lirc=/var/run/lirc/lircd
--shutdown=/usr/sbin/power
--log=3
--plugin=mcli --ifname eth0.2 --dvb-s 0 --dvb-c 0 --dvb-t 0 --atsc 0 --dvb-s2 6 --mld-reporter-disable --sock-path /tmp/mcli.socket
--plugin=softhddrm -f -d :0.0 -a hdmi -p hdmi -c PCM -g 1920x1080+0+0 -C HDMI-A-1 -r 50

Display More

Code

Jan 31 16:14:42 BM2LTSNuc64native-MCLI vdr: [1449] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: message repeated 2 times: [ [1449] switching device 2 to channel 2 S19.2E-1-1005-13304 (ORF2O HD)]
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: [1449] timer 1 (2 1615-1617 'Erlebnis Ã–sterreich') start
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: [1449] Title: 'Harrys schÃ¶nste Zeit' Subtitle: 'Harry PrÃ¼nster auf Besuch in Saalfelden-Leogang'
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: [1449] executing '/media/hd/recordings before "/media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec"'
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr[1637]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: [1449] record /media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec
Jan 31 16:15:00 BM2LTSNuc64native-MCLI vdr: [1449] creating directory /media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec
Jan 31 16:15:04 BM2LTSNuc64native-MCLI vdr: [1449] recording to '/media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec/00001.ts'
Jan 31 16:15:04 BM2LTSNuc64native-MCLI vdr: [1449] writing timer id '1@10.75.25.22' to /media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec/.timer
Jan 31 16:15:04 BM2LTSNuc64native-MCLI vdr: [1642] device 2 receiver thread started (pid=1449, tid=1642, prio=high)
Jan 31 16:15:04 BM2LTSNuc64native-MCLI vdr: [1641] recording thread started (pid=1449, tid=1641, prio=high)
Jan 31 16:15:05 BM2LTSNuc64native-MCLI vdr[1449]: Mcli::recv_ts_func: Discontinuity on receiver 0x555a4a27d070 for pid 3000: 1->8 at pos 4/7
Jan 31 16:15:06 BM2LTSNuc64native-MCLI vdr: [1641] executing '/media/hd/recordings started "/media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec"'
Jan 31 16:15:06 BM2LTSNuc64native-MCLI vdr[1644]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 16:15:19 BM2LTSNuc64native-MCLI vdr[1449]: Mcli::recv_ts_func: Discontinuity on receiver 0x555a4a277c20 for pid 767: 13->12 at pos 0/7
Jan 31 16:15:49 BM2LTSNuc64native-MCLI vdr: [1641] ERROR: video data stream broken
Jan 31 16:15:49 BM2LTSNuc64native-MCLI vdr: [1641] initiating emergency exit
Jan 31 16:15:49 BM2LTSNuc64native-MCLI vdr: [1449] emergency exit requested - shutting down
Jan 31 16:15:50 BM2LTSNuc64native-MCLI vdr: [1603] SVDRP client handler thread ended (pid=1449, tid=1603)
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1602] SVDRP server handler thread ended (pid=1449, tid=1602)
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] saving /var/cache/vdr/cam.data
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1641] recording thread ended (pid=1449, tid=1641)
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1642] device 2 receiver thread ended (pid=1449, tid=1642)
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] buffer stats: 1609280 (7%) used
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] timer 1 (2 1615-1617 'Erlebnis Ã–sterreich') stop
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] removing /media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec/.timer
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] executing '/media/hd/recordings after "/media/hd/recordings/Erlebnis_Ã–sterreich/2021-01-31.16.15.2-0.rec"'
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr[1648]: sh: 1: /media/hd/recordings: Permission denied
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] stopping plugin: softhddrm
Jan 31 16:15:51 BM2LTSNuc64native-MCLI vdr: [1449] stopping plugin: mcli

Display More

HelmutB · Jan 31st 2021

Das Log ist zumindest übersichtlicher, der Fehler aber immer gleich:

Code

Jan 31 16:15:19 BM2LTSNuc64native-MCLI vdr[1449]: Mcli::recv_ts_func: Discontinuity on receiver 0x555a4a277c20 for pid 767: 13->12 at pos 0/7
... ### 29 bis 30 Sekunden später:
Jan 31 16:15:49 BM2LTSNuc64native-MCLI vdr: [1641] ERROR: video data stream broken

Ich nehme an die Pid 767 kommt von deinem Live-Programm auf Device 1.

Hast du noch außer der Alphacrypt noch ein anderes Modul für die ORF-Karte mit dem du einen Test durchführen kannst?

Helmut

utiltiy · Jan 31st 2021

Eine easymouse hat er noch, soweit ich das verfolgt habe

gggggg · Jan 31st 2021

Quote from HelmutB
Das Log ist zumindest übersichtlicher, der Fehler aber immer gleich:
Code
Jan 31 16:15:19 BM2LTSNuc64native-MCLI vdr[1449]: Mcli::recv_ts_func: Discontinuity on receiver 0x555a4a277c20 for pid 767: 13->12 at pos 0/7
... ### 29 bis 30 Sekunden später:
Jan 31 16:15:49 BM2LTSNuc64native-MCLI vdr: [1641] ERROR: video data stream broken
Ich nehme an die Pid 767 kommt von deinem Live-Programm auf Device 1.

Hast du noch außer der Alphacrypt noch ein anderes Modul für die ORF-Karte mit dem du einen Test durchführen kannst?

Helmut

Ja, 767 ist das Live Prog (SIX weil es ja das WAF gerät ist ) . Wie utility gesagt hat, hab ich eine neue USB Easymouse, von deren Nutzung ich nicht viel weis.

Komisch ist schon, dass das Live-TV keine Probs macht oer ...

HelmutB · Jan 31st 2021

Quote from gggggg

Komisch ist schon, dass das Live-TV keine Probs macht

Auch zusammen mit einer Aufnahme - z.B. von SIXX ?

gggggg · Jan 31st 2021

Ich habe jetzt testhalber auf orfHD und ZDF eine Aufnahme gestartet und man sieht beim Zappen auf LCARS OSD ja gut wie er die 3 devices nutzt. Device 1 ist denke ich für orfHD2 und device 2 für ZDF (SD). Mit 3 passiert das Zappen.

Am Ende friert das Bild beim schalten auf orf III HD ein. Der Pfeil des live-TV zeigt auf device 1.

Code

18:01:03 vdr: [1566] switching to channel 26 S19.2E-1-1079-28007 (3sat)
18:01:03 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:03 vdr: [5186] device 3 receiver thread ended (pid=1566, tid=5186)
18:01:08 vdr: video: crop to +0+0 720x576
18:01:08 vdr: video: normal aspect output 1920x1080+0+0
18:01:08 vdr: GetFormat Init ok 720x576
18:01:10 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:10 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:10 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:10 vdr: [1566] switching to channel 27 S19.2E-1-1101-28107 (BR Fernsehen SÃ¼d)
18:01:10 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:10 vdr: [5195] device 3 receiver thread started (pid=1566, tid=5195, prio=high)
18:01:11 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:11 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:11 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:11 vdr: [1566] switching to channel 28 S19.2E-1-1093-28487 (ARD-alpha)
18:01:12 vdr: [5195] device 3 receiver thread ended (pid=1566, tid=5195)
18:01:12 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:12 vdr: [5197] device 3 receiver thread started (pid=1566, tid=5197, prio=high)
18:01:13 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:13 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:13 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:13 vdr: [1566] switching to channel 29 S19.2E-1-1117-13001 (ORF1)
18:01:13 vdr: [5197] device 3 receiver thread ended (pid=1566, tid=5197)
18:01:13 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:13 vdr: [5199] device 3 receiver thread started (pid=1566, tid=5199, prio=high)
18:01:14 vdr: video: crop to +0+0 720x576
18:01:14 vdr: video: normal aspect output 1920x1080+0+0
18:01:14 vdr: GetFormat Init ok 720x576
18:01:17 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:17 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:17 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:17 vdr: [1566] switching to channel 30 S19.2E-1-1117-13006 (ORF2 O)
18:01:17 vdr: [5199] device 3 receiver thread ended (pid=1566, tid=5199)
18:01:17 vdr: [5205] device 3 receiver thread started (pid=1566, tid=5205, prio=high)
18:01:17 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:17 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:17 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:17 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:17 vdr: [1566] switching to channel 31 S19.2E-1-1115-13101 (ORF III)
18:01:17 vdr: [5205] device 3 receiver thread ended (pid=1566, tid=5205)
18:01:17 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:17 vdr: [5207] device 3 receiver thread started (pid=1566, tid=5207, prio=high)
18:01:18 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:18 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:18 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:18 vdr: [1566] switching to channel 32 S19.2E-1-1117-13014 (ORF2E)
18:01:18 vdr: [5207] device 3 receiver thread ended (pid=1566, tid=5207)
18:01:18 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:18 vdr: [5209] device 3 receiver thread started (pid=1566, tid=5209, prio=high)
18:01:19 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:19 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:19 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:19 vdr: [1566] switching to channel 33 S19.2E-1-1115-13104 (LT1-OOE)
18:01:19 vdr: [5209] device 3 receiver thread ended (pid=1566, tid=5209)
18:01:19 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:19 vdr: [5211] device 3 receiver thread started (pid=1566, tid=5211, prio=high)
18:01:19 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:19 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:19 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:19 vdr: [1566] switching to channel 34 S19.2E-1-1005-13308 (ORF III HD)
18:01:19 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:19 vdr: [5211] device 3 receiver thread ended (pid=1566, tid=5211)
18:01:20 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:20 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:20 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:20 vdr: [1566] switching to channel 35 S19.2E-1-1003-13228 (ATV HD)
18:01:20 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:20 vdr: [5213] device 3 receiver thread started (pid=1566, tid=5213, prio=high)
18:01:21 vdr: [1566] [softhddev]SetPlayMode: 0
18:01:21 vdr: [1566] [softhddev]SetVideoDisplayFormat: 1
18:01:21 vdr: [1566] [softhddev]GetSpuDecoder:
18:01:21 vdr: [1566] switching to channel 34 S19.2E-1-1005-13308 (ORF III HD)
18:01:21 vdr: [1566] [softhddev]SetPlayMode: 1
18:01:21 vdr: [5213] device 3 receiver thread ended (pid=1566, tid=5213)

Display More

das full log ab den timerstarts ist hier

[gelöst] mcli ERROR: video data stream broken

Participate now!

Share