ZitatHätte mich einfach mal interessiert warum nicht dieser Weg gegangen wurde.
Na wegen
ZitatWas "low effort" möglich ist wird gemacht.
ZitatHätte mich einfach mal interessiert warum nicht dieser Weg gegangen wurde.
Na wegen
ZitatWas "low effort" möglich ist wird gemacht.
Meine PKGBUILDs sind jetzt auch fertig. Ich habe jetzt den Entwickler im AUR auch nochmal via Mail angeschrieben weil zumindest das librepfunc-PKGBUILD klar gegen Vorgaben verstößt.
Suffix
pkgname
with-cvs
,-svn
,-hg
,-darcs
,-bzr
,-git
etc. unless the package fetches a specific release.
Ich hoffe das wird im AUR noch angepasst.
Ich habe auch das "make download" für mein w_scan_cpp PKGBUILD rausgeworfen und stattdessen alle Sourcen im PKGBUILD header. Erst danach hab ich gesehen das du das auch als Tarball hast. Aber jetzt wo das mit dem selber zusammenstellen der Sourcen schon klappt will ich das eigentlich auch nicht mehr rauswerfen:
https://github.com/VDR4Arch/vd…aster/w_scan_cpp/PKGBUILD
Das "wirbelscan" Plugin hab ich dann in dem Zuge auch direkt aktualisiert.
Wenn ich helfen kann - PM.
Was das Plugin betrifft, sher schön. Danke.
Hello,
I am having problems trying to switch ports of my uncommitted diseqc switch.
root@vdr:/usr/local/src# w_scan_cpp -fs -D 2u -s S19E2
/*******************************************************************************
* w_scan_cpp Version 20211128
******************************************************************************/
/*******************************************************************************
* devices
******************************************************************************/
Device0 dvb:a0f0: TurboSight QBOX3 DVB-S/S2
/*******************************************************************************
* Scan Type
******************************************************************************/
DVB-S/S2
satellite = 19.2 east Astra 1KR/Astra 1L/Astra 1M/Astra 1N
/*******************************************************************************
* lnb
******************************************************************************/
Setup.LnbFrequLo = 9750
Setup.LnbFrequHi = 10600
Setup.LnbSLOF = 11700
/*******************************************************************************
* diseqc
******************************************************************************/
S19.2E 11700 V 9750 t v W15 [E0 10 39 F2] W15 A W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 39 F2] W15 A W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 39 F2] W15 A W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 39 F2] W15 A W15 T
Setup.DiSEqC = 1
Setup.UsePositioner = 0
13:21:47 wirbelscan version 2021.11.28 @ VDR 2.5.6
13:21:47 using settings for '19.2 east Astra 1KR/Astra 1L/Astra 1M/Astra 1N'
13:21:47 no diseqc settings for (, 10714, H)
13:21:47 no diseqc settings for (, 10729, V)
13:21:47 no diseqc settings for (, 10744, H)
13:21:47 no diseqc settings for (, 10759, V)
13:21:47 no diseqc settings for (, 10773, H)
13:21:47 no diseqc settings for (, 10788, V)
13:21:47 no diseqc settings for (, 10803, H)
13:21:47 no diseqc settings for (, 10818, V)
13:21:47 no diseqc settings for (, 10832, H)
13:21:47 no diseqc settings for (, 10847, V)
13:21:47 no diseqc settings for (, 10862, H)
13:21:47 no diseqc settings for (, 10877, V)
13:21:47 no diseqc settings for (, 10891, H)
13:21:47 no diseqc settings for (, 10906, V)
13:21:47 no diseqc settings for (, 10921, H)
13:21:47 no diseqc settings for (, 10936, V)
13:21:47 no diseqc settings for (, 10964, H)
13:21:47 no diseqc settings for (, 10979, V)
13:21:47 no diseqc settings for (, 10994, H)
13:21:47 no diseqc settings for (, 11009, V)
13:21:47 no diseqc settings for (, 11023, H)
13:21:47 no diseqc settings for (, 11038, V)
13:21:47 no diseqc settings for (, 11053, H)
13:21:47 no diseqc settings for (, 11068, V)
13:21:47 no diseqc settings for (, 11082, H)
13:21:47 no diseqc settings for (, 11097, V)
13:21:47 no diseqc settings for (, 11112, H)
13:21:47 no diseqc settings for (, 11127, V)
13:21:47 no diseqc settings for (, 11141, H)
13:21:47 no diseqc settings for (, 11156, V)
13:21:47 no diseqc settings for (, 11171, H)
13:21:47 no diseqc settings for (, 11186, V)
13:21:47 no diseqc settings for (, 11214, H)
13:21:47 no diseqc settings for (, 11229, V)
13:21:47 no diseqc settings for (, 11244, H)
13:21:47 no diseqc settings for (, 11259, V)
13:21:47 no diseqc settings for (, 11273, H)
13:21:47 no diseqc settings for (, 11288, V)
13:21:47 no diseqc settings for (, 11303, H)
13:21:47 no diseqc settings for (, 11318, V)
13:21:47 no diseqc settings for (, 11332, H)
13:21:47 no diseqc settings for (, 11347, V)
13:21:47 no diseqc settings for (, 11362, H)
13:21:47 no diseqc settings for (, 11377, V)
13:21:47 no diseqc settings for (, 11391, H)
13:21:47 no diseqc settings for (, 11406, V)
13:21:47 no diseqc settings for (, 11421, H)
13:21:47 no diseqc settings for (, 11436, V)
13:21:47 no diseqc settings for (, 11464, H)
13:21:47 no diseqc settings for (, 11479, V)
13:21:47 no diseqc settings for (, 11494, H)
13:21:47 no diseqc settings for (, 11509, V)
13:21:47 no diseqc settings for (, 11523, H)
13:21:47 no diseqc settings for (, 11538, V)
13:21:47 no diseqc settings for (, 11553, H)
13:21:47 no diseqc settings for (, 11568, V)
13:21:47 no diseqc settings for (, 11582, H)
13:21:47 no diseqc settings for (, 11597, V)
13:21:47 no diseqc settings for (, 11612, H)
13:21:47 no diseqc settings for (, 11627, V)
13:21:47 no diseqc settings for (, 11641, H)
13:21:47 no diseqc settings for (, 11656, V)
13:21:47 no diseqc settings for (, 11671, H)
13:21:47 no diseqc settings for (, 11686, V)
13:21:47 no diseqc settings for (, 11720, H)
13:21:47 no diseqc settings for (, 11739, V)
13:21:47 no diseqc settings for (, 11759, H)
13:21:47 no diseqc settings for (, 11778, V)
13:21:47 no diseqc settings for (, 11798, H)
13:21:47 no diseqc settings for (, 11817, V)
13:21:47 no diseqc settings for (, 11837, H)
13:21:47 no diseqc settings for (, 11856, V)
13:21:47 no diseqc settings for (, 11876, H)
13:21:47 no diseqc settings for (, 11895, V)
13:21:47 no diseqc settings for (, 11915, H)
13:21:47 no diseqc settings for (, 11934, V)
13:21:47 no diseqc settings for (, 11954, H)
13:21:47 no diseqc settings for (, 11973, V)
13:21:47 no diseqc settings for (, 11993, H)
13:21:47 no diseqc settings for (, 12012, V)
13:21:47 no diseqc settings for (, 12032, H)
13:21:47 no diseqc settings for (, 12051, V)
13:21:47 no diseqc settings for (, 12071, H)
13:21:47 no diseqc settings for (, 12090, V)
13:21:47 no diseqc settings for (, 12110, H)
13:21:47 no diseqc settings for (, 12129, V)
13:21:47 no diseqc settings for (, 12149, H)
13:21:47 no diseqc settings for (, 12168, V)
13:21:47 no diseqc settings for (, 12188, H)
13:21:47 no diseqc settings for (, 12207, V)
13:21:47 no diseqc settings for (, 12227, H)
13:21:47 no diseqc settings for (, 12246, V)
13:21:47 no diseqc settings for (, 12266, H)
13:21:47 no diseqc settings for (, 12285, V)
13:21:47 no diseqc settings for (, 12305, H)
13:21:47 no diseqc settings for (, 12324, V)
13:21:47 no diseqc settings for (, 12344, H)
13:21:47 no diseqc settings for (, 12363, V)
13:21:47 no diseqc settings for (, 12383, H)
13:21:47 no diseqc settings for (, 12402, V)
13:21:47 no diseqc settings for (, 12422, H)
13:21:47 no diseqc settings for (, 12441, V)
13:21:47 no diseqc settings for (, 12461, H)
13:21:47 no diseqc settings for (, 12480, V)
13:21:47 no diseqc settings for (, 12515, H)
13:21:47 no diseqc settings for (, 12522, V)
13:21:47 no diseqc settings for (, 12545, H)
13:21:47 no diseqc settings for (, 12552, V)
13:21:47 no diseqc settings for (, 12574, H)
13:21:47 no diseqc settings for (, 12581, V)
13:21:47 no diseqc settings for (, 12604, H)
13:21:47 no diseqc settings for (, 12611, V)
13:21:47 no diseqc settings for (, 12633, H)
13:21:47 no diseqc settings for (, 12640, V)
13:21:47 no diseqc settings for (, 12663, H)
13:21:47 no diseqc settings for (, 12692, H)
13:21:47 no diseqc settings for (, 12699, V)
13:21:47 no diseqc settings for (, 12722, H)
13:21:47 no diseqc settings for (, 12729, V)
13:21:47 testing '???:10714:HC2M5O35P0S1:S19.2E:27500:0:0:0:0:8192:0:0:0'
13:21:47 device 0 = TurboSight QBOX3 DVB-S/S2 (not usable)
13:21:47 No DVB-S2 device available - trying fallback to DVB-S
13:21:47 testing '???:10714:HC2M2S0:S19.2E:27500:0:0:0:0:8192:0:0:0'
13:21:47 device 0 = TurboSight QBOX3 DVB-S/S2 (not usable)
13:21:47 No device available - exiting!
Alles anzeigen
if i don't use parameter: -D 2u
it is scanning only on port 0 which is 13East for me
Looks like one line of code is missing in the included wirbelscan Plugin, will have a look at it later.
As i cannot find any drawbacks on this patch, and it solved already diseqc committed switches..
I'm now going to take it over in both, wirbelscan plugin git and w_scan_cpp git.
If testing, you may directly git afterwards and report.
I confirm the switch committed is now ok
Thanks
Yes, but for the uncomitted switch case, a device should be found and a diseqc sequence will be send.
However, i didnt find any complete VDR diseqc.conf sequence for this case, so uncommitted switches may or may not work (yet).
If somebody could share his settings, would be nice.
# DiSEqC configuration for VDR
#
# Format:
#
# satellite slof polarization lof command...
#
# satellite: one of the 'S' codes defined in sources.conf
# slof: switch frequency of LNB; the first entry with
# an slof greater than the actual transponder
# frequency will be used
# polarization: V = vertical, H = horizontal, L = Left circular, R = Right circular
# lof: the local oscillator frequency to subtract from
# the actual transponder frequency
# command:
# t tone off
# T tone on
# v voltage low (13V)
# V voltage high (18V)
# A mini A
# B mini B
# Wnn wait nn milliseconds (nn may be any positive integer number)
# [xx ...] hex code sequence (max. 6)
#
# The 'command...' part is optional.
#
#S13E:9750/S13E:10600/11700/VH%1_1:%|
S13E 11700 V 9750 t v W15 [E0 10 39 F0] W15 t
S13E 99999 V 10600 t v W15 [E0 10 39 F0] W15 T
S13E 11700 H 9750 t V W15 [E0 10 39 F0] W15 t
S13E 99999 H 10600 t V W15 [E0 10 39 F0] W15 T
#S16E:9750/S16E:10600/11700/VH%1_2:%|
S16E 11700 V 9750 t v W15 [E0 10 39 F1] W15 t
S16E 99999 V 10600 t v W15 [E0 10 39 F1] W15 T
S16E 11700 H 9750 t V W15 [E0 10 39 F1] W15 t
S16E 99999 H 10600 t V W15 [E0 10 39 F1] W15 T
#S19.2E:9750/S19.2E:10600/11700/VH%1_3:%|
S19.2E 11700 V 9750 t v W15 [E0 10 39 F2] W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 39 F2] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 39 F2] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 39 F2] W15 T
#S23.5E:9750/S23.5E:10600/11700/VH%1_4:%|
S23.5E 11700 V 9750 t v W15 [E0 10 39 F3] W15 t
S23.5E 99999 V 10600 t v W15 [E0 10 39 F3] W15 T
S23.5E 11700 H 9750 t V W15 [E0 10 39 F3] W15 t
S23.5E 99999 H 10600 t V W15 [E0 10 39 F3] W15 T
#S28.2E:9750/S28.2E:10600/11700/VH%1_5:%|
S28.2E 11700 V 9750 t v W15 [E0 10 39 F4] W15 t
S28.2E 99999 V 10600 t v W15 [E0 10 39 F4] W15 T
S28.2E 11700 H 9750 t V W15 [E0 10 39 F4] W15 t
S28.2E 99999 H 10600 t V W15 [E0 10 39 F4] W15 T
Alles anzeigen
I used this script to configure my diseqc.conf:
diseqcsetup:A bash script for VDR DiSEqC configuration
That's great, i have now all infos.
DiSEqC.cpp, line 54 needs to be changed.
For some strange reason, i put a mini diseqc A (switch position 1) there,
which is wrong at the one hand, and not necessary at all on the other hand.
DiSEqC.cpp:54
--if (i & 1) ss << "] W15 A W15 T"; else ss << "] W15 A W15 t";
++if (i & 1) ss << "] W15 T"; else ss << "] W15 t";
with the latest version and that change in DiSEqC.cpp, uncommitted switches should work normally.
If your switch ignores the wrong mini diseqc, then it should work already now.
The commandline you tried, was perfectly fine for your case
w_scan_cpp -fs -D 2u -s S19E2
Ich habe es mir auch mal angeschaut, in der Hoffnung darüber eine gute channels.conf zu erhalten. Leider findet w_scan_cpp auf meiner Fritzbox 6519 (7.29) keinen einzeigen Sender.
Ich habe es mit diesen Einstellungen gestestet:
w_scan_cpp -fc -cDE -t
w_scan_cpp Version 20220105
/*******************************************************************************
* w_scan_cpp Version 20220105
******************************************************************************/
/*******************************************************************************
* devices
******************************************************************************/
skip DVB devices - using satip plugin.
SATIP server scan requested
SATIP server scan requested
SATIP server scan requested
using whiterouter@192.168.1.1
Device0 plg: SAT>IP 0
Device1 plg: SAT>IP 1
/*******************************************************************************
* Scan Type
******************************************************************************/
DVB-C
country = GERMANY
00:43:39 wirbelscan version 2022.01.05 @ VDR 2.6.0
00:43:39 using settings for 'GERMANY'
00:43:39 DVB cable
00:43:39 DVB-C
00:43:39 testing '???:410:C0M64:C:6900:0:0:0:0:8192:0:0:0'
00:43:39 device 0 = SAT>IP 0
00:43:39 device has no gen2 delsys support.
00:43:39 device 1 = SAT>IP 1
00:43:39 device has no gen2 delsys support.
00:43:39 frontend SAT>IP 1
00:43:39 searching M256...
00:43:39 C 73.00 MHz SR 6900 C0I1M256
00:43:43 C 73.00 MHz SR 6875 C0I1M256
00:43:48 C 114.00 MHz SR 6900 C0I1M256
00:43:53 C 114.00 MHz SR 6875 C0I1M256
...
Alles anzeigen
Ich denke satip mit Kabelanschluss hat noch nie jemand probiert, diese Kombi ist einfach zu exotisch.
Versuch mal
w_scan_cpp -fc -cDE --satip --inversion 0
Mit der Einstellung geht es, aber es bleibt irgendwann einfach stehen, selbst nach 2 Stunden ging es nicht weiter. Gibt es... keine Ahnung eine Timeout funktion? In der Hilfe konnte ich zu dem Verhalten leider nichts finden.
Ich hab das noch nicht beobachtet, keine Ahnung was bei dir passiert.
Ich habs gerade mal mit minisatip && Kabel per satip probiert, und bis auf die Inversion gibt es erstmal nichts zu beanstanden.
/*******************************************************************************
* w_scan_cpp Version 20220105
******************************************************************************/
/*******************************************************************************
* devices
******************************************************************************/
skip DVB devices - using satip plugin.
using minisatip@192.168.2.66
Device0 plg: SAT>IP 0
Device1 plg: SAT>IP 1
/*******************************************************************************
* Scan Type
******************************************************************************/
DVB-C
country = GERMANY
13:38:16 wirbelscan version 2022.01.05 @ VDR 2.6.0
13:38:16 using settings for 'GERMANY'
13:38:16 DVB cable
13:38:16 DVB-C
13:38:16 testing '???:410:C0M64:C:6900:0:0:0:0:8192:0:0:0'
13:38:16 device 0 = SAT>IP 0
13:38:16 device has no gen2 delsys support.
13:38:16 device 1 = SAT>IP 1
13:38:16 device has no gen2 delsys support.
13:38:16 frontend SAT>IP 1
13:38:16 searching M256...
13:38:16 C 73.00 MHz SR 6900 C0I0M256
(...)
13:43:44 C 306.00 MHz SR 6900 C0I0M256
13:43:46 tuning to C 306.00 MHz SR 6900 C0I0M256
13:43:47 lock.
13:43:47 ScannedTransponders.Add: 'C 306.00 MHz SR 6900 C0I0M256'
13:43:48 searching 49 services
13:43:52 tagesschau24 HD
13:43:52 ONE HD
(...)
14:14:33 Add channel 'WDR Mediathek (Internet);ARD:546000:C0M256:C:6900:331=36:332=deu@17,333=deu@17:0:0:28370:1:1021:0'
14:14:33 leaving scanner
423 services. scan time: 36:16
1-2-3.tv HD;Pyur:554000:C0M256:C:6900:301=27:0;302=deu@106:310:0:1538:61697:49158:0
1-2-3.tv;Pyur:434000:C0M256:C:6900:1301=2:1302=deu@3:1310:0:516:61697:49154:0
(...)
zdf_neo HD;ZDFvision:410000:C0M256:C:6900:6310=27:6320=deu@3,6321=mis@3,6323=mul@3;6322=deu@106:6330:0:11130:1:1011:0
zdf_neo;ZDFvision:514000:C0M256:C:6900:660=2:670=deu@3,671=mis@3,672=mul@3;675=deu@106:680:0:28014:1:1079:0
Alles anzeigen
Für raspian bullseye ein install script für w_scan_cpp. Benötigt Netzwerk.
Ist zwar nur meine unwesentliche Meinung, aber vielleicht wäre da ein "git submodule" besser gewesen. Dann hättest du die Sachen trotzdem an einer Stelle, man baut da aber nicht potentiell Querreferenzen auf. Also der Form "wenn librepfunc aktualisiert wird, dann muss w_scan_cpp und wirbelscan-plugin neu gebaut werden". Oder noch schlimmer: Neue w_scan_cpp braucht neuere librepfunc und zieht damit ein rebuild von wirbelscan-plugin nach sich.
Muss aber jeder selber wissen wie er entwickeln will. Hätte nebenbei auch den Vorteil gehabt das mit jedem Commit im GIT die korrekte zugehörige Version (commit-ID) von "librepfunc" verlinkt ist.
librepfunc kommt demnächst in debian an.
Jetzt in debian, https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1023110
Wer debian Sid benutzt, braucht nicht mehr selbst zu bauen.The following list was sorted by dates of upload to Sid.
All packages are NEW in Debian.The most recent uploads can have no date.
Source Name | Admission | Bug | RC | NMU | Pop | Maintainer
w-scan-cpp | 2023-01-14 | | | | 4 | Fab Stz
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!