Ansible & zweiter Bildschirm

rallye · Jul 24th 2020

Ich bin noch in den Anfängen mit Ansible ..... Habe Das System mit nur einem Bildschirm aufgesetzt (da ich keinen DVI-VGA Adapter hatte) und bekam normales Fernsehbild. Nun habe ich den Adapter bekommen, den 2ten Bildschirm angesteckt und das Playbook nochmals durchlaufen lassen. Folgendes ist angezeigt worden:

Code

TASK [yavdr-xorg : show parsed xrandr data] ************************************
ok: [localhost] => {
"xrandr": {
"Screen 0:": {
"DVI-D-0": {
"EDID": "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",
"auto": "",
"current": "1920x1080_60",
"is_connected": true,
"modes": {
"1024x768": [
85,
75,
70,
60
],
"1152x864": [
75
],
"1280x1024": [
85,
75
],
"1280x720": [
60
],
"1280x960": [
85,
60
],
"1600x1200": [
60
],
"1920x1080": [
60
],
"640x480": [
75,
73,
60
],
"720x480": [
60
],
"800x600": [
75,
72,
60,
56
]
},
"preferred": "1920x1080_60"
},
"HDMI-0": {
"EDID": "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",
"auto": "",
"current": "",
"is_connected": true,
"modes": {
"1280x720": [
60,
50
],
"1440x480": [
60
],
"1440x576": [
50
],
"1920x1080": [
60,
50,
24
],
"2880x480": [
60
],
"2880x576": [
50
],
"640x480": [
60
],
"720x480": [
60
],
"720x576": [
50
]
},
"preferred": ""
}
}
}
}
TASK [yavdr-xorg : show primary display configuration] *************************
ok: [localhost] => {
"xorg.primary": {
"bus_id": "PCI:1@0:0:0",
"connector": "HDMI-0",
"edid": "/etc/X11/edid.HDMI-0.bin",
"gpu_name": "GeForce GT 1030",
"mode": "1920x1080_50",
"model": "DENON-AVAMP",
"modelines": [
"Modeline \"1920x540_50\" 74.25 1920 2448 2492 2640 540 542 547 562 +hsync +vsync interlace",
"Modeline \"1920x540_50\" 74.25 1920 2448 2492 2640 540 542 547 562 +hsync +vsync interlace",
"Modeline \"1920x540_60\" 74.25 1920 2008 2052 2200 540 542 547 562 +hsync +vsync interlace",
"Modeline \"1280x720_50\" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync",
"Modeline \"1280x720_60\" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync",
"Modeline \"1920x1080_25\" 74.250 1920 2448 2492 2640 1080 1082 1089 1125 +hsync +vsync interlace",
"Modeline \"1920x1080_30\" 74.250 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync interlace",
"Modeline \"1920x1080_50\" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync",
"Modeline \"1920x1080_60\" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync",
"Modeline \"1920x1080_24\" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync",
"Modeline \"720x576_50\" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync",
"Modeline \"720x480_60\" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync",
"Modeline \"720x576_50\" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync",
"Modeline \"720x480_60\" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync",
"Modeline \"1440x576_25\" 27.000 1440 1464 1590 1728 576 578 581 625 -hsync -vsync interlace",
"Modeline \"1440x480_30\" 27.027 1440 1478 1602 1716 480 484 487 525 -hsync -vsync interlace",
"Modeline \"1440x576_25\" 27.000 1440 1464 1590 1728 576 578 581 625 -hsync -vsync interlace",
"Modeline \"1440x480_30\" 27.027 1440 1478 1602 1716 480 484 487 525 -hsync -vsync interlace",
"Modeline \"640x480_60\" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync",
"Modeline \"1440x480_60\" 54.054 1440 1472 1596 1716 480 489 495 525 -hsync -vsync",
"Modeline \"2880x480_60\" 108.000 2880 2944 3192 3432 480 489 495 525 -hsync -vsync",
"Modeline \"1440x480_60\" 54.054 1440 1472 1596 1716 480 489 495 525 -hsync -vsync",
"Modeline \"2880x480_60\" 108.000 2880 2944 3192 3432 480 489 495 525 -hsync -vsync",
"Modeline \"1440x576_50\" 54.000 1440 1464 1592 1728 576 581 586 625 -hsync -vsync",
"Modeline \"2880x576_50\" 108.000 2880 2928 3184 3456 576 581 586 625 -hsync -vsync",
"Modeline \"1440x576_50\" 54.000 1440 1464 1592 1728 576 581 586 625 -hsync -vsync",
"Modeline \"2880x576_50\" 108.000 2880 2928 3184 3456 576 581 586 625 -hsync -vsync",
"Modeline \"2880x480_30\" 54.054 2880 2956 3204 3432 480 484 487 525 -hsync -vsync interlace",
"Modeline \"2880x480_30\" 54.054 2880 2956 3204 3432 480 484 487 525 -hsync -vsync interlace",
"Modeline \"2880x576_25\" 54.000 2880 2928 3180 3456 576 578 581 625 -hsync -vsync interlace",
"Modeline \"2880x576_25\" 54.000 2880 2928 3180 3456 576 578 581 625 -hsync -vsync interlace",
"Modeline \"720x576_50\" 27.00 720 732 796 864 576 581 586 625 -hsync -vsync",
"Modeline \"1920x540_60\" 74.25 1920 2008 2052 2200 540 542 547 562 +hsync +vsync interlace"
],
"refreshrate": 50,
"resolution": "1920x1080",
"vendor": "DON"
}
}
TASK [yavdr-xorg : show secondary display configuration] ***********************
ok: [localhost] => {
"xorg.secondary": {
"bus_id": "PCI:1@0:0:0",
"connector": "DVI-D-0",
"edid": "/etc/X11/edid.DVI-D-0.bin",
"gpu_name": "GeForce GT 1030",
"mode": "1920x1080_60",
"model": "Unknown",
"modelines": [],
"refreshrate": 60,
"resolution": "1920x1080",
"vendor": "Unknown"
}
}
TASK [yavdr-xorg : show drm data (emtpy for nvidia)] ***************************
ok: [localhost] => {
"drm": {
"ignored_outputs": [
"HDMI-A-1",
"VGA-1",
"DP-2",
"HDMI-A-2",
"DP-3",
"HDMI-A-3",
"DP-1"
],
"primary": {},
"secondary": {}
}
}

Display More

Aber auch nach einem Reboot bleibt mein 2ter BS dunkel. Was mache ich falsch bzw was habe ich noch nicht gemacht um einen Output zu erhalten ?

Danke

seahawk1986 · Jul 24th 2020

Wie sieht denn die erzeugte /etc/X11/xorg.conf aus?

rallye · Jul 24th 2020

Code

#
# *** ANSIBLE MANAGED FILE ***
# template: /home/mod/yavdr-ansible/roles/yavdr-xorg/templates/xorg.conf.j2
#
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
#InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputClass"
Identifier "exclude eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DON"
ModelName "DENON-AVAMP"
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
BoardName "GeForce GT 1030"
BusID "PCI:1@0:0:0"
Screen 0
Option "ConnectedMonitor" "HDMI-0, DVI-D-0"
Option "CustomEDID" "HDMI-0:/etc/X11/edid.HDMI-0.bin;DVI-D-0:/etc/X$
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "HDMI-0"
Option "UseDisplayDevice" "HDMI-0"
Option "metamodes" "HDMI-0: 1920x1080_50 +0+0 {ForceCompositionPipe$
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
BoardName "GeForce GT 1030"
BusID "PCI:1@0:0:0"
Screen 1
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "DVI-D-0"
#Option "ConnectedMonitor" "DVI-D-0"
Option "UseDisplayDevice" "DVI-D-0"
#Option "CustomEDID" "DVI-D-0:/etc/X11/edid.DVI-D-0.bin"
Option "metamodes" "DVI-D-0: 1920x1080_60 +0+0 {ForceCompositionPip$
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection

Display More

Oben die /etc/X11/xorg.conf. Der Hauptbildschirm hängt am HDMI, der 2te Monitor am DVI über einen DVI->VGA - Adapter

seahawk1986 · Jul 25th 2020

rallye wrote:

Der Hauptbildschirm hängt am HDMI

Hast du mal geschaut, ob das Problem ohne den Denon-Receiver dazwischen auch auftritt? Eventuell passt da etwas bei der vom Receiver gesendeten EDID nicht.

rallye · Jul 25th 2020

Leider bringt das keine Änderung. Der 2. BS bleibt dunkel. Ich hab den Denon überbrückt (HDMI-Kabel geht nun direkt zum Panasonic [auch älteres Modell]) und das Playbook nochmals durchlaufen lassen. unten die neue /etc/X11/xorg.conf

Code

#
# *** ANSIBLE MANAGED FILE ***
# template: /home/mod/yavdr-ansible/roles/yavdr-xorg/templates/xorg.conf.j2
#
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
#InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputClass"
Identifier "exclude eventlircd devices"
MatchTag "eventlircd"
Option "Ignore" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "MEI"
ModelName "PANASONIC-TV"
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
BoardName "GeForce GT 1030"
BusID "PCI:1@0:0:0"
Screen 0
Option "ConnectedMonitor" "HDMI-0, DVI-D-0"
Option "CustomEDID" "HDMI-0:/etc/X11/edid.HDMI-0.bin;DVI-D-0:/etc/X11/edid.DVI-D-0.bin"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "HDMI-0"
Option "UseDisplayDevice" "HDMI-0"
Option "metamodes" "HDMI-0: 1920x1080_50 +0+0 {ForceCompositionPipeline=Off, ForceFullCompositionPipeline=Off}"
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
BoardName "GeForce GT 1030"
BusID "PCI:1@0:0:0"
Screen 1
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "DVI-D-0"
#Option "ConnectedMonitor" "DVI-D-0"
Option "UseDisplayDevice" "DVI-D-0"
#Option "CustomEDID" "DVI-D-0:/etc/X11/edid.DVI-D-0.bin"
Option "metamodes" "DVI-D-0: 1920x1080_60 +0+0 {ForceCompositionPipeline=Off, ForceFullCompositionPipeline=Off}"
Option "AllowIndirectGLXProtocol" "off"
Option "TripleBuffer" "on"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection

Display More

Anbei noch meine alte /etc/X11/xorg-yavdr.conf aus der yavdr0.6.2-Installation. Die war noch mit der GT430-Karte und durch den Denon "durchgeschleift". Diese Config hat damals funktioniert ...,

Code

#################################################################################
# #
# The following configuration file is generated automatically by the yaVDR #
# system. Don't change this file as every update of yaVDR will overwrite #
# the local changes. Instead put your required customizations #
# into /etc/yavdr/templates_custom/ based on the original templates #
# under /usr/share/yavdr/templates. #
# #
# http://www.yavdr.org/developer-zone/template-overview/ #
# #
# #
#################################################################################
#
# based on
#
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Oct 20 21:00:15 PDT 2009
#
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Unknown"
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Screen 0
Option "DPI" "100x100"
BusID "PCI:1:0:0"
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
Option "OnDemandVBlankinterrupts" "on"
Option "FlatPanelProperties" "Scaling = Native"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Screen 1
BusID "PCI:1:0:0"
Option "NoLogo" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "False"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "DynamicTwinView" "0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080_24" "1920x1080_50" "1920x1080_60"
EndSubSection
Option "ConnectedMonitor" "DFP-2, CRT-0"
Option "UseDisplayDevice" "DFP-2"
Option "CustomEDID" "DFP-2:/etc/X11/edid.0.yavdr"
Option "MetaModes" "DFP-2: 1920x1080_24 { ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0 }"
Option "MetaModes" "DFP-2: 1920x1080_50 { ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0 }"
Option "MetaModes" "DFP-2: 1920x1080_60 { ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0 }"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
Option "UseDisplayDevice" "CRT-0"
Option "CustomEDID" "CRT-0:/etc/X11/edid.1.yavdr"
Option "MetaModes" "CRT-0: 1600x1200 { ViewPortIn=1600x1200, ViewPortOut=1600x1200+0+0 }"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection

Display More

seahawk1986 · Jul 25th 2020

rallye wrote:

Der 2. BS bleibt dunkel.

Um das mal genauer einzugrenzen - meinst du damit den TV oder den anderen Monitor, der dran hängt (und aus Sicht des Playbooks der zweite Bildschirm ist)?

Gibt es eine /var/lib/vdr/.second_display und falls ja: was steht da drin?

Ist der X-Server für den zweiten Bildschirm erreichbar?

Code

xrandr -d :0.1

Läuft Openbox für den zweiten Bildschirm?

Code

sudo -u vdr DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/666/bus systemctl --user status openbox-second.service

rallye · Jul 25th 2020

seahawk1986 wrote:

Um das mal genauer einzugrenzen - meinst du damit den TV oder den anderen Monitor, der dran hängt (und aus Sicht des Playbooks der zweite Bildschirm ist)?

Ich meine den anderen Monitor. Das TV-Bild und der Ton laufen. Der 2te (andere) Monitor ist beim initial Boot (BIOS-Options) aktiv, sonst dunkel.

In der /var/lib/vdr/.second_display steht: DISPLAY=:0.1

seahawk1986 wrote:

Ist der X-Server für den zweiten Bildschirm erreichbar?

Dürfte m.E. erreichbar sein

Code

mod@HTPC-WZ:~$ xrandr -d :0.1
Screen 1: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DVI-D-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 360mm x 270mm
1920x1080 59.94*+
1600x1200 60.00
1280x1024 85.02 75.02
1280x960 85.00 60.00
1280x720 59.94
1152x864 75.00
1024x768 85.00 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x480 59.94 59.94
640x480 75.00 72.81 59.94

Display More

seahawk1986 wrote:

Läuft Openbox für den zweiten Bildschirm?

Code

mod@HTPC-WZ:~$ sudo -u vdr DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/666/bus systemctl --user status openbox-second.service
● openbox-second.service - Start openbox on the second DISPLAY if it exists
Loaded: loaded (/var/lib/vdr/.config/systemd/user/openbox-second.service; ena
Active: active (running) since Sat 2020-07-25 14:10:34 CEST; 18min ago
Process: 1828 ExecStartPost=/bin/bash /var/lib/vdr/.fehbg (code=exited, status
Process: 1827 ExecStartPost=/usr/bin/xset -dpms s off -display $DISPLAY (code=
Main PID: 1826 (openbox)
CGroup: /user.slice/user-666.slice/user@666.service/openbox-second.service
└─1826 /usr/bin/openbox --config-file /var/lib/vdr/.config/openbox/rc

Danke ! (Für mich leider ein spanisches Dorf ...)

seahawk1986 · Jul 26th 2020

Wenn feh erfolgreich ausgeführt wurde, sollte eigentlich zumindest das yaVDR-Logo (kurz) zu sehen sein, bevor der kiosk-browser startet.´

Läuft die Unit osd2web.service denn in der User-Session?

Code

sudo -u vdr DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/666/bus systemctl --user status osd2web.service

rallye · Jul 26th 2020

seahawk1986 wrote:

sollte eigentlich zumindest das yaVDR-Logo (kurz) zu sehen sein

leider nein. Das Logo ist am 2. BS nicht aufgetaucht.

Die Abfrage bezüglich osd2web.service denn in der User-Session liefert

Code

mod@HTPC-WZ:~$ sudo -u vdr DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/666/bus systemctl --user status osd2web.service
● osd2web.service - Start a kiosk browser on the second DISPLAY if it exists
Loaded: loaded (/var/lib/vdr/.config/systemd/user/osd2web.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2020-07-26 13:36:51 CEST; 9min ago
Main PID: 1808 (on_vdr)
CGroup: /user.slice/user-666.slice/user@666.service/osd2web.service
├─1808 /usr/bin/python3 /usr/bin/on_vdr -o -c kiosk-browser "http://localhost:4444/skins/horchiTft/index.html?theme=anthraize&onlyView=1"
└─1812 kiosk-browser http://localhost:4444/skins/horchiTft/index.html?theme=anthraize&onlyView=1

Was mich etwas nachdenklich macht ist das Wording: Start a kiosk browser on the second DISPLAY if it exists Heisst das, dass ich den kiosk browser starten soll oder ist das einfach unglücklich ausgedrückt ?

seahawk1986 · Jul 26th 2020

rallye wrote:

Heisst das, dass ich den kiosk browser starten soll oder ist das einfach unglücklich ausgedrückt ?

Die Unit startet nur, wenn es eine /var/lib/vdr/.second_display gibt und die Datei nicht leer ist (https://github.com/yavdr/yavdr…d/user/osd2web.service.j2). Die Datei wird beim Start der Session angelegt.

Da der Dienst läuft, scheint das schon mal geklappt zu haben.

Share