yavdr 0.6.2 Install hangs with preseed

  • Dear all,

    I am trying to install YAVDR 0.6.2 on an Atom based motherboard wih 32gb SSD.

    The installation is not completing because it hangs on 15% preceed.

    Tried a number of times, different USB flash drives, but it hangs at the same level.

    I have no ideas what to try next.

    Any help will be appreciated.


    Best regards

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • What kind of DVB cards do you have? It may be that the media-drivers are built at that stage and that can take a very long time.

    You can see what happen on the other console (I think it's Alt+F4).


    Lars.

  • Dear Lars,

    Thank you for your rapid reply.

    I am using DD-Cine S2 card.

    The last time I have left the installation for 3 hours before I gave up.

    Have not tried Alt+F4 option but will do in the evening and report back.

    Thanks once again.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,

    The network is working?

    Are there errors in the syslog etc?

    Regards, Stefan

    Test-VDR1: HP rp5700 Fertigsystem, Core2Duo E6400, 2GB RAM, FF-SD C-2300, nvidia Slim-GT218 x1 | easyVDR 2.0 64Bit
    VDR3: in Rente

    VDR4: MSI G31M2 v2, Digitainer2-Geh., t6963c 6" gLCD, E5200, 2GB, 3TB WD Red, GT730, 2x TT S2-3200; easyVDR 3.5 64bit
    VDR5: Gigabyte
    GA-G31M-S2L, Intel E2140, Zotac GT730 passiv, Digitainer2-Geh., t6963c 6 " gLCD, 2 TB WD Red, 2x TT S2-3200 (an 1 Kabel) easyVDR 3.5 64bit
    VDR6:
    Intel E5200, GT630 passiv, F1 750 GB, t6963c gLCD, 2x TT S2-3200 | easyVDR 3.5 64bit
    VDR-User #1068
    www.easy-vdr.de

  • Hi Stefan.

    Yes, the network is connected.

    I didnt knew the alt+F4 option up to this moment so no logs have been examined.


    Best regards,

    Alexander

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi all,

    I have started a new fresh install.

    Almost 2 hours later here is the progress:


    [IMG:https://i.imgur.com/7a9J73w.jpg]


    Is it normal?

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Building the kernel modules from the dkms on a slow system can take some time.

    yaVDR-Dokumentation (Ceterum censeo enchiridia esse lectitanda.)

  • Dear Seahawk,

    Thank you.

    I am going to leave it overnight and will report back in the morning.


    Best regards.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Good morning all.

    The setup completed successfully in the end. It took 6 and a half hours.

    Obviously the Atom CPU was the bottle-neck.

    Thanks to all.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.