triple boot bm2lts , windows and ubuntu , is this possible ?

  • Hi,


    Is there some way of installing bm2lts v2.90 then windows then kubuntu ?


    Dual boot is ok bm2lts with windows or kubuntu but the problem is the partition limit of 4 in mbr.


    Has anybody tried this ?


    Many thanks.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Hi mini73,


    Thanks for replying. Yes , i did go into the bios , changed from legacy to uefi but when rebooting was what looked like a console Command . The pc just does not work .


    Maybe there is a command you need to enter or download ?


    Many thanks again .

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Hi,


    When you load kubuntu or windows with bootable usb in uefi mode the pc goes straight into uefi command shell but the bm2lts is the only one that boots into clonezilla . This is what i do not understand either.


    If bios is set to legacy boot then you get the option to install as well as well as clone. I know nothing about cloning - never done it .


    Thanks.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!