VDR does not handle well TBS 5520SE multiple frontends

  • Hi,


    I know that there is already a subject opened about a similar issue (link), but this one is actually a bit different.

    This card has 2 signal inputs (one for terrestrial and one for Sat).

    At the end, the TBS driver creates only 1 adapter but with 2 frontends.


    VDR seems to discover them well:

    Code
    1. Oct 9 15:16:18 nuc vdr: [11352] probing /dev/dvb/adapter0/frontend0
    2. Oct 9 15:16:18 nuc vdr: [11352] frontend 0/0 provides DVB-T,DVB-T2,DVB-C,ISDBT,DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("TurboSight TBS 5520SE DVB-T/T2/C/C2/ISDB-T")
    3. Oct 9 15:16:18 nuc vdr: [11356] frontend 0/0 tuner thread started (pid=11352, tid=11356, prio=high)
    4. Oct 9 15:16:18 nuc vdr: [11352] probing /dev/dvb/adapter0/frontend1
    5. Oct 9 15:16:18 nuc vdr: [11352] frontend 0/1 provides DVB-S,DVB-S2,DSS with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("TurboSight TBS 5520SE DVB-S/S2/S2X")
    6. Oct 9 15:16:18 nuc vdr: [11359] frontend 0/1 tuner thread started (pid=11352, tid=11359, prio=high)


    The thing is that it does not handle them well.

    When switching from one to the other, it seems to think that there are actually 2 demuxes...



    Has anyone experienced this ?


    Thanks!

  • Thanks I have 'almost' the same issue as described, when using symlinks.


  • Hello,


    I'm using a TBS 6522 Multistandard card. DVB-S is connected on the

    second Input.



    Just to mention....


    best