{stable/develop} BM²LTS v3.1.x NUC - SAT>IP - Based on Ubuntu 18.04.x LTS

  • Dear cinfo,

    the link from the first post says again the access is forbidden.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Thanks,

    working now.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.


  • ss -tnlp

    cinfo

    Thanks cinfo,

    I did what you wrote but here is what I have now for port 2002


    Quote


    ISTEN 0 1 0.0.0.0:2002 0.0.0.0:* users:(("vdr",pid=1182,fd=12))

    I can telnet on port 2002 now but the VDR menu is not presented at all.


    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,


    Quote

    LISTEN 0 1 0.0.0.0:2002 0.0.0.0:* users:(("vdr",pid=1182,fd=12))

    the local host

    127.0.0.1

    is not set --> check / etc / host


    Quote

    LISTEN 0 1 127.0.0.1:2002 0.0.0.0:* users:(("vdr",pid=1193,fd=13))



    Grüße

    cinfo

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8

  • Here is my etc/host file:


    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,


    which BM2LTS version do you use? ---> please use version 3.0.25


    cinfo

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8

  • yes,

    I am on the latest version. The old version was working fine.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,


    is difficult because everything is OK here

    Code
    1. LISTEN 0 1 127.0.0.1:2002 0.0.0.0:* users:(("vdr",pid=1171,fd=22))

    /etc/hosts/

    cinfo

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8

  • Thanks for your efforts.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Dear cinfo,

    one last question regarding this OSD issue:


    I can now successfully telnet on the port but the keyboard presses are not bringing OSD at all.

    This OSD is very important for me because I switched to headless server and I can scan channels only with OSD, as I am not good in console VDR action at all.


    Could you please confirm you have OSD from VDR in telnet at port 2002?

    Do I need any additional plugin enabled to have OSD via telnet?

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,


    I always do it via KODI - see instructions


    Grüße

    cinfo

    Files

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8

  • Hey cinfo,

    Thank yo SO much.

    Finally it is working now.

    This command was new to me. "setup-box"

    Even scanning is working now and the progress is displayed.

    Also magically the telnet on port 2002 is working as well.

    Once again thanks for your hard work and your dedication to the leftovers of the Reelbox community.


    Regards.

    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi cinfo,

    do you know why the system is not finding ant disk shares to be used for recordings? In the previous BM2LTS it was working.

    Now scanning of drive shares says that no disks can be found:



    YaVDR 0.6.2 as a VNSI server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD + MCE Remote for KODI. Streamdev client only.
    4 x KODI - Asus AT3Iont, 2gb RAM, 32gb SSD, MCE Remote @ dBox1 case

    UNRAID - 60tb storage, Supermicro based.

  • Hi,


    Thank you for the latest image.



    The linux-headers-4.18.0-994-generic are missing....

    Where are the headers ?


    Alexandro77 , i think installing the missing headers the system would solve your problem.

    Many thanks .

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.90 proprietary driver


    The post was edited 1 time, last by kdeuser ().

  • Thank you cinfo, i will try your solution.


    :thumbup:

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.90 proprietary driver


  • install

    Code
    1. sudo dpkg -i *.deb

    Grüße

    cinfo

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8

  • Hi cinfo,


    That kernel s also invalid .


    This is the error log :


    error.txt


    Thanks again.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.90 proprietary driver


  • Hi,


    that's your problem

    Code
    1. /tmp/vbox.0/include/iprt/stdarg.h:44:12: fatal error: stdarg.h: No such file or directory

    Grüße

    cinfo

    Server mit Tunerstation: NetCeiver, 5x DVB-S2 extern VDR: Intel NUC i5 Coffee Lake, SSD: 128GB, 8GB RAM Software: Ubuntu 18.04, ReelVDR oder VDR-2.4.0 , Kernel: 4.x NAS: CPU Intel Atom 1.8 GHz, 4GB RAM mit 8 TB Speicher Client1-2: Amazon Fire TV - OLED TV: LG OLED55E8