alsamixer -D hw:1
geht auch
alsamixer -D hw:1
geht auch
alsamixer -c0
ungültige Karten-Nummer: 0
Hmm das ist allerdings komisch. Warum gibt es keine Karte 0. Was gibt denn F6 beim alsamixer -c1 aus
Nur ein eine Karte mit der Anzeige
Zitat- default
- HDA Intel PCH
man kann leider nicht wählen
Karte 1: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
root@BM2LTS64nDD:~# inxi -A
Audio: Card Intel Tiger Lake-LP Smart Sound Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k5.18.17-051817-generic
alsactl init
Found hardware: "HDA-Intel" "Realtek ALC256" "HDA:10ec0256,80863004,00100002 HDA:80862812,80860101,00100000" "0x8086" "0x3004"
Hardware is initialized using a generic method
lspci -v | grep -A7 -i "audio"
00:1f.3 Audio device: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20) (prog-if 80)
DeviceName: Onboard - Sound
Subsystem: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller
Flags: bus master, fast devsel, latency 32, IRQ 183, IOMMU group 14
Memory at 603d1a0000 (64-bit, non-prefetchable) [size=16K]
Memory at 603d000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: snd_hda_intel
Alles anzeigen
Nun ja da es mit Kodi geht möchte ich die Funktion der Karte mal nicht anzweifeln. Allerdings frage ich mich was bei der Initialisierung da schief geht.
Da bräuchte ich mal ein Log mit aktivem DEBUG. Dazu ist die Datei audio.c zu ändern. Siehe oben.
Nun ja da es mit Kodi geht möchte ich die Funktion der Karte mal nicht anzweifeln. Allerdings frage ich mich was bei der Initialisierung da schief geht.
Da bräuchte ich mal ein Log mit aktivem DEBUG. Dazu ist die Datei audio.c zu ändern. Siehe oben.
mache ich dann später nach der Arbeit fertig.
vielleicht sollte man das noch einmal Prüfen, ob man noch options snd-intel-dspcfg dsp_driver=3 mit aufnehmen sollte?
mit z.B.
echo "options snd-intel-dspcfg dsp_driver=3" > /etc/modprobe.d/alsa-base.conf
ZitatDas
snd-intel-dspcfg
Anfang 2020 eingeführte Modul stellt eine API bereit, die von allen Treibern verwendet wird, und der Benutzer kann nun die Standardauswahl durch Festlegen desdsp_driver
Parameters überschreiben. Einstellung zum Beispielermöglicht die Verwendung des HDaudio-Legacy-Treibers. Dies funktioniert normalerweise für Lautsprecher und Kopfhörer/Headsets, ermöglicht jedoch keine DMIC-Erfassung.
Umgekehrt, wenn eine Plattform keine DSP-basierte Plattform erfordert, der DSP aber dennoch vom OEM aktiviert wird, kann der Benutzer oder die Integration die Verwendung des SOF-Linux-Treibers erzwingen.
Nun ja da es mit Kodi geht möchte ich die Funktion der Karte mal nicht anzweifeln. Allerdings frage ich mich was bei der Initialisierung da schief geht.
Da bräuchte ich mal ein Log mit aktivem DEBUG. Dazu ist die Datei audio.c zu ändern. Siehe oben.
Hm,
Aug 25 16:50:26 BM2LTS64nDD vdr[2165]: ALSA lib conf.c:5668:(snd_config_expand) Unknown parameters CARD=PCH,DEV=0
Aug 25 16:50:26 BM2LTS64nDD vdr[2165]: ALSA lib pcm.c:2664:(snd_pcm_open_noupdate) Unknown PCM hdmi:CARD=PCH,DEV=0
Aug 25 16:50:26 BM2LTS64nDD vdr: audio/alsa: playback open 'hdmi:CARD=PCH,DEV=0' error: Das Argument ist ungültig
Aug 25 16:50:26 BM2LTS64nDD vdr: audio/alsa: mixer default - PCM open
Aug 25 16:50:26 BM2LTS64nDD vdr[2165]: ALSA lib dlmisc.c:337:(snd_dlobj_cache_get0) Cannot open shared library libasound_module_ctl_pipewire.so (/usr/local/lib/x8>
Aug 25 16:50:26 BM2LTS64nDD vdr: audio/alsa: can't open mixer 'default'
Aug 25 16:50:26 BM2LTS64nDD vdr: audio: play thread started
Aug 25 16:50:26 BM2LTS64nDD vdr: audio: wait on start condition
wenn ich echo "options snd-intel-dspcfg dsp_driver=3" > /etc/modprobe.d/alsa-base.conf einsetze,
dann kann ich den alsamixer -c0 öffnen und ersieht so aus (siehe Anhang)
root@BM2LTS64nDD:~# alsamixer -c0
root@BM2LTS64nDD:~# aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 0: HDA Analog (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 3: HDMI1 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 4: HDMI2 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: sofhdadsp [sof-hda-dsp], Gerät 5: HDMI3 (*) []
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
root@BM2LTS64nDD:~# lspci -v | grep -A7 -i "audio"
00:1f.3 Audio device: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller (rev 20) (prog-if 80)
DeviceName: Onboard - Sound
Subsystem: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller
Flags: bus master, fast devsel, latency 32, IRQ 183, IOMMU group 14
Memory at 603d1a0000 (64-bit, non-prefetchable) [size=16K]
Memory at 603d000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: sof-audio-pci-intel-tgl
Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
00:1f.4 SMBus: Intel Corporation Tiger Lake-LP SMBus Controller (rev 20)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Tiger Lake-LP SMBus Controller
Flags: medium devsel, IRQ 16, IOMMU group 14
Memory at 603d1ac000 (64-bit, non-prefetchable) [size=256]
root@BM2LTS64nDD:~# dmesg | grep snd
[ 4.875364] snd_sof_pci_intel_tgl: unknown parameter 'model' ignored
[ 4.875369] snd_sof_pci_intel_tgl: unknown parameter 'index' ignored
[ 5.044541] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC256: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 5.044544] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.044546] snd_hda_codec_realtek ehdaudio0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.044547] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0
[ 5.044548] snd_hda_codec_realtek ehdaudio0D0: inputs:
[ 5.093320] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
[ 5.093329] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
Alles anzeigen
Danke, ich gehe davon aus, dass das softhddrm Tonprob beim NUCi11 noch nicht gelöst ist.
Bitte um Info sobald das der Fall ist, denn dann bestelle ich einen NUC11i3. Wir würden damit gerne den NUC10i3 ersetzen.
Danke, ich gehe davon aus, dass das softhddrm Tonprob beim NUCi11 noch nicht gelöst ist.
Bitte um Info sobald das der Fall ist, denn dann bestelle ich einen NUC11i3. Wir würden damit gerne den NUC10i3 ersetzen.
ich denk das wird zur Zeit hier kein Lösung geben -- ich habe keine Zeit mehr für das Testen -- Es wird nur noch etwas wenn jemand testet -- Es sind Tester gesucht -- hier und da mal ein Plugin-Version bauen ist immer möglich.
Danke, ich gehe davon aus, dass das softhddrm Tonprob beim NUCi11 noch nicht gelöst ist.
Bitte um Info sobald das der Fall ist, denn dann bestelle ich einen NUC11i3. Wir würden damit gerne den NUC10i3 ersetzen.
Darf ich dich fragen, warum du den NUC 10i3 gegen den NUCi11 ersetzen möchtest?
rkp: Weil wir schon den 6. NUC10i3 auf Garantie direkt bei Intel getauscht haben (3x bootete er nicht mehr u 3x starteten die Lüfter nach einigen Monaten nicht mehr).
Nachdem die 2 Jahre Amazon "Geld zurück" bald ablaufen, wollen wir nichts mehr riskieren und tauschen ihn gegen den NUC11 od 12 (der wäre besser, kommt aber für uns zu spät zum erschwinglichen Preis)
Außerdem ist die HDMI Ausgabe des NUC11 etwas schärfer.
cinfo: Ich möchte den NUC10 spätestens Anfang Nov. zurück geben. Möglicher Ablauf:
- Bestellung NUC11 im Sept oder Okt
- 30 Tage Zeit f. Tests
Da 30 Tage mitunter schnell rum sind (ich/wir meist nur am WE Zeit haben), wäre es super, wenn du den Fehler mit jojo61 (wenn er wieder zurück ist) zumindest im Ansatz beheben könntest bzw. grob klar ist was zu tun wäre.
Die aktuellen NUC12Pro Geräte haben, zur Zeit, keinen "Consumer Infrared Rx Sensor" mehr
Zitat
(wenn er wieder zurück ist) zumindest im Ansatz beheben könntest bzw. grob klar ist was zu tun wäre.
haben wir, deshalb werden Tester gesucht um das Problem weiter einzugrenzen.
Der NUC11PAHix hat nach der Installation auf dem
HDMI-Port (HDMI 2.0b) und Displayport (USB-C (DP1.2)) eine Tonausgabe -- es ist nur für Benutzer die einen "nativen VDR" haben möchten,
ist noch der ALSA-Ausgang zu finden und im Ausgabe-Plugin zu hinterlegen.
Über Kodi/VDR und MPV wird Ton ausgeben.
Zitatcinfo : Ich möchte den NUC10 spätestens Anfang Nov. zurück geben. Möglicher Ablauf:
- Bestellung NUC11 im Sept oder Okt
- 30 Tage Zeit f. Tests
Ok, schreibe dann wenn Du ein Gerät zum Testen hast
Sep 7 10:45:41 BM2LTS64nDD systemd[1]: Condition check resulted in Save/Restore Sound Card State being skipped.
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.398172] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.398629] evbug: Connected device: input17 (HDA Intel PCH Headphone at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.398658] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.398880] evbug: Connected device: input18 (HDA Intel PCH HDMI/DP,pcm=3 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.398908] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.399115] evbug: Connected device: input19 (HDA Intel PCH HDMI/DP,pcm=7 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.399141] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.399363] evbug: Connected device: input20 (HDA Intel PCH HDMI/DP,pcm=8 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD systemd[1]: Condition check resulted in Manage Sound Card State (restore and store) being skipped.
Sep 7 10:45:41 BM2LTS64nDD systemd[1]: Reached target Sound Card.
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.410963] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify read bytes: 64
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify about to open: /dev/input/event11
Sep 7 10:45:41 BM2LTS64nDD acpid: input layer /dev/input/event11 (HDA Intel PCH HDMI/DP,pcm=9) opened successfully, fd 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.416107] evbug: Connected device: input21 (HDA Intel PCH HDMI/DP,pcm=9 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.418384] iwlwifi 0000:00:14.3: base HW address: f4:4e:e3:de:47:d4
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.424939] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify read bytes: 64
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify about to open: /dev/input/event12
Sep 7 10:45:41 BM2LTS64nDD acpid: input layer /dev/input/event12 (HDA Intel PCH HDMI/DP,pcm=10) opened successfully, fd 17
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify read bytes: 64
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify about to open: /dev/input/event13
Sep 7 10:45:41 BM2LTS64nDD acpid: input layer /dev/input/event13 (HDA Intel PCH HDMI/DP,pcm=11) opened successfully, fd 18
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.427990] evbug: Connected device: input22 (HDA Intel PCH HDMI/DP,pcm=10 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.429788] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.429886] evbug: Connected device: input23 (HDA Intel PCH HDMI/DP,pcm=11 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.429926] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.430063] evbug: Connected device: input24 (HDA Intel PCH HDMI/DP,pcm=12 at ALSA)
Sep 7 10:45:41 BM2LTS64nDD kernel: [ 8.430098] input: HDA Intel PCH HDMI/DP,pcm=13 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify read bytes: 64
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify name len: 16
Sep 7 10:45:41 BM2LTS64nDD acpid: inotify about to open: /dev/input/event14
Sep 7 10:45:41 BM2LTS64nDD acpid: input layer /dev/input/event14 (HDA Intel PCH HDMI/DP,pcm=12) opened successfully, fd 19
...
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr: audio: snd_pcm_hw_params_any: no configurations available: Das Argument ist ungültig
Sep 7 10:45:53 BM2LTS64nDD vdr: audio/alsa: mixer default - PCM open
Sep 7 10:45:53 BM2LTS64nDD vdr: audio/alsa: can't open mixer 'default'
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Sep 7 10:45:53 BM2LTS64nDD vdr[1418]: ALSA lib pcm.c:8622:(snd_pcm_set_params) Broken configuration for PLAYBACK: no configurations available
Sep 7 10:45:53 BM2LTS64nDD vdr: audio: play thread started
Sep 7 10:45:53 BM2LTS64nDD vdr: audio: wait on start condition
Alles anzeigen
ALSA lib pcm_params.c:2226:(snd1_pcm_hw_refine_slave) Slave PCM not usable
Mini IT11 Mini-PC Intel Core i7/i5 der 11. Generation
native VDR-Ausgabe:
Aktuell läuft der Mini PC IT11 - Intel 11th Generation mit einer Tonausgabe im nächsten BM2LTS Image.
Die Tonausgabe erfolgt über den HDMI-Port am Gerät.
Hier wird auch ein neuer Audio-Chip "Realtek ALC269VB" auf dem neuem Mainboard-Layout genutzt
Grüße
cinfo
HI, ist das ein "umgelabelter" NUC und wenn JA welche NUC Type wäre das ?
Der scheint auch keinen CIR (IR-Empfänger) zu haben. (Ich möchte jedenf. wegen der 2 J Rückabwicklungsgarantie beim Amazonshop kaufen).
Die Mainboardbez. würde ev. auch helfen auf den NUC-Typ zu schließen.
Hier eine Übersicht über die NUC Typenbez. u Produktvarianten https://www.intel.de/content/w…/000060119/intel-nuc.html
Bei Intel seh ich jedenfalls keine neuen NUC11 Typen ...
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!