{2024} BM²LTS-v4.4.x-Ubuntu 22.04.4- > DD-NET & NetCeiver

  • Dear cinfo,

    the link from the first post says again the access is forbidden.

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Thanks,

    working now.

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.


  • ss -tnlp

    cinfo

    Thanks cinfo,

    I did what you wrote but here is what I have now for port 2002


    Zitat


    ISTEN 0 1 0.0.0.0:2002 0.0.0.0:* users:(("vdr",pid=1182,fd=12))

    I can telnet on port 2002 now but the VDR menu is not presented at all.


    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hi,


    Zitat

    LISTEN 0 1 0.0.0.0:2002 0.0.0.0:* users:(("vdr",pid=1182,fd=12))

    the local host 127.0.0.1

    is not set --> check / etc / host


    Zitat

    LISTEN 0 1 127.0.0.1:2002 0.0.0.0:* users:(("vdr",pid=1193,fd=13))



    Grüße

    cinfo

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • Here is my etc/host file:


    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hi,


    which BM2LTS version do you use? ---> please use version 3.0.25


    cinfo

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • yes,

    I am on the latest version. The old version was working fine.

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hi,


    is difficult because everything is OK here

    Code
    LISTEN  0   1     127.0.0.1:2002    0.0.0.0:*  users:(("vdr",pid=1171,fd=22))

    /etc/hosts/

    cinfo

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • Thanks for your efforts.

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Dear cinfo,

    one last question regarding this OSD issue:


    I can now successfully telnet on the port but the keyboard presses are not bringing OSD at all.

    This OSD is very important for me because I switched to headless server and I can scan channels only with OSD, as I am not good in console VDR action at all.


    Could you please confirm you have OSD from VDR in telnet at port 2002?

    Do I need any additional plugin enabled to have OSD via telnet?

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hey cinfo,

    Thank yo SO much.

    Finally it is working now.

    This command was new to me. "setup-box"

    Even scanning is working now and the progress is displayed.

    Also magically the telnet on port 2002 is working as well.

    Once again thanks for your hard work and your dedication to the leftovers of the Reelbox community.


    Regards.

    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hi cinfo,

    do you know why the system is not finding ant disk shares to be used for recordings? In the previous BM2LTS it was working.

    Now scanning of drive shares says that no disks can be found:



    Server: YaVDR Ansible VM (VDR 2.4.8) as a VNSI Server and Streamdev Server. DD CINE S2 + 2 x DD Duoflex S2 (6 tuners)

    VDR1 Client- ASUS AT3IONTI, 4gb RAM, 32GB SSD, MCE Remote, Custom case, YAVDR 0.6.2

    VDR2 Client- ASUS AT5IONTI, 4gb RAM, 128GB SSD, MCE Remote, D-Vine 5 HTPC Case, YAVDR Ansible, Ubuntu 20.04.2

    VDR3 Client- Modified Reelbox AVG II with working display: Gigabyte C1037UN-EU + EHD + 4GB ram + 32GB SSD. Streamdev client only.BM2LTS

    UNRAID - 110 TB storage, Supermicro X10SRL -F + Xeon E5-2680 v3 + 256 GB DDR4 ECC Ram.

  • Hi,


    Thank you for the latest image.



    The linux-headers-4.18.0-994-generic are missing....

    Where are the headers ?


    Alexandro77, i think installing the missing headers the system would solve your problem.

    Many thanks .

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


    Einmal editiert, zuletzt von kdeuser ()

  • Thank you cinfo, i will try your solution.


    :thumbup:

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • install

    Code
    sudo dpkg -i *.deb

    Grüße

    cinfo

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • Hi cinfo,


    That kernel s also invalid .


    This is the error log :


    error.txt


    Thanks again.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Hi,


    that's your problem

    Code
    /tmp/vbox.0/include/iprt/stdarg.h:44:12: fatal error: stdarg.h: No such file or directory

    Grüße

    cinfo

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!