Update bios Kontron ktq87 board ?

  • Sorry, my english is not the best:

    Is a "normal" boot from SSD/HDD possible?

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • Your USB flash drive works on an other computer?

    Please note if you prepare the USB flash drive with rufus like described

    Update bios Kontron ktq87 board ?

    the board cant boot in UEFI mode!

    You must boot with USB flash drive in legacy mode!

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • On the other hand you should be able to select the USB flash drive you want boot from in the BIOS if legacay boot is enabled

    Be sure legacy mode is enabled, BIOS -> Main -> Boot Features -> Legacy Boot !

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • Hello test.it


    I format the usb with Rufus install the files from the latest Bios update KTQ8782 in to the usb

    Install usb I get bios screen C:/

    I don't know what needs to be done next

  • Thats not a bios screen, thats a DOS prompt :) looks good for your USB boot!

    You need to execute the upd.bat!

    See readme.txt in .ZiP the file:


    Before executing the upd.bat file (from DOS prompt), please enter BIOS Menu and make the setting

    Advanced > ME Configuration > Intel (R) ME = Disabled.

    When flashing is succesfully completed you will see the text:


    Status : 00.


    Now turn off power for 10 seconds.

    System will reboot a few times within the next approximately one minute. Don't interrupt the system in this phase.

    Reboot into BIOS Main Menu and verify that the Core Version is as expected (like KTQ8718G).

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • ;)

    Copy ALL the files from the ZiP in the root of your USB flash drive.

    Boot from USB flash drive, if you see the DOS prompt type in

    upd.bat

    and press ENTER.

    When flashing is succesfully completed you will see the text:


    Status : 00.


    Now turn off power for 10 seconds.

    System will reboot a few times within the next approximately one minute. Don't interrupt the system in this phase.


    Good luck!

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • You can execute the bad file only if you have a operating system installed correct or not

    The operating system is on your USB flash drive - DOS (Disk Operating System) :tup

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • Hi there,


    years later I got an old but pretty well equipped computer utilizing a Kontron KTQ87 mITX mainboard. Unfortunately Kontron does not provide any BIOS/UEFI update files for this board. I thought things could get easier if I could update the UEFI so maybe the device is able to boot UEFI mode from USB thumb drives afterwards...
    If you all could upload existing UEFI update packages for this board I would really appreciate it.

    Thanks in advance!


    kind regards

    Chris


    [Edit]

    ...and just some seconds later I found how to get what I was looking for: Just use your Windows Explorer and input "ftp://ftp.kontron.com/SBC_Products/EOL_Archive/" into the address bar! :)

    [/Edit]

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!