Update bios Kontron ktq87 board ?

  • Hi maier2505,


    I have 4 ram modules of 4 gb each. If i place 12 gb avg2 works , if i now install all 16 gb the avg2 starts and stops in a loop.


    I think the bios needs to be updated but not too sure how to do this.


    If you have updated the board can you show the way you did the update ?


    Many thanks for your time.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • What does the datasheet dedcribes to update the board?

    VDR_1:

    Asus J3455-M, GT 710, SSD 240GB, 8GB DDR3, 1x DvbSky S950 with yavdr-ansible (testing)

    VDR_2:

    AsRock J3455, GT 710, SSD 120GB + SATA 400GB, 8GB DDR3, 1x DvbSky S952 with yavdr-ansible (testing)

    VDR_3_Testing:

    AtomiPi with Intel Atom x5-Z8350, 2GB DDR3, 16GB eMMC, 1x Sundtekt DVB-S with yavdr-ansible (testing)


  • Hi Diablo,


    Here is the data sheet :



    I have downloaded the bf.exeMB's and SBC's. used to upgrade/modify BIOS on Latest version v7.73 dated 2014-08-13.


    How do you use this ?


    Have also downloaded the actual update (ktq8723.zip) but not sure how to install

    Many thanks.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


    Einmal editiert, zuletzt von kdeuser ()

  • If would suggest to put the zip file onto an usb stick. Generally it should be formatted to fat32. You need to check if the files need to be extracted before. Acc. To my MB an binary file is requiered. Go into your bios and and try to update the bios by it. Todays mainboards normally support a direct update procedure (Ehternet) directly through the BIOS. This is what i asked for. The details you have post is not the datasheet to the mainboard. Its only the history of the bios versions.


    Edit: It could be that the *.exe file requires a Windows OS to be executed, which will maybe start then an update process.

    VDR_1:

    Asus J3455-M, GT 710, SSD 240GB, 8GB DDR3, 1x DvbSky S950 with yavdr-ansible (testing)

    VDR_2:

    AsRock J3455, GT 710, SSD 120GB + SATA 400GB, 8GB DDR3, 1x DvbSky S952 with yavdr-ansible (testing)

    VDR_3_Testing:

    AtomiPi with Intel Atom x5-Z8350, 2GB DDR3, 16GB eMMC, 1x Sundtekt DVB-S with yavdr-ansible (testing)


  • @kdeuser

    create and use a bootable USB stick, for example with freedos:

    https://www.howtogeek.com/1369…a-bootable-dos-usb-drive/

    Extract the ktq8723.zip on the stick, boot from it and execute the Upd.bat

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • test.it and Diablo,


    Many thanks to you both for helping here.


    Still absolutely clueless as to how to go about this.


    Here is the page from kontron , may be you might understand this more :


    https://www.kontron.com/produc…/flex-atx/ktq87-flex.html


    In the datasheet for bios are 4 files or .exe , which one do i use and how do i use it ?


    Completely lost on this , please a step by step way of doing this update .


    Many thanks for your patience.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Hello,


    Things i have tried :


    - the bf.exe7.73 copy/paste into the 8gb fat32 pen drive

    . But what about the other 3 files. They go by 18 21 and 23 . So i download this 23 and where does it go ??????


    I am using a linux based distro called bm2lts and booting into a virtualbox guest windows 7.


    I go into the pen drive where i copy/paste this bf.exe and i can see a flash of black screen . That is it , seriously clueless my friends - completely clueless.:wand

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Download the latest file Firmware.

    There is a readme which tell you how to make it.

    Test.it told you how to create an bootable USB stick with DOS prompt.

    VDR_1:

    Asus J3455-M, GT 710, SSD 240GB, 8GB DDR3, 1x DvbSky S950 with yavdr-ansible (testing)

    VDR_2:

    AsRock J3455, GT 710, SSD 120GB + SATA 400GB, 8GB DDR3, 1x DvbSky S952 with yavdr-ansible (testing)

    VDR_3_Testing:

    AtomiPi with Intel Atom x5-Z8350, 2GB DDR3, 16GB eMMC, 1x Sundtekt DVB-S with yavdr-ansible (testing)


  • Forget VM and on linux u cant execute the *.exe in the right way. I guess you need the "free-dos" usb stick for the executable.

    VDR_1:

    Asus J3455-M, GT 710, SSD 240GB, 8GB DDR3, 1x DvbSky S950 with yavdr-ansible (testing)

    VDR_2:

    AsRock J3455, GT 710, SSD 120GB + SATA 400GB, 8GB DDR3, 1x DvbSky S952 with yavdr-ansible (testing)

    VDR_3_Testing:

    AtomiPi with Intel Atom x5-Z8350, 2GB DDR3, 16GB eMMC, 1x Sundtekt DVB-S with yavdr-ansible (testing)


  • A long time ago, I do not fully remember...


    Basically you have to create a bootable USB stick to be able to run bf.exe from the stick.


    Then also the other files go to a folder on the stick, so you can use them running Bf.exe from the stick.


    I used freeDOS like referenced above...


    This is I remember I did it...


    Best regards

    1x AVG mit KTQ87/i5, 2xAVGmit KTQ77/i5 und BM2LTS last RC, 1x AVGI (BM2LTS2.89), 1x AVGIII (12.12.1), NUC in sporadischer Testphase
    3 ext. Netceiver (3x DVB-C, 5x DVB-S2, 6x DVB_S2)
    QNAP NAS,4x3TB, RAID 6

  • Hi maier2505,


    Bios update was successful , many thanks to yourself , Diablo and test.it.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • Hi MC1,


    ktq8723.zip


    Good luck.

    AVG2l : 1 x Kingston 120 gb ssd, 1 x seagate 4tb, 1 x toshiba 3tb
    VDR : 1.7.29.9
    IMAGE : BM2LTS v2.90
    Kontron ktq87 motherboard , i7-4770s Processor , Crucial 1600mhz 16gb ram , Internal netciever
    Using original avg2 frontpanel , COM port and Remote Control

    GPU : msi 1050 Ti 4gb Low Profile using Nvidia 384.130 proprietary driver


  • The latest is KTQ8782.zip from kontrons "EOL ARCHIVE – MOTHERBOARDS & SBC"

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

  • you have a PM....

    easyVDR-1: DFi SD106, i3-7100T, PCIe Bifurcation: Asus NVIDIA GT 630 Rev. 2, & DD Octopus LE Bridge 2x DuoFlex v2, Noritake GU256x64D-3900B VFD , passiv gekühlt
    yaVDR2: Kontron KTQM67mITX, i7-3520M, 4GB DDR3, Asus NVIDIA GT 630 Rev. 2, Noritake GU256x64D-3900B VFD, SAT>IP
    easyVDR-2: bcm MX3150N, Pentium N3700, 4GB DDR3, ZOTAC GeForce GT 730 1x PCI-E, Sat>IP, Noritake GU256x64-372 VFD

    UP2VDR: UP Squared in Nexcom Nise 101 Gehäuse, Futaba VFD, passiv gekühlt
    SAT>iP: DD Octopus NET V2, Max A8, in Nexcom Nise 101 Gehäuse, semipassiv gekühlt

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!