CT 2017-2 Artikel SATIP Megasat SAT to IP Server 3 - Erfahrungen?

  • Kleine Frage zum Digitbit R1 (mit satip-axe) ... was wählt man da am Besten aus? MINISATIP7 oder MINISATIP8? Also in Kombination mit VDR und satip-plugin natürlich ...


    Danke und schöne Grüße,

    Space

  • Ich hab das Dingen letztes Jahr im Frühjahr mit 7 auf den Dachboden gelegt und seitdem nicht wieder angefasst und auch keine Probleme bislang.


    Für mich gibt es keinen Grund auf 8 zu wechseln.

    Client 1 Hardware : MSI Z87-G43, I5-4570, 4 GB Ram (oversized aber war über :) ),Zotac NVidia GT630 (25 Watt),Thermaltake DH202 mit iMon-LCD ( 0038 ) und vdr-plugin-imon
    Software : yaVDR 0.6,sofhhddevice @ 1920x1080@50Hz
    Server Hardware : MSI Z87-G43, I7-4790, 16 GB RAM, 5x3 TB WD Red, Digibit-R1 (2 Devices)
    Software : Ubuntu 16.04 LTS mit yavdr-Paketen,virtualbox,diverse VM's


    Yoda: Dunkel die andere Seite ist...sehr dunkel!
    Obi-Wan: Mecker nicht, sondern iss endlich dein Toast ...

  • Danke! Dann werde ich jetzt mal 7 testen ... mit 8 hatte ich nämlich leichte Bildstörungen ... mal schauen, ob die mit 7 weg sind :)


    Schöne Grüße,


    Space

  • Was man häufig mit den Digibits und Clones liest - zwischen Digibit und eigentlichem VDR sollte möglichst keine Fritzbox liegen. Also die Fritzbox nutzen ist ne schlechte Idee. Kann ich von meiner Seite aus nicht bestätigen da alles über nen 24er GB-Switch läuft und die Fritzbox auch nur einen Port darauf belegt.


    Die Störungen machen sich wohl in gelegentlichen Bildaussetzern bemerktbar - mag zu deinem Fehlerbild passen.


    RTP über TCP hat übrigens bei mir nicht richtig funktioniert.

    Client 1 Hardware : MSI Z87-G43, I5-4570, 4 GB Ram (oversized aber war über :) ),Zotac NVidia GT630 (25 Watt),Thermaltake DH202 mit iMon-LCD ( 0038 ) und vdr-plugin-imon
    Software : yaVDR 0.6,sofhhddevice @ 1920x1080@50Hz
    Server Hardware : MSI Z87-G43, I7-4790, 16 GB RAM, 5x3 TB WD Red, Digibit-R1 (2 Devices)
    Software : Ubuntu 16.04 LTS mit yavdr-Paketen,virtualbox,diverse VM's


    Yoda: Dunkel die andere Seite ist...sehr dunkel!
    Obi-Wan: Mecker nicht, sondern iss endlich dein Toast ...

  • Bei mir hängen Digibit und VDR auch am gleichen Procurve und die Fritzbox ist außen vor. Muß mal schauen, was ich als Protokoll eingestellt habe.


    Danke schonmal für die Hinweise!

  • Dear Mr. Rocha,


    our SAT> IP Server supported DVB-S and DVB-S2 signals into 24 independent IP data streams.


    On following link you can find all information and manual about the EXIP 4124.


    EXIP 4124 -> https://www.kathrein.de/en/sat/product/20510136-1/


    Our LNB UAS 584 in conjunction with our EXD 1532 single-cable multi-switch is ready to be used in all 24 streams of the EXIP 4124.


    EXD 1532 -> https://www.kathrein.de/en/sat/product/20510104-1/


    UAS 584 (with other quatro LNBs possible) -> https://www.kathrein.de/en/sat/product/20110019-1/


    The EXIP 4124 (SAT> IP) does not transmit the complete transponder (about 60 Mbit / s by transponder), it always sends a channel to the device (client).


    This puts a maximum of 20 Mbps on stream on the network.


    Rate SAT> IP per stream


    SD Channel: between 2 Mbit and 7 Mbit

    HD Channel: between 5 Mbit and 20 Mbit


    For more information, see SAT> IP specification.


    http://www.satip.info/resources

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!