Hallo,
nach einer Neuinstallation hab ich versucht mein glcd2usb Display wieder ans laufen zu bekommen.
so habe ich installiert (so hab ichs unter 0.4 gemacht)
cd /usr/src/
sudo su
apt-get install vdr-plugin-graphlcd
apt-get install subversion
svn co https://serdisplib.svn.sourceforge.net/svnroot/serdisplib/serdisplib/trunk serdisplib-2.x_svn
cd serdisplib-2.x_svn
apt-get install libusb-dev
./configure
make
make install/etc/vdr/conf.d/50-graphlcd.conf
[graphlcd]
-c /etc/graphlcd.conf -d simlcd -s glcd2usbnano /etc/graphlcd.conf
ZitatAlles anzeigen[serdisp]
Driver=serdisp
# Controller
# Select the serdisplib name of your display.
# Possible values: See README in serdisplib package or http://serdisplib.$
#Controller=nokia7110
#Controller=sed1335
#Controller=optrex323
Controller=glcd2usb
# Options
# Pass display specific option
# Possible values: See driver-specific hardware page at http://serdisplib$
#
# IMPORTANT: when using generic controllers like sed1330,sed1335,t6963c, $
# need to be set here (if different from default settings)!
# (serdisplib needs to be extended to be able to use 'Width' a$
# settings directly - this will be added later)
#
#Options=MODE=8080
#Options=DELAY=2000;FONTWIDTH=8;CHECK=1
#Options=WIDTH=128;HEIGHT=64
#Options=WIDTH=128;HEIGHT=64;DELAY=2000;FONTWIDTH=8;CHECK=1
# Wiring
# Select Wiring
# Possible values: See driver-specific hardware page at http://serdisplib$
#Wiring=1
#Wiring=PowerLCD
#Wiring=DATA8,CS:nAUTO,A0:INIT,WR:nSTRB,RD:nSELIN
# FGColour
# Drawing colour for non-monochrome displays
# Possible values: 0xRRGGBB (eg.: 0xFF0000)
# Defaults to black (0x000000) if not set
#FGColour=0x000000
# BGColour
# Background colour for non-monochrome displays
# Possible values: 0xRRGGBB (eg.: 0x00FFFF)
# Defaults to white (0xFFFFFF) if not set
#BGColour=0xFFFFFF
#Device=/dev/ttyACM0
#Port=0x378
#UpsideDown=no
#Invert=no
#Contrast=5
Backlight=yes
Backlightlevel=255
Brightness=100
# Settings 'Width' and 'Height' are ignored at the moment. For generic controll$
##Width=240
##Height=128
...
/etc/udev/rules.d/99-glcd2usb.rules erstellen
Zitat# GLCD2USB usb modull
ATTRS{idVendor}=="1c40", ATTRS{idProduct}=="0525", GROUP="uucp", MODE="0660"
nano /etc/group
uucp:x:10:vdrcat /var/log/syslog | grep "glcd"
Jan 6 16:35:10 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/DAS_ERSTE_l.glcd'
Jan 6 16:35:53 mario vdr: [3163] glcd_display thread ended (pid=3143, tid=3163)
Jan 6 16:36:32 mario kernel: [ 2.143085] usb 2-2: Manufacturer: www.harbaum.org/till/glcd2usb
Jan 6 16:36:32 mario kernel: [ 12.431933] hid-generic 0003:1C40:0525.0003: hiddev0,hidraw2: USB HID v1.01 Device [www.harbaum.org/till/glcd2usb GLCD2USB] on usb-0000:00:1d.0-2/input0
Jan 6 17:14:10 mario kernel: [ 2.607087] usb 2-2: Manufacturer: www.harbaum.org/till/glcd2usb
Jan 6 17:14:10 mario kernel: [ 13.640132] hid-generic 0003:1C40:0525.0001: hiddev0,hidraw2: USB HID v1.01 Device [www.harbaum.org/till/glcd2usb GLCD2USB] on usb-0000:00:1d.0-2/input0
Jan 6 17:14:23 mario vdr: [1610] glcd_display thread started (pid=1188, tid=1610, prio=high)
Jan 6 17:14:24 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/skins/glcd2usb/symbols/empty.pbm' loaded.
Jan 6 17:14:24 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/_l.glcd' loaded.
Jan 6 17:14:24 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/_l.glcd'
Jan 6 17:14:26 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/RTL_TELEVISION_l.glcd' loaded.
Jan 6 17:14:26 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/RTL_TELEVISION_l.glcd'
Jan 6 17:14:26 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/skins/glcd2usb/symbols/teletext.pbm' loaded.
Jan 6 17:14:26 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/skins/glcd2usb/symbols/dolby.pbm' loaded.
Jan 6 17:23:17 mario showpic: serdisp: SerDisp with glcd2usb initialized.
Jan 6 17:23:17 mario showpic: glcdgraphics: image '/var/lib/vdr/plugins/graphlcd/logos/channels/TV_BERLIN_l.glcd' loaded.
Jan 6 17:41:55 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/HESSEN_FERNSEHEN_l.glcd' loaded.
Jan 6 17:41:55 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/HESSEN_FERNSEHEN_l.glcd'
Jan 6 17:41:57 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/ZDF_l.glcd' loaded.
Jan 6 17:41:57 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/ZDF_l.glcd'
Jan 6 17:41:59 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/RTL_2_l.glcd' loaded.
Jan 6 17:41:59 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/RTL_2_l.glcd'
Jan 6 17:42:00 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/SAT.1_l.glcd' loaded.
Jan 6 17:42:00 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/SAT.1_l.glcd'
Jan 6 17:42:00 mario vdr: glcdgraphics: image '/usr/share/vdr/plugins/graphlcd/logos/channels/PRO_SIEBEN_l.glcd' loaded.
Jan 6 17:42:00 mario vdr: INFO: graphlcd: successfully loaded image '/usr/share/vdr/plugins/graphlcd/logos/channels/PRO_SIEBEN_l.glcd'nur leider ist auf dem Display außer dem geladenem Showpic nichts zu sehen, das Display zeigt nach dem Start nur den Bildschirmschoner.....was mache ich falsch?
Gruß Mario
