Kodi => Audio passthrough

  • Hi !


    Ich hab yavdr eingerichtet und hab auch den DD Ton via pulseaudio und HDMI am AV-Receiver.
    Wenn ich jetzt Kodi starte und einen Film mit DD anschaue kriege ich aber nur Stereo. Im FIlm bei den Audio settings steht er auf passthrough.
    Beim Generellen Audio Setup kann ich waehlen zwischen 3 optionen.
    (mal sehn ob ich das aus dem Kopf hinkriege)
    Pulseautio => kein Ton
    HDMI Stereo/pulseaudio => Stereoton
    nochwas anderes das ist aber die onboard Soundkarte.
    Muss ich beim vdr bei Pulseaudio noch was anders einstellen ?


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Moin,


    ich vermute mal, dass dein Kodi noch nicht für passthrough konfiguriert ist.
    Unter Settings -> System -> Audio Outputs (Settings Level Expert) solltest du dir mal die möglichen Parameter
    ansehen und das für dich richtige einstellen - also alles ab 'Enable Passthrough'.


    Cheers,
    Ole

  • Wenns denn da waere haette ich es ja eingestellt :)

    Bilder

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Hallo,
    das sah bei mir auch so aus. Habe dann wochenlang rumexperimentiert und nur rein zufällig festgestellt, daß es mit der

    Code
    /usr/share/pulseaudio/alsa-mixer/profile-sets/extra-hdmi.conf


    zu tun hat.
    Wenn ich die originale von Pulseaudio verwende, dann ist die Passthrough Option von Kodi vorhanden.
    Wenn die in Verwendung ist, die von yaVDR installiert wird, ist die Passthrough Option weg.
    Habe jetzt noch keine Zeit gefunden, die Sache näher zu untersuchen, vielleicht ist es aber ein Anhaltspunkt.


    Uwe

  • Wenn ich die originale von Pulseaudio verwende, dann ist die Passthrough Option von Kodi vorhanden.


    Hallo Uwe,


    kannst du mal deine default.conf posten?


    Gruß


    Murry

  • Hallo!


    Wenn ich pulseaudio verwende bekomme ich kein passthrough angeboten. Wenn ich im vdr jedoch bevor ich nach kodi wechsel den spdif-Ausgang benutze, wird mir dieser auch in Kodi angeboten. Wenn ich dies nicht mache habe ich nur analog-stereo auf dem pulse Ausgang, obwohl ich beim vdr start das card-profil setze.


    Gruß


    Murry

  • So jetzt geht es auch bei mir.


    Via pluscontrol folgendes einstellen:


    wechsel Kartenprofil: output:iec958:stereo
    setze Passtrough-Formate für alsa_output.....iec958-stereo: ac3-iec61937: ja
    dts-iec61937: ja


    Dann wird unter Kodi auch passthrough angeboten.


    Gruß


    Murry


    Edit: Genauere Einstellungsangaben.

    Einmal editiert, zuletzt von Murry ()

  • Werd es die Tage mal testen... VDR steht inner Ecke... WZ krieg ne komplettrenovierung


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Hi !


    Code
    output:iec958:stereo


    Den gibts bei mir nicht..... och ha hdmi.stereo.extra1 ansonsten hab ich keinen Ton im VDR


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Den gibts bei mir nicht..... och ha hdmi.stereo.extra1 ansonsten hab ich keinen Ton im VDR


    Bei dir dann


    setze Passtrough-Formate für alsa_output.....hdmi.stereo.extra1:


    ac3-iec61937: ja
    dts-iec61937: ja


    Gruß


    Murry

  • hi !


    Tja.... das war schon immer so denn beim VDR gehts ja....


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Hi !


    Ich hab jetzt auf alsa umgestellt vdr geht, aber bei kodi kriege ich jetzt überhaupt keinen Ton mehr... :(


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

  • Hat wirklcih keiner ne Idee ? Ich dachte mit Alsa sollte es zumindest wieder gehen wie bei der 0.5,
    Aber jetzt hab ich beim VDR Ton und bei Kodi nix...


    Gruss Gerd

    vdr => p8b75-m lx / pentium g2020t / 8 GB Ram / zotac gt 630 / cine S2 V5.5 / 60 gb ocz ssd / 640 gb wd scorpio blue / display noritake 256x64-3900 / chenbro PC71023 gehaeuse / yavdr stable / softhddevice


    spielsystem => p8b75-m le / intel core i3 3220T / ubuntu lts 14.04 / 16 GB ram / zotac gt 630 / cine S2 V6.2 / yavdr stable pakete / softhddevice / pulseaudio+alsa


    spielwiese => Zotac Zbox ID45 / 120 GB mSATA / via Satip => Octopus Net / yavdr stable / softhddevice

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!