Hi,
ich bekomme meine FB nicht mehr richtig zum laufen. Ich habe mir eine eigene rc-medion-x10-or2x angelegt und diese unter /etc/rc_keymaps/rc-medion-x10-mod abgelegt.
Zusätzlich natürlich das template für /etc/rc_maps.cfg angelegt (und process-template /etc/rc_maps.cfg aufgerufen):
Diff
root@vdr:~# diff -Nru /usr/share/yavdr/templates/etc/rc_maps.cfg/80_medion_x10 /etc/yavdr/templates_custom/etc/rc_maps.cfg/80_medion_x10
--- /usr/share/yavdr/templates/etc/rc_maps.cfg/80_medion_x10 2016-01-15 19:26:41.000000000 +0100
+++ /etc/yavdr/templates_custom/etc/rc_maps.cfg/80_medion_x10 2015-07-26 15:07:09.000000000 +0200
@@ -1,4 +1,6 @@
-ati_remote rc-medion-x10 /lib/udev/rc_keymaps/rc-medion-x10
-ati_remote rc-medion-x10-or2x /lib/udev/rc_keymaps/rc-medion-x10-or2x
+#ati_remote rc-medion-x10 /lib/udev/rc_keymaps/rc-medion-x10
+ati_remote rc-medion-x10 /etc/rc_keymaps/rc-medion-x10-mod
+#ati_remote rc-medion-x10-or2x /lib/udev/rc_keymaps/rc-medion-x10-or2x
+ati_remote rc-medion-x10-or2x /etc/rc_keymaps/rc-medion-x10-or2x-mod
ati_remote rc-medion-x10-digitainer /lib/udev/rc_keymaps/rc-medion-x10-digitainer
Alles anzeigen
nach einem Neustart geht die FB aber nicht, obwohl ir-keytable das Ausgibt:
Code
root@vdr:~# ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event3) with:
Driver ati_remote, table rc-medion-x10-or2x
Supported protocols: other
Enabled protocols:
Name: X10 WTI RF receiver
bus: 3, vendor/product: 0bc7:0006, version: 0x0200
Repeat delay = 500 ms, repeat period = 125 ms
erst nach dem ich das ausführe geht die FB (trotz fehler):
Code
ir-keytable -c -w /etc/rc_keymaps/rc-medion-x10-or2x-mod
Read rc-medion-x10 table
Old keytable cleared
Wrote 53 keycode(s) to driver
/sys/class/rc/rc0//protocols: Invalid argument
Couldn't change the IR protocols
früher hatte das alles noch so funktioniert... aber jetzt.. k.a. was da faul ist?
Vielleicht hat wer eine Idee?
Gruß