AVG2 wifi ?

Hi seahawk1986,

I had another look at :

https://www.debian.org/doc/manuals/debia…ce/ch05.en.html

Totally lost on that , no idea on what to do even though it is being explained .

Need guidance if i should delete everything in /etc/networks/interfaces and what should i put in there.

You must understand have extremely basic knowledge of linux.

As the Fritz costs 30 euros and there is a good explanation of how to connect , i have gone ahead and bought it.

Hopefully will be with me by next week.

In the mean time please feel free to resolve the existing pci-e mini wifi issue.

Kind Regards.

Hi cinfo,

Thanks, just want to be sure :

24 wpa-ssid clone
25 WPA-PSK 7,858,501,234,567,816,954th

My test will be :

24 wpa-ssid MOVISTAR_7652
25 WPA-PSK test1234

Is this correct ?

Thanks.

Hi cinfo,

There must be an incompatibility issue with the wireless card and bm2lts. The wifi works fine with old AVG2 image 12.12.1.

My wireless card mini pci-e card :

Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)

My /etc/networks/interfaces :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
#
# WARNING: This file is auto-generated by the ReelBox setup, so you
# should not edit it manually. Use the setup menu instead.
#
# The loopback network interface
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp

auto wlan0
iface wlan0 inet dhcp
wpa-ssid MOVISTAR_7652
WPA-PSK 12345678

auto eth0.2
inet dhcp iface eth0.2

-------------------------------------------------

As soon as i save this, AVG2 does not work anymore !

You have to unplug from the main switch and connect ethernet cable.

The script also says that it should not be modified manually because AVG2 auto generates this.

I think this is also a reason wifi is not working.

Ok , next week i will have Fritz and hopefully wifi .

Thanks again for your time and trouble.

Hi cinfo,

The google translate is bad here :

first make you a interfaces that goes well with your NetCeiver

and then complete the file interfaces with:

I just do not understand , i am so sorry.

Hi cinfo,

How do you change vlan for netceiver ?

I have changed so many things here i am lost ........

I tested Ubuntu 15.04 live cd - wifi works and also 12.12.1

The problem is with bm2lts .

Thanks.

Hi cinfo,

You have tested wifi on your nuc not with AVG2....

Please put me in contact with a user who uses wifi with AVG2 not nuc,

Many Thanks.

Hi,

Success at last , wifi works .

The solution is simple in the end :

The following lines are placed at the end of /etc/network/interfaces :

auto wlan0iface wlan0 inet dhcpWPA-SSID MOVISTAR_7652WPA-PSK 12345678

- MOVISTAR_7652 = ssid / your network name
- 12345678 = your code

Thanks again for your patience cinfo .

Hi cinfo,

I succeeded with wpa but not with wpa2.

WPA2 wifi is working and netceiver is ok and vdr in AVG2 display but no picture on tv.

reel@BM2LTSR66RBin:/media/hd/home/reel$ iwconfig
tun0  	no wireless extensions.


wlan0 	IEEE 802.11bg  ESSID:"MOVISTAR_7652"  
      	Mode:Managed  Frequency:2.462 GHz  Access Point: F8:63:94:AC:76:5B   
      	Bit Rate=36 Mb/s   Tx-Power=20 dBm   
      	Retry short limit:7   RTS thr:off   Fragment thr:off
      	Power Management:off
      	Link Quality=64/70  Signal level=-46 dBm  
      	Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
      	Tx excessive retries:3  Invalid misc:102   Missed beacon:0


lo    	no wireless extensions.


eth0  	no wireless extensions.


eth1  	no wireless extensions.


reel@BM2LTSR66RBin:/media/hd/home/reel$

Thanks.

Hi ,

Thanks for the script, i put it at the end of :

/etc/networks/interfaces

Ehd has orange light now - no vdr - waiting ( bm2lts welcome ).

I have vdr v 1.7.29

Wifi works without waiting from xfce.

Where is the wifi icon/sign so you can switch of and on.

My ( etc/network/interfaces :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
#
# WARNING: This file is auto-generated by the ReelBox setup, so you
# should not edit it manually. Use the setup menu instead.
#
# The loopback network interface
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0

auto eth0
iface eth0 inet manual
up ifconfig eth0 up

auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp

auto wlan0
iface wlan0 inet dhcp
wpa-ssid MOVISTAR_7652
wpa-psk 12345678

auto br0
iface br0 inet manual
up ifconfig br0 up
bridge_ports eth1
bridge_maxwait 3

Thanks.

Hi ,

The ehd heat sink was not fixed properly . Glued the heat sink back and it seems my wifi is back.
WPA2 is working well too.

However, i would like a gui app on my desktop so i can disconnect .

Regards.