Alles anzeigenDecided to give Vbox a try.
Lan adapter 1 and 2 are bridged.
[Blockierte Grafik: http://i.imgur.com/FVncHeC.png]
[Blockierte Grafik: http://i.imgur.com/0mqlqjx.png]
Successfully Installed BM2LTS->Route66->Step1->Step2.
On Step2 I chose "VDR with an external netceiver".
I do not have vlan. The netceiver is attached directly to one of the switches in my home network.
Unfortunately the netceiver is not detected by BM2LTS.Here is how my etc/network/interfaces file look like:
I think that the problem is somewhere in the network settings but due to no "reelbox" GUI can not debug it.
Any advice would be highly appreciated.
It is possible to switch off VLAN usage in the Network settings !
Be sure that you do not have a WLAN Router in the Network, without VLAN it is quite usual that at least the WLAN will go down, most often the whole network.