[gelöst] vdr-plugin-squeezebox und PROBLEME MIT PULSEAUDIO

hotzenplotz5 · 20. November 2014

horchi danke auch soweit fürs plugin !

ich hab ein kleines problem hier mit dem ton. es kommt keiner

vdr läuft hier mit trusty und pulseaudio.

Code

aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0

Alles anzeigen

Code

squeezelite -l
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  pulse                          - PulseAudio Sound Server
  default                        - Playback/recording through the PulseAudio sound server
  sysdefault:CARD=PCH            - HDA Intel PCH, ALC892 Analog - Default Audio Device
  front:CARD=PCH,DEV=0           - HDA Intel PCH, ALC892 Analog - Front speakers
  surround40:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 4.0 Surround output to Front and Rear speakers
  surround41:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  iec958:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Digital - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=PCH,DEV=0            - HDA Intel PCH, ALC892 Analog - Direct sample mixing device
  dmix:CARD=PCH,DEV=1            - HDA Intel PCH, ALC892 Digital - Direct sample mixing device
  dmix:CARD=PCH,DEV=2            - HDA Intel PCH, ALC892 Alt Analog - Direct sample mixing device
  dsnoop:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Analog - Direct sample snooping device
  dsnoop:CARD=PCH,DEV=1          - HDA Intel PCH, ALC892 Digital - Direct sample snooping device
  dsnoop:CARD=PCH,DEV=2          - HDA Intel PCH, ALC892 Alt Analog - Direct sample snooping device
  hw:CARD=PCH,DEV=0              - HDA Intel PCH, ALC892 Analog - Direct hardware device without any conversions
  hw:CARD=PCH,DEV=1              - HDA Intel PCH, ALC892 Digital - Direct hardware device without any conversions
  hw:CARD=PCH,DEV=2              - HDA Intel PCH, ALC892 Alt Analog - Direct hardware device without any conversions
  plughw:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Analog - Hardware device with all software conversions
  plughw:CARD=PCH,DEV=1          - HDA Intel PCH, ALC892 Digital - Hardware device with all software conversions
  plughw:CARD=PCH,DEV=2          - HDA Intel PCH, ALC892 Alt Analog - Hardware device with all software conversions
  hdmi:CARD=NVidia,DEV=0         - HDA NVidia, HDMI 0 - HDMI Audio Output
  hdmi:CARD=NVidia,DEV=1         - HDA NVidia, HDMI 1 - HDMI Audio Output
  dmix:CARD=NVidia,DEV=3         - HDA NVidia, HDMI 0 - Direct sample mixing device
  dmix:CARD=NVidia,DEV=7         - HDA NVidia, HDMI 1 - Direct sample mixing device
  dsnoop:CARD=NVidia,DEV=3       - HDA NVidia, HDMI 0 - Direct sample snooping device
  dsnoop:CARD=NVidia,DEV=7       - HDA NVidia, HDMI 1 - Direct sample snooping device
  hw:CARD=NVidia,DEV=3           - HDA NVidia, HDMI 0 - Direct hardware device without any conversions
  hw:CARD=NVidia,DEV=7           - HDA NVidia, HDMI 1 - Direct hardware device without any conversions
  plughw:CARD=NVidia,DEV=3       - HDA NVidia, HDMI 0 - Hardware device with all software conversions
  plughw:CARD=NVidia,DEV=7       - HDA NVidia, HDMI 1 - Hardware device with all software conversions

Alles anzeigen

/etc/default/squeezelite

Code

# ALSA output device:
SL_SOUNDCARD="pulse"

/var/lib/vdr/setup.conf

Code

squeezebox.audioDevice = pulse

ich hab schon mehrere varianten versucht keine geht .... also auch plughw:CARD=NVidia,DEV=7

speaker-test -c 2 -r 48000 -D hw:1,7

liefert mir tatsächlich ton bei gestoppten vdr
frontend ist softhddevice.

hotzenplotz5 · 21. November 2014

starte ich squeezelite bei gestoppten vdr :

squeezelite -o plughw:CARD=NVidia,DEV=7

und starte danach vdr, dann habe ich keinen ton bei tv, dafür aber ton im squeezelite plugin.

seahawk1986 · 21. November 2014

Welche Ausgabegeräte zeigt er denn mit "squeezelite -l" an?
Was passiert, wenn wenn du squeezelite mit -o pulse bzw. -o default startest? Können dann sowohl der VDR als auch squeezelite etwas ausgeben?

hotzenplotz5 · 21. November 2014

squeezelite -l steht oben 1. beitrag.
also :

Code

squeezelite -l
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  pulse                          - PulseAudio Sound Server
  default                        - Playback/recording through the PulseAudio sound server
  sysdefault:CARD=PCH            - HDA Intel PCH, ALC892 Analog - Default Audio Device
  front:CARD=PCH,DEV=0           - HDA Intel PCH, ALC892 Analog - Front speakers
  surround40:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 4.0 Surround output to Front and Rear speakers
  surround41:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=PCH,DEV=0      - HDA Intel PCH, ALC892 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  iec958:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Digital - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=PCH,DEV=0            - HDA Intel PCH, ALC892 Analog - Direct sample mixing device
  dmix:CARD=PCH,DEV=1            - HDA Intel PCH, ALC892 Digital - Direct sample mixing device
  dmix:CARD=PCH,DEV=2            - HDA Intel PCH, ALC892 Alt Analog - Direct sample mixing device
  dsnoop:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Analog - Direct sample snooping device
  dsnoop:CARD=PCH,DEV=1          - HDA Intel PCH, ALC892 Digital - Direct sample snooping device
  dsnoop:CARD=PCH,DEV=2          - HDA Intel PCH, ALC892 Alt Analog - Direct sample snooping device
  hw:CARD=PCH,DEV=0              - HDA Intel PCH, ALC892 Analog - Direct hardware device without any conversions
  hw:CARD=PCH,DEV=1              - HDA Intel PCH, ALC892 Digital - Direct hardware device without any conversions
  hw:CARD=PCH,DEV=2              - HDA Intel PCH, ALC892 Alt Analog - Direct hardware device without any conversions
  plughw:CARD=PCH,DEV=0          - HDA Intel PCH, ALC892 Analog - Hardware device with all software conversions
  plughw:CARD=PCH,DEV=1          - HDA Intel PCH, ALC892 Digital - Hardware device with all software conversions
  plughw:CARD=PCH,DEV=2          - HDA Intel PCH, ALC892 Alt Analog - Hardware device with all software conversions
  hdmi:CARD=NVidia,DEV=0         - HDA NVidia, HDMI 0 - HDMI Audio Output
  hdmi:CARD=NVidia,DEV=1         - HDA NVidia, HDMI 1 - HDMI Audio Output
  dmix:CARD=NVidia,DEV=3         - HDA NVidia, HDMI 0 - Direct sample mixing device
  dmix:CARD=NVidia,DEV=7         - HDA NVidia, HDMI 1 - Direct sample mixing device
  dsnoop:CARD=NVidia,DEV=3       - HDA NVidia, HDMI 0 - Direct sample snooping device
  dsnoop:CARD=NVidia,DEV=7       - HDA NVidia, HDMI 1 - Direct sample snooping device
  hw:CARD=NVidia,DEV=3           - HDA NVidia, HDMI 0 - Direct hardware device without any conversions
  hw:CARD=NVidia,DEV=7           - HDA NVidia, HDMI 1 - Direct hardware device without any conversions
  plughw:CARD=NVidia,DEV=3       - HDA NVidia, HDMI 0 - Hardware device with all software conversions
  plughw:CARD=NVidia,DEV=7       - HDA NVidia, HDMI 1 - Hardware device with all software conversions

Alles anzeigen

Zitat

Was passiert, wenn wenn du squeezelite mit -o pulse bzw. -o default startest? Können dann sowohl der VDR als auch squeezelite etwas ausgeben?

Code

squeezelite -o default
[09:38:20.815410] test_open:124 playback open error: Connection refused

Code

squeezelite -o pulse 
[09:38:08.031129] test_open:124 playback open error: Connection refused

aber ich hab das auch in xbmc das problem.
also mit xsqueeze kein tonn egal ob squeezeslave oder squeezelite

seahawk1986 · 21. November 2014

Ist dein User Mitglied in der Gruppe pulse-access?

hotzenplotz5 · 21. November 2014

hm ich dachte wenn man das plugin über vdr startet dann sollte das doch "vdr" sein ?
der ist mitglied sonst hätte ich ja keinen ton in vdr ? oder xbmc.

hotzenplotz5 · 21. November 2014

pulse-access:x:116:vdr

seahawk1986 · 21. November 2014

Ich habe das gerade mal auf einem Test-Rechner ausprobiert, kann das Problem aber nicht nachvollziehen
Die Einstellungen sehen bei mir so aus:

Code

$ grep squeeze /var/lib/vdr/setup.conf
squeezebox.alsaOptions =
squeezebox.audioDevice = pulse
squeezebox.lmcHost = localhost
squeezebox.lmcHttpPort = 9000
squeezebox.lmcPort = 9090
squeezebox.logLevel = localhost
squeezebox.playerMac = 00:13:d4:fa:eb:f5
squeezebox.playerName = VDR-squeeze
squeezebox.shadeLevel = 40
squeezebox.shadeTime = 0
squeezebox.squeezeCmd = /usr/bin/squeezelite

Alles anzeigen

Ändern musste ich neben dem Wert für squeezebox.audioDevice nur den Pfad für squeezebox.squeezeCmd, weil der Vorgabewert /usr/local/bin/squeezelite lautet.

Aufgefallen ist mir, dass die Plugin-Dependencies für Trusty nicht mehr passen, das Paket baut gerade neu.

Wie sieht denn deine /etc/init/pulseaudio.override aus?

/etc/init/pulseaudio.override

hotzenplotz5 · 21. November 2014

squeezebox.squeezeCmd = /usr/bin/squeezelite

musste ich natürlich auch ändern, genau.
und das mit den plugin dependencys stimmt, aber sonst .... leider kein ton

hotzenplotz5 · 21. November 2014

Code

# make sure pulseaudio is running before vdr accesses alsa devices
start on runlevel [2345] or starting vdr


# allow dynamic module loading
env DISALLOW_MODULE_LOADING=0


# save/restore cookie
env COOKIE_CACHE=/var/cache/pulse
env COOKIE_RUN=/run/pulse/.config/pulse


pre-start script
  install -d -m755 -o pulse -g pulse /run/pulse


  if [ ! -d $COOKIE_RUN ]
  then
    install -d -m755 -o pulse -g pulse $COOKIE_RUN
  fi


  if [ -e $COOKIE_CACHE/cookie ]
  then
    cp $COOKIE_CACHE/cookie $COOKIE_RUN/cookie
    chmod 640 $COOKIE_RUN/cookie
    chown pulse.pulse-access $COOKIE_RUN/cookie
  fi
end script


pre-stop script
  if [ ! -d $COOKIE_CACHE ]
  then
    install -d -m755 -o pulse -g pulse $COOKIE_CACHE
  fi


  if [ -e $COOKIE_RUN/cookie ]
  then
    cp $COOKIE_RUN/cookie $COOKIE_CACHE/cookie
    chmod 640 $COOKIE_CACHE/cookie
    chown pulse.pulse-access $COOKIE_CACHE/cookie
  fi
end script

Alles anzeigen

seahawk1986 · 21. November 2014

Mit dem letzten Paket sollte das setzen des Loglevels in den Plugin-Einstellungen funktionieren - was sagt das Plugin denn da beim Aufruf?

hotzenplotz5 · 21. November 2014

Code

Nov 21 12:36:48 yavdr-lianli vdr: [5908] starting plugin: squeezebox
Nov 21 12:41:06 yavdr-lianli vdr: squeezebox: started /usr/bin/squeezelite with pid 6120
Nov 21 12:41:06 yavdr-lianli vdr: squeezebox: Trying connetion to 'localhost:9090', my mac is '00:22:4d:ab:ed:86'
Nov 21 12:41:06 yavdr-lianli vdr: squeezebox: Connection to LMC server at 'localhost:9090' established

sonst steht da leider nichts

hotzenplotz5 · 21. November 2014

weiter oben steht nur :

Code

Nov 21 12:36:52 yavdr-lianli vdr: audio/alsa: using device 'default'
Nov 21 12:36:52 yavdr-lianli vdr: audio/alsa: start delay 336ms

seahawk1986 · 21. November 2014

Mit Loglevel 3?

hotzenplotz5 · 21. November 2014

-l 3 in etc/default/vdr ?
wenn ja, dann ist das alles was ausgegeben wird

in var/log/vdr/upstart/vdr-frontend.log :

Code

sys:1: Warning: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). Most likely the process is ignoring SIGCHLD, or some other thread is invoking waitpid() with a nonpositive first argument; either behavior can break applications that use g_child_watch_add()/g_spawn_sync() either directly or indirectly.
(30961, 0) {}
child process ended
(1422, 0) {}
child process ended
(2873, 0) {}
child process ended
(3402, 0) {}
child process ended
(4316, 0) {}
child process ended
ERROR:root:could not stop python /usr/bin/frontend
ERROR:root:[Errno 3] No such process
Error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Ready <bound method Main.onStart of <__main__.Main object at 0x7fb8d704d4a8>>
Stop <bound method Main.onStop of <__main__.Main object at 0x7fb8d704d4a8>>
sys:1: Warning: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). Most likely the process is ignoring SIGCHLD, or some other thread is invoking waitpid() with a nonpositive first argument; either behavior can break applications that use g_child_watch_add()/g_spawn_sync() either directly or indirectly.
(1969, 0) {}
child process ended
(2461, 0) {}
child process ended
ERROR:root:could not stop python /usr/bin/frontend
ERROR:root:[Errno 3] No such process
method return sender=:1.56 -> dest=:1.60 reply_serial=2
   int32 900
   string "SoftHdDevice is detached"
Ready <bound method Main.onStart of <__main__.Main object at 0x7f8c388f30b8>>
Stop <bound method Main.onStop of <__main__.Main object at 0x7f8c388f30b8>>
ERROR:root:could not stop python /usr/bin/frontend
ERROR:root:[Errno 3] No such process
method return sender=:1.56 -> dest=:1.71 reply_serial=2
   int32 900
   string "SoftHdDevice is detached"
Ready <bound method Main.onStart of <__main__.Main object at 0x7f2f3b0f70b8>>
Stop <bound method Main.onStop of <__main__.Main object at 0x7f2f3b0f70b8>>
sys:1: Warning: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). Most likely the process is ignoring SIGCHLD, or some other thread is invoking waitpid() with a nonpositive first argument; either behavior can break applications that use g_child_watch_add()/g_spawn_sync() either directly or indirectly.
(5052, 0) {}
child process ended
(6013, 0) {}
child process ended

Alles anzeigen

ich schätze das hat nichts mit pulse zu tun ...

seahawk1986 · 21. November 2014

squeezebox.logLevel = 3 (lässt ich auch bequem über das OSD setzen)

Die Ausgaben sollten dann im Syslog auftauchen.

hotzenplotz5 · 21. November 2014

argh ok
sek.

achja beim beenden des plugins :

Code

Nov 21 12:57:29 yavdr-lianli vdr: squeezebox: Stopping player
Nov 21 12:57:29 yavdr-lianli vdr: squeezebox: stopping player
Nov 21 12:57:29 yavdr-lianli vdr: squeezebox: /usr/bin/squeezelite exited with 0
Nov 21 12:57:29 yavdr-lianli vdr: [6239] [softhddev]SetPlayMode: 0
Nov 21 12:57:29 yavdr-lianli vdr: [6239] [softhddev]SetVideoDisplayFormat: 1
Nov 21 12:57:29 yavdr-lianli vdr: [6239] [softhddev]GetSpuDecoder:
Nov 21 12:57:29 yavdr-lianli vdr: [6239] switching to channel 10
Nov 21 12:57:29 yavdr-lianli vdr: [6580] receiver on device 1 thread started (pid=6239, tid=6580, prio=high)
Nov 21 12:57:29 yavdr-lianli vdr: [6581] TS buffer on device 1 thread started (pid=6239, tid=6581, prio=high)
Nov 21 12:57:30 yavdr-lianli vdr: [6239] [softhddev]SetPlayMode: 1
Nov 21 12:57:30 yavdr-lianli vdr: audio/alsa: using device 'default'

Alles anzeigen

evtl. sollte ich auch nochmal "default" als audio device testen. hab ich aber auch schon ...

hotzenplotz5 · 21. November 2014

http://pastebin.com/raw.php?i=tv3x8cWS

hotzenplotz5 · 21. November 2014

als user vdr auf der konsole:

squeezelite -o pulse
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Failed to create secure directory (/run/user/1000/pulse): Permission denied

ich habe den eindruck pulseaudio und ich mögen uns nicht besonders. warscheinlich hat der pulseaudio programmierer auf halber strecke aufgehört zu programmieren und mit was anderem weitergemacht

seahawk1986 · 21. November 2014

Siehst du mit pavucontrol, dass squeezelite über ein Alsa-Plugin als Wiedergabe-Quelle auftaucht?

Code

squeezelite -o pulse
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Failed to create secure directory (/run/user/1000/pulse): Permission denied
Failed to create secure directory (/run/user/1000/pulse): Permission denied

Dann ist dein User nicht in der Gruppe pulse-access.

[gelöst] vdr-plugin-squeezebox und PROBLEME MIT PULSEAUDIO

Jetzt mitmachen!

Teilen