kein ton über HDMI

kolibri · Sep 12th 2014

hallo zusammen..

ich habe mir soeben eine neue grafikkarte gekauft, um das ganze über hdmi abzuwickeln....

leider gabs bereits bei dem grafikkartentreiber probleme... habe daher anstatt dem treiber aus der e-tobi-anleitung den neuesten nvidia-treiber installiert.
bild bereits vorhanden... vdr läuft..

leider jedoch kein ton...

die grafikkarte ist eine Gigabyte Geforce GTX 650

ein blick in die ausgabe von aplay -l:

Code

aplay: device_list:235: keine Soundkarten gefunden ...

die soundkarte onboard habe ich im bios ausgeschaltet..

die ausgabe von hwinfo --sound:

Code

26: PCI 500.1: 0403 Audio device
[Created at pci.318]
Unique ID: 5yAR.GIWylax_gA7
Parent ID: vSkL.cutpr6XtQiF
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:05:00.1
SysFS BusID: 0000:05:00.1
Hardware Class: sound
Model: "nVidia Audio device"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0e1b
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x362b
Revision: 0xa1
Memory Range: 0xfebfc000-0xfebfffff (rw,non-prefetchable)
IRQ: 5 (no events)
Module Alias: "pci:v000010DEd00000E1Bsv00001458sd0000362Bbc04sc03i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)

Display More

ich habe bereits die alsa-lib auf 1.0.28 geupdatet.. aber leider brachte das auch nicht viel..

wie bringe ich das system dazu die karte, bzw. deren soundchip korrekt zu erkennen und den treiber zu laden?

vielen dank im voraus..
kolibri

mtron · Sep 12th 2014

poste mal die 'dmesg' Ausgabe nach einem frischen boot, /var/log/xorg.0.log und die Ausgabe des 'Alsa Info' scripts

Code

wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh

Grundsätzlich sollte dein GK107 schon mit alsa funktionieren.

kolibri · Sep 12th 2014

dmesg wirft mir folgendes um die ohren....

Code

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze6) (jmm@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue May 13 16:33:32 UTC 2014
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffa0000 - 000000001ffb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1ffa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ffa0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ffa0000 @ 10000-16000
[ 0.000000] RAMDISK: 177a3000 - 17ff70df
[ 0.000000] ACPI: RSDP 000f9b60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1ffa0000 00038 (v01 A M I OEMRSDT 06001206 MSFT 00000097)
[ 0.000000] ACPI: FACP 1ffa0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1ffa0440 05B6E (v01 AS268 AS268122 00000122 INTL 20051117)
[ 0.000000] ACPI: FACS 1ffb0000 00040
[ 0.000000] ACPI: APIC 1ffa0390 0006C (v01 A M I OEMAPIC 06001206 MSFT 00000097)
[ 0.000000] ACPI: MCFG 1ffa0400 0003C (v01 A M I OEMMCFG 06001206 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1ffb0040 00062 (v01 A M I AMI_OEM 06001206 MSFT 00000097)
[ 0.000000] ACPI: AAFT 1ffa5fb0 00027 (v01 A M I OEMAAFT 06001206 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffa0000
[ 0.000000] low ram: 0 - 1ffa0000
[ 0.000000] node 0 low ram: 00000000 - 1ffa0000
[ 0.000000] node 0 bootmap 00012000 - 00015ff4
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffa0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cad2c] TEXT DATA BSS ==> [0001000000 - 00014cad2c]
[ 0.000000] #4 [00177a3000 - 0017ff70df] RAMDISK ==> [00177a3000 - 0017ff70df]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014cb000 - 00014d114b] BRK ==> [00014cb000 - 00014d114b]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffa0
[ 0.000000] HighMem 0x0001ffa0 -> 0x0001ffa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ffa0
[ 0.000000] On node 0 totalpages: 130863
[ 0.000000] free_area_init_node: node 0, pgdat c13b2900, node_mem_map c14d3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125888 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34360 r0 d22984 u1048576
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129839
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c69127b0-06d5-4703-81ed-f71863490581 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 504740k/523904k available (2509k kernel code, 18228k reserved, 1315k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xe07a0000 - 0xff3fe000 ( 492 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffa0000 ( 511 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141c000 ( 380 kB)
[ 0.000000] .data : 0xc127379b - 0xc13bc504 (1315 kB)
[ 0.000000] .text : 0xc1000000 - 0xc127379b (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.906 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.81 BogoMIPS (lpj=9575624)
[ 0.004018] Security Framework initialized
[ 0.004021] SELinux: Disabled at boot.
[ 0.004027] Mount-cache hash table entries: 512
[ 0.004132] Initializing cgroup subsys ns
[ 0.004136] Initializing cgroup subsys cpuacct
[ 0.004139] Initializing cgroup subsys devices
[ 0.004141] Initializing cgroup subsys freezer
[ 0.004143] Initializing cgroup subsys net_cls
[ 0.004163] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004165] CPU: L2 cache: 4096K
[ 0.004167] CPU: Physical Processor ID: 0
[ 0.004169] CPU: Processor Core ID: 0
[ 0.004173] mce: CPU supports 6 MCE banks
[ 0.004180] CPU0: Thermal monitoring enabled (TM2)
[ 0.004183] using mwait in idle threads.
[ 0.004189] Performance Events: Core2 events, Intel PMU driver.
[ 0.004196] ... version: 2
[ 0.004198] ... bit width: 40
[ 0.004199] ... generic registers: 2
[ 0.004201] ... value mask: 000000ffffffffff
[ 0.004203] ... max period: 000000007fffffff
[ 0.004204] ... fixed-purpose events: 3
[ 0.004206] ... event mask: 0000000700000003
[ 0.004209] Checking 'hlt' instruction... OK.
[ 0.021065] ACPI: Core revision 20090903
[ 0.028053] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069119] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156076] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.156083] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160053] Brought up 2 CPUs
[ 0.160056] Total of 2 processors activated (9540.76 BogoMIPS).
[ 0.161189] CPU0 attaching sched-domain:
[ 0.161193] domain 0: span 0-1 level MC
[ 0.161195] groups: group c1c03778 cpus 0 group c1d03778 cpus 1
[ 0.161201] CPU1 attaching sched-domain:
[ 0.161203] domain 0: span 0-1 level MC
[ 0.161205] groups: group c1d03778 cpus 1 group c1c03778 cpus 0
[ 0.161264] devtmpfs: initialized
[ 0.161264] regulator: core version 0.5
[ 0.161264] NET: Registered protocol family 16
[ 0.161264] ACPI: bus type pci registered
[ 0.161264] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.161264] PCI: Not using MMCONFIG.
[ 0.161264] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.161264] PCI: Using configuration type 1 for base access
[ 0.161264] bio: create slab <bio-0> at 0
[ 0.161264] ACPI: EC: Look up EC in DSDT
[ 0.166259] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.170647] ACPI: Interpreter enabled
[ 0.170651] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.170672] ACPI: Using IOAPIC for interrupt routing
[ 0.170717] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.173854] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.173857] PCI: Using MMCONFIG for extended config space
[ 0.180876] ACPI: No dock devices found.
[ 0.181114] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181220] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.181223] pci 0000:00:01.0: PME# disabled
[ 0.181280] pci 0000:00:1a.0: reg 20 io port: [0xb880-0xb89f]
[ 0.181326] pci 0000:00:1a.1: reg 20 io port: [0xbc00-0xbc1f]
[ 0.181378] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfcdffc00-0xfcdfffff]
[ 0.181436] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.181440] pci 0000:00:1a.7: PME# disabled
[ 0.181510] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181514] pci 0000:00:1c.0: PME# disabled
[ 0.181586] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.181590] pci 0000:00:1c.2: PME# disabled
[ 0.181661] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.181665] pci 0000:00:1c.3: PME# disabled
[ 0.181708] pci 0000:00:1d.0: reg 20 io port: [0xb400-0xb41f]
[ 0.181755] pci 0000:00:1d.1: reg 20 io port: [0xb480-0xb49f]
[ 0.181801] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
[ 0.181852] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfcdff800-0xfcdffbff]
[ 0.181911] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.181915] pci 0000:00:1d.7: PME# disabled
[ 0.182037] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.182092] pci 0000:00:1f.2: reg 10 io port: [0xa080-0xa087]
[ 0.182097] pci 0000:00:1f.2: reg 14 io port: [0xa000-0xa003]
[ 0.182103] pci 0000:00:1f.2: reg 18 io port: [0x9c00-0x9c07]
[ 0.182108] pci 0000:00:1f.2: reg 1c io port: [0x9880-0x9883]
[ 0.182114] pci 0000:00:1f.2: reg 20 io port: [0x9800-0x980f]
[ 0.182119] pci 0000:00:1f.2: reg 24 io port: [0x9480-0x948f]
[ 0.182144] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.182147] pci 0000:00:1f.2: PME# disabled
[ 0.182167] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfcdff400-0xfcdff4ff]
[ 0.182183] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.182220] pci 0000:00:1f.5: reg 10 io port: [0xb080-0xb087]
[ 0.182226] pci 0000:00:1f.5: reg 14 io port: [0xb000-0xb003]
[ 0.182231] pci 0000:00:1f.5: reg 18 io port: [0xac00-0xac07]
[ 0.182237] pci 0000:00:1f.5: reg 1c io port: [0xa880-0xa883]
[ 0.182242] pci 0000:00:1f.5: reg 20 io port: [0xa800-0xa80f]
[ 0.182248] pci 0000:00:1f.5: reg 24 io port: [0xa480-0xa48f]
[ 0.182272] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.182275] pci 0000:00:1f.5: PME# disabled
[ 0.182309] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.182319] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.182328] pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xde000000-0xdfffffff]
[ 0.182334] pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.182340] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfeb00000-0xfeb7ffff]
[ 0.182411] pci 0000:05:00.1: reg 10 32bit mmio: [0xfebfc000-0xfebfffff]
[ 0.182588] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.182591] pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfebfffff]
[ 0.182595] pci 0000:00:01.0: bridge 64bit mmio pref: [0xde000000-0xefffffff]
[ 0.182637] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xddf00000-0xddffffff]
[ 0.182680] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.182700] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xddeff000-0xddefffff]
[ 0.182713] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xddef8000-0xddefbfff]
[ 0.182781] pci 0000:02:00.0: supports D1 D2
[ 0.182783] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182788] pci 0000:02:00.0: PME# disabled
[ 0.188075] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.188082] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdde00000-0xddefffff]
[ 0.188132] pci 0000:01:00.0: reg 10 64bit mmio: [0xfceef800-0xfceeffff]
[ 0.188140] pci 0000:01:00.0: reg 18 io port: [0xc000-0xc0ff]
[ 0.188215] pci 0000:01:00.0: supports D2
[ 0.188217] pci 0000:01:00.0: PME# supported from D2 D3hot D3cold
[ 0.188222] pci 0000:01:00.0: PME# disabled
[ 0.188277] pci 0000:01:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.188285] pci 0000:01:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.188293] pci 0000:01:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.188300] pci 0000:01:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.188308] pci 0000:01:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.188322] pci 0000:01:00.1: reg 30 32bit mmio pref: [0xfcef0000-0xfcefffff]
[ 0.188376] pci 0000:01:00.1: supports D2
[ 0.188378] pci 0000:01:00.1: PME# supported from D2 D3hot D3cold
[ 0.188383] pci 0000:01:00.1: PME# disabled
[ 0.196098] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.196102] pci 0000:00:1c.3: bridge 32bit mmio: [0xfce00000-0xfcefffff]
[ 0.196127] pci 0000:04:00.0: reg 10 32bit mmio: [0xfcfffc00-0xfcfffdff]
[ 0.196181] pci 0000:04:01.0: reg 10 32bit mmio: [0xfcfff800-0xfcfff9ff]
[ 0.196254] pci 0000:00:1e.0: transparent bridge
[ 0.196259] pci 0000:00:1e.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff]
[ 0.196281] pci_bus 0000:00: on NUMA node 0
[ 0.196285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.196424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.196480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.196614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.196672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.196726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.209276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.209377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.209477] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209576] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.209675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.209775] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.209875] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.209974] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.210067] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210073] vgaarb: loaded
[ 0.210086] PCI: Using ACPI for IRQ routing
[ 0.210086] Switching to clocksource tsc
[ 0.210086] pnp: PnP ACPI init
[ 0.210086] ACPI: bus type pnp registered
[ 0.211945] pnp: PnP ACPI: found 14 devices
[ 0.211947] ACPI: ACPI bus type pnp unregistered
[ 0.211950] PnPBIOS: Disabled by ACPI PNP
[ 0.211959] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.211966] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.211969] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.211972] system 00:06: ioport range 0x480-0x4bf has been reserved
[ 0.211975] system 00:06: ioport range 0x900-0x90f has been reserved
[ 0.211978] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.211981] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.211986] system 00:08: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.211991] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.211994] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.212000] system 00:0b: ioport range 0x280-0x28f has been reserved
[ 0.212002] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.212007] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.212013] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.212016] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.212018] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.212021] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.246706] pci 0000:00:01.0: PCI bridge, secondary bus 0000:05
[ 0.246709] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.246713] pci 0000:00:01.0: MEM window: 0xfd000000-0xfebfffff
[ 0.246716] pci 0000:00:01.0: PREFETCH window: 0x000000de000000-0x000000efffffff
[ 0.246721] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.246724] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.246728] pci 0000:00:1c.0: MEM window: 0x20000000-0x203fffff
[ 0.246732] pci 0000:00:1c.0: PREFETCH window: 0x000000ddf00000-0x000000ddffffff
[ 0.246738] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.246741] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.246746] pci 0000:00:1c.2: MEM window: 0x20400000-0x207fffff
[ 0.246750] pci 0000:00:1c.2: PREFETCH window: 0x000000dde00000-0x000000ddefffff
[ 0.246756] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.246759] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.246763] pci 0000:00:1c.3: MEM window: 0xfce00000-0xfcefffff
[ 0.246767] pci 0000:00:1c.3: PREFETCH window: 0x00000020800000-0x000000209fffff
[ 0.246773] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.246775] pci 0000:00:1e.0: IO window: disabled
[ 0.246780] pci 0000:00:1e.0: MEM window: 0xfcf00000-0xfcffffff
[ 0.246784] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.246796] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.246799] pci 0000:00:01.0: setting latency timer to 64
[ 0.246806] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.246810] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.246813] pci 0000:00:1c.0: setting latency timer to 64
[ 0.246821] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.246825] pci 0000:00:1c.2: setting latency timer to 64
[ 0.246833] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.246837] pci 0000:00:1c.3: setting latency timer to 64
[ 0.246842] pci 0000:00:1e.0: setting latency timer to 64
[ 0.246846] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.246849] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.246851] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.246853] pci_bus 0000:05: resource 1 mem: [0xfd000000-0xfebfffff]
[ 0.246856] pci_bus 0000:05: resource 2 pref mem [0xde000000-0xefffffff]
[ 0.246859] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.246861] pci_bus 0000:03: resource 1 mem: [0x20000000-0x203fffff]
[ 0.246863] pci_bus 0000:03: resource 2 pref mem [0xddf00000-0xddffffff]
[ 0.246866] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.246868] pci_bus 0000:02: resource 1 mem: [0x20400000-0x207fffff]
[ 0.246871] pci_bus 0000:02: resource 2 pref mem [0xdde00000-0xddefffff]
[ 0.246873] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.246876] pci_bus 0000:01: resource 1 mem: [0xfce00000-0xfcefffff]
[ 0.246878] pci_bus 0000:01: resource 2 pref mem [0x20800000-0x209fffff]
[ 0.246881] pci_bus 0000:04: resource 1 mem: [0xfcf00000-0xfcffffff]
[ 0.246883] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.246885] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.246909] NET: Registered protocol family 2
[ 0.246982] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.247206] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.247253] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.247298] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.247301] TCP reno registered
[ 0.247359] NET: Registered protocol family 1
[ 0.247375] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.247391] pci 0000:00:1a.0: PCI INT A disabled
[ 0.247397] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.247412] pci 0000:00:1a.1: PCI INT B disabled
[ 0.247421] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247436] pci 0000:00:1a.7: PCI INT C disabled
[ 0.247445] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247460] pci 0000:00:1d.0: PCI INT A disabled
[ 0.247465] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.247480] pci 0000:00:1d.1: PCI INT B disabled
[ 0.247485] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247500] pci 0000:00:1d.2: PCI INT C disabled
[ 0.247508] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247520] pci 0000:00:1d.7: PCI INT A disabled
[ 0.247538] pci 0000:05:00.0: Boot video device
[ 0.247584] Unpacking initramfs...
[ 0.472978] Freeing initrd memory: 8528k freed
[ 0.480454] audit: initializing netlink socket (disabled)
[ 0.480472] type=2000 audit(1410536416.479:1): initialized
[ 0.483755] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.485086] VFS: Disk quotas dquot_6.5.2
[ 0.485136] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.485214] msgmni has been set to 1003
[ 0.485421] alg: No test for stdrng (krng)
[ 0.485471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.485474] io scheduler noop registered
[ 0.485476] io scheduler anticipatory registered
[ 0.485478] io scheduler deadline registered
[ 0.485510] io scheduler cfq registered (default)
[ 0.485624] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.485630] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.485718] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.485725] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.485828] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.485835] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.485942] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.485950] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.486109] isapnp: Scanning for PnP cards...
[ 0.839753] isapnp: No Plug & Play device found
[ 0.840918] Linux agpgart interface v0.103
[ 0.841061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.841447] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.841449] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.841963] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.842014] mice: PS/2 mouse device common for all mice
[ 0.842063] rtc_cmos 00:03: RTC can wake from S4
[ 0.842094] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.842115] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.842127] cpuidle: using governor ladder
[ 0.842129] cpuidle: using governor menu
[ 0.842133] No iBFT detected.
[ 0.842451] TCP cubic registered
[ 0.842580] NET: Registered protocol family 10
[ 0.843265] Mobile IPv6
[ 0.843268] NET: Registered protocol family 17
[ 0.843282] Using IPI No-Shortcut mode
[ 0.843352] PM: Resume from disk failed.
[ 0.843361] registered taskstats version 1
[ 0.843744] rtc_cmos 00:03: setting system clock to 2014-09-12 15:40:17 UTC (1410536417)
[ 0.843784] Initalizing network drop monitor service
[ 0.843808] Freeing unused kernel memory: 380k freed
[ 0.844077] Write protecting the kernel text: 2512k
[ 0.844097] Write protecting the kernel read-only data: 912k
[ 0.857241] udev[56]: starting version 164
[ 0.948887] usbcore: registered new interface driver usbfs
[ 0.948909] usbcore: registered new interface driver hub
[ 0.949243] usbcore: registered new device driver usb
[ 0.961017] SCSI subsystem initialized
[ 0.980212] libata version 3.00 loaded.
[ 0.987667] ata_piix 0000:00:1f.2: version 2.13
[ 0.987687] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.987692] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.987728] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.990691] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.990708] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.990739] r8169 0000:02:00.0: setting latency timer to 64
[ 0.990790] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 0.991374] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xe09ec000, bc:5f:f4:74:5c:85, XID 081000c0 IRQ 28
[ 0.992605] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.993913] firewire_ohci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.993919] firewire_ohci 0000:01:00.0: setting latency timer to 64
[ 1.071567] firewire_ohci: Added fw-ohci device 0000:01:00.0, OHCI version 1.10
[ 1.071607] firewire_ohci: swap not done yet
[ 1.071613] firewire_ohci: swap not done yet
[ 1.071617] firewire_ohci: swap not done yet
[ 1.084990] pata_via 0000:01:00.1: version 0.3.4
[ 1.085004] pata_via 0000:01:00.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.085058] pata_via 0000:01:00.1: setting latency timer to 64
[ 1.085109] scsi0 : pata_via
[ 1.085176] scsi1 : pata_via
[ 1.085392] ata1: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 1.085395] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 1.138810] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.138846] scsi2 : ata_piix
[ 1.138897] scsi3 : ata_piix
[ 1.140189] ata3: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 19
[ 1.140195] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 19
[ 1.140232] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.140246] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.140250] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.140271] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.140300] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.144180] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.144191] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfcdffc00
[ 1.168006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.168031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.168034] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168036] usb usb1: Product: EHCI Host Controller
[ 1.168038] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.168040] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.168115] usb usb1: configuration #1 chosen from 1 choice
[ 1.168143] hub 1-0:1.0: USB hub found
[ 1.168149] hub 1-0:1.0: 4 ports detected
[ 1.168198] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.168205] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.168208] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.168216] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.168243] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[ 1.168270] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.168272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168275] usb usb2: Product: UHCI Host Controller
[ 1.168277] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.168279] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.168338] usb usb2: configuration #1 chosen from 1 choice
[ 1.168364] hub 2-0:1.0: USB hub found
[ 1.168369] hub 2-0:1.0: 2 ports detected
[ 1.168420] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.168425] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.168461] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.168495] scsi4 : ata_piix
[ 1.168550] scsi5 : ata_piix
[ 1.169607] ata5: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
[ 1.169611] ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
[ 1.169661] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.169672] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.169675] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.169683] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.169710] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.173601] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.173612] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcdff800
[ 1.188507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.188521] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.188524] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.188526] usb usb3: Product: EHCI Host Controller
[ 1.188528] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.188530] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.188593] usb usb3: configuration #1 chosen from 1 choice
[ 1.188619] hub 3-0:1.0: USB hub found
[ 1.188625] hub 3-0:1.0: 6 ports detected
[ 1.188676] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.188683] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.188686] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.188694] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.188721] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000bc00
[ 1.188749] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.188752] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.188754] usb usb4: Product: UHCI Host Controller
[ 1.188756] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.188758] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.188826] usb usb4: configuration #1 chosen from 1 choice
[ 1.188852] hub 4-0:1.0: USB hub found
[ 1.188858] hub 4-0:1.0: 2 ports detected
[ 1.188897] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.188904] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.188906] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.188913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.188933] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[ 1.188961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.188963] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.188965] usb usb5: Product: UHCI Host Controller
[ 1.188967] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.188969] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.189027] usb usb5: configuration #1 chosen from 1 choice
[ 1.189051] hub 5-0:1.0: USB hub found
[ 1.189057] hub 5-0:1.0: 2 ports detected
[ 1.189095] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.189101] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.189104] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.189110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.189130] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[ 1.189159] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.189161] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.189164] usb usb6: Product: UHCI Host Controller
[ 1.189166] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.189168] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.189225] usb usb6: configuration #1 chosen from 1 choice
[ 1.189250] hub 6-0:1.0: USB hub found
[ 1.189255] hub 6-0:1.0: 2 ports detected
[ 1.189293] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.189299] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.189302] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.189308] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.189328] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 1.189355] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.189357] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.189359] usb usb7: Product: UHCI Host Controller
[ 1.189361] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.189363] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.189420] usb usb7: configuration #1 chosen from 1 choice
[ 1.189444] hub 7-0:1.0: USB hub found
[ 1.189449] hub 7-0:1.0: 2 ports detected
[ 1.498587] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.509084] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.580058] firewire_core: created device fw0: GUID 008f1300c94a1300, S400
[ 1.580065] firewire_ohci: swap not done yet
[ 1.580069] firewire_ohci: swap not done yet
[ 1.580073] firewire_ohci: swap not done yet
[ 1.592481] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.725048] usb 1-4: New USB device found, idVendor=13fd, idProduct=0842
[ 1.725051] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.725053] usb 1-4: Product: USB Mass Storage Device
[ 1.725055] usb 1-4: Manufacturer: TSSTcorp
[ 1.725057] usb 1-4: SerialNumber: SATASLIM00003007816
[ 1.725113] usb 1-4: configuration #1 chosen from 1 choice
[ 1.731417] Initializing USB Mass Storage driver...
[ 1.731491] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.731555] usbcore: registered new interface driver usb-storage
[ 1.731557] USB Mass Storage support registered.
[ 1.731561] usb-storage: device found at 3
[ 1.731563] usb-storage: waiting for device to settle before scanning
[ 1.944068] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.944083] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 1.944086] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.944102] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 1.952300] ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 1.952303] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.953367] ata3.00: ATA-7: Maxtor 6L080M0, BACE1G10, max UDMA/133
[ 1.953370] ata3.00: 160086528 sectors, multi 0: LBA NCQ (depth 0/32)
[ 1.960321] ata4.00: configured for UDMA/133
[ 1.964506] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.969140] ata3.00: configured for UDMA/133
[ 1.969238] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L080M0 BACE PQ: 0 ANSI: 5
[ 1.969406] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 1.975718] sd 2:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.975769] sd 2:0:0:0: [sda] Write Protect is off
[ 1.975771] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.975793] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.975915] sda:
[ 1.976081] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.976132] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.976134] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.976156] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.976304] sdb: sdb1
[ 1.978430] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.008916] sda1 sda2 < sda5 >
[ 2.041532] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.134834] usb 4-1: New USB device found, idVendor=0471, idProduct=0815
[ 2.134837] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.134839] usb 4-1: Product: eHome Infrared Transceiver
[ 2.134841] usb 4-1: Manufacturer: Philips
[ 2.134843] usb 4-1: SerialNumber: PH00MKdN
[ 2.134914] usb 4-1: configuration #1 chosen from 1 choice
[ 2.398701] PM: Starting manual resume from disk
[ 2.398704] PM: Resume from partition 8:5
[ 2.398706] PM: Checking hibernation image.
[ 2.398823] PM: Error -22 checking image file
[ 2.398824] PM: Resume from disk failed.
[ 2.438393] kjournald starting. Commit interval 5 seconds
[ 2.438402] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.624011] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.801308] usb 6-2: New USB device found, idVendor=046d, idProduct=c31c
[ 2.801311] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.801313] usb 6-2: Product: USB Keyboard
[ 2.801315] usb 6-2: Manufacturer: Logitech
[ 2.801404] usb 6-2: configuration #1 chosen from 1 choice
[ 4.044347] udev[420]: starting version 164
[ 4.644401] processor LNXCPU:00: registered as cooling_device0
[ 4.644439] processor LNXCPU:01: registered as cooling_device1
[ 4.645534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.645540] ACPI: Power Button [PWRB]
[ 4.645587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.645590] ACPI: Power Button [PWRF]
[ 4.690990] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.763299] usbcore: registered new interface driver hiddev
[ 4.777741] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input3
[ 4.777789] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 4.818572] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input4
[ 4.818608] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 4.818628] usbcore: registered new interface driver usbhid
[ 4.818630] usbhid: v2.6:USB HID core driver
[ 5.744179] nvidia: module license 'NVIDIA' taints kernel.
[ 5.744183] Disabling lock debugging due to kernel taint
[ 6.087837] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.087853] nvidia 0000:05:00.0: setting latency timer to 64
[ 6.087858] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.088136] NVRM: loading NVIDIA UNIX x86 Kernel Module 340.32 Tue Aug 5 20:09:46 PDT 2014
[ 6.090770] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.170354] saa7146: register extension 'budget dvb'.
[ 6.170382] budget dvb 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.170400] IRQ 21/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.170409] saa7146: found saa7146 @ mem e2180c00 (revision 1, irq 21) (0x1131,0x4f60).
[ 6.170414] saa7146 (0): dma buffer size 192512
[ 6.170416] DVB: registering new adapter (Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend))
[ 6.208866] adapter failed MAC signature check
[ 6.208868] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 6.280734] Linux video capture interface: v2.00
[ 6.296684] saa7146: register extension 'budget_av'.
[ 6.728648] usb-storage: device scan complete
[ 6.730268] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TS01 PQ: 0 ANSI: 0
[ 6.854142] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.854145] Uniform CD-ROM driver Revision: 3.20
[ 6.854226] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 6.856201] budget: tuner ALPS BSRU6 detected
[ 6.856206] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 6.856348] budget_av 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.856375] IRQ 22/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.856394] saa7146: found saa7146 @ mem e2398800 (revision 1, irq 22) (0x1131,0x4f56).
[ 6.856400] saa7146 (1): dma buffer size 192512
[ 6.856402] DVB: registering new adapter (KNC1 DVB-S)
[ 6.892932] adapter failed MAC signature check
[ 6.892934] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 7.127084] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.127116] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.127152] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 7.156352] KNC1-1: MAC addr = 00:09:d6:64:02:2a
[ 7.464180] DVB: registering adapter 1 frontend 0 (ST STV0299 DVB-S)...
[ 7.464276] budget-av: ci interface initialised.
[ 7.857877] Adding 1002488k swap on /dev/sda5. Priority:-1 extents:1 across:1002488k
[ 8.115300] EXT3 FS on sda1, internal journal
[ 8.352650] loop: module loaded
[ 8.870726] kjournald starting. Commit interval 5 seconds
[ 8.870999] EXT3 FS on sdb1, internal journal
[ 8.871002] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.884895] fuse init (API version 7.13)
[ 11.070187] RPC: Registered udp transport module.
[ 11.070189] RPC: Registered tcp transport module.
[ 11.070191] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.216083] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.642926] svc: failed to register lockdv1 RPC service (errno 97).
[ 11.643804] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 11.752046] NFSD: starting 90-second grace period
[ 15.653286] Bluetooth: Core ver 2.15
[ 15.653325] NET: Registered protocol family 31
[ 15.653327] Bluetooth: HCI device and connection manager initialized
[ 15.653329] Bluetooth: HCI socket layer initialized
[ 15.704632] Bluetooth: L2CAP ver 2.14
[ 15.704635] Bluetooth: L2CAP socket layer initialized
[ 15.819578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.819580] Bluetooth: BNEP filters: protocol multicast
[ 15.862779] Bridge firewalling registered
[ 15.951658] Bluetooth: RFCOMM TTY layer initialized
[ 15.951662] Bluetooth: RFCOMM socket layer initialized
[ 15.951664] Bluetooth: RFCOMM ver 1.11
[ 16.109372] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.109375] Bluetooth: SCO socket layer initialized
[ 16.274233] lp: driver loaded but no devices found
[ 16.459489] ppdev: user-space parallel port driver
[ 17.081151] nvidia 0000:05:00.0: irq 29 for MSI/MSI-X
[ 19.714321] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-1.fw
[ 19.970360] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[ 19.978195] r8169 0000:02:00.0: eth0: link down
[ 19.978304] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.623630] r8169 0000:02:00.0: eth0: link up
[ 21.623668] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.668005] eth0: no IPv6 routers present

Display More

datei /var/log/Xorg.0.log spuckt folgendes aus...

Code

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
Current Operating System: Linux wzvdr 2.6.32-5-686 #1 SMP Tue May 13 16:33:32 UTC 2014 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c69127b0-06d5-4703-81ed-f71863490581 ro quiet
Build Date: 17 December 2013 08:26:59PM
xorg-server 2:1.7.7-18 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 12 15:28:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81eccc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:5:0:0) 10de:0fc6:1458:362b nVidia Corporation rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 340.32 Tue Aug 5 20:36:43 PDT 2014
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:14 PDT 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Sep 12 15:28:46 NVIDIA(0): Enabling 2D acceleration
(II) Sep 12 15:28:47 NVIDIA(0): NVIDIA GPU GeForce GTX 650 (GK107) at PCI:5:0:0 (GPU-0)
(--) Sep 12 15:28:47 NVIDIA(0): Memory: 2097152 kBytes
(--) Sep 12 15:28:47 NVIDIA(0): VideoBIOS: 80.07.35.00.9d
(II) Sep 12 15:28:47 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Sep 12 15:28:47 NVIDIA(0): Valid display device(s) on GeForce GTX 650 at PCI:5:0:0
(--) Sep 12 15:28:47 NVIDIA(0): CRT-0
(--) Sep 12 15:28:47 NVIDIA(0): DFP-0
(--) Sep 12 15:28:47 NVIDIA(0): LG Electronics LG TV (DFP-1) (boot, connected)
(--) Sep 12 15:28:47 NVIDIA(0): DFP-2
(--) Sep 12 15:28:47 NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): DFP-0: Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): LG Electronics LG TV (DFP-1): Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): LG Electronics LG TV (DFP-1): 340.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): DFP-2: Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
(**) Sep 12 15:28:47 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Sep 12 15:28:47 NVIDIA(0): device LG Electronics LG TV (DFP-1) (Using EDID
(**) Sep 12 15:28:47 NVIDIA(0): frequencies has been enabled on all display devices.)
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "720x576".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (27.0 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (24.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (25.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (30.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (15.6 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "720x576".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "720x576".
(==) Sep 12 15:28:47 NVIDIA(0):
(==) Sep 12 15:28:47 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Sep 12 15:28:47 NVIDIA(0): will be used as the requested mode.
(==) Sep 12 15:28:47 NVIDIA(0):
(II) Sep 12 15:28:47 NVIDIA(0): Validated MetaModes:
(II) Sep 12 15:28:47 NVIDIA(0): "DFP-1:nvidia-auto-select"
(II) Sep 12 15:28:47 NVIDIA(0): Virtual screen size determined to be 1920 x 1080
(--) Sep 12 15:28:47 NVIDIA(0): DPI set to (30, 30); computed from "UseEdidDpi" X config
(--) Sep 12 15:28:47 NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) Sep 12 15:28:47 NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
(II) Sep 12 15:28:47 NVIDIA: access.
(II) Sep 12 15:28:47 NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Keyboard: always reports core events
(**) Logitech USB Keyboard: Device: "/dev/input/event0"
(II) Logitech USB Keyboard: Found keys
(II) Logitech USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Keyboard: always reports core events
(**) Logitech USB Keyboard: Device: "/dev/input/event1"
(II) Logitech USB Keyboard: Found absolute axes
(II) Logitech USB Keyboard: Found keys
(II) Logitech USB Keyboard: Configuring as mouse
(II) Logitech USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) Logitech USB Keyboard: initialized for absolute axes.
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Sep 12 15:46:31 NVIDIA(GPU-0): Deleting GPU-0

Display More

und last but not least das alsa infoscript:

Code

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.63
!!################################
!!Script ran on: Fri Sep 12 15:46:58 UTC 2014
!!Linux Distribution
!!------------------
Debian GNU/Linux 6.0 \n \l
!!DMI Information
!!---------------
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.30
!!Kernel Information
!!------------------
Kernel release: 2.6.32-5-686
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version:
Library version: 1.0.28
Utilities version: 1.0.23
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
!!PCI Soundcards installed in the system
!!--------------------------------------
04:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
04:01.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
05:00.1 Audio device: nVidia Corporation Device 0e1b (rev a1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
05:00.1 0403: 10de:0e1b (rev a1)
Subsystem: 1458:362b
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!---------------------------
!!ALSA Device nodes
!!-----------------
!!Aplay/Arecord output
!!--------------------
APLAY
aplay: device_list:235: no soundcards found...
ARECORD
arecord: device_list:235: no soundcards found...
!!Amixer output
!!-------------
!!Alsactl output
!!--------------
--startcollapse--
--endcollapse--
!!All Loaded Modules
!!------------------
Module
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
sco
rfcomm
bridge
stp
bnep
l2cap
crc16
bluetooth
rfkill
nfsd
lockd
nfs_acl
auth_rpcgss
sunrpc
exportfs
binfmt_misc
fuse
loop
firewire_sbp2
sg
sr_mod
cdrom
stv0299
budget_av
saa7146_vv
videodev
v4l1_compat
videobuf_dma_sg
videobuf_core
budget
budget_core
saa7146
ttpci_eeprom
dvb_core
i2c_i801
evdev
joydev
nvidia
i2c_core
usbhid
pcspkr
serio_raw
hid
button
processor
ext3
jbd
mbcache
sd_mod
crc_t10dif
usb_storage
ata_generic
pata_via
firewire_ohci
uhci_hcd
r8169
mii
ata_piix
ehci_hcd
thermal
thermal_sys
libata
firewire_core
crc_itu_t
scsi_mod
usbcore
nls_base
!!ALSA/HDA dmesg
!!--------------

Display More

liebe grüße
kolibri

mtron · Sep 12th 2014

Quote

!!Soundcards recognised by ALSA
!!-----------------------------

es werden bei dir keine alsa modules geladen und natürlich keine Soundcards erkannt.

Quote

!!ALSA Version
!!------------

Driver version:
Library version: 1.0.28
Utilities version: 1.0.23

Lib & Utils sollten dieselbe Version haben und einen Kernel Treiber brauchst du natürlich auch.

PS: Pobier mal den spoiler tag für lange logs

kolibri · Sep 12th 2014

hier die ausgabe...

Display Spoiler

/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb16.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb16-csp.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb-common.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb8-dsp.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sbawe.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-emu8000-synth.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb8.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-es968.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/sb/snd-sb16-dsp.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/wavefront/snd-wavefront.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-als100.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/cs423x/snd-cs4231.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/cs423x/snd-cs4236.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-adlib.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-interwave-stb.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-gusmax.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-gusextreme.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-interwave.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-gus-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/gus/snd-gusclassic.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/opti9xx/snd-opti93x.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/opti9xx/snd-miro.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-sgalaxy.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/ad1816a/snd-ad1816a.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-cmi8330.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-es18xx.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-dt019x.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-sscape.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-azt2320.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/ad1848/snd-ad1848.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/wss/snd-wss-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-sc6000.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/snd-opl3sa2.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/es1688/snd-es1688.ko
/lib/modules/2.6.32-5-686/kernel/sound/isa/es1688/snd-es1688-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/trident/snd-trident.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-cmipci.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-sonicvibes.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-via82xx-modem.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-als300.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-es1938.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/rme9652/snd-rme9652.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/rme9652/snd-hdsp.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/rme9652/snd-hdspm.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-ens1371.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-via82xx.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-cs4281.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/cs46xx/snd-cs46xx.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-ens1370.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/nm256/snd-nm256.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/vx222/snd-vx222.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-intel8x0m.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/mixart/snd-mixart.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ca0106/snd-ca0106.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-rme32.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-als4000.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ac97/snd-ac97-codec.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-gina24.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-layla24.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-layla20.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-indigoio.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-gina20.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-darla24.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-mia.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-indigodj.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-indigoiox.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-indigodjx.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-darla20.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-indigo.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-mona.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/echoaudio/snd-echo3g.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-es1968.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-ad1889.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/oxygen/snd-virtuoso.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/oxygen/snd-hifier.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/oxygen/snd-oxygen-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/oxygen/snd-oxygen.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-azt3328.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-intel8x0.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/emu10k1/snd-emu10k1x.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/emu10k1/snd-emu10k1.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/au88x0/snd-au8810.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/au88x0/snd-au8820.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/au88x0/snd-au8830.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ali5451/snd-ali5451.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ymfpci/snd-ymfpci.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-atiixp-modem.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/riptide/snd-riptide.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-fm801.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-bt87x.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ice1712/snd-ice1724.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ice1712/snd-ice1712.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/korg1212/snd-korg1212.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/ctxfi/snd-ctxfi.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/lx6464es/snd-lx6464es.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-atiixp.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-sis7019.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-cs5530.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-rme96.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/pcxhr/snd-pcxhr.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/snd-maestro3.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-nvhdmi.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-si3054.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-via.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-analog.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-realtek.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-atihdmi.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-idt.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-conexant.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko
/lib/modules/2.6.32-5-686/kernel/sound/pci/hda/snd-hda-codec-intelhdmi.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/snd-tea6330t.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/snd-i2c.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/other/snd-tea575x-tuner.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/other/snd-ak4xxx-adda.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/other/snd-ak4114.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/other/snd-ak4117.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/other/snd-pt2258.ko
/lib/modules/2.6.32-5-686/kernel/sound/i2c/snd-cs8427.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-dummy.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-mtpav.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/opl4/snd-opl4-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/opl4/snd-opl4-synth.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-virmidi.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/vx/snd-vx-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/mpu401/snd-mpu401.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/pcsp/snd-pcsp.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/opl3/snd-opl3-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/opl3/snd-opl3-synth.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-serial-u16550.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-mts64.ko
/lib/modules/2.6.32-5-686/kernel/sound/drivers/snd-portman2x4.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-rawmidi.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-hwdep.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-midi-emul.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-dummy.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-midi-event.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-virmidi.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-midi.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/seq/snd-seq-device.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-hrtimer.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-timer.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-pcm.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/snd-page-alloc.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/oss/snd-mixer-oss.ko
/lib/modules/2.6.32-5-686/kernel/sound/core/oss/snd-pcm-oss.ko
/lib/modules/2.6.32-5-686/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko
/lib/modules/2.6.32-5-686/kernel/sound/pcmcia/vx/snd-vxpocket.ko
/lib/modules/2.6.32-5-686/kernel/sound/usb/snd-usb-lib.ko
/lib/modules/2.6.32-5-686/kernel/sound/usb/snd-usb-audio.ko
/lib/modules/2.6.32-5-686/kernel/sound/usb/caiaq/snd-usb-caiaq.ko
/lib/modules/2.6.32-5-686/kernel/sound/usb/usx2y/snd-usb-usx2y.ko
/lib/modules/2.6.32-5-686/kernel/sound/usb/usx2y/snd-usb-us122l.ko
/lib/modules/2.6.32-5-686/kernel/sound/synth/emux/snd-emux-synth.ko
/lib/modules/2.6.32-5-686/kernel/sound/synth/snd-util-mem.ko

ps: spoiler..... genial!!! hihihiihi danke für den tip

mtron · Sep 12th 2014

ich habe den post oben nochmals editiert. Deine Installation ist nicht funktionsfähig, da das alsa kernel modul nicht geladen wurde. Du musst das modul gegen deinen aktuellen kernel übersetzen. Eventuell bringt deine Distro dafür dkms mit (schau mal in der doku dazu nach) Ebenso musst du die alsa utils auf dieselbe Version wie die Libs updaten.

kolibri · Sep 12th 2014

hmmmm...
wie mach ich das denn genau??? ich habe versucht die utils zu installieren, jedoch gabs da probleme...

das script configure läuft bereits auf folgenden fehler auf...

Code

configure: error: required curses helper header not found

wodurch make/make install natürlich garnicht erst zum zuge kommen....

meine linux-kenntnisse sind leider mehr als dürftig... zu karg, um wirklich zu wissen, worums da überhaupt geht

Quote

Du musst das modul gegen deinen aktuellen kernel übersetzen.

ähhh.. ja..... ich bin mir sicher daß du recht hast *ggg* auch wenn ich nicht wirklich weiss, was du damit meinst, geschweige denn, was ich nun tun kann

liebe grüße
kolibri

mtron · Sep 12th 2014

ok, das zu reparieren wird dich einiges an Zeit kosten weil du noch eine steile Linux Lernkurve vor dir hast Wenn du schnell zum erfolg kommen willst, dann mach einen neuinstall mit einer distro die ein wenig aktuellere Alsa Versionen mitbringt. yavdr oder easyvdr wären zum Beispiel auch beide debian basiert (zu größten Teilen)

kolibri · Sep 12th 2014

schnell muss es nicht sein....

gibt es keinen weg für einen noob, das auch mal wirklich zu verstehen????
bin bereit, was zu lernen...

gda · Sep 12th 2014

kolibri wrote:

gibt es keinen weg für einen noob, das auch mal wirklich zu verstehen????

Wenn man am Ball bleibt, dann kommt das Verständnis irgendwann von selbst. Wobei die Fehlermeldung eher wenig mit Linux zu tun hat. Zumindest eine ähnliche Fehlermeldung bekommst du auch wenn du unter Windows etwas kompilieren willst und es fehlen Header-Dateien.

Du kannst ja mal versuchen ob die Installation vom Paket ncurses-dev Abhilfe bringt.

Gerald

kolibri · Sep 12th 2014

mtron wrote:

ok, das zu reparieren wird dich einiges an Zeit kosten weil du noch eine steile Linux Lernkurve vor dir hast Wenn du schnell zum erfolg kommen willst, dann mach einen neuinstall mit einer distro die ein wenig aktuellere Alsa Versionen mitbringt. yavdr oder easyvdr wären zum Beispiel auch beide debian basiert (zu größten Teilen)

steile linux-lernkurve.. das hast du aber nett umschrieben *lol* klingt auf jeden fall besser als kompletter linux-vollidiot..

kolibri · Sep 12th 2014

gda wrote:

Wenn man am Ball bleibt, dann kommt das Verständnis irgendwann von selbst. Wobei die Fehlermeldung eher wenig mit Linux zu tun hat. Zumindest eine ähnliche Fehlermeldung bekommst du auch wenn du unter Windows etwas kompilieren willst und es fehlen Header-Dateien.

Du kannst ja mal versuchen ob die Installation vom Paket ncurses-dev Abhilfe bringt.

Gerald

danke für den tipp.. ich werd mal schauen,wie weit ich komme...

kolibri · Sep 13th 2014

hallo....

tatskraft!!! ich habs echt auf die reihe bekommen...

alsa-utils sind auf dem selben stand wie die libs..
weiterhin hab ich das modul gegen den aktuellen kernel übersetzt...

leute.. fragt mich nicht, wie ich das auf die reihe gekriegt hab.. ich weiss es selbst nicht... tante G. weiss halt alles...
und sie kann schnattern............. wenn man sie nur genug fragt..

doch das nächste problem naht....

im alsamixer kann ich zwar jetzt das gerät "HDA NVidia" mit dem Chip "Nvidia ID 42" auswählen, jedoch wenn ich das tue, meldet der mixer zurück, daß das gerät keine regler hat.. weiterhin erscheint NVidia auch nicht in der ausgabe von aplay -l als hardwaregerät (playback)...

ich denke, irgendwas fehlt noch, nur was???

kolibri · Sep 13th 2014

die ausgabe von cat /proc/asound/cards lautet:

0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfcdf8000 irq 29
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfebfc000 irq 17

also ist sie doch da.. warum erscheint sie dann nicht an den vorgenannten stellen????

mtron · Sep 13th 2014

poste nochmals die Ausgabe des alsa-info scripts, damit wir sehen können ob die Installation jetzt passt.

kolibri · Sep 13th 2014

so... die stunde der wahrheit... ich bin gespannt, ob ich das wirklich richtig gemacht habe... kann eigentlich nicht, sonst würde ich ja zugriff drauf haben...

also hier erstmal die dmesg-ausgabe...

Display Spoiler

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze6) (jmm@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue May 13 16:33:32 UTC 2014
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffa0000 - 000000001ffb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1ffa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ffa0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ffa0000 @ 10000-16000
[ 0.000000] RAMDISK: 177a3000 - 17ff70df
[ 0.000000] ACPI: RSDP 000f9b60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1ffa0000 00038 (v01 A M I OEMRSDT 06001206 MSFT 00000097)
[ 0.000000] ACPI: FACP 1ffa0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1ffa0440 05B6E (v01 AS268 AS268122 00000122 INTL 20051117)
[ 0.000000] ACPI: FACS 1ffb0000 00040
[ 0.000000] ACPI: APIC 1ffa0390 0006C (v01 A M I OEMAPIC 06001206 MSFT 00000097)
[ 0.000000] ACPI: MCFG 1ffa0400 0003C (v01 A M I OEMMCFG 06001206 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1ffb0040 00062 (v01 A M I AMI_OEM 06001206 MSFT 00000097)
[ 0.000000] ACPI: AAFT 1ffa5fb0 00027 (v01 A M I OEMAAFT 06001206 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffa0000
[ 0.000000] low ram: 0 - 1ffa0000
[ 0.000000] node 0 low ram: 00000000 - 1ffa0000
[ 0.000000] node 0 bootmap 00012000 - 00015ff4
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffa0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cad2c] TEXT DATA BSS ==> [0001000000 - 00014cad2c]
[ 0.000000] #4 [00177a3000 - 0017ff70df] RAMDISK ==> [00177a3000 - 0017ff70df]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014cb000 - 00014d114b] BRK ==> [00014cb000 - 00014d114b]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffa0
[ 0.000000] HighMem 0x0001ffa0 -> 0x0001ffa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ffa0
[ 0.000000] On node 0 totalpages: 130863
[ 0.000000] free_area_init_node: node 0, pgdat c13b2900, node_mem_map c14d3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125888 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34360 r0 d22984 u1048576
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129839
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c69127b0-06d5-4703-81ed-f71863490581 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 504740k/523904k available (2509k kernel code, 18228k reserved, 1315k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xe07a0000 - 0xff3fe000 ( 492 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffa0000 ( 511 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141c000 ( 380 kB)
[ 0.000000] .data : 0xc127379b - 0xc13bc504 (1315 kB)
[ 0.000000] .text : 0xc1000000 - 0xc127379b (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.879 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.75 BogoMIPS (lpj=9575516)
[ 0.004017] Security Framework initialized
[ 0.004021] SELinux: Disabled at boot.
[ 0.004027] Mount-cache hash table entries: 512
[ 0.004133] Initializing cgroup subsys ns
[ 0.004136] Initializing cgroup subsys cpuacct
[ 0.004140] Initializing cgroup subsys devices
[ 0.004142] Initializing cgroup subsys freezer
[ 0.004144] Initializing cgroup subsys net_cls
[ 0.004163] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004166] CPU: L2 cache: 4096K
[ 0.004168] CPU: Physical Processor ID: 0
[ 0.004169] CPU: Processor Core ID: 0
[ 0.004173] mce: CPU supports 6 MCE banks
[ 0.004181] CPU0: Thermal monitoring enabled (TM2)
[ 0.004184] using mwait in idle threads.
[ 0.004190] Performance Events: Core2 events, Intel PMU driver.
[ 0.004197] ... version: 2
[ 0.004198] ... bit width: 40
[ 0.004200] ... generic registers: 2
[ 0.004201] ... value mask: 000000ffffffffff
[ 0.004203] ... max period: 000000007fffffff
[ 0.004205] ... fixed-purpose events: 3
[ 0.004206] ... event mask: 0000000700000003
[ 0.004210] Checking 'hlt' instruction... OK.
[ 0.021065] ACPI: Core revision 20090903
[ 0.028052] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069096] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.072001] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[ 0.072001] APIC delta adjusted to PM-Timer: 1662528 (1614253)
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156124] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.156131] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160054] Brought up 2 CPUs
[ 0.160057] Total of 2 processors activated (9575.91 BogoMIPS).
[ 0.161188] CPU0 attaching sched-domain:
[ 0.161192] domain 0: span 0-1 level MC
[ 0.161194] groups: group c1c03778 cpus 0 group c1d03778 cpus 1
[ 0.161200] CPU1 attaching sched-domain:
[ 0.161202] domain 0: span 0-1 level MC
[ 0.161204] groups: group c1d03778 cpus 1 group c1c03778 cpus 0
[ 0.161264] devtmpfs: initialized
[ 0.161264] regulator: core version 0.5
[ 0.161264] NET: Registered protocol family 16
[ 0.161264] ACPI: bus type pci registered
[ 0.161264] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.161264] PCI: Not using MMCONFIG.
[ 0.161264] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.161264] PCI: Using configuration type 1 for base access
[ 0.161264] bio: create slab <bio-0> at 0
[ 0.161264] ACPI: EC: Look up EC in DSDT
[ 0.165967] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.170312] ACPI: Interpreter enabled
[ 0.170316] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.170337] ACPI: Using IOAPIC for interrupt routing
[ 0.170382] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.173486] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.173489] PCI: Using MMCONFIG for extended config space
[ 0.180426] ACPI: No dock devices found.
[ 0.180664] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.180770] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.180774] pci 0000:00:01.0: PME# disabled
[ 0.180831] pci 0000:00:1a.0: reg 20 io port: [0xb880-0xb89f]
[ 0.180877] pci 0000:00:1a.1: reg 20 io port: [0xbc00-0xbc1f]
[ 0.180929] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfcdffc00-0xfcdfffff]
[ 0.180988] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.180992] pci 0000:00:1a.7: PME# disabled
[ 0.181027] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfcdf8000-0xfcdfbfff]
[ 0.181078] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.181082] pci 0000:00:1b.0: PME# disabled
[ 0.181152] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181155] pci 0000:00:1c.0: PME# disabled
[ 0.181228] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.181231] pci 0000:00:1c.2: PME# disabled
[ 0.181303] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.181307] pci 0000:00:1c.3: PME# disabled
[ 0.181350] pci 0000:00:1d.0: reg 20 io port: [0xb400-0xb41f]
[ 0.181396] pci 0000:00:1d.1: reg 20 io port: [0xb480-0xb49f]
[ 0.181442] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
[ 0.181494] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfcdff800-0xfcdffbff]
[ 0.181552] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.181556] pci 0000:00:1d.7: PME# disabled
[ 0.181677] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.181732] pci 0000:00:1f.2: reg 10 io port: [0xa080-0xa087]
[ 0.181738] pci 0000:00:1f.2: reg 14 io port: [0xa000-0xa003]
[ 0.181743] pci 0000:00:1f.2: reg 18 io port: [0x9c00-0x9c07]
[ 0.181749] pci 0000:00:1f.2: reg 1c io port: [0x9880-0x9883]
[ 0.181754] pci 0000:00:1f.2: reg 20 io port: [0x9800-0x980f]
[ 0.181760] pci 0000:00:1f.2: reg 24 io port: [0x9480-0x948f]
[ 0.181784] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.181788] pci 0000:00:1f.2: PME# disabled
[ 0.181807] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfcdff400-0xfcdff4ff]
[ 0.181823] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.181860] pci 0000:00:1f.5: reg 10 io port: [0xb080-0xb087]
[ 0.181866] pci 0000:00:1f.5: reg 14 io port: [0xb000-0xb003]
[ 0.181871] pci 0000:00:1f.5: reg 18 io port: [0xac00-0xac07]
[ 0.181877] pci 0000:00:1f.5: reg 1c io port: [0xa880-0xa883]
[ 0.181882] pci 0000:00:1f.5: reg 20 io port: [0xa800-0xa80f]
[ 0.181888] pci 0000:00:1f.5: reg 24 io port: [0xa480-0xa48f]
[ 0.181912] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.181916] pci 0000:00:1f.5: PME# disabled
[ 0.181950] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.181959] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.181968] pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xde000000-0xdfffffff]
[ 0.181974] pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.181980] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfeb00000-0xfeb7ffff]
[ 0.182051] pci 0000:05:00.1: reg 10 32bit mmio: [0xfebfc000-0xfebfffff]
[ 0.182227] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.182230] pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfebfffff]
[ 0.182234] pci 0000:00:01.0: bridge 64bit mmio pref: [0xde000000-0xefffffff]
[ 0.182276] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xddf00000-0xddffffff]
[ 0.182319] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.182339] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xddeff000-0xddefffff]
[ 0.182352] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xddef8000-0xddefbfff]
[ 0.182420] pci 0000:02:00.0: supports D1 D2
[ 0.182422] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182427] pci 0000:02:00.0: PME# disabled
[ 0.188075] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.188082] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdde00000-0xddefffff]
[ 0.188132] pci 0000:01:00.0: reg 10 64bit mmio: [0xfceef800-0xfceeffff]
[ 0.188140] pci 0000:01:00.0: reg 18 io port: [0xc000-0xc0ff]
[ 0.188216] pci 0000:01:00.0: supports D2
[ 0.188218] pci 0000:01:00.0: PME# supported from D2 D3hot D3cold
[ 0.188222] pci 0000:01:00.0: PME# disabled
[ 0.188277] pci 0000:01:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.188285] pci 0000:01:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.188293] pci 0000:01:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.188301] pci 0000:01:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.188309] pci 0000:01:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.188322] pci 0000:01:00.1: reg 30 32bit mmio pref: [0xfcef0000-0xfcefffff]
[ 0.188377] pci 0000:01:00.1: supports D2
[ 0.188379] pci 0000:01:00.1: PME# supported from D2 D3hot D3cold
[ 0.188383] pci 0000:01:00.1: PME# disabled
[ 0.196098] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.196101] pci 0000:00:1c.3: bridge 32bit mmio: [0xfce00000-0xfcefffff]
[ 0.196127] pci 0000:04:00.0: reg 10 32bit mmio: [0xfcfffc00-0xfcfffdff]
[ 0.196181] pci 0000:04:01.0: reg 10 32bit mmio: [0xfcfff800-0xfcfff9ff]
[ 0.196253] pci 0000:00:1e.0: transparent bridge
[ 0.196259] pci 0000:00:1e.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff]
[ 0.196281] pci_bus 0000:00: on NUMA node 0
[ 0.196285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.196423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.196479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.196614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.196671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.196726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.209897] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.209998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.210097] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.210199] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.210299] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.210399] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.210499] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.210598] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.210689] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210695] vgaarb: loaded
[ 0.210708] PCI: Using ACPI for IRQ routing
[ 0.210708] Switching to clocksource tsc
[ 0.210708] pnp: PnP ACPI init
[ 0.210708] ACPI: bus type pnp registered
[ 0.211954] pnp: PnP ACPI: found 14 devices
[ 0.211956] ACPI: ACPI bus type pnp unregistered
[ 0.211959] PnPBIOS: Disabled by ACPI PNP
[ 0.211968] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.211975] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.211978] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.211981] system 00:06: ioport range 0x480-0x4bf has been reserved
[ 0.211984] system 00:06: ioport range 0x900-0x90f has been reserved
[ 0.211987] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.211990] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.211995] system 00:08: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.212000] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.212003] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.212008] system 00:0b: ioport range 0x280-0x28f has been reserved
[ 0.212011] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.212016] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.212022] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.212024] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.212027] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.212030] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.246747] pci 0000:00:01.0: PCI bridge, secondary bus 0000:05
[ 0.246750] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.246754] pci 0000:00:01.0: MEM window: 0xfd000000-0xfebfffff
[ 0.246758] pci 0000:00:01.0: PREFETCH window: 0x000000de000000-0x000000efffffff
[ 0.246762] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.246765] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.246770] pci 0000:00:1c.0: MEM window: 0x20000000-0x203fffff
[ 0.246774] pci 0000:00:1c.0: PREFETCH window: 0x000000ddf00000-0x000000ddffffff
[ 0.246780] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 0.246783] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.246787] pci 0000:00:1c.2: MEM window: 0x20400000-0x207fffff
[ 0.246791] pci 0000:00:1c.2: PREFETCH window: 0x000000dde00000-0x000000ddefffff
[ 0.246797] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.246800] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.246805] pci 0000:00:1c.3: MEM window: 0xfce00000-0xfcefffff
[ 0.246809] pci 0000:00:1c.3: PREFETCH window: 0x00000020800000-0x000000209fffff
[ 0.246815] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.246817] pci 0000:00:1e.0: IO window: disabled
[ 0.246821] pci 0000:00:1e.0: MEM window: 0xfcf00000-0xfcffffff
[ 0.246825] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.246837] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.246841] pci 0000:00:01.0: setting latency timer to 64
[ 0.246847] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.246851] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.246855] pci 0000:00:1c.0: setting latency timer to 64
[ 0.246863] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.246867] pci 0000:00:1c.2: setting latency timer to 64
[ 0.246875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.246878] pci 0000:00:1c.3: setting latency timer to 64
[ 0.246884] pci 0000:00:1e.0: setting latency timer to 64
[ 0.246888] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.246890] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.246893] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.246895] pci_bus 0000:05: resource 1 mem: [0xfd000000-0xfebfffff]
[ 0.246898] pci_bus 0000:05: resource 2 pref mem [0xde000000-0xefffffff]
[ 0.246900] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.246903] pci_bus 0000:03: resource 1 mem: [0x20000000-0x203fffff]
[ 0.246905] pci_bus 0000:03: resource 2 pref mem [0xddf00000-0xddffffff]
[ 0.246908] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.246910] pci_bus 0000:02: resource 1 mem: [0x20400000-0x207fffff]
[ 0.246913] pci_bus 0000:02: resource 2 pref mem [0xdde00000-0xddefffff]
[ 0.246915] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.246918] pci_bus 0000:01: resource 1 mem: [0xfce00000-0xfcefffff]
[ 0.246920] pci_bus 0000:01: resource 2 pref mem [0x20800000-0x209fffff]
[ 0.246923] pci_bus 0000:04: resource 1 mem: [0xfcf00000-0xfcffffff]
[ 0.246925] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.246927] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.246951] NET: Registered protocol family 2
[ 0.247024] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.247245] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.247295] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.247340] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.247343] TCP reno registered
[ 0.247401] NET: Registered protocol family 1
[ 0.247418] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.247433] pci 0000:00:1a.0: PCI INT A disabled
[ 0.247440] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.247454] pci 0000:00:1a.1: PCI INT B disabled
[ 0.247463] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247478] pci 0000:00:1a.7: PCI INT C disabled
[ 0.247488] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247503] pci 0000:00:1d.0: PCI INT A disabled
[ 0.247508] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.247522] pci 0000:00:1d.1: PCI INT B disabled
[ 0.247527] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.247542] pci 0000:00:1d.2: PCI INT C disabled
[ 0.247551] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.247563] pci 0000:00:1d.7: PCI INT A disabled
[ 0.247581] pci 0000:05:00.0: Boot video device
[ 0.247626] Unpacking initramfs...
[ 0.473017] Freeing initrd memory: 8528k freed
[ 0.480505] audit: initializing netlink socket (disabled)
[ 0.480523] type=2000 audit(1410605448.476:1): initialized
[ 0.483777] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.485106] VFS: Disk quotas dquot_6.5.2
[ 0.485156] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.485228] msgmni has been set to 1003
[ 0.485437] alg: No test for stdrng (krng)
[ 0.485486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.485489] io scheduler noop registered
[ 0.485491] io scheduler anticipatory registered
[ 0.485493] io scheduler deadline registered
[ 0.485524] io scheduler cfq registered (default)
[ 0.485640] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.485646] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.485737] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.485744] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.485850] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.485857] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.485961] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.485968] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.486129] isapnp: Scanning for PnP cards...
[ 0.839745] isapnp: No Plug & Play device found
[ 0.840912] Linux agpgart interface v0.103
[ 0.841044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.841439] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.841441] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.841947] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.842012] mice: PS/2 mouse device common for all mice
[ 0.842060] rtc_cmos 00:03: RTC can wake from S4
[ 0.842091] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.842114] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.842127] cpuidle: using governor ladder
[ 0.842128] cpuidle: using governor menu
[ 0.842132] No iBFT detected.
[ 0.842443] TCP cubic registered
[ 0.842575] NET: Registered protocol family 10
[ 0.843262] Mobile IPv6
[ 0.843265] NET: Registered protocol family 17
[ 0.843278] Using IPI No-Shortcut mode
[ 0.843332] PM: Resume from disk failed.
[ 0.843340] registered taskstats version 1
[ 0.843738] rtc_cmos 00:03: setting system clock to 2014-09-13 10:50:49 UTC (1410605449)
[ 0.843778] Initalizing network drop monitor service
[ 0.843802] Freeing unused kernel memory: 380k freed
[ 0.844068] Write protecting the kernel text: 2512k
[ 0.844089] Write protecting the kernel read-only data: 912k
[ 0.857234] udev[56]: starting version 164
[ 0.951494] usbcore: registered new interface driver usbfs
[ 0.951625] usbcore: registered new interface driver hub
[ 0.951755] usbcore: registered new device driver usb
[ 0.957170] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.957192] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.957228] r8169 0000:02:00.0: setting latency timer to 64
[ 0.957276] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[ 0.957857] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xe08ac000, bc:5f:f4:74:5c:85, XID 081000c0 IRQ 28
[ 0.969407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.969426] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.969440] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.969443] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.969460] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.969489] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.970095] SCSI subsystem initialized
[ 0.973359] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.980911] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfcdffc00
[ 0.985483] libata version 3.00 loaded.
[ 0.993310] pata_via 0000:01:00.1: version 0.3.4
[ 0.993328] pata_via 0000:01:00.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.993384] pata_via 0000:01:00.1: setting latency timer to 64
[ 0.993457] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.993587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.993590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.993592] usb usb1: Product: EHCI Host Controller
[ 0.993594] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 0.993596] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.993796] scsi0 : pata_via
[ 0.994554] scsi1 : pata_via
[ 0.994771] ata1: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 0.994774] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 0.995109] usb usb1: configuration #1 chosen from 1 choice
[ 0.995147] hub 1-0:1.0: USB hub found
[ 0.995154] hub 1-0:1.0: 4 ports detected
[ 0.995302] ata_piix 0000:00:1f.2: version 2.13
[ 0.995316] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.995321] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.998378] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.998421] firewire_ohci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.998427] firewire_ohci 0000:01:00.0: setting latency timer to 64
[ 1.076908] firewire_ohci: Added fw-ohci device 0000:01:00.0, OHCI version 1.10
[ 1.076945] firewire_ohci: swap not done yet
[ 1.076950] firewire_ohci: swap not done yet
[ 1.076954] firewire_ohci: swap not done yet
[ 1.160945] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.160984] scsi2 : ata_piix
[ 1.161037] scsi3 : ata_piix
[ 1.162334] ata3: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 19
[ 1.162339] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 19
[ 1.162376] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.162389] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.162392] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.162402] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.162430] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.166300] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.166312] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfcdff800
[ 1.180506] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.180525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180527] usb usb2: Product: EHCI Host Controller
[ 1.180529] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.180531] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.180600] usb usb2: configuration #1 chosen from 1 choice
[ 1.180627] hub 2-0:1.0: USB hub found
[ 1.180632] hub 2-0:1.0: 6 ports detected
[ 1.180687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.180695] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.180698] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.180705] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.180733] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b880
[ 1.180763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.180766] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180768] usb usb3: Product: UHCI Host Controller
[ 1.180770] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.180772] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.180833] usb usb3: configuration #1 chosen from 1 choice
[ 1.180858] hub 3-0:1.0: USB hub found
[ 1.180864] hub 3-0:1.0: 2 ports detected
[ 1.180915] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.180920] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.180954] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.180987] scsi4 : ata_piix
[ 1.181038] scsi5 : ata_piix
[ 1.182093] ata5: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
[ 1.182097] ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
[ 1.182142] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.182151] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.182154] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.182161] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.182193] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000bc00
[ 1.182219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182222] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182224] usb usb4: Product: UHCI Host Controller
[ 1.182226] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.182228] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.182290] usb usb4: configuration #1 chosen from 1 choice
[ 1.182316] hub 4-0:1.0: USB hub found
[ 1.182321] hub 4-0:1.0: 2 ports detected
[ 1.182363] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.182370] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.182373] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.182380] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.182400] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[ 1.182425] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182427] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182429] usb usb5: Product: UHCI Host Controller
[ 1.182431] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.182433] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.182492] usb usb5: configuration #1 chosen from 1 choice
[ 1.182516] hub 5-0:1.0: USB hub found
[ 1.182521] hub 5-0:1.0: 2 ports detected
[ 1.182566] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.182572] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.182575] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.182581] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.182602] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[ 1.182626] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182629] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182631] usb usb6: Product: UHCI Host Controller
[ 1.182633] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.182635] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.182689] usb usb6: configuration #1 chosen from 1 choice
[ 1.182713] hub 6-0:1.0: USB hub found
[ 1.182718] hub 6-0:1.0: 2 ports detected
[ 1.182761] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.182767] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.182770] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.182776] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.182797] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 1.182821] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182823] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182826] usb usb7: Product: UHCI Host Controller
[ 1.182828] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.182830] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.182884] usb usb7: configuration #1 chosen from 1 choice
[ 1.182908] hub 7-0:1.0: USB hub found
[ 1.182914] hub 7-0:1.0: 2 ports detected
[ 1.420509] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.510585] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.521163] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.553018] usb 1-4: New USB device found, idVendor=13fd, idProduct=0842
[ 1.553021] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.553024] usb 1-4: Product: USB Mass Storage Device
[ 1.553025] usb 1-4: Manufacturer: TSSTcorp
[ 1.553027] usb 1-4: SerialNumber: SATASLIM00003007816
[ 1.553093] usb 1-4: configuration #1 chosen from 1 choice
[ 1.559460] Initializing USB Mass Storage driver...
[ 1.559532] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.559605] usbcore: registered new interface driver usb-storage
[ 1.559605] USB Mass Storage support registered.
[ 1.559608] usb-storage: device found at 3
[ 1.559609] usb-storage: waiting for device to settle before scanning
[ 1.580054] firewire_core: created device fw0: GUID 008f1300c94a1300, S400
[ 1.580061] firewire_ohci: swap not done yet
[ 1.580066] firewire_ohci: swap not done yet
[ 1.580070] firewire_ohci: swap not done yet
[ 1.720012] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.889290] usb 4-1: New USB device found, idVendor=0471, idProduct=0815
[ 1.889293] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.889295] usb 4-1: Product: eHome Infrared Transceiver
[ 1.889297] usb 4-1: Manufacturer: Philips
[ 1.889299] usb 4-1: SerialNumber: PH00MKdN
[ 1.889355] usb 4-1: configuration #1 chosen from 1 choice
[ 1.960054] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.960064] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 1.960230] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.960240] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 1.968298] ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 1.968302] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.969357] ata3.00: ATA-7: Maxtor 6L080M0, BACE1G10, max UDMA/133
[ 1.969360] ata3.00: 160086528 sectors, multi 0: LBA NCQ (depth 0/32)
[ 1.976328] ata4.00: configured for UDMA/133
[ 1.985142] ata3.00: configured for UDMA/133
[ 1.985240] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L080M0 BACE PQ: 0 ANSI: 5
[ 1.985409] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 1.993072] sd 2:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.993127] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.993130] sd 2:0:0:0: [sda] Write Protect is off
[ 1.993132] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.993157] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.993180] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.993182] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.993204] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.993317] sda:
[ 1.993411] sdb: sdb1
[ 2.004841] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.027955] sda1 sda2 < sda5 >
[ 2.060590] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.132012] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.309745] usb 6-2: New USB device found, idVendor=046d, idProduct=c31c
[ 2.309748] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.309750] usb 6-2: Product: USB Keyboard
[ 2.309752] usb 6-2: Manufacturer: Logitech
[ 2.309821] usb 6-2: configuration #1 chosen from 1 choice
[ 2.347205] usbcore: registered new interface driver hiddev
[ 2.362016] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input0
[ 2.362060] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.401832] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input1
[ 2.401863] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 2.401878] usbcore: registered new interface driver usbhid
[ 2.401881] usbhid: v2.6:USB HID core driver
[ 2.494646] PM: Starting manual resume from disk
[ 2.494649] PM: Resume from partition 8:5
[ 2.494651] PM: Checking hibernation image.
[ 2.494768] PM: Error -22 checking image file
[ 2.494770] PM: Resume from disk failed.
[ 2.565895] kjournald starting. Commit interval 5 seconds
[ 2.565904] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.172063] udev[433]: starting version 164
[ 4.518551] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.942675] processor LNXCPU:00: registered as cooling_device0
[ 4.942855] processor LNXCPU:01: registered as cooling_device1
[ 4.942981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.943024] ACPI: Power Button [PWRB]
[ 4.943228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.943253] ACPI: Power Button [PWRF]
[ 5.440375] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.149914] nvidia: module license 'NVIDIA' taints kernel.
[ 6.149918] Disabling lock debugging due to kernel taint
[ 6.495139] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.495154] nvidia 0000:05:00.0: setting latency timer to 64
[ 6.495158] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.495435] NVRM: loading NVIDIA UNIX x86 Kernel Module 340.32 Tue Aug 5 20:09:46 PDT 2014
[ 6.502790] saa7146: register extension 'budget dvb'.
[ 6.502820] budget dvb 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.502837] IRQ 21/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.502845] saa7146: found saa7146 @ mem e2212c00 (revision 1, irq 21) (0x1131,0x4f60).
[ 6.502849] saa7146 (0): dma buffer size 192512
[ 6.502851] DVB: registering new adapter (Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend))
[ 6.537376] adapter failed MAC signature check
[ 6.537378] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 6.556303] usb-storage: device scan complete
[ 6.557922] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S084C TS01 PQ: 0 ANSI: 0
[ 6.693546] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.693549] Uniform CD-ROM driver Revision: 3.20
[ 6.693632] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 6.930215] Linux video capture interface: v2.00
[ 7.046175] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.046298] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.046781] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 7.126168] saa7146: register extension 'budget_av'.
[ 7.128234] budget: tuner ALPS BSRU6 detected
[ 7.128238] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 7.128371] budget_av 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.128393] IRQ 22/: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.128412] saa7146: found saa7146 @ mem e24f4800 (revision 1, irq 22) (0x1131,0x4f56).
[ 7.128417] saa7146 (1): dma buffer size 192512
[ 7.128419] DVB: registering new adapter (KNC1 DVB-S)
[ 7.168871] adapter failed MAC signature check
[ 7.168874] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 7.209075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.209135] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[ 7.209156] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.254539] HDA Intel 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.254542] hda_intel: Disable MSI for Nvidia chipset
[ 7.254568] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 7.432346] KNC1-1: MAC addr = 00:09:d6:64:02:2a
[ 7.740183] DVB: registering adapter 1 frontend 0 (ST STV0299 DVB-S)...
[ 7.740279] budget-av: ci interface initialised.
[ 8.628207] Adding 1002488k swap on /dev/sda5. Priority:-1 extents:1 across:1002488k
[ 8.860736] EXT3 FS on sda1, internal journal
[ 9.067401] loop: module loaded
[ 9.510198] kjournald starting. Commit interval 5 seconds
[ 9.510471] EXT3 FS on sdb1, internal journal
[ 9.510475] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.655558] fuse init (API version 7.13)
[ 12.225456] RPC: Registered udp transport module.
[ 12.225458] RPC: Registered tcp transport module.
[ 12.225460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.362097] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.035800] svc: failed to register lockdv1 RPC service (errno 97).
[ 13.036694] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.064923] NFSD: starting 90-second grace period
[ 16.602005] Bluetooth: Core ver 2.15
[ 16.602041] NET: Registered protocol family 31
[ 16.602106] Bluetooth: HCI device and connection manager initialized
[ 16.602109] Bluetooth: HCI socket layer initialized
[ 16.759463] Bluetooth: L2CAP ver 2.14
[ 16.759465] Bluetooth: L2CAP socket layer initialized
[ 16.953787] lp: driver loaded but no devices found
[ 17.099610] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.099613] Bluetooth: BNEP filters: protocol multicast
[ 17.122519] ppdev: user-space parallel port driver
[ 17.276244] Bridge firewalling registered
[ 17.426930] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.426933] Bluetooth: SCO socket layer initialized
[ 17.619187] nvidia 0000:05:00.0: irq 30 for MSI/MSI-X
[ 20.446430] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-1.fw
[ 20.558842] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[ 20.566727] r8169 0000:02:00.0: eth0: link down
[ 20.566775] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.296103] r8169 0000:02:00.0: eth0: link up
[ 22.296139] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.244005] eth0: no IPv6 routers present

dann der inhalt des X-Logs:

Display Spoiler

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
Current Operating System: Linux wzvdr 2.6.32-5-686 #1 SMP Tue May 13 16:33:32 UTC 2014 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c69127b0-06d5-4703-81ed-f71863490581 ro quiet
Build Date: 17 December 2013 08:26:59PM
xorg-server 2:1.7.7-18 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 12 15:28:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81eccc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:5:0:0) 10de:0fc6:1458:362b nVidia Corporation rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 340.32 Tue Aug 5 20:36:43 PDT 2014
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:14 PDT 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Sep 12 15:28:46 NVIDIA(0): Enabling 2D acceleration
(II) Sep 12 15:28:47 NVIDIA(0): NVIDIA GPU GeForce GTX 650 (GK107) at PCI:5:0:0 (GPU-0)
(--) Sep 12 15:28:47 NVIDIA(0): Memory: 2097152 kBytes
(--) Sep 12 15:28:47 NVIDIA(0): VideoBIOS: 80.07.35.00.9d
(II) Sep 12 15:28:47 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Sep 12 15:28:47 NVIDIA(0): Valid display device(s) on GeForce GTX 650 at PCI:5:0:0
(--) Sep 12 15:28:47 NVIDIA(0): CRT-0
(--) Sep 12 15:28:47 NVIDIA(0): DFP-0
(--) Sep 12 15:28:47 NVIDIA(0): LG Electronics LG TV (DFP-1) (boot, connected)
(--) Sep 12 15:28:47 NVIDIA(0): DFP-2
(--) Sep 12 15:28:47 NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): DFP-0: Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): LG Electronics LG TV (DFP-1): Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): LG Electronics LG TV (DFP-1): 340.0 MHz maximum pixel clock
(--) Sep 12 15:28:47 NVIDIA(0): DFP-2: Internal TMDS
(--) Sep 12 15:28:47 NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
(**) Sep 12 15:28:47 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) Sep 12 15:28:47 NVIDIA(0): device LG Electronics LG TV (DFP-1) (Using EDID
(**) Sep 12 15:28:47 NVIDIA(0): frequencies has been enabled on all display devices.)
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "720x576".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (27.0 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (24.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (25.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (30.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's HorizSync (15.6 kHz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): HorizSync check for mode "720x576".
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): The EDID for LG Electronics LG TV (DFP-1) contradicts itself:
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): EDID's valid VertRefresh range (58.000-62.000 Hz) would
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
(WW) Sep 12 15:28:47 NVIDIA(GPU-0): VertRefresh check for mode "720x576".
(==) Sep 12 15:28:47 NVIDIA(0):
(==) Sep 12 15:28:47 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Sep 12 15:28:47 NVIDIA(0): will be used as the requested mode.
(==) Sep 12 15:28:47 NVIDIA(0):
(II) Sep 12 15:28:47 NVIDIA(0): Validated MetaModes:
(II) Sep 12 15:28:47 NVIDIA(0): "DFP-1:nvidia-auto-select"
(II) Sep 12 15:28:47 NVIDIA(0): Virtual screen size determined to be 1920 x 1080
(--) Sep 12 15:28:47 NVIDIA(0): DPI set to (30, 30); computed from "UseEdidDpi" X config
(--) Sep 12 15:28:47 NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) Sep 12 15:28:47 NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
(II) Sep 12 15:28:47 NVIDIA: access.
(II) Sep 12 15:28:47 NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
(II) Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Keyboard: always reports core events
(**) Logitech USB Keyboard: Device: "/dev/input/event0"
(II) Logitech USB Keyboard: Found keys
(II) Logitech USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
(**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Keyboard: always reports core events
(**) Logitech USB Keyboard: Device: "/dev/input/event1"
(II) Logitech USB Keyboard: Found absolute axes
(II) Logitech USB Keyboard: Found keys
(II) Logitech USB Keyboard: Configuring as mouse
(II) Logitech USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) Logitech USB Keyboard: initialized for absolute axes.
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Sep 12 15:46:31 NVIDIA(GPU-0): Deleting GPU-0

zu guter letzt die alsa-infos....

Display Spoiler

bin gespannt wie ein flitzebogen...

liebe grüße
kolibri

mtron · Sep 14th 2014

ja schon besser aber passt noch nicht ganz. controls der nvidia karte fehlen und soweit ich gesehen habe werden keine device nodes für nvidia hdmi angelegt. Da dein Treiber (NVIDIA UNIX 340.32) leicht neu genug sein müsste weiss ich nicht so recht woran es bei dir hackt. ich kann dir nur empfehlen da mit dem debuggen weiter zu machen http://wiki.ubuntuusers.de/Soundkarten_konfigurieren und wenn du mit speaker-test einen ton bekommst bastel dir eine passende asound.conf

Kann ein nvidia user bitte mal nachschauen welche alsa module da geladen sein müssen? snd-hda-intel ist klar, aber braucht es noch ein alsa modul für die nvidia Karte?

Share