rofafor
Thanks for the new Version. But I have a Problem. After the VDR start everything in the Log looks ok, but after one minute it is flooded with the following message:
Well, you'd better bisect the offending commit.
BR,
Rofa
[vdr-plugin-satip] this and that
-
-
-
??? I do not understand ???
Du sollst im Bisektionsverfahren den Commit raussuchen, der für die Regression verantwortlich ist.http://de.wikipedia.org/w/index.php?title=Bisektion
Oder einfach so lange in der Commit-Historie zurückgehen bis es wieder funktioniert.
-
-
Alles anzeigen
Thanks for the new Version. But I have a Problem. After the VDR start everything in the Log looks ok, but after one minute it is flooded with the following message:
[code]Jan 10 19:30:07 [vdr] [12122] SATIP-ERROR: Detected invalid status code 404: rtsp://192.168.178.71/ [device 2]
Jan 10 19:30:07 [vdr] [12122] SATIP-ERROR: Connect failed [device 2]
Jan 10 19:30:07 [vdr] video/vdpau: synced after 41 frames_
Jan 10 19:30:08 [vdr] [12122] SATIP-ERROR: Detected invalid status code 404: rtsp://192.168.178.71/ [device 2]
Sorry, but the new version works fine with my Telestar Digibit (same hardware as your Grundig GSS 400). No Regressions. -
Thanks for your test. Tomorrow I will look from which Commit Version I have the messages in the log.
PS: Which firmware do you have on your box?
Regards
-
PS: Which firmware do you have on your box?
V1.17.0.120 -
Code
V1.17.0.120Hmmm, i can´t update via webinterface. This Firmware Version is not available. Do you have any idea how i can get this firmware on my box?
Regards
-
Code
V1.17.0.120Hmmm, i can´t update via webinterface. This Firmware Version is not available. Do you have any idea how i can get this firmware on my box?
I installed IDL400S_V1_16_0_120.zip from http://www.inverto.tv/support/Then the update to 1.17 will be offered.
-
Hmmm, I could not produce the mistake any more. I think the box came anyhow in a mess.
It has not worked
Regards
-
Which firmware version of the OctopusNET is recommended right now? I'm still running 1.0.29 as I read about problems with later versions, have these been confirmed/addressed already?
-
A new version 1.0.1 is now available containing hotfixes.
OctopusNet owners might want to test the integrated CI:
1) Use the attached storepmtpid patch
2) Compile the plugin: make install SATIP_XCI=1Used your patch, but still no success whit streamdev and encrypted channels. I enabled PAT PMT DEBUG. For example when i switch to TNT Serie, i see this in my log.
@other users
Is streamdev/live tv working for you with encrypted channels/dvb*** on your devices?
When i did the last test on my LiveTV machine, i could see, that the VDR is not using the first device and switching to the second SAT/IP device, when i try to watch an encrypted channel.
-
-
Used your patch, but still no success whit streamdev and encrypted channels. I enabled PAT PMT DEBUG. For example when i switch to TNT Serie, i see this in my log.
Did you remember to enable the CI extension in the setup menu?Codesvdrpsend plug satip trac 0x410 -
And I have the impression that the switching time with the new version have become even quicker.
Correct. The root cause for failing channel descrambling was too relaxed tuning state machine. I thought it would have make Inverto OEM devices a bit more stable, but it had nasty effects for PAT/PMT parsing in most of setups. -
Which firmware version of the OctopusNET is recommended right now? I'm still running 1.0.29 as I read about problems with later versions, have these been confirmed/addressed already?
According to README since vdr-plugin-satip v1.0.0:
Code- OctopusNet firmware 1.0.40 or greater recommended.
AFAIR v1.0.x does work properly only with that firmware version. I don't face any issues with that version ...The decryption issues are all solved with v1.0.1, for luck I had also a problematic installation at some point and could proof that forth and back ...
Regards
fnu -
Did you remember to enable the CI extension in the setup menu?Codesvdrpsend plug satip trac 0x410I do not have a CI extension, still Inverto iLNB
Here another log with trac 0x0410.
But maybe the Firmware is crap, if it works for other users.
-
I do not have a CI extension, still Inverto iLNB
Here another log with trac 0x0410.
Your log looks quite good in satip wise: VDR finds the channel PMT and no timeouts. -
Your log looks quite good in satip wise: VDR finds the channel PMT and no timeouts.Decryption seems to work on my LiveTV machine without streamdev. So maybe streamdev could be the problem? I will continue testing your plugin on my LiveTV machine.
-
For everyone having problems with streamdev and decryption, please try if increasing TS_SCRAMBLING_TIMEOUT in the VDR's device.c makes a difference. I had a problem with EMM processing some time ago and it turned out vdr stopped sending data to the decryption plugin too early.
![:]](https://www.vdr-portal.de/images/smilies/pleased.gif "Freude"){kind=small}
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!