LinVdr 0.5, Pundit und WakeUp

  • Ja, ich hoffe die 0.6 Version wird dann wieder NFS und zusaetzlich
    nvram enthalten.
    Die vielen patches und version sind ja schoen und gut, aber machen
    den Aufbau nicht leichter.
    Sicher jeder will natuerlich ´sein´ eigenen Linvdr, aber dann
    kann man ja auch auf ctvdr ausweichen (will aber bei linvdr bleiben ;-))


    Sound (Onboard) geht nun auf meinem Pundit mit der Hilfe
    von 'rell' auch (danke nochmals fuer die tolle anleitung)


    Gruss
    Leo

    Hardware: Asus P5G41T-M LX, Gigabyte GeForce GT220, Digital Devices Cine S2 V6 & TechnoTrend Budget S2-1600, Hama MCE Remote Control
    Software: yaVDR 0.7 & neuste updates (
    ppa:yavdr/stable-vdr)
    Aktuell: yaVDR ansible

  • Servus,


    Zitat

    Ja, ich hoffe die 0.6 Version wird dann wieder NFS und zusaetzlich
    nvram enthalten.


    NFS ist doch längst in der 0.5 drin, wo liegt das Problem?
    Die 0.6 wird (auf vielfachen Wunsch und damit ihr nicht wieder Kernel compilieren müsst) lediglich das Kernel-Modul nvram.o enthalten, mehr aber auch nicht.


    Viele Grüße, Mirko

  • Zitat

    NFS ist doch längst in der 0.5 drin, wo liegt das Problem?


    Ja,


    im original linvdr 0.5 ist NFS schon drin, aber wenn ich dann (wie von
    'rell' vorgeschlagen) dann auf kernel 2.4.21 downgrade (die 0.5er hat ja den 2.4.23 kernel) um nvram 0.4 einzustzen, dann habe ich kein NFS
    mehr.


    Ich selber brauche also einen 2.4.23 Kernel (mit NFS) und nvram
    als kernel module. Aber so wie ich das mitbekommen habe, sollte das
    mit der version 0.6 gehen.


    Gruss
    Leo

    Hardware: Asus P5G41T-M LX, Gigabyte GeForce GT220, Digital Devices Cine S2 V6 & TechnoTrend Budget S2-1600, Hama MCE Remote Control
    Software: yaVDR 0.7 & neuste updates (
    ppa:yavdr/stable-vdr)
    Aktuell: yaVDR ansible

  • Servus Leo,


    Zitat

    Ich selber brauche also einen 2.4.23 Kernel (mit NFS) und nvram
    als kernel module. Aber so wie ich das mitbekommen habe, sollte das
    mit der version 0.6 gehen.


    Ja, das hab ich ja nun schon mehrfach angekündigt. Aber es wird definitiv nicht Kernel 2.4.23, sondern ein anderer (welcher genau, werden wir wohl erst kurz vor Release entscheiden). Einen festen Release-Termin haben wir übrigens nicht, ich rüste mich derzeit, auf der CeBIT noch LinVDR 0.5 zu zeigen.


    Viele Grüße, Mirko

  • Joh...und wie installiert man das jetzt, daß neue Bios??? Die AFlasher gehen ja davon aus, daß man ein Floppylaufwerk A: hat und unter DOS bootet. Hmmm...hat der Pundit halt mal nicht....ein Floppy LW?! Jemand eine Idee? Gehts eventuell auch von einem USBSTICK? Oder steh ich nur auf der Leitung...


    Gruß
    Norbert

    Einmal editiert, zuletzt von iNOB ()

  • iNOB
    na ein bisschen stehste schon drauf ;)
    dat teil hat doch nen cd/dvd lw, sonst hätteste doch auch nicht linvdr installieren können. also nimmste dir irgendeine boot-cd (z.b. win98), haust das asusflashtool und das bios mit drauf und fertig. ist doch ganz einfach, oder hab ich da jetzt was falsch verstanden?


    denke zumindest, das das kein problem ist, aber trotzdem würde ich dir nicht unbedingt dazu raten.


    erstens haben denke ich fast alle die 1005er version drauf, obwohl die 6er schon ein halbes jahr alt ist. der grund ist der, das in der nvram das board nur bis zur version 1006 drin steht. an der konfiguration dürfte das bios zwar nichts ändern, da eh nur der support für ein paar neue cpus hinzukamen, und somit müßte man theoretisch nur die nvram um ein paar zeilen ergänzen, trotzdem wär mir das ganze zu riskant, daß es eventuell hinterher nicht mehr funktioniert.


    in diesem sinne...

  • Hallo Ich habe da mal einige Fragen zu der Anleitung.
    Gilt die Anleitung auch für andere Motherboards ich habe ein Abit BH6. Ich habe die ersten beiden Punkte ausgeführt das hat soweit funktioniert.
    Als ich Punkt 3 ausgeführt habe hatte es nur den Efekt das der Rechner mit der Powerofftaste auf der Fernbedienung nicht mehr abschaltet.
    Mit punkt 4 und 6 konnte ich nichts anfangen. Was heißt depmode –a meine Netzwerkkarte ist eine 8139too.
    Kann mir jemand sagen was ich falsch gemacht habe weil bis jetzt geht noch garnichts. Wenn ich einen Timer setzte und den Rechner runter fahre ändert sich im BIOS der Eintrag für Datum und Uhrzeit nicht.
    Wenn ich das im BIOS von Hand eintrage fährt der Rechner pünktlich hoch.
    Ich habe ein Award BIOS.

    VDR: easyvdr 2.0 stable Gehäuse: Thermaltake DH-102 mit 7"-Touch-TFT Board:
    Asus P5N7A-VM CPU: Intel Core2Duo 3.00MHz E8400 CPU-Lüfter: Scythe
    Shuriken rev.B Arbeitsspeicher: 2 x 1 GB DDR2-800 Kingston HyperX
    Festplatten:
    1x 1 TB Western Digital Caviar Green SATA TV-Karte: Digital Devices
    Cine S2 Rev 5.5 Duale DVB-S2 Laufwerk: LG DVD-Brenner IDE Netzteil: BeQuiet
    STRAIGHT POWER 450W E7 mit temperaturabhängiger Regelung für
    Gehäuselüfter

  • Hallo miepel!
    Die Anleitung ist nur für den Pundit. Wenns mit anderen Mainboards funktioniert, ist das reiner Zufall. "depmode -a" muß ich aus der Anleitung raus nehmen, das braucht man gar nicht. Und mit dem Kernelmodul bcm4400 kannst du natürlich nichts anfangen, weils ja für das Pundit-Onboard-Lan ist. Den Schritt musste ich machen, weil das Lan nach dem Kernel-downgrade nur noch funktionierte, wenn dieses Modul geladen wird. Im 2.4.23er Kernel ist es im Kernel integriert. Das muß aber bei dir nicht so sein. Mit "lsmod" kannst du überprüfen, ob deine Netzwerkkarte geladen wird.


    Die Bios-Einstellungen können bei dir auch ganz anders sein, da mußt du im Board nach nvram und deinem MB suchen. Dann findest Du vielleicht auch, wie und ob dein Board überhaupt so einfach mit nvram funktioniert...


    Gruß,
    Andreas

  • hallo leute!


    ich hab jetzt auf meinen pundit die nvram draufgemacht nach der anleitung von andreas baierl.


    jetzt hab ich ein problem. der vdr startet immer wieder. folgendes hab ich im logread gefunden, sagt euch das was? was hab ich denn da wieder falsch gemacht?


    depmode -a wegen des bcm4400 ergab bei mir ein "command not found", das netzwerk funktioniert trotzdem.


    danke
    charly


    Mar 11 19:59:14 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 19:59:14 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 19:59:14 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 19:59:22 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 19:59:22 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 19:59:23 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 19:59:23 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 19:59:25 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 19:59:25 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 19:59:25 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 19:59:25 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 19:59:33 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 19:59:33 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 19:59:34 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 19:59:34 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 19:59:37 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 19:59:37 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 19:59:37 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 19:59:37 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 19:59:44 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 19:59:44 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 19:59:46 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 19:59:46 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 19:59:48 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 19:59:48 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 19:59:48 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 19:59:48 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 19:59:56 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 19:59:56 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 19:59:57 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 19:59:57 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 19:59:59 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 19:59:59 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 19:59:59 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 19:59:59 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:00:01 linvdr cron.notice crond[72]: USER root pid 1631 cmd convert.pl -q -s
    Mar 11 20:00:07 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:00:07 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:00:08 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:00:08 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:00:10 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:00:10 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:00:10 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:00:10 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:00:18 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:00:18 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:00:19 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:00:19 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:00:21 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:00:21 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:00:21 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:00:21 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:00:29 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:00:29 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:00:30 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:00:30 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:00:33 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:00:33 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:00:33 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:00:33 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:00:40 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:00:40 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:00:42 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:00:42 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:00:44 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:00:44 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:00:44 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:00:44 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:00:52 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:00:52 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:00:53 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:00:53 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:00:55 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:00:55 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:00:55 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:00:55 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:03 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:03 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:01:04 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:01:04 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:01:06 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:01:06 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:01:06 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:01:06 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:14 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:14 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:01:15 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:01:15 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:01:17 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:01:17 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:01:17 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:01:17 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:25 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:25 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:01:26 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:01:26 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:01:29 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:01:29 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:01:29 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:01:29 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:36 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:36 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:01:37 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:01:37 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:01:40 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:01:40 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:01:40 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:01:40 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:48 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:48 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:01:49 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:01:49 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:01:51 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:01:51 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:01:51 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:01:51 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:01:59 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:01:59 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:02:00 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:02:00 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:02:02 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:02:02 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:02:02 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:02:02 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:02:10 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:02:10 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:02:11 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:02:11 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:02:13 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:02:13 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:02:13 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:02:13 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:02:21 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:02:21 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:02:22 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:02:22 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:02:24 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:02:24 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:02:25 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:02:25 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:02:32 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:02:32 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:02:33 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:02:33 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:02:36 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:02:36 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:02:36 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:02:36 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa
    Mar 11 20:02:43 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Mar 11 20:02:44 linvdr syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Mar 11 20:02:45 linvdr syslog.warn klogd: stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Mar 11 20:02:45 linvdr syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Mar 11 20:02:47 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Mar 11 20:02:47 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Mar 11 20:02:47 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Mar 11 20:02:47 linvdr syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 or 2.2 adapter 0 has MAC addr = 00:d0:5c:22:f3:aa

    Zotac Ion ITX mit Celeron (CULV) und Geforce 9, L4m Twin, Atric Rev. 4, OneForAll URC 7960, YAVDR 0.5 stable mit Diseqc, ADATA 40 GB SSD, 1,5 TB Seagate

    Einmal editiert, zuletzt von charly144 ()

  • depmode -a brauchst du nicht.


    Da bist du wohl in einer Schleife in der runvdr.
    Hast du NVRAM auf eine "nackte" LinVDR-Installation gemacht?


    Syntaxfehler in der runvdr? Wie hast du sie editiert?
    Schmeckt ihm die timers.conf nicht?


    Gruß,
    Andreas

  • charly144


    bei mir hat die Anleitung auch nicht funktioniert. Bin jedesmal wieder in einer Schleife hängengeblieben. Egal mit welchem Editor ich da was gepinselt habe, Ergebnis war immer die Dauerscheife.


    Dann hab ich mir gedacht, versuchs doch einfach mal nur mit einer blanken LinVDR0.5, dem Patch von Marc Twain (siehe Signatur) und einer ordentlichen Bioseinstellung. Und siehe da es funzt auch ohne NVRAM, nur mit ACPI !!!!


    Werde am Wochenende mal meine BIOS-Einstellungen posten, bis denne!


    Gruß
    Norbert

  • hi jungs!


    danke mal für eure antwort.


    ich hab die runvdr mit nano editiert. ich hatte da schon mal probleme, als ich meine channels.conf mit nano editiert hatte. der dürfte irgendwelche kranken tags verwenden.


    hab ich da sonst noch eine möglichkeit zu editieren, vielleicht über putty irgendwie das file rausholen, ....????


    nackt find ich gut *gg*...... was meint ihr mit nackt, ...vielleicht keine plugins. ich hab das aktuellste pip,ac3... von marctwain drauf.


    danke mal
    charly

    Zotac Ion ITX mit Celeron (CULV) und Geforce 9, L4m Twin, Atric Rev. 4, OneForAll URC 7960, YAVDR 0.5 stable mit Diseqc, ADATA 40 GB SSD, 1,5 TB Seagate

  • charly144


    Ich editiere immer mit dem Midnight Commander und hatte noch nie Probleme.


    In diesem Thread hat auch einer die runvdr mit nano bearbeitet und ist in einer Schleife gelandet.


    iNOB


    Startet er bei dir pünktlich?
    Startet er auch nur an dem Tag der Aufnahme oder jeden Tag? Das Problem hatte ich nämlich.


    Gruß,
    Andreas

  • hi rell!


    kannst du mir einfach deine runvdr reinstellen, dann kopiere ich sie einfach in mein verzeichnis und pasta!!!!!


    sollte doch funzen, oder?


    danke

    Zotac Ion ITX mit Celeron (CULV) und Geforce 9, L4m Twin, Atric Rev. 4, OneForAll URC 7960, YAVDR 0.5 stable mit Diseqc, ADATA 40 GB SSD, 1,5 TB Seagate

  • Anbei meine runvdr.

  • rell


    also bei mir gehts so, wie man es erwartet. Hab im BIOS einfach mal unter "Power Up Control / Automatic Power Up" den Wert auf "By Date" gestellt (Uhrzeit und Datum eingegeben).


    Zusätzlich noch das Shutdown-Script /usr/bin/poweroff.pl etwas abändern:


    code:


    sub setAlarm {
    my $Next = shift;
    $Next = $Next - (5 * 60);
    setTime();


    Und fertig!


    Gruß
    Norbert

    Einmal editiert, zuletzt von iNOB ()


  • wozu die änderung, ...... was bringt denn das???

    Zotac Ion ITX mit Celeron (CULV) und Geforce 9, L4m Twin, Atric Rev. 4, OneForAll URC 7960, YAVDR 0.5 stable mit Diseqc, ADATA 40 GB SSD, 1,5 TB Seagate

  • hallo zusammen


    ich habe linvdr 0.6 und seit dem ich von 0.5 auf 0.6 upggedatet habe
    funzt die wake up funktion bei gesetztem timer nicht mehr.
    ich habe festgestellt, dass bei gewähltem timer die zeit nicht in
    der /proc/acpi/alarm/ übernommen wird. dort steht eine alte timer zeit drin.erst wenn ich mit
    echo 2004-11-25 15:10:00 > /proc/acpi/alarm
    die zeit per hand umstelle fährt der rechner hoch und startet die aufnahme.


    --directisa habe ich in der /etc/init... und der /usr/bin.. ebenfalls
    geändert.


    hat jemand eine idee, wie die wake up zeit richtig übernommen wird


    vielen dank


    stefan

    Mahlzeit 4.0beta2, Hauppauge Nexus mit silberner FB,
    MSI Hermes 845VG, CPU Celeron 2400, 256 MB Arbeitsspeicher,
    Platte: 160GB, DVD-Brenner

    2 Mal editiert, zuletzt von arizonabully ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!